|
|
|
Modern cutting techniques produce a wide range of harmful by-products (water, dust, chips and shavings...). ASP covers are made of industrial fabrics specially designed to resist such conditions. They are tailor-made specifically to fit into this work environment perfectly.
|
|
|
ASP’S WASHABLE COVERS are made of industrial fabrics coated on one side only. This ensures that they can be successfully washed (in water or solvent) and thus used for a number of years. Satisfying your detailed requirements in full, our tailor-made design ensures maximum efficiency without restricting the robot’s movements in any way. The covers can be changed (taken off and refitted) quickly, with no tooling required. This enables you to maintain high productivity. The covers we supply all meet the acceptation criteria for paint-shops in full (no silicon-type non-stick agents…).
|
|
ASP'S FOUNDRY COVERS are made of special (aramid-based) coated industrial fabrics. These coatings give the complex used the required mechanical and heat-resistant properties to operate satisfactorily in the conditions generated in foundry-work (high fire rating, tear resistance...) The covers are made-to-measure and used covers repaired in our workshops to make sure your robots always have optimum protection.
|
|
MECHANICAL HANDLING
--------------------------------------------------------------------------------
The environments in which mechanical handling robots work very considerably. Thanks to over 18 years experience in all sectors of industry, ASP offers the perfect protection for your robots that will take your specific conditions fully into account: environment, operating times, on-site washing...
|
|
ASP'S WASHABLE COVERS are made of industrial fabrics coated on one side only. This ensures that they can be successfully washed (in water or solvent) and thus used for a number of years. Satisfying your detailed requirements in full, our tailor-made design ensures maximum efficiency without restricting the robot's movements in any way. The covers can be changed (taken off and refitted) quickly, with no tooling required. This enables you to maintain high productivity. The covers we supply all meet the acceptation criteria for paint-shops in full (no silicon-type non-stick agents...).
|
|
ASP "High Tech"covers are made using technical fabrics with specific coatings. The "tailor-made" design provides maximum efficiency without limiting robot movements. The time required to replace a cover remains compatible with your productivity. The covers in our material TNCA or NEOLIS offer you the following advantages :
Excellent level of resistance in food grade processes (and especially daily washing).
Washable cover on the robot.
Ventilated or pressurized cover.
Our material TNCA : according to the FDA 21 CFR Ch. 1 list (4.1.1996 Edition) § 177.2600.
Our material NEOLIS : according to the FDA 21 CFR Ch. 1 list § 177.1600.
|
|
The ASP covers in our material Neolis/TNCA are suitable for contact with foods (FDA)
ASP "High Tech"covers are made using technical fabrics with specific coatings. The "tailor-made" design provides maximum efficiency without limiting robot movements. The time required to replace a cover remains compatible with your productivity. The covers in our material TNCA or NEOLIS offer you the following advantages :
Excellent level of resistance in food grade processes (and especially daily washing).
Washable cover on the robot.
Ventilated or pressurized cover.
Our material TNCA : according to the FDA 21 CFR Ch. 1 list (4.1.1996 Edition) § 177.2600.
Our material NEOLIS : according to the FDA 21 CFR Ch. 1 list § 177.1600.
|
|
|
The environments in which mechanical handling robots work very considerably. Thanks to over 18 years experience in all sectors of industry, ASP offers the perfect protection for your robots that will take your specific conditions fully into account: environment, operating times, on-site washing…
|
|
|
The very different requirements created by the various welding techniques mean that specific products have to be specially developed. The industrial fabrics we use have specific coatings that leave the cover flexible but resist spatter and welding projections. Their para-aramid base has excellent mechanical resistance. Whatever the technique you use: arc welding, spot welding, laser welding... ASP has the perfect cover specially adapted to your exact situation.
|
|
| ... products without technical information |
| |
Safe-Knit® Guard
High performance protective sleeves
Using state-of-the-art high performance fibres and anatomic design, Ansell Safe-Knit® Guard protective sleeves provide far more than safety alone. In addition to superior cut resistance, they have comfort that significantly supports productivity. When you need optimal performance from your workers, Safe-Knit® Guard sleeves are the ideal solution.
|
|
Protective Sleeves
Low-Cost Protection for Worker’s Arms
Ansell offers the industry’s most complete line of protective sleeve materials and styles. From vinyl, urethane, and hycar (nitrile blend), to neoprene, denim, and cane mesh, there is an Ansell sleeve for practically every application. Workers are protected against chemicals, snags, punctures, and abrasions. Cane mesh styles offer a high level of cut resistance. Vinyl styles are completely heat-sealed with no exposed elastic.
Applications
Food processing • Meat packing• Assembly • Electronics • General manufacturing.
|
|
Salisbury's Rubber Insulating Sleeves extend protective coverage from the rubber glove's cuff to the shoulder.
