|
|
QC / TP - Tool Changer
These medium and light duty tool changers offer an excellent weight to payload ratio. They were designed with an exceptional repeatability, high rigidity and load capacity to make them ideal for any robotic application
1. The QC series can be delivered with an integrated I/O block and can accomodate one optional module
2. Integrated air connection save space and money
3. The design allows the two halves to couple at up to a 0.1" [2.5mm] gap and to be safe in case of air failure
|
|
AU - Emergency Stop Device
Range of 5 models of Emergency stop modules
* Easy to install and to use
* Wide range of loading force and capacities
AUR - Resettable Emergency Stop Device
Range of 2 models of ressetable emergency stop modules
* Easy to reset due to our patented mechanism
* Easy to install and to use
* Wide range of loading force and capacities
ULS - Emergency Stop Module
The ULS series load limiter protects the machine and parts from overloads caused by collisions, excessive loading, or programming errors by providing a coupling that separates before pre-determined limits are exceeded thus shutting down the operation.
* Prevents robot damage caused by excessive overloading, collision, or programming errors
* High payload to weight and size ratio
* Variable overload setting
* Built-in sensors are factory set and never need adjustment
|
|
|
|
|
|
QC / TP - Tool Changer
These medium and light duty tool changers offer an excellent weight to payload ratio. They were designed with an exceptional repeatability, high rigidity and load capacity to make them ideal for any robotic application
- The QC series can be delivered with an integrated I/O block and can accomodate one optional module
- Integrated air connection save space and money
- The design allows the two halves to couple at up to a 0.1" [2.5mm] gap and to be safe in case of air failure
RHC - Robotic Tool Changer
Facilitates the changing of end effector tooling on robots to accommodate the assembly of many different parts on the same assembly machine. Multiple pneumatic connections and optional electrical contacts make the RHC series an excellent choice.
- Conical seat provides easy connection with tool adapter and increased payloads
- Made from 7057-T6 aircraft quality aluminum, hardcoat to RC60. Teflon impregnated for maximum wear resistance
- Failsafe locking mechanism maintains connection even with the loss of air
- Unique latching mechanism pulls the tool plate into the body, preloading the tool plate for excellent rigidity
|
|
|
|
|
|
QC / TP - Tool Changer
These medium and light duty tool changers offer an excellent weight to payload ratio. They were designed with an exceptional repeatability, high rigidity and load capacity to make them ideal for any robotic application
The QC series can be delivered with an integrated I/O block and can accomodate one optional module
Integrated air connection save space and money
The design allows the two halves to couple at up to a 0.1" [2.5mm] gap and to be safe in case of air failure
RQC / RTP - Tool Changer
Our modular robot tool changers lead the industry with a full product line covering up to 1200lbs [545Kg]. A wide variety of utilities are available to quick disconnect, I/O, air, water, weld power, servo power, vacuum lines.
The RQC series offer a high level of flexibility accomodating up to 4 optional modules to be picked up among a wide choice
The 6 rollers patented mechanism provides a low stress, highly rigid locking capability
The design allows the two halves to couple at up to a 0.1" [2.5mm] gap and to be safe in case of air failure
Both halves uses an Iso pattern that allow a direct mounting on robot arm
|
|
DMM - DirectConnect Slide Mounting Modules
These pre-engineered mounting modules are designed to provide a simple and sturdy solution for mounting DIRECTCONNECT Base Slides and Thrusters. Select from 10 different design styles in 3 sizes. Simply specify style, beam size, and basic dimensions.
Simple and sturdy solution for mounting DirectConnect base slides and thrusters
Pre-engineered designs save you time and money
Individual components allow you to design your own modules
Customize with add-on kits and accessories
|
|
|
|
|
|
CH - Horizontal Compliance Device
Range horizontal compliance including five models. The CH series allow to compensate horizontal misalignment.
