|
|
very resistant non slip covering adapted for safety, installation of signals, working aera, assembly lines, machine tool peripheries...
Non slip covering very comfortable and resistant for high traffic, anti-fatigue and anti-shock on industrial grounds.
Environment: In wet or dry conditions for free application. Chemical characteristic: Elastomeric polyurethane complex poured onto a polyester rotproof non-weaved undercoating. Thickness: 6.5mm Granule: Non abrasive flexible granules 800µ Weight: 7kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 55
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 10daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 100% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. |
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface
Comfortable non slip covering resistant for high traffic.
Environment: In wet or dry conditions for risk prevention and safety. Chemical characteristic: Elastomeric polyurethane complex poured onto a polyester rotproof non-weaved undercoating. Thickness: 2.1mm Granule: Non abrasive flexible granules 800µ Weight: 2.5kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 55
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 40% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 stuck application on surface M0 non insulating (LNE).
Classification building according to NF EN 14041 (LNE) CP1 S1. |
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface.
Non slip covering flexible, comfortable and conformable.
Environment: In wet or dry conditions for risk prevention and security. Chemical characteristic: Elastomeric polyurethane complex very flexible. Thickness: 1.6mm Granule: Non abrasive flexible granules 200µ Weight: 2.4kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 66
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 11.5daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Extention = 75% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 in application glued on surface M0 non insulating (LNE). |
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: Non abrasive flexible granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 65
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 20% before breaking.
Simple maintenance: Regular cleaning with water and household detergents. |
|
fine and gripping non slip covering recommended for high traffic for industrial aeras, stairnosing in building.
In self-adhesive size ready for use for applications on surfaces in aluminium, galvanized steel, stainless steel, polyester.
Non slip covering with coarse grip recommended for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex covered with coarse granules with high non slip performance on adhesive film. Thickness: 1.1mm Granule: Granules of hard particules 800µ Weight: 800kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 105
Coefficient on wet ground : 80
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 4% before breaking. Tensile strength 8.3MPA.
Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Resistance and non slip performance tests realized by BGIA according to standard DIN 51 130 classification R13 (BGR181). |
|
Thin film coating is a vacuum deposition procedure used to enhance the transmissive properties of an optical surface. The most common types of dielectric coatings are anti-reflection and high reflection coatings, but beam-splitter, band pass filter, edge filter, and polarizing coatings are also available. Because thin film coatings are more durable than optical glass, coatings also help protect an optic surface from scratches and the environment.
Optimax produces optics up to 300mm in diameter with a wide variety of narrow and broadband anti-reflection coatings including doublet interface coatings. Both metal and dielectric mirror coatings are also available. For custom coatings, we utilize TFCalc thin film design software. Please see the reverse side for sample reflectance curves.
Optimax performs test runs of all coatings before beginning production to ensure a good design. We use a Perkin-Elmer Lambda 900 Spectrophotometer to check the performance of the coating upon completion. Adhesion, abrasion, and humidity tests are available to verify coating durability in accordance with sections of MIL-C-675C, MIL-C-48497A, and MIL-C-13508C specifications. Laser damage testing is also available upon customer request. |
|
| ... products without technical information |
| |
| Paint & Varnish Remover is a fast and economical stripping agent for wood or metal surfaces. Its balanced blend of powerful solvents in a thick gel offers a heavy-bodied spray, which removes most finishes such as paint, enamel, varnish, shellac, epoxy, lacquer, acrylic, etc. It is easier and faster to use than conventional brush-on products and is non-corrosive, non-caustic, nonflammable, and washes away with water. 20 oz Can / 20 oz Net Wt. |
|
| ... products without technical information |
| |
GA-288 Pressure Gauge (0-160 PSI)
GA-313 Pressure Gauge (0-15 PSI)
GA-316 Pressure Gauge (0-160 PSI)
GA-333 Pressure Gauge (0-100 PSI)
GA-338 Pressure Gauge (0-160 PSI)
GA-73 Pressure Gauge (0-30 PSI)
GA-77 Pressure Gauge (0-30 PSI)
HAF-507-K12 WhirlWind In-Line Filter HAF
HAR-400 Air Regulator Lockout HAR
HARG-510 Air Control Regulator HARG
HAV-500 Air Adjusting Valve HAV
HAV-501 Air Adjusting Valve w/Gauge HAV
P-H-5516 Air Adjusting Valve
|
|
| ... products without technical information |
| |
| Unique design allows quick unclogging of spray tips without removing them from the spray gun. Plus, tungsten carbide orifice inserts ensure maximum erosion resistance. |
|
| These tubes are especially designed for the applications of painting, varnished and coating per pulverization. |
|
Differents types:
Direct Drive Agitator - Air Powered direct drive agitator assembly with 1/2 hp air motor and a three bade propeller to keep materials in suspension even with high solids.
