|
|
Fast and highly energy efficient electrical heating of individual and multiple drums and containers.
If you are considering a bulky and fixed installation oven, then you should also evaluate our value for money and easy to use flexible jackets.
We manufacture heating jackets for single and multiple drums - our 1000 litre size (IBC) jacket with insulated lid is designed to fit around a pallet with four drums, so products can be heated anywhere.
Available for standard industrial applications and also with EX certification for ATEX and IECEx areas.
Custom sizes made to order.
Our Rigid THERMOSAFE Drum Heater can be linked with our FARATHERM or DIGIHEAT Base Heaters and our Insulated Lid to create a powerful mini-oven for fast melting of solids from steel drums.
|
|
The InteliHeat flexible heating jacket for IBC's and totes is ATEX and IECEx certified for use in potentially explosive atmospheres.
Constructed with patented technology using carbon rich semi-conducting heating membranes, safe operating conditions are maintained even in the presence of potentially explosive gases.
Heating rates are similar or better than our standard "safe area" IBC2 high power flexible jackets, and temperatures up to typically 70C can be achieved due to the high density insulation layers incorporated as standard.
No transformers are required as the unit operates from standard 220/240v supply.
This unique product is highly cost effective for heating IBC's in any Zoned area, and can be moved from container to container or kept in place whilst the container itself is moved. Therefore the user can avoid using expensive and space constraining ovens, and minimise heat loss at point of use.
|
|
Over-the-Side Immersion Heater - L / LC
Straight (L) and circular heating element bundles (LC) available. Moisture Resistant and Explosionproof enclosures.
|
|
| ... products without technical information |
| |
In ECAS we manufacture heating blankets and heating bands, for the control and maintenance of the temperature of drums and containers.
Models BFVFV and BFVIBC: Consists on an electric flexible resistance placed in a blanket or band, manufactured with fabric of glass fiber.
All our heating blankets and bands, controls and regulates the temperature with a thermostat recommended due the requirements of each project.
We manufacture blankets and bands for drums from 25 to 200 litres, and containers IBC of 1000 litres, but we also fabricate custom blankets.
Drums: of 200,100, 50 and 25 Litres
IBC container: 1.000 Litres
Power (W):
Drums 200 L: 750 W, 1.000 W, 1.500 W
Drums 100 L: 750 W
Drums 50 L: 300 W
Drums 25 L: 200 W
IBC Container of 1.000 L: 2.000 W
Range temperature: 0 - 80 ºC
Types of fasteners: Velcro. Plastic buckles or clasps, Grommets
Application
Heating of drums, storage tanks, Instrumental of laboratory, etc.
|
|
|
Heating sleeves to heat segments of 200 litre barrels per DIN. both the inner and the outer sheath of the barrel heating sleeve are made of aluminium sheet, which ensures maximum protection of the electrical components against mechanical damage. A hinge with campling closure that divides the heating surface into two semi shells permits convenient assembly, without the heating element needing to be bent. The barrel can be heated complete by using 3 sleeves.
|
|
Holroyd Silicone Side Drum Heaters (HSSD Belts)
• Silicone Rubber insulated
• Double insulated construction
• High temperature tolerance
• Simple spring catch Assembly
• 20c to 120c Thermostat
• 2 Metre Power cable
• Standard Sizes 25L, 50L, 105L, 200L
• Bespoke Sizes to order
• Ex-Stock
Holroyd Insulated Side Drum Heaters (HISD Jackets)
• Teflon coated polyester Jacket
• Water resistant
• Glass Filament Blanket Insulation
• Adjustable Quick release Buckles
• -5c to +40c or 0c to 90c Thermostat
• 3 Metre Power Cable
• Standard sizes 25L, 50L, 105L and 200L
• Bespoke Sizes to Order
• Double Insulation IP40
• Ex-Stock
Holroyd Base Drum Heaters (HBD)
• Robust steel construction
• Even heat over platen area
• 0-150c Thermostat
• 110 or 230 Volt Options
• 2 Metre armoured power cable
• Ex-Stock
|
|
|
|
|
|
The THERMOSAFE Induction Drum Heater has been proven world wide over more than 20 years as the fastest, most reliable and safest method of melting solids from steel drums, and for the speedy heating of viscous liquids.