- Stroke range from 6 to 24mm
-Options : spring safety (RA ou RL), probe (T), interface (I), Viton seals (V)
KA - Lateral Compliance Device
The KA series of lateral alignment devices compensates for part misalignment (X/Y) during assembly where part positioning may be less than precise. The locking cylinder centers the tool plate and secures the unit during rapid movement.
- Compensates for misalignment between parts at assembly
- Stiff in all directions when locked, fully compliant when unit is unlocked
- X-Y roller bearing motion with pneumatic centering
RCW - Lateral and Angular Alignment Device
The RCW compliance wrists are ideal for insertion applications where part positioning may be less than precise. Compliance in torsion, bending and lateral directions allow this device to compensate for inaccuracies thus protecting the part and machine.
- Compensates for inaccuracy or misalignment between parts and machine in both lateral and angular axis
- Increases assembly speed while reducing wear and parts jamming
- Improves quality and reduces cost by avoiding damage of parts
|
|
|
|
|
|
CH - Horizontal Compliance Device
Range horizontal compliance including five models. The CH series allow to compensate horizontal misalignment.
Stroke range from 6 to 24mm
Options : spring safety (RA ou RL), probe (T), interface (I), Viton seals (V)
KA - Lateral Compliance Device
The KA series of lateral alignment devices compensates for part misalignment (X/Y) during assembly where part positioning may be less than precise. The locking cylinder centers the tool plate and secures the unit during rapid movement.
Compensates for misalignment between parts at assembly
Stiff in all directions when locked, fully compliant when unit is unlocked
X-Y roller bearing motion with pneumatic centering
RCW - Lateral and Angular Alignment Device
The RCW compliance wrists are ideal for insertion applications where part positioning may be less than precise. Compliance in torsion, bending and lateral directions allow this device to compensate for inaccuracies thus protecting the part and machine.
Compensates for inaccuracy or misalignment between parts and machine in both lateral and angular axis
Increases assembly speed while reducing wear and parts jamming
Improves quality and reduces cost by avoiding damage of parts
|
|
RUA - 2-Angular Parallel Gripper
Range of two jaws angular grippers including 5 models. Total stroke varying from 31.8� to 38.2� and torque varying from 13 to 456Nm. Ideal gripper for automotive applications. Many options available
1. The RUA series are shielded to avoid debrits from entering. The boot option (E) protect gripper from small particules (emeri)
2. Sensing options : Magneto-Resistive sensors available, probe (T) and integrated sensor (KH, KS)
3. Options : spring safety (RE ou RI), tandem (M) to double the force, Viton (V) for high temperatures, hydraulic (H)
4. Suit for industrial and heavy duty applications especially in machining and grinding environment
|
|
DPG - DIRECTCONNECT Gib Parallel Gripper
DIRECTCONNECT modular 2 jaw parallel gripper is highly configurable with multiple mounting surfaces, air port locations, spring assist/spring return, single jaw motion and more. Shielded design repels chips and particulate.
* Features DIRECTCONNECT Mounting
* Highly configurable gripper
* Excellent accuracy and repeatability
|
|
|
|
|
|
15BE - Grippers
English version, 15 Series grippers with a Flange Base mount .
1. Adjustable gripper opening (patent pending)
2. Remains closed if pressure is lost
3. Service lubrication not required
4. Gripper heads are interchangeable
15BM - Grippers
Metric version, 15 Series gripper with a Base mount.
1. Adjustable gripper opening (patent pending)
2. Remains closed if pressure is lost
3. Service lubrication not required
4. Gripper heads are interchangeable
15CE - Grippers
Englision version, 15 Series gripper with a Cylinder mount.
1. Adjustable gripper opening (patent pending)
2. Remains closed if pressure is lost
3. Service lubrication not required
4. Gripper heads are interchangeable
15CM - Grippers
Metric version, 15 Series Gripper with a Cylinder mount.
1. Adjustable gripper opening (patent pending)
2. Remains closed if pressure is lost
3. Service lubrication not required
4. Gripper heads are interchangeable
20BE - Grippers
English version, 20 Series grippers with a Flange Base mount .
