|
|
|
|
|
|
Different Signalling and Monitoring Equipment, Cameras, Traffic Lights, Optical Beacons, Signal Beacons, Horns, Grounding Systems
Flashing Beacon and Continuous Beacon:
Explosion protection to CENELEC, IEC
For use in Zone 1, Zone 2, Zone 21 and Zone 22
Saltwater-proof aluminium enclosure with polycarbonate hood
Flashing frequency 1 Hz
Integrated Ex e service compartment
Available in clear, signal yellow, red, blue, green and orange
Flashing energy 5 Joules
Continuous beacon in LED technology
Signal Beacon:
Explosion protection to CENELEC, IEC
For use in Zone 1, Zone 2, Zone 21 and Zone 22
Different Versions (rotating mirror beacon, rotating beacon, beacon with double flash (14 J), flashing beacon (15 J))
Saltwater-proof aluminium enclosure with glass hood
Integrated Ex e service compartment
Glass hood available in clear, signal yellow, red, blue and orange
Halogen lamp 20 W, 35 W
Grounding Systems:
Monitored electrostatic grounding of road tankers and tank wagons during the loading and unloading of flammable liquids
Safe vertification of the connected object-distinction between road tanker and other objects like loading platform
For use in Zone 1 and Zone 2
Robust design
Easy installation and operation
Two potential free contacts for signalisation to the control system and control of alarm devices
CCTV Camera:
Explosion protection to CENELEC, IEC
Can be used in Zone 1 and Zone 2
Camera with lens, power supply, ready to run for installation in factory
Cameras can be provided by customer
Available with swivel-tilt head, protective cover
Optional thermostatically controlled internal heating
|
|
|
|
|
|
- Conforms to the detection requirements of EU Reg. N°1862/2006
- Conforms to the provisions of EU Reg. N°857/2005 for Airport Security
- Automatic Detection of Weapons hidden in the shoes and simultaneous discrimination of the metal components of the shoes
- Increase in Passenger Flow Rate
- Reduction up to 10 times the number of shoes that must be examined manually
The dramatic events of 11th September 2001 caused the Airport Security Authorities to strengthen checks on passengers and their personal effects.
Notwithstanding the extremely high discrimination capability of last-generation CEIA walk-through Metal Detectors, a certain percentage of shoes containing significant metal masses still cause alarms during transit, and so have to be examined by security staff with another inspection system – usually the X-ray scanner – to ensure that there are no meal weapons hidden in them. This obviously causes inconvenience to the passengers in transit.
In the light of this new operational scenario, CEIA has developed the SAMD Shoe Analyzer to check shoes worn by passengers without having to remove them, employing low-frequency electromagnetic fields which are non-ionizing and completely harmless.
The SAMD Shoe Analyzer is an extension of the Walk Through Metal Detector Gate, which complies with the most recent, stringent security requirements, reduces by up to 10 times or more the number of shoes that must be examined manually because of metal alarm.
|
|
|
|
|
|
- Complete Security Detection
- Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit
- Very High Speed of Detection
- High Immunity to External Interferences
- Direct Selection of the International Security Standards
- High Reliability
- Local or Remote Programming with Networking Capabilities
The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Security Standards.
A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. Three operating modes are available: Floating (standard): the location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones: the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.
HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector.
The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.
|
|
Smoke detector (smoke sensing using optical light scatter principle) to prevent transfer of smoke via the ventilation ducting in air conditioning systems. Suitable for control and release of fire and smoke dampers with General Building Approval equipped with electric or electro-pneumatic release mechanisms and working on the principle of power off to close.
Essential features
- Granted General Building Approval Z-78.6-125 by the German Institute for Structural Engineering, Berlin
- Can be used for air velocities of 1 m/s to 20 m/s
- Independent of air flow direction
- With integral mains adapter (supply voltage 230 V, 50 / 60 Hz)
- With potential-free signal and alarm relays
- With integrated signal lamps
- With contamination level indicator and "tracking" of sensitivity threshold (long service life)
- Can be used regardless of product or manufacturer
- Annual maintenance
|
|
General Information
Intelligent analogue addressable heat detector for use with JSB FX3302SS systems.
