|
|
|
The QUESTemp® II personal heat stress indicator monitors an individual’s body temperature for indications of the onset of heat stress. It warns the user when their personal body temperature has risen above the "safe" level and that action should be taken to allow the body to cool.
|
|
|
|
|
|
- Conforms to the detection requirements of EU Reg. N°1862/2006
- Conforms to the provisions of EU Reg. N°857/2005 for Airport Security
- Automatic Detection of Weapons hidden in the shoes and simultaneous discrimination of the metal components of the shoes
- Increase in Passenger Flow Rate
- Reduction up to 10 times the number of shoes that must be examined manually
The dramatic events of 11th September 2001 caused the Airport Security Authorities to strengthen checks on passengers and their personal effects.
Notwithstanding the extremely high discrimination capability of last-generation CEIA walk-through Metal Detectors, a certain percentage of shoes containing significant metal masses still cause alarms during transit, and so have to be examined by security staff with another inspection system – usually the X-ray scanner – to ensure that there are no meal weapons hidden in them. This obviously causes inconvenience to the passengers in transit.
In the light of this new operational scenario, CEIA has developed the SAMD Shoe Analyzer to check shoes worn by passengers without having to remove them, employing low-frequency electromagnetic fields which are non-ionizing and completely harmless.
The SAMD Shoe Analyzer is an extension of the Walk Through Metal Detector Gate, which complies with the most recent, stringent security requirements, reduces by up to 10 times or more the number of shoes that must be examined manually because of metal alarm.
|
|
|
|
|
|
- Complete Security Detection
- Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit
- Very High Speed of Detection
- High Immunity to External Interferences
- Direct Selection of the International Security Standards
- High Reliability
- Local or Remote Programming with Networking Capabilities
The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Security Standards.
A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. Three operating modes are available: Floating (standard): the location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones: the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.
HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector.
The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.
|
|
Smoke detector (smoke sensing using optical light scatter principle) to prevent transfer of smoke via the ventilation ducting in air conditioning systems. Suitable for control and release of fire and smoke dampers with General Building Approval equipped with electric or electro-pneumatic release mechanisms and working on the principle of power off to close.
Essential features
- Granted General Building Approval Z-78.6-125 by the German Institute for Structural Engineering, Berlin
- Can be used for air velocities of 1 m/s to 20 m/s
- Independent of air flow direction
- With integral mains adapter (supply voltage 230 V, 50 / 60 Hz)
- With potential-free signal and alarm relays
- With integrated signal lamps
- With contamination level indicator and "tracking" of sensitivity threshold (long service life)
- Can be used regardless of product or manufacturer
- Annual maintenance
|
|
Donadon PS/R (rectangular) and PS/C (circular) explosion vent panels are composite tension panels composed of three parts:
• A slotted, perforated metal part
• A seal membrane (usually in PTFE)
• A protection section
Vacuum support and intrinsic safety alarm system Donadon IRP (certified Eex ia IIC T6) are available.
Suitable for use with gas in static, pulsating and cyclic conditions.
PS explosion vent panels are available in square, rectangular or circular models. They usually have very low vent or vacuum pressures.
PS/R and PS/C explosion vent panels are mainly fitted to dust manifolds, dryers, troughs, silos, separators, mixers, boosters, air filters and sieves.
They can be fitted between welded frames or non-machined profiles in carbon or stainless steel. Machined frames or expensive holders are not necessary.
Explosion vent panels may be supplied in ATEX execution
|
|
General Information
Intelligent analogue addressable heat detector for use with JSB FX3302SS systems.
Heat detectors are best suited to environments where dust or smoke would regularly be present making the use of a smoke detector impractical.
approved to EN54 part 5
Ideal for smoky or dusty environments
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236321
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Heat (fixed only)
|
|
General Information
Intelligent analogue addressable optical smoke detector for use with JSB FX3302SS systems
approved to EN54 part 7.
