|
|
LIGHTSTATION
New from Cyalume! Our LightStation™ line provides emergency lighting with 4, 6, 10, or 20 10" SnapLights® that last for 4 hours. When the power goes out the photoluminescent label makes the LightStation™ instantly identifiable in the dark. After opening, users take a SnapLight® to light the area and their way.
The new LightStation™ will offer you in a single product:
Automatic illumination of area and exits
Personal evacuation light for each person
High visibility for each evacuee to arriving rescue teams
The Models 4, 6, and 10 are made of fire and blast resistant steel. When the front cover is opened all SnapLights® activate and can be easily removed for use.
All LightStations™ can be mounted to the wall near exits, fire extinguishers, on trains and buses, or in rooms and hallways that have little or no emergency lighting. Each LightStation™ is sealed with pins that provide a visual alert of use or tampering.
|
|
3" LIGHTSTHAPE™ -CYALUME
Cyalume's 3" LightShapes use ChemLight™ technology and come with adhesive on the back - just press, snap and shake. Then stick the Lightshape anywhere and on any material for 180° of illumination that lasts for hours.
3" Lightshape can mark a hazard or the way out
Work hands free
Make illuminated signs with a permanent marker.
NSN approved.
Personnel identification
Medical triage marker
LightShapes are available in red, yellow, orange, blue or green.
|
|
SNAPLIGHT - CYALUME
The ideal emergency light on any occasion. Available in many colours and durations as indicated below. Numerous uses and applications in total darkness.
Cyalume's industrial grade 6" SnapLights provide 360° of illumination. They are foil wrapped for light/moisture protection, maintenance free, non-toxic, non-flammable, and waterproof.
Assets
360° illumination
Do no generate sparks or flames
No maintenance/no batteries
Non affected by rain or wind
Waterproof (can be used under water)
Buoyant
Suggested Applications
Marking obstacles
Refuelling/maintenance lights
Traffic control visibility at night
Underwater operations. Scuba diving emergency light
Evacuation lighting (visible even in dense smoke)
Tunnels egress route
Maps reading
Cockpit Light
|
|
Series C-LUX 6108 and 6508 compact emergency lighting fitting can be used for safety illumination, but also as information or emergency exit sign lights.
Series EXLUX 6008 and EXLUX 6408 light fittings can be used for safety illumination.
The single-battery-supplied emergency lamps of the ECOLUX 6608 lighting series are employable as safety lighting in accordance EN 60598.
Series 6118 (Zone 1) and 6518 (Zones 2, 21 and 22) compact emergency light fittings in sheet-steel can be used for safety illumination, especially in spraying and painting installations as well as in clean rooms.
Series 6018 (Zone 1) and 6418 (Zones 2, 21 and 22) emergency light fittings in sheet-steel can be used for safety illumination, especially in spraying and painting installations as well as in clean rooms.
|
|
Britesign Innovative exit sign offering stylish design, superb uniform illumination and an LED light source design life of 50,000 hours to minimise maintenance requirements switchable maintained operation Legend assembly is available in a choice of finishes and is ordered separately see related items at the bottom of the page
50,000 hour life LED's
Light source lasts many times longer than traditional fluorescent type.
Superb legend illumination
Choice of colour finishes
Switchable maintained output
|
|
Features
• Flashing LED for High Visibility
• Low Power Consumption
• Easy to Wear
• Extremely Light Weight
• Highly Reflective Stripe
• Exceptional Durability
• Ultra Bright LEDs
Applications
• Construction Workers
• Pedestrians, Joggers
• Police, Fire Departments
• Safety Workers
• Night Workers
• Nighttime Recreational Activities
• Parking / Valet Attendants
|
|
General Information
3 hour Maintained Exit SE .
Substantial Exit sign with large downlighter panel and excellent viewing distance. The legend is screen printed on the inside of the panel to prevent abrasion damage during cleaning etc. Please note legend needs to be ordered separately see related items at bottom of page
Large viewing distance
Robust construction
Internally screened legend
|
|
|
Angst+Pfister has concentrated its safety technology program on the theme of "illuminated safety systems", containing a very diversified and high-standing range of products. This comprises: (a) stationary emergency and warning lamps, mobile emergency lamps, monitoring equipment for emergency lamps having a single battery and special lamps for use in potentially explosive environments, and (b) a series of emergency electricity supply systems. This extends from simple centralized emergency battery electricity supply systems to complete plants with microprocessor controlled functional control systems and separate monitoring of individual lamps, without the need for additional data transmission lines.
|
|
Features:
- LEDs last 100,000+ hours
- One size fits S- XL
- Instant visibility
- Multifunctional
- Reflective yellow tape
- High shock and vibration resistance
- Light weight and easy, convenient in use
- Replaceable CR2032-cell batteries 6 come with it
- Only one used at a time
Applications:
- Campers, hunters, hikers
- Bikers, roller-skaters, runners
- Personal emergency lighting
- Perfect for kids and pets
- Earthquake and hurricane emergency kits
|
|
General Information
Intelligent analogue addressable heat detector for use with JSB FX3302SS systems.
Heat detectors are best suited to environments where dust or smoke would regularly be present making the use of a smoke detector impractical.
approved to EN54 part 5
Ideal for smoky or dusty environments
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236321
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Heat (fixed only)
|
|
General Information
Intelligent analogue addressable optical smoke detector for use with JSB FX3302SS systems
approved to EN54 part 7.
Optical detectors are most responsive to large visible smoke particles and are best suited to slow burning or smouldering fires
Ideal for detecting smouldering fires
Easy to dismantle for on site cleaning
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236307
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Photo Electric
|
|
| ... products without technical information |
| |
The CLB series LED bar light provides longer service life with lower power consumption and less heat generation than conventional fluorescent lamps.