1. Adjustable gripper opening (patent pending)
2. Remains closed if pressure is lost
3. Service lubrication not required
4. Gripper heads are interchangeable
|
|
Range of two jaws angular grippers including 5 models. Total stroke varying from 31.8� to 38.2� and torque varying from 13 to 456Nm. Ideal gripper for automotive applications. Many options available
The RUA series are shielded to avoid debrits from entering. The boot option (E) protect gripper from small particules (emeri)
Sensing options : Magneto-Resistive sensors available, probe (T) and integrated sensor (KH, KS)
Options : spring safety (RE ou RI), tandem (M) to double the force, Viton (V) for high temperatures, hydraulic (H)
Suit for industrial and heavy duty applications especially in machining and grinding environment
|
|
|
|
|
|
2 Jaw Angular Grippers
DCT - 180° Angular Gripper
Several accessories (adjustable stop, magneto resistive or inductive sensors) allow this gripper to be used in a number of applications.
- The full jaw opening (180°) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator.
- DIRECTCONNECT™ mounting on back of body (sizes 12-25). Standard mounting on top.
- This gripper is designed for use in confined spaces.
- Shielded design repels chips and other particulate from internal drive mechanism.
2 Jaw Parallel Grippers
DPDL - DirectConnect Double Wedge Long Stroke Parallel Gripper
DIRECTCONNECT long stroke 2 jaw parallel gripper features multiple jaw styles, mounting and air port locations and more. Each gripper is offered in 3 different strokes. Corrosion resistant hardware or clean room options are available.
3 Jaw Parallel Grippers
DTH - DIRECTCONNECT Shielded 3-Jaw Centering Parallel Gr
The DTH Series 3-Jaw Parallel Gripper, featuring our DIRECTCONNECT mounting pattern, is ideal for machine load/unload applications. It's shielded design repels chips and other particulate. Each gripper is avaliable in two stroke lengths.
Sheet Metal Grippers
15BE - Grippers
English version, 15 Series grippers with a Flange Base mount .
- Adjustable gripper opening (patent pending)
- Remains closed if pressure is lost
- Service lubrication not required
- Gripper heads are interchangeable
|
|
DIRECTCONNECT long stroke 2 jaw parallel gripper features multiple jaw styles, mounting and air port locations and more. Each gripper is offered in 3 different strokes. Corrosion resistant hardware or clean room options are available.
Features DIRECTCONNECT Mounting
Highly configurable gripper
Multiple, Extended Strokes
Optional Sealed Jaw Boot
|
|
2 Jaw Angular Grippers
2 Jaw Parallel Grippers
3 Jaw Parallel Grippers
Plastic Handling
Sheet Metal Grippers
|
|
7011-5 - Hydraulic Power Clamp
The power clamps (double action) are used where a high clamping force is needed combined with small clamp dimensions. The cylinder body can be turned 90� in relation to the clamp.
1. max. clamping force 1250 daN (2810 ib)
2. max. operating pressure 250 bar (3625 psi)
00863DE/100986DE - Hydraulic Edge Clamp
StrongHold edge clamps perform three functions: locating the workpiece, clamping horizontally against secondary locators, and clamping vertically against the primary locating surface.
1. Conventional or manifold mount versions
2. 15 degree clamping angle
3. Single acting
4. 2000 lbs. clamping force
|
|
8021 - Pneumatic Hold Down Clamp - Enclosed
Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining.
1. 390 lb. Capacity
2. Double-acting pneumatic system required to operate
3. Available with magnetic ring for position sensing as an option. Switches are also available
4. Can be equipped with Viton seals for high temperature applications
035 - SELECT Pneumatic Swing/Pull Clamp
StrongHold SELECT pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. They are a rugged and simple design suitable for harsher applications.
