|
|
| The very different requirements created by the various welding techniques mean that specific products have to be specially developed. The industrial fabrics we use have specific coatings that leave the cover flexible but resist spatter and welding projections. Their para-aramid base has excellent mechanical resistance. Whatever the technique you use: arc welding, spot welding, laser welding... ASP has the perfect cover specially adapted to your exact situation. |
|
Panasonic G2 Robot Controller
64-bit RISC processors based controller with exclusive Windowsฎ CE-based teach pendant provides a user-friendly interface which enhances productivity. Digital Interface with Panasonic digital power source makes it possible to adjust all parameters through the teaching pendant. |
|
ADVANTAGES:
Robot checking of Electrode Force
No need to stop robot cells for force checking
Very fast payback
Alerts operators to immediate faults & variations
Can eliminate scrap due to weld deterioration
Reduces equipment damage and wear
Keeps force within preset limits
Gives early warning of equipment deterioration
Continuous robot operation via go/no go signals
DESCRIPTION - KR1000:
Stand alone analogue output force sensor. Supplied for direct plug and play replacement to commonly existing units.
The target pads remain spatially the same. Robot reprogramming for test position is not required.
The monitor is preset to Zero on no load but can be simply adjusted by the user if required.
The innovative design of the KR1000 force head makes it far less susceptible to errors induced by electrodes not being perpendicular to the target pads.
Exacting construction standards guarantee this instrument is of greater accuracy than other monitors of this kind.
Multiple testing during construction further assist in achieving the superiority that we have set out to achieve.
When coupled to its onboard electronics package the sensor is preset for zero load & calibrated
to a known (NPL) standard.
The KR1000 is robust, durable, reliable, and accurate. KR1000s have been installed on Car Manufacturing lines since 2005 and have been in constant use without failures. |
|
GMAW MIG/MAG is a rewarding welding method to automate. At ESAB we have many years experience of this and over the years we have been the forerunner within robot welding as well as other applications. Our program for automated GMAW MIG/MAG consists of everything from the simple welding tractor that holds the welding pistol for the welder, during long, tiring welding work, up to fully automatic welding applications.
|
|
PULSE CURRENT
48 WELDING PROGRAMS RECORDED
SEPARETED WIRE FEEDER UNIT -
2 MACHINES : WITH COOLER UNIT BUILT IN OR NOT
x pulse current
x 2 modes of parameters' adjustments : manual or synergic
x 48 synergic programs recorded with optimized parameters adjustments following welding application
x simple and easy to use : a cover on front face allows the operator to access only to the essentials parameters or recorded programs.
x under the cover of the front face, the operator can reach to the manual adjustment of hidden parameters : arc force, over current when ignition, pulse parameters, pre gas, post gas, down slope, record a program
STICK WELDING
x hot start
x pulse current
x welding sequencies
MIG/MAG WELDING
x all wires (steels, aluminium, flux cored ...) of diameter from 0.8 to 1.6mm
x 2 stroke / 4 stroke
x manual or synergic adjustment
x pulse current
x MIG spot welding
x welding sequencies |
|
The YD-350GB2 CO2/MAG inverter welding power source and the YW-35DD1YAD wire feeder with intelligent control box have been developed on Panasonic digital technology. It is 100% digital controlled and offers high quality welding and easy access to the IT world.
100% full digital control
Exact output parameters
Excellent welding results especially between 200A to 250A
Sharp FTT - quick and smooth arc start
Duty cycle: 350A / 60%
Dimensions: 510 x 380 x 494 mm (L x W x H), weight: 38 kg
Digital interface with Panasonic robots
400 V AC, 3 phases, 50 Hz
Wire feeder with intelligent control box YD-35DE1YAD
Parameter setting through the intelligent control box
Digital display for both programmed parameter and actual welding parameter
Easy and logical parameter setting by LCD and jog dial
Motor equipped with encoder provides digital feed back control of wire feeding
Quality control
memory for 32 program
Monitoring function for welding current, welding voltage, wire feeding speed etc.
Easy transfer of programs to other 350 GB2 power sources
Customer benefits
Less spatter, constant, high quality welding lowers production costs
Reliable quality for low maintenance and service cost
Easy parameter setting by jog dial
Mobile compact size |
|
The YC-300BZ3 DC inverter TIG welding power source has been developed on Panasonic digital technology. It is 100% digital controlled and offers high quality welding.
Technical Data:
100% full digital control high performance welding
Exact output parameters
Sharp and stable arc start as low as 4 amp.