It is certified to the ATEX and IECEx standards for use in potentially explosive atmospheres, and is IP66 rated, so can be used in wet areas (even hosed down whilst operational!) and other harsh environments.
The external surfaces are high grade glass reinforced resins able to resist chemicals and acids, so the heater can withstand accidental splashes of hot liquids. There are no moving parts and it is completely maintenance free, so its lifetime operating costs are incredibly low.
No contact with the steel drum is required, as heat is generated by the drum wall itself, so it is exceptionally energy efficient, saving over 50% compared to conventional radiant heaters, and even more compared to steam ovens.
These units can be used individually, for example in research labs or small batch blending plants, or in groups at point of use, as highly cost effective replacements for large drum ovens.
|
|
Insulated Flexible Heating jackets for containers and drums from 20 litres up to 1200 litres in size.
High grade insulation combined with a range of custom coated fabrics allow us to offer a performance specification from "winter warming" anti-freeze applications through to melting of solids from 200 litre drums.
Power ratings are suitable for both plastic and steel containers.
The jackets are easily fitted and removed using click-in buckles and straps, and can be handled safely even after use due to the outer insulation layers.
Standard adjustable dial thermostat ranges are upto 40 degrees C or upto 90 degrees C, with options upto 160 C and digital display of temperature.
Custom sizes can also be manufactured upon request.
Standard designs available for IBC's (Intermediate Bulk Containers) from most major manufacturers.
|
|
3a drum heater is a flexible panel with two coated fabrics : an heating side and an insulated side.
3a drum-heater is supplied with eyelets which, laced with an elastic rubber, lets the barrel heater lie flat on the barrel, essential condition for a good heat exchange.
In comparison with heating belts which need several main supplies and do not wrap totally the barrel, 3a barrel heater totally wraps the cylindric part of the barrel, allows smooth and homogeneous warming and, thanks to the insulated face, is maintaining temperature in the barrel for hours after you switched it off.
A utility is accessible to determine the time of heating necessary for the application.
|
|
Mica Drum Heater (GDH)
Heats low-melting-point solids in standard metal 55 gallon drums. Constructed of corrosion resistant nickel plated steel throughout. Features pilot light, infinite control switch, and 6 foot heavy duty rubber insulated cable.
|
|
DRUM HEATERS - for 200 litre barrels.
Drum Heaters facilitate the handling of solidified or viscous materials like adhesives, waxes, tar, chemicals, oils etc. They eliminate cumbersome methods and high investments, associated with steam and oil or fire wood heating.
Construction
Drum Heaters consist of a cylindrical metal cover carrying the flexible heating elements. A 2" thick thermal lagging of glass wool provides insulation and the metal casing makes for a rugged unit that can be wrapped snugly around the drum. The Drum Heater is hinged, and is mounted on castors for convenience. A base heater, also encapsulated in metal provides bottom heating. Control Panel incorporating thermostatic control is provided with the heaters.
|
|
|
|
|
|
HIBC/B Heater Jacket:
• Teflon/Polyester Jacket
• Dual power circuits
• Thermally insulated
• Adjustable quick release buckles
• 0-40c or 0-90c Thermostat
• Bespoke sizes to order
• 3 Metre power cable
• Double insulation IP40
• Ex-Stock
Size: 1000mm x 4400mm (3900mm Heated Length)
Rating: 110 or 230 Volts 2 circuits each 1000 watts.
Temperature Control: 0c to 40c or 0c to 90c
HIBC/A Heater Mat:
Rating: 2700 Watts 230 Volts AC
Temperature control: 20c - 90c Electronic controller (Digital readout)
The HIBC/A silicone heater mat comprises of a high temperature resistance wire element laminated between silicone/ glass sheets.