Meet ASTM D1051 and IEC/EN 60984
Offered in two different manufacturing processes:
- Dipped
- Salisbury Exclusive -- Molded
Dipped Sleeves are available in three styles:
- Extra-Curved
- Curved
- Straight
- Offered in single or two color combinations
Molded sleeves are available in either Type I or Type II Salcor synthetic rubber
- Available in three solid colors:
- Safety Orange
- Yellow
- Black
Available in regular, large and extra large ASTM sizes.
|
|
TYVEK® boot covers, Model POBO
Model Description:
TYVEK® boot covers, Model POBO
* Elastic on top
* Additional ties
* Length: 42 cm
* Height: 48 cm
* Sizes: single size
|
|
TYCHEM® C and TYCHEM® F Slip retardant overboot, model POBA
Knee length boot cover with slip retardant sole
Seams: Stitched and overtaped, offering equal barrier to fabric.
Sole not liquid-tight, only stitched.
Colour: Yellow, grey
Size: Single size
|
|
Model Description:
TYVEK® shoe covers with slip retardant sole, Model POSA
* Elasticated ankles
* Sizes: 36-42, 42-46
|
|
Model Description:
TYVEK® shoe covers, Model POSo
* elasticated ankles
* Length: 40 cm
* Sizes: single size
|
|
*With its overtaped seams this suit is ideal for toxic dry
particulate environment or where liquid penetration
through seams should be avoided.
*Only type 4B nonwoven suit, take full advantage of Tyvek® unique inherent barrier protection as seams are tight
*Best solution for mask wearers, best fit with respirators.
*Protection against radioactive contamination according to EN 1073-2.
*Electrostatic protection according to EN 1149-1.
*CAT. III
*Type 4B, 5, 6
*White
*S-XXXL
|
|
|
|
|
|
The flexible cuffs QuickFlex are used without the processes for powders or granulated. They allow d%u2019isoler mechanically equipment the ones compared to the others. Ex: to isolate a vibrating sifter compared to his screw from proportioning.
QuickFlex consist of:
- 2 rigid pipes to weld onto the 2 parts of the process having to receive the cuff. These pipes are equipped with patented sections, adapted to the QuickFlex cuff.
- 1 flexible pipe whose two ends are equipped with bands d%u2019acier with spring moulded in l%u2019élastomère of the cuff. The installation of the cuff is done in a very simple way, by deforming the band d%u2019acier with spring in order to l%u2019insérer in the rigid pipes. The original shape of the section ensures then a perfect sealing of the cuff.
The assembly is done without tool in less than 20 seconds. One thus eliminates the risks to be wounded with screwdrivers during tightening from the traditional collars. Moreover the sleeve is adapted perfectly to the pipe.
No zone of retention n%u2019exist enters the flexible cuff and the pipe.
The system is tight with the emissions of dust. It resists an explosion of dust.
From its design, the phenomena of shearing of the cuff by the collar are eliminated.
Various d%u2019élastomères qualities are available:
Let us quote in example a food translucent polyurethane execution allowing to control l%u2019interior of the process visually.
For l%u2019industrie mineral, flexible cuffs in Kevlar are available.
These cuffs are available in a diameter ranging between 100 and 650 Misters.
|
|
The 2" coupling size probably covers the most diverse selection of applications in the Todo-Matic family. Available in a range of material and connection configurations, Todo-Matic 2" is designed for rapid and safe transfers. Offshore chemical dosing, pharmaceutical feedstock and aggressive chemical vapor transfer are just some of the challenging applications Todo-Matic couplings see on a daily basis.
|
|
Ultra Thin-wall Flexible Metal Roll is extremely thin at only 0.03 mm. It is soft and flexible, yet rigid with high tensile strength of stainless steel. This roll shows the best performance when used in a fuser unit of a printer or copier, realizing wall contact and shorter standing-up time.
Features
Ć Thickness: 30 micron minimum
Ć Seamless
Ć Create wall contact rather than line contact, resulting in effective nipping
Ć Excellent thermal conductivity resulting in shorter stand-up time and conservation of electricity
Ć High tensile strength of stainless steel
Ć Smooth surface
Ć High precision in thickness, roundness, outer and inner diameter
Ć Light
Ć Plating, plastic coating, and rubber coating on surface
Ć Choice of magnetism and nonmagnetism
Application
Ć Fusing unit in a printer or copier
Ć Other parts in a printer or copier
Ć Motor cover, Rotor cover, Stator cover
Ć Plastic Sheet forming, Film forming
Ć Lamination
Ć Seamless Bellows
|
|
Style 630
Material Specifications:
Body: 18-8 Type 304 Stainless Steel to ASTM A-240.
Bolts: 18-8 Type 304 Stainless Steel.
Nuts and Washers: 18-8 Stainless Steel, coated.
Flange: 18-8 Stainless Steel, ANSI 150 Lb.
Drilling. Recess per MSS-SP60. Also available in Carbon Steel per AWWA C-207, Class D.
Gasket: Buna N (Nitrile) specially compounded for water applications. Proven in water service
for over 50 years. Wedge-type gasket design for higher sealing pressures.
Finish: Fully Passivated to ASTM A-380.
Usage: For cast and ductile iron, PVC (DR 18 or thicker), A-C and steel pipe installations.
Pressure Rating: 150 PSI or higher depending on pipe material and branch size.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