1. Double acting in threaded body or lower flange mount styles
2. Range of sizes for maximum clamping forces from 50 to 430 lbs.
3. Swing motions in right, left or straight guided pull
4. Avaiable in 0, 45, 60 or 90 degrees of swing
|
|
035 - SELECT Pneumatic Swing/Pull Clamp
StrongHold SELECT pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. They are a rugged and simple design suitable for harsher applications.
1. Double acting in threaded body or lower flange mount styles
2. Range of sizes for maximum clamping forces from 50 to 430 lbs.
3. Swing motions in right, left or straight guided pull
4. Avaiable in 0, 45, 60 or 90 degrees of swing
|
|
225 - Horizontal Hold-Down Toggle Locking Clamp
Minimum overhead clearance is required for this low profile clamp
1. 500 lb. capacity
2. Clamp supplied with neoprene spindle
3. Stainless steel and straight base models available
4. DE-STA-CO® Toggle Lock Plus versions available
235 - Horizontal Hold-Down Toggle Locking Clamp
Minimum overhead clearance is required for this low profile clamp
1. 750 lb. capacity
2. Clamp supplied with neoprene spindle
3. Stainless steel and straight base models available
4. DE-STA-CO® Toggle Lock Plus versions available
|
|
|
|
|
|
52H - Manual Automotive Clamps
Application: Clamping, holding, gripping and accurately positioning of metal sheets and other parts in jigs and handling systems.
- inductive sensing module with LED display
- toggle action mechanism
- centring pin diameters between 20 mm and 45 mm
- manual actuation and single-sided clamping hook
Carver Bar Clamp - Bar Style Carver Clamps
These rugged clamps, made from high-tensile, heat-treated steel, are designed for all types of applications requiring large holding capacities. The clamps are highly versatile, for example, jaws can be reversed. Ideal for welding applications.
- 1250 - 6000 lb. Capacity
- Two moveable jaws can be reversed for a spreading motion
- Multiple jaws can be used on the bar for multi-positioning clamping
- Bar lengths of up to 108" long
2013 - Vertical Hold-Down Toggle Locking Clamp
New generation toggle clamp with over 2 times the capacity of our legacy models
- Longer handle with greater hand clearance
- Longer clamp arm
- Spindle contacts workpiece vertically
- Bolts up to legacy model 210
8021 - Pneumatic Hold Down Clamp - Enclosed
Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining.
- 390 lb. Capacity
- Double-acting pneumatic system required to operate
- Available with magnetic ring for position sensing as an option. Switches are also available
- Can be equipped with Viton seals for high temperature applications
6001 - Straight Line Action Clamp
Heavier duty version of model 601
- 150 lb. Capacity
- Base can be side mounted
- Available in stainless steel
- 50% more capacity than model 601
|
|
|
|
|
|
030 - SELECT Hydraulic Swing/Pull Clamp
SELECT hydraulic threaded body swing clamps are high quality and cost effective alternatives to competetive brands.
- Range of sizes
- available in sigle or double acting versions
- field adjustable swing direction
- MRO interchange
035-1 - SELECT Pneumatic Swing/Pull Clamps
SELECT line of pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. The fast acting clamps can generate up to 50 pounds of clamping force from shop air.
- Swing motion available in 0, 45, 60, and 90 degrees
- Four styles of arms
- Double-locked arm design is bolted to piston shaft and around shaft diameter for extra rigidity
- Double-acting design
727D - Hydraulic Swivel Clamping Cylinder
Hydraulic swivel clamping cylinders are particularly designed for applications which require high clamping forces and easy loading of workpieces in confined spaces.