Indirect Air Motor Drive - Standard duty, smooth running with gear reducer, 1/2hp, 15:1 ratio, 20 to 120 RPM. Inc throttling valve, fittings and hoses for connection to air supply on tank lid. Air consumption is approx 6CFM @ 50RPM.
Reciprocating Air Motor Drive - 180° reciprocating action provides excellent agitation of all types of materials. Particularly important for waterborne shear sensitive materials. Very low air consumption
|
|
In the delivery state (clamping ring barrel) the material is prepared and conditioned for use and transfer to the spray gun. Due to the pneumatic lid lifter, an empty barrel can be replaced easily with a full one. System components:
- Lid for attaching apparatus
- Pneumatic lid lifting device
- Agitator (electric or pneumatic powered)
- Pump with material filter
- Agitator switch off when lid is lifted pneumatically
- Compressed air fittings
All agitators are tested and certified in accordance with ATEX 94/9/EC. Versions without explosion protection are also available.
10 years of delivery guarantee for spare parts |
|
Were developed for high precision
flow metering for a wide variety of
liquids, especially liquids with high
abrasiveness and poor lubricity.
Applications include: chemical,
petrochemical, pharmaceutical and cosmetic
industry, two-component mixers,
paints, aviation.
Are dead spaced optimized for
(easy flushing) use in the paint industry
and for paint spraying systems. |
|
With the S-20 Tungsten Carbide Tool, Taber's Shear/Scratch Tester can evaluate coating adhesion on a variety of materials. A precision cutting tool is attached to a balanced and calibrated scale beam, then placed on the specimen. As the turntable rotates the specimen, the cutting tool will shear the coating, allowing you to verify proper adhesion. By changing the load on the cutting tool, you can determine the point of failure.
|
|
Cupping and Deep-drawing Cup Test Machine, Model 242
For testing lacquers and paints of all kinds for elasticity and adhesive quality using the Erichsen Cupping Test in conformity with DIN ISO 1520, ISO 1520, BS 3900:Part E4, NF T 30-019 and SIS 18 41 77 and deep drawing cup test. Matched test tools permit automatic sequence of operations: pressing the test piece, cutting the blank, exerting the sheet holder pressure, deep drawing, sheet holder pressure release, stripping of cup, return of punch to initial position and switch-off of machine.
The testing machine including one test tool according to DIN ISO 1520. |
|
Lacquer and Paint Testing Machine, Model 202 C
Version with electro-hydraulic drive for coated sheets up to 1.5 mm thick. Infinitely variable control of drawing speed up to 50 mm/min. Automatic clamping of specimen. By virtue of the C-form test head aperture it is possible to test sheet metal panels in addition to sheet metal strips.
Option:
Camera module VIDEOMASTER USB comfortable observation of the deep drawing process or stereo microscope. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| Pressure tanks made of galvanised steel or stainless steel are available in many sizes (1 litre - 250 litres). Due to uniform, pulsation-free material transfer from tank to gun, a first class spray pattern and a high working speed is achieved. If necessary, pressure tanks can be fitted with air-powered or electric agitators in order to achieve high hue accuracy and a homogeneous surface finish. WALTHER PILOT offers complete systems for all requirements. WALTHER PILOT manufactures pressure tanks in accordance with strict requirements of pressure equipment Directive 97/23/EC. In accordance with Directive 94/9/EC (ATEX), WALTHER PILOT has the approval for manufacturing equipment for appropriate application in areas exposed to explosion threats. Furthermore, we are certified to manufacture and approve tanks in accordance with the US-American ASME-code as well as the Chinese Safety Quality License. 10 years of delivery guarantee for spare parts. |
|
Advantages include:
Tube-based system eliminates costly resourcing and loss of speed
Single-element analysis - ideal for Lead (Pb) checks
Definitive Pos./Neg. Classifications
No isotope licensing or travel restrictions
Ergonomic, lightweight design
Versatile PDA platform.
Easily measures uneven surfaces |
|
|