Heat detectors are best suited to environments where dust or smoke would regularly be present making the use of a smoke detector impractical.
approved to EN54 part 5
Ideal for smoky or dusty environments
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236321
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Heat (fixed only)
|
|
General Information
Intelligent analogue addressable optical smoke detector for use with JSB FX3302SS systems
approved to EN54 part 7.
Optical detectors are most responsive to large visible smoke particles and are best suited to slow burning or smouldering fires
Ideal for detecting smouldering fires
Easy to dismantle for on site cleaning
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236307
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Photo Electric
|
|
|
The QUESTemp® II personal heat stress indicator monitors an individual’s body temperature for indications of the onset of heat stress. It warns the user when their personal body temperature has risen above the "safe" level and that action should be taken to allow the body to cool.
|
|
or a door
drive control system. A range of similar
equipment for potentially explosive
environments is also available.
Smoke and heat detectors
Dictator provides complete hold-open systems for fire protection doors that are normally kept open but that have to be closed reliably in case of a fire.
One component of the hold-open system are the tested and approved DICTATOR smoke and heat detectors. They provide reliable detection of smokeor temperature rise.
They are powered by DICTATOR power packs.
Also according to the ATEX 100 directive for the use in hazardous areas.
Further DICTATOR products for hold-open systems:
Electromagnets
Door operators for fire protection doors, also in ex-proof design
Furthermor DICTATOR furnishes a smoke alarm for private dwellings.
|
|
ALG-V, Photoelectric Smoke Sensor
STANDARD FEATURES
Built-in optical fire test feature
Uses the noise immune Digital Communication Protocol (DCP), which utilizes interrupts for fast response to fires
Automatic compensation for sensor contamination
Simple and reliable device addressing method
Flat Response Photoelectric Chamber
Low Profile - Only 1.97" high, including base
|
|
|
|
|
|
Spark Detector FM 1/8
All three sensor types have high-sensitive electronics which detect even the smallest of glowing particles. The detector FM 1/8 features reliable function even in very dense material flow or when the optical element is covered by a dust layer. It can be used at material temperatures up to 60 °C which corresponds to a temperature range of extraction systems for woodworking machines, like for example saws, planes, sanding machines etc.
Spark Detector FM 3/8
The detector FM 3/8 is used for operating temperatures up to 360 °C as they can appear for drying processes for example. Spark radiation is led through fibre optic cables to the detctor itself.
Daylight Spark Detector DLD 1/8
For a reliable detection of glowing or hot particles it has to be assured that no ambient light is present at the inspection place. Where an absolute dark surrounding cannot be guaranteed sensors which aren't sensitive to daylight or other ambient light are used. These sensors only operate in the spectrum of infrared light so they can be installed even at open transfer points or on conveyor belts.
|
|
50 SD sensor of photoelectric smoke based on the Tyndall effect. The sensor is already complete of hoof for the logons. Led of memory 100 BUZZER but and, alarm escape to state of signalling alarm and anomaly. TEST alarm with magnet. In compliance with the Norms EN54, Min Certification. Int. Rome.
SD 50/12: as SD50 but with complete hoof of relè for operation with centers them to 12 V, it can be used in coupling to one centers them antitheft.
TECHNICAL CHARACTERISTICS
Feeding: from 9 to 24 Vcc.
Absorption: 43 µA in quiet and 38 but in alarm.
Accessories: A46 ring spacer for hoof detector.
|
|
| ... products without technical information |
| |
The thermographic system VarioCAM® hr head of the German manufacturer JENOPTIK Laser, Optik, Systeme GmbH is suited for various measuring tasks up to real-time analysis in R&D.
microbolometer FPA detector with (384 x 288) or
(640 x 480) pixels
spectral range (7.5 ... 14) µm
optional digital real-time interface (FireWire/IEEE 1394)
50/60 Hz frame rate
compact design, low weight
rugged metal housing (IP 65)
wide standard temperature measuring range
various IR lenses, various accessories
optomechanic microscan-function provides up to (1,280 x 960) infrared pixels
|
|
|
Infrared vision systems are used worldwide in a variety of industries to monitor continuous processes. Infrared can easily detect thermal information on product quality and/or production efficiency that is difficult or impossible to capture using conventional means such as thermocouples or visible light cameras. The ThermoVision A40-M is an affordable and accurate temperature measurement system. It is the ideal choice for industrial and automation applications requiring accurate non-contact temperature measurement.
|
|
| ... products without technical information |
| |
The VT55 is a powerful and compact tool for all car manufacturers smart tire pressure devices.