- swivel left
- max. clamping force 475, 850, 1250 daN
- max. operation pressure 250 bar (3625 psi)
|
|
QC / TP - Tool Changer
These medium and light duty tool changers offer an excellent weight to payload ratio. They were designed with an exceptional repeatability, high rigidity and load capacity to make them ideal for any robotic application
1. The QC series can be delivered with an integrated I/O block and can accomodate one optional module
2. Integrated air connection save space and money
3. The design allows the two halves to couple at up to a 0.1" [2.5mm] gap and to be safe in case of air failure
|
|
|
|
|
|
QC / TP - Tool Changer
These medium and light duty tool changers offer an excellent weight to payload ratio. They were designed with an exceptional repeatability, high rigidity and load capacity to make them ideal for any robotic application
- The QC series can be delivered with an integrated I/O block and can accomodate one optional module
- Integrated air connection save space and money
- The design allows the two halves to couple at up to a 0.1" [2.5mm] gap and to be safe in case of air failure
RHC - Robotic Tool Changer
Facilitates the changing of end effector tooling on robots to accommodate the assembly of many different parts on the same assembly machine. Multiple pneumatic connections and optional electrical contacts make the RHC series an excellent choice.
- Conical seat provides easy connection with tool adapter and increased payloads
- Made from 7057-T6 aircraft quality aluminum, hardcoat to RC60. Teflon impregnated for maximum wear resistance
- Failsafe locking mechanism maintains connection even with the loss of air
- Unique latching mechanism pulls the tool plate into the body, preloading the tool plate for excellent rigidity
|
|
|
|
|
|
QC / TP - Tool Changer
These medium and light duty tool changers offer an excellent weight to payload ratio. They were designed with an exceptional repeatability, high rigidity and load capacity to make them ideal for any robotic application
The QC series can be delivered with an integrated I/O block and can accomodate one optional module
Integrated air connection save space and money
The design allows the two halves to couple at up to a 0.1" [2.5mm] gap and to be safe in case of air failure
RQC / RTP - Tool Changer
Our modular robot tool changers lead the industry with a full product line covering up to 1200lbs [545Kg]. A wide variety of utilities are available to quick disconnect, I/O, air, water, weld power, servo power, vacuum lines.
The RQC series offer a high level of flexibility accomodating up to 4 optional modules to be picked up among a wide choice
The 6 rollers patented mechanism provides a low stress, highly rigid locking capability
The design allows the two halves to couple at up to a 0.1" [2.5mm] gap and to be safe in case of air failure
Both halves uses an Iso pattern that allow a direct mounting on robot arm
|
|
ER Spring Collet Chuck System
- Easy to mounting with self-tighten Keyless Chuck for use on CNC machining centers in Drilling, Boring and Milling operations.
- According to DIN, Morse, ANSI standard to produce.
- High precision ground internal and external for accurate concentricity.
Precision Tool Holder System
- Easy to mounting with self-tighten Keyless Chuck for use on CNC machining centers in Drilling, Boring and Milling operations.
- According to DIN, Morse, ANSI standard to produce.
- High precision ground internal and external for accurate concentricity.
|
|
RR-Heavy Duty - Flange Output Rotary Actuator
This heavy-duty rotary actuator is ideal for payloads up to 200 lbs [91Kg] in weight. They are available in standard 45, 90, 135 or 180 degrees of rotation. Optional shocks/stops, mid-stop and rotary manifold available.
1. Low profile and bearing supported turn table provides an extremely compact package for tight space applications
2. Payload can be connected directly to the turn table. Eliminates the need for a bearing block
3. Zero backlash, preloaded ball bearings, and slip fit dowel pins make this a very precise and repeatable rotary actuator
4. Air manifold option eliminates twisted airlines
|
|
|
|
|
|
DLB-B/L - DirectConnect Internally Powered Base Slide
These highly configurable internally powered linear base slides reduce the mounting footprint over externally powered slides by up to 50%. They are available in multiple strokes & sizes. DIRECTCONNECT mounting makes assembling these units together a snap.
- Bulit-in repairable cylinder
- Compact for extremely small spaces (-B)
- Longer strokes in Compact Space Saving Package (-L)
- Features DIRECTCONNECT mounting
RFE - Feed Escapement
The RFE series of feed escapements offer failsafe locking fingers, sealed design to prevent internal component wear, and built-in sensor mounting slots. They are the most effective mechanism for separating components fed from a track or conveyor.