Optical detectors are most responsive to large visible smoke particles and are best suited to slow burning or smouldering fires
Ideal for detecting smouldering fires
Easy to dismantle for on site cleaning
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236307
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Photo Electric
|
|
or a door
drive control system. A range of similar
equipment for potentially explosive
environments is also available.
Smoke and heat detectors
Dictator provides complete hold-open systems for fire protection doors that are normally kept open but that have to be closed reliably in case of a fire.
One component of the hold-open system are the tested and approved DICTATOR smoke and heat detectors. They provide reliable detection of smokeor temperature rise.
They are powered by DICTATOR power packs.
Also according to the ATEX 100 directive for the use in hazardous areas.
Further DICTATOR products for hold-open systems:
Electromagnets
Door operators for fire protection doors, also in ex-proof design
Furthermor DICTATOR furnishes a smoke alarm for private dwellings.
|
|
ALG-V, Photoelectric Smoke Sensor
STANDARD FEATURES
Built-in optical fire test feature
Uses the noise immune Digital Communication Protocol (DCP), which utilizes interrupts for fast response to fires
Automatic compensation for sensor contamination
Simple and reliable device addressing method
Flat Response Photoelectric Chamber
Low Profile - Only 1.97" high, including base
|
|
|
|
|
|
Spark Detector FM 1/8
All three sensor types have high-sensitive electronics which detect even the smallest of glowing particles. The detector FM 1/8 features reliable function even in very dense material flow or when the optical element is covered by a dust layer. It can be used at material temperatures up to 60 °C which corresponds to a temperature range of extraction systems for woodworking machines, like for example saws, planes, sanding machines etc.
Spark Detector FM 3/8
The detector FM 3/8 is used for operating temperatures up to 360 °C as they can appear for drying processes for example. Spark radiation is led through fibre optic cables to the detctor itself.
Daylight Spark Detector DLD 1/8
For a reliable detection of glowing or hot particles it has to be assured that no ambient light is present at the inspection place. Where an absolute dark surrounding cannot be guaranteed sensors which aren't sensitive to daylight or other ambient light are used. These sensors only operate in the spectrum of infrared light so they can be installed even at open transfer points or on conveyor belts.
|
|
50 SD sensor of photoelectric smoke based on the Tyndall effect. The sensor is already complete of hoof for the logons. Led of memory 100 BUZZER but and, alarm escape to state of signalling alarm and anomaly. TEST alarm with magnet. In compliance with the Norms EN54, Min Certification. Int. Rome.
SD 50/12: as SD50 but with complete hoof of relè for operation with centers them to 12 V, it can be used in coupling to one centers them antitheft.
TECHNICAL CHARACTERISTICS
Feeding: from 9 to 24 Vcc.
Absorption: 43 µA in quiet and 38 but in alarm.
Accessories: A46 ring spacer for hoof detector.
|
|
| ... products without technical information |
| |
|
The CA-210 LCD Color Analyzer is Konica Minolta's "next generation" color analyzer designed to measure color luminance, gamma characteristic and flicker on various types of Flat Panel Displays including LCD and EL. Faster than previous generation analyzers, the CA-210's measurement of luminance and chromaticity at up to 20 times/second makes it ideal in high production environments. (AND it can simultaneously measure up to five points on the screen. ) The CA-210's special optical design limits acceptance angle to within ± 2.5 degrees, thus eliminating the influence of the LCD's viewing angle dependency. Matrix calibration allows for high measurement of LCD displays that provide colors through additive mixing of three monochrome colors (R,G,B). A new low luminance capability enables measurements as low as 0.1cd/m2
|
|
Verify the opacity of containers with on-line, high-speed, accurate and reliable measurements. The OPAX-1000™ combines proven sensor technology with innovative hardware to provide an easy-to-use system to measure light transmission in a wide variety of applications.