* 24V DC (No polarity)
* Light lengths available in 100mm, 200mm and 332mm.
* LED colors available in clear/white, red and amber.
* 300lx luminous intensity at 50cm. (CLB-24N-C type)
* Light does not contain infrared or UV rays, which radiate heat and damage materials.
* Stable illumination over wide operating temperature range from 30°C to 60°C.
|
|
The CLF series high power LED work lights in various lengths and colors provide long service life and maintenance-free operation.
* 24V DC (No polarity).
* High power 1,700lx illumination* for precise work operation. (*Luminous intensity at 50cm, CLF20-24-C type)
* Light length available in 130mm and 230mm.
* LED colors available in red, amber and clear/white.
* Water and dust-proof IP67 construction.
* Light does not contain infrared or UV rays, which radiate heat and damage materials.
* Stable illumination over wide operating temperature range from 30°C to 60°C.
|
|
The CLT series IP66G/IP67G rated oil and water resistant LED light bar for the extreme use environment.
* High power LEDs provide long service life, maintenance free operation, low current consumption as well as low heat generation which cannot be realized by conventional fluorescent light.
* Uniform light distribution at the high luminous intensity of 500lx at 50cm with 16 high power white LEDs.
* Ideal illumination for the workplace inspection light as LED illumination does not emit the flicker or stroboscopic effect.
* 24V DC (No polarity).
* IP66G/IP67G construction with robust aluminum body and tempered glass cover.
* Light does not contain infrared or UV rays, which radiate heat and damage materials.
* Stable operation over wide temperature range from -30°C to 60°C.
* Three wiring options available depending on the installation;
1. CLT30-24S-CD: Side wiring type
2. CLT30-24L-CD: Multi-drop wiring type
3. CLT30-24T-CD: Terminal block wiring type
|
|
Highlights HLWQE 1
- No maintenance costs for 5.7 years! (50,000 h useful life at 700 mA - Decrease in luminous flux about 70%)
- Hart-coated aluminium housing for improved wear and corrosion protection
- Protection from electrostatic charge and polarity reversal
- Choose between spot or area light
- Special lens holder for maximum luminance
- Insentive to vibration and temperature changes
|
|
|
|
|
|
FLAT LED - LED Flood Light
FLAT LED - A machine luminaire with minimal height, maximum luminous power and intelligent PLUG + LIGHT electronics, which allows direct connection to 24-volt direct or alternating current. The impressively flat design is the result of innovative Waldmann optics technology. It produces a beam angle of 60º, which ensures large-scale, uniform illumination of the processing area. As a result, process reliability and productivity are increased.
Characteristics:
* FLAT LED - maximum light with minimum height - perfect for machines with small installation space.
* Intelligent PLUG + LIGHT electronics, which allows direct connection to 24-volt direct or alternating current.
* PLUG - fast installation, thanks to integrated LED operating device.
* LIGHT - safe operation without stroboscopic effect and minimal heat build-up.
* High-performance LEDs with a service life of 50,000 hours.
* Available in FLAT LED mounted / integrated version.
* Absolutely waterproof - system of protection IP 69K.
|
|
SPOT LED 003. PLUG + LIGHT
Waldmann underscores its claim as an innovation leader with the new machine luminaire SPOT LED 003:
- No stroboscopic effect.
- Intelligent circuit board.
- No heat generated in the direction of the light beam.
- Depending on the application, the SPOT LED 003
can be flexibly used as either a spot or area light.
- Service life up to 50,000 hours or around 6 years of continous operation.
- Insensitive to vibrations and knocks.
- High blue proportion in the light of the LEDs promotes
concentration and motivation.
- Compact dimensions.
|
|
LED Machine Luminaire SLIM LED
The SLIM LED is the lighting solution for machines and equipment with space-constraints and limited installation space.
The sleek profile of the luminaire is not one millimeter higher and wider than necessary.
The luminous power, in contrast, is tremendous. SLIM LED luminaires are
equipped with the latest LED technology.
This allows large-scale and powerful illumination of machine workplaces.
In addition, the light emission direction can be individually adjusted.
SLIM LED luminaires are available in lengths ranging from 196 to 1176 mm - flood lighting made to measure.
|
|
|
|
|
|
FLAT TEC - More freedom for your engineering
FLAT TEC is the new generation of machine luminaires, which are considerably flatter than all comparable systems. This not only allows for greater engineering freedom, but also meets the demands for a contemporary design. In addition, they offer further benefits, such as clearly higher light efficiency, easy integration, considerably longer maintenance intervals, and lower service costs.
FLAT TEC characteristics:
* More freedom - thanks to the flat profile, the entire machine compartment is accessible.
* More light with equal energy consumption - modern T16 light tubes produce considerably higher luminous flux rates than comparable lamps, are shorter and have a smaller diameter.
* Easy integration - The luminaire is connected easily and safely via a plug connection.
* An intelligent thermal management system significantly increases the service life of lamps and operating devices. The benefits are longer maintenance intervals as well as reduced spare parts and service costs.
* Robust design for the toughest requirements - Anodized metal housing made of aluminium. 100-percent leak-proof through special corner seals, resistant to conventional coolants and lubricants. High strength and stability due to 4 mm thick safety glass.
* Absolutely waterproof – IP 69K protection class, pressure jet-tested up to 100 bar.
|
|
|
Waldmann inspection luminaires are always used when colors, surfaces, and material quality need to be checked visually. In addition to their use in printing, inspection lights are essential also in many other areas.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