Welding Method:
1. DC TIG, DC pulse TIG for mild and stainless steel as well as titanium 0.3 6 mm, copper and brass 0.5 3 mm
2. DC TIG arc spot for mild and stainless steel with 2 x 2 mm thickness
3. DC stick for diameter 2 6 mm
Duty cycle: 300A / 40%
Weight: 36 kg
Digital interface with Panasonic robots
Arc drive function for stick welding
Dimensions: 510 x 380 x 410 mm (L x W x H)
400 V AC, 3 phases, 50 / 60 Hz
Digital display, LCD, jog dial
Digital display for both programmed parameter and actual welding parameter
Easy and logical parameter setting by LCD and jog dial
Quality control
99 memory programs
Digital connection with the PC / network for production
management and quality control
Customer Benefits:
Sharp and stable arc start
Reliable quality for low maintenance and service cost
Easy parameter setting by jog dial |
|
The YD-350GE2 MIG/MAG inverter pulse welding power source and the wire feeder YW-35DEB1YAD with intelligent remote control unit is based upon the latest generation of Panasonic digital technology. It has 100% digital controlled ensuring high quality welding and easy access to the IT world via PC based interface. It supports following welding methods: COฒ/MAG, Pulse-MAG, MIG and Pulse-MIG.
Welding Power Source YD-350GE2YHD 100% full digital control
Exact output parameters
Suitable for aluminium, mild steel, stainless steel welding
Quick and instantaneous arc starts
High speed welding with less spatter with 32 bit technology
Quick response to changes in arc length
Duty cycle: 350A / 60%
Sharp FTT - quick and smooth arc start
Dimensions: 510 x 380 x 570 mm (L x W x H), weight: 66 kg
Digital interface with Panasonic robots
400 V AC, 3 phases, 50 Hz
Wire feeder with intelligent control box
Parameter setting through the intelligent control box
Digital display for both programmed parameter and actual welding parameter
Easy and logical parameter setting by LCD and jog dial
Motor equipped with encoder provides digital feed back control of wire feeding
4-drive wire feeder for aluminium, 2-drive wire feeder for mild steel and stainless steel available.
Quality control
Memory for 32 programs
Monitoring function for welding current, welding voltage, wire consumption etc.
Customer Benefits
High speed, high quality, less spatter welding
Easy parameter setting by jog dial
Exact output parameters for easy parameter adjustment |
|
Panasonic presents the full digital AC/DC-TIG power source
YC-300BP2 which was invented for AC-, DC- and Mix- TIG welding. The BP2 can be used until an AC-frequency up to 400Hz.
The BP2 is easy to operate even if several assigned functions are selected and it has a well arranged control panel. Up to 50 different welding conditions can be stored and operated. |
|
EFD presents the new ProcessMate 6100 Hot Air Reflow System. This digital bench top reflow system uses an active feedback loop to accurately control air temperature to ฑ 5บC. Temperature ranges from 100บC to 480บC adjustable in 1บC increments. The diaphragm pump provides an adjustable, repeatable, constant air flow.
When used with EFD SolderPlusฎ dispensing solder paste, the ProcessMate 6100 reduces operator variability, rework and scrap while increasing productivity and production yields without special training requirements typical of wire-and-iron soldering. The precise temperature and air flow control allows for a larger process window for reflow without overheating components. Operators are able to visually observe solder being reflowed to prevent common soldering defects. |
|
Horizontal, vertical, diagonal. This tried and tested semi-automatic welding machine can be used universally. The increased welding speed compared with hand welding gives rise to higher productivity.
Overlap welding of PVC-P, ECB, EPDM, CSPE and TPO roofing membranes
Faster and more efficient than hand welding
Small and compact
Steplessly adjustable speed for high welding seam quality
Can be used in the most confined spaces
Different welding seam widths
|
|
System of Rework to Forced convection bread-board HCT-900-21
An unsurpassable instrument for the workbenches of the industry electronic, that it concurs multiple operations of rework on slabs SMT, for means of a powerful one, warm airblast.
The regulations of the temperature and the air capacity allow to optimize the job according to the single requirements. The remelting of the alloy happens in way sure express and for being able to remove the members from the card with extreme facility. Using cream of pond it will be possible to risaldare new members in place of those removed. A series of interchanging nozzles facilitates the operations of rework on chip, Plcc and Qfp. The system is very lend also to machinings with termorestringenti materials.
MAIN CHARACTERISTICS:
Feeding: 220Vac
Power heater: 700W
Distributed effective power: 400W
Built-in pump: diaphragm
Range temperatures: from 100 to 500ฐC
Air flow: from 6 to 10 L/m
Dimensions: 210x170x140mm
Weight: 4,7Kg
|
|
The YD-500AF2 is a MAG / Pulse MAG power source for automated welding with Panasonic welding robots.
Input Voltage / Frequency: 400V / 50 Hz
Input: 28 KVA
Output current, adjustable range: 40 500 A
Output Voltage, adjustable range: 12 45 V
Duty cycle: 500 A / 100%
Weight: 117 kg
Dimensions (L x W x H): 585 x 440 x 945 mm
The YD-500AF2 welding power source can be used for welding of mild and stainless steel.
Following welding methods are possible: Standard/ Pulse, Hybrid, Hard + Soft Pulse |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