Many products require packaging designed to protect the contents from the damaging effects of light. Establishing pass/fail criteria for minimum opacity of these containers and providing on-line measurement eliminates defects and allows real-time quality control of these processes. The OPAX-1000™ provides a reliable solution, allowing you to monitor every container, and identify and remove containers with low opacity.
|
|
The module PW0049 is a stand-alone measuring device which is conceived for the absolute measurement of self-illuminating objects.
Its function is to reproduce the CIE 1931 2° CMF's as precisely as possible. The resulting Tristimulus measuring values X, Y, Z form the basis of most of the common color spaces used today.
|
|
Konica Minolta Sensing is the leading provider of Display Measurement instruments offering a broad range of highly specialised equipment to measure chromacity, luminance, flicker and color uniformity of any modern flat panel display using LCD, Plasma or OLED technology.
Display measuring solutions from Konica Minolta are considered "state of the Art" and are part of quality control devices in the production line of all major Display Manufacturers on a global scale.
|
|
|
|
|
|
The DTS 500 positioning system complements the operation of Instrument Systems spectrometers by providing a route to full automation of measurements. The positioning system is in particular suitable for determining viewing angle dependent properties and spatial homogeneity of display, panel graphics and LED lamp modules. The DTS 500 saves valuable time by eliminating manual alignment and guarantees more exact results with improved reproducibility. Operation of the entire 5-axis system is fully integrated into the SpecWin Pro software. Measurement results can be viewed as luminance and contrast distributions in Cartesian or spherical coordinates with ISO contours lines. Data can additionally be exported in table format to Excel.
The DTS 500 is available in various configurations:
- stand alone XYZ positioning system (e.g. for testing back-lit display and control elements for the automotive and aviation industries)
- stand alone 2-axis goniometer (e.g. for measuring the spatial radiation pattern of lamp modules)
- complete 5-axis system mounted on an optical bench (e.g. for testing LCD displays and entire instrument clusters)
- optional mountings for TOP 200, LumiCam 1300 and LumiCam 4000 available
|
|
CA-100Plus has higher speed, higher performance, and lower cost than its predecessor, the CA-100, which has been a standard of the CRT manufacturing industry since 1990.
Engineered for both bench top and production floor use, and fully compatible with data from the earlier CA-100 model, the new Minolta CA-100Plus CRT Color Analyzer provides higher speed (maximum 20 times/second), as well as Luminance and Chromaticity measurements with a new low luminance capability to 0.05cd/m2, making it suitable for measurement of gamma characteristic and contrast adjustment. The CA-100Plus is equipped with 100 memory channels. Up to 5 sensing probes can be used for simultaneous multiple point measurement. A USB interface connects the CA-100Plus to a computer, and the NEW Software Development Kit makes it easy to use Visual Basic or Visual C to automate measurement and adjustment factors.
|
|
|
Gentec-EO offers OEM customers the highest flexibility so that you make no compromise. Whether you want a different housing, a specific sensitivity or another output connector, we have a solution for you. We will adjust existing models or design a whole new detector to best meet your needs.
|
|
Mii 2 mobile Color Analyzer PR0084
With the Mii 2 mobile Color Analyzer PR0084 acts it around a highly precise and highly sensitive color measuring system for the calibration of monitors. In the scope of supply a software is already contained, additional for on-line colorimetry is software for monitor calibration available.
Technical data:
Detector XYZ (CMF) silicone photo Cell
Optics 2 degrees of opening angles
Measuring range Luminanz: 0,05 to 3.000 cd/qm
Chromaticity: 0,05 to 500 cd/qm
Genauigkeiten* Luminanz: +-2% 1 digit (1 ~3,000cd/m2)
Chromaticity: +-0,002 Illuminant D65
Chromaticity: +-0,0025 CCT 4000-15000K
Chromaticity: +-0.0065 for other colors
Interface USB 2.0
Current supply of 4.7 to 5,5V DC over USB plugs
Measuring speed of max. 10 Messungen/s for low sensitivity
Max 4 Messungen/s for high sensitivity
Temperature compensation 20 to 40 degrees
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