You only have to select the car manufacturer on the VT55 menu and the tool find which TPMS sensor is installed on!
It also displays sensor data including: sensor ID, pressure, battery state and temperature.
Its compact size and very easy operation makes it the ideal maintenance TPMS tool.
|
|
ATEQ's offer includes:
1. An automatic solution
Automatic industrial station for vehicule equipped with pressure monitoring valves.
Installed on a production line, the ATEQ station sends each identifier code to the E.C.U (Engine Computer Unit) of a vehicule through the intermediary of the factory network. (VT520)
Industrial tools for "alterations" : ATEQ-VT
2. A solution for After-sales services
Simple tools to "awake" pressure monitoring valves.
(VT5 - VT10 - VT40 - VT50 - VT60 - VT70 - VT80)
|
|
|
Electromechanical NC joining systems systems offer significantly more advantages than hydraulic presses. NC drive control allows accurate positioning or force-controlled joining and force-displacement evaluation in both the compression and the tension direction. The new generation of NC joining modules is outstanding for its extremely compact design with integral piezoelectric sensor.
|
|
The electro mechanical assembly units of the PREFERENCE SERIES are available in a large selection of force ranges and nominal strokes. Due to their modular construction, the units can be integrated in automated assembly lines as well as in manual work-places. A special synchronous belt connects the motor directly with ball/roller gear drive and guarantees a positioning accuracy of 0.01 mm. The angled motor favours a low installation height. This is of high importance if the unit has to be installed under a conveyor belt or a transfer system.
The mechanics comprise of the following components:
- Round steel housing with mounting flange
- Ball / Roller gear drive
- Force transducer
- Axial bearing
- Press ram
- AC-servomotor
|
|
|
Electromechanical NC joining systems systems offer significantly more advantages than hydraulic presses. NC drive control allows accurate positioning or force-controlled joining and force-displacement evaluation in both the compression and the tension direction. The new generation of NC joining modules is outstanding for its extremely compact design with integral piezoelectric sensor.
|
|
The electro mechanical assembly units of the PREFERENCE SERIES are available in a large selection of force ranges and nominal strokes. Due to their modular construction, the units can be integrated in automated assembly lines as well as in manual work-places. A special synchronous belt connects the motor directly with ball/roller gear drive and guarantees a positioning accuracy of 0.01 mm. The angled motor favours a low installation height. This is of high importance if the unit has to be installed under a conveyor belt or a transfer system.
The mechanics comprise of the following components:
- Round steel housing with mounting flange
- Ball / Roller gear drive
- Force transducer
- Axial bearing
- Press ram
- AC-servomotor
|
|
Open HMI Series
Modular and robustly Panel PC-Systems
Installation in hazardous areas worldwide: Zones 1, 2, 21, 22 and Class1 Zone 1 and Class 1 Div 2
Marine approvals by DNV
Applications:
- Machines and package units
- tankfarm automation
- for use on ships
- Operator interfaces for process automation
Highlights:
- no fan or rotating parts
- modular and service friendly design
- multilingual Windows XP installation
- system integrated touchscreens with 150 language layouts and login function (Windows Login)
- extended temperature range for outdoor installation
- many communication interfaces
- system backup and recovery via USB-Stick
- useable in clean rooms according GMP
|
|
Operator Interfaces Eagle Series
Universal operator interfaces with extensive functionality up to imple process visualization
Installation in hazardous areas worldwide: Zones 1, 2, 21, 22 and Class 1, Zone 1 and Class 1 Div 2
Marine approvals by DNV
Applications:
- Machines and package units
- Tankfarm automation
- for use on ships
- Operator interfaces in automation technology
Highlights:
- many functions for the optimum display and running of processes with international fonts (Unicode)
- connectivity to all major automation systems and PC networks
- easily integrable card reader systems
- extended temperature range for outdoor installation
- engineering with SPSPlus Win
|
|
|
The 977CM - Current Monitoring Pulsed DC Controller, brings together powerful long-range ionisation; closed-loop feedback; self-monitoring and remote reporting. A complete package, unique to Meech. Self-monitoring and adjustment of performance allows optimum control of static for much longer periods than previously possible. Local display and output signals alert operators to the need to clean the equipment.
|
|
|
|
see the results for the following category : 