- Finger locking mechanism ensures that only one finger can be retracted at one time for proper part feeding
- Square shaft prevents shaft from rotating
- Unit can be mounted using top, bottom, or face surface
DLM - Mini Ball Rail Slides
- Up to 8 position sensing available.
- Recirculating Double Bearing Option
- Adjustable Precision Stops
- High Temperature Viton Seal Option Available.
DMM - DirectConnect Slide Mounting Modules
These pre-engineered mounting modules are designed to provide a simple and sturdy solution for mounting DIRECTCONNECT Base Slides and Thrusters. Select from 10 different design styles in 3 sizes. Simply specify style, beam size, and basic dimensions.
- Simple and sturdy solution for mounting DirectConnect base slides and thrusters
- Pre-engineered designs save you time and money
- Individual components allow you to design your own modules
- Customize with add-on kits and accessories
|
|
|
|
|
|
DRF - Flange Output Rotary Actuator
These new DIRECTCONNECT, flange mount rotary actuators, allow the payload inertia to stop directly through an independent hard stop mounted in the turntable, rather than through the drive mechanism.
- Infinitely adjustable within rotation range
- Dual bearing flange support
- Magneto-resistive sensing
- Adjustable hard stops
RR-Light Duty - Flange Output Rotary Actuator
This small, compact and lightweight rotary actuator is ideal for payloads up to 3 lbs [1.3Kg]. They are available in standard 45, 90, 135 or 180 degrees of rotation. Optional sealed flange or sealed flange with corrosion resistant hardware available.
- Low profile and bearing supported turn table provides an extremely compact package for tight space applications
- Payload can be connected directly to the turn table. Eliminates the need for a bearing block
- Zero backlash, preloaded ball bearings, and slip fit dowel pins make this a very precise and repeatable rotary actuator
- Air manifold option eliminates twisted airlines
RR-Heavy Duty - Flange Output Rotary Actuator
This heavy-duty rotary actuator is ideal for payloads up to 200 lbs [91Kg] in weight. They are available in standard 45, 90, 135 or 180 degrees of rotation. Optional shocks/stops, mid-stop and rotary manifold available.
- Low profile and bearing supported turn table provides an extremely compact package for tight space applications
- Payload can be connected directly to the turn table. Eliminates the need for a bearing block
- Zero backlash, preloaded ball bearings, and slip fit dowel pins make this a very precise and repeatable rotary actuator
- Air manifold option eliminates twisted airlines
|
|
|
|
|
|
DRF - Flange Output Rotary Actuator
These new DIRECTCONNECT, flange mount rotary actuators, allow the payload inertia to stop directly through an independent hard stop mounted in the turntable, rather than through the drive mechanism.
Infinitely adjustable within rotation range
Dual bearing flange support
Magneto-resistive sensing
Adjustable hard stops
DRG - Shaft Output Rotary Actuator Series
These new DIRECTCONNECT, shaft mount rotary actuators, are an excellent choice for diverter gates, escapements and ejection stations where low precision end stop positioning and backlash are acceptable.
Infinitely adjustable within rotation range
Multiple mounting locations
Highly configurable. Multiple options
Features DIRECTCONNECT mounting
RR-Medium Duty - Flange Output Rotary Actuator
This medium-duty rotary actuator is ideal for payloads up to 15 lbs [6.8Kg] in weight. They are available in standard 45, 90, 135 or 180 degrees of rotation. Optional mid-stop and rotary manifold available.
Low profile and bearing supported turn table provides an extremely compact package for tight space applications
Payload can be connected directly to the turn table. Eliminates the need for a bearing block
Zero backlash, preloaded ball bearings, and slip fit dowel pins make this a very precise and repeatable rotary actuator
Air manifold option eliminates twiisted airlines
|
|
|
|
see the results for the following category : 