A PTC temperature sensor is also embedded between the sheets. This connects to an electronic temperature controller via the heater power cable and provides accurate measurement and fast response to temperature changes at the bottom of the IBC liner. This makes the heater suitable for both high-energy absorbing products and highly viscous, temperature sensitive materials.
|
|
3a IBC warmer is available with 2 different outputs:
- 3000W : a set of 4 heating flexible watertight pannels (1 heating red side and 1 insulated blue side) + 1 insulated top cover
- 1500W :a set of 2 heating flexible pannels (1 heating red side and 1 insulated blue side) and 2 insulated pflexible pannels + 1 insulated top cover.
3a IBC warmer is made of flexible pannels which you can fit together with gripping belts ; this way of gathering is good to lay heating pannels on containers, requirement necessary to get efficient heat exchange.
Avantages :
• Every of the heating parts is independant.
• Heat losses are restricted by efficiency of insulation.
• Thanks to the top cover opening, there is no need to put away the IBC warmer to fill in the container..
• A utility is available to determine the time of heating necessary for the application.
|
|
2000W: 1 heating flexible cover protected by two impregnated fabrics (a heating face and an insulated face) + 1 integrated lid
The Heater of IBC 3A allows a good application on the IBC, essential condition with a good heat exchange.
Advantages:
- One only feeding circuit
it quality of the heat insulator limits the losses and guarantees an effective and homogeneous heating,
it lid integrated into the cover, allows the filling without disassembling.
- Flaps make it possible to limit the losses under the ibc, they allow also the passage of the forks for handling.
Technical description:
Nominal nominal output: 2000 W
Standard tension: 230 V
Electric cable 3x1,5 ²: L 2m
External dimensions: 1000x4400
Color heating face: red
Color insulated face: blue
Index of protection: IP54
max. t° of maintenance (under tension): +60°C
max. t° of exposure (not under tension): +80°C
Integrated thermal protection: +80°C
|
|
The Murzan TUS-50 is the ideal solution for emptying up to 300 gallon containers of highly viscous, and/or heavy materials, applications which no pump alone can handle. This system quickly empties and cleans TOMATO PASTE containers without putting any pressure on the product or the container.
Advantages
* EASY TO CLEAN
* Empties 300 gallons of the heaviest and most viscous products, such as 33° Brix Tomato Paste in less than 12 minutes without adding any water, offering perfect control of the Tomato Paste Unloading
* USDA Listed
* Ability to run dry
* Maintains integrity of product
* Designed for CIP capability
* Metering capabilities
* Totally automatic
Applications
* Tomato Paste Concentrate
* Chocolate and Vanilla Fudge
* Fruit Concentrates
* Other viscous products
|
|
The OMVE MPV range
The OMVE Multi-Purpose Process Vessels are an essential part of a continuous flow process or a batch process. The MPV-range can be adapted to specific requirements based on the process and the products that have to be processed. Specific requirements can also be integrated.
The multi-purpose process vessels are available in 10, 25, 50 or 100 litres. Larger vessels are available on request.
All vessels are mounted on a mobile skid inclusive the instruments and controls.
The OMVE MPV vessels are suitable to use for:
- Mixing and Blending
- Desolving powders in liquid
- Aseptic) Buffering
- Fermentation
- Heat Treatment
- Deaeration / Degassing
|
|
Process Vessels
Our fabricators are capable of building vessels, heat exchangers, and systems to almost any specification and to the major standards such as ASME, ANSI, DIN, JIS, and KS. They have manufactured vessels and systems for major corporations around the world
|
|
process vessel
Preparation vessels for injectable solutions, eye-drops, syrups and other liquids with active principles in solution or dispersion
Manufacturing in compliance with the most rigorous cGMP guidelines for pharmaceutical processes.
Design: flanged, welded, hinged, liftable cover.
Stainless steel outer panelling, welded, tank-in-tank type.
Crevice-free execution, with mirror polishing of the surfaces where possible.
Wide range of agitators to meet customer%u2019s process needs:
- propeller type agitator
- disperser-homogenizer
- disperser
- anchor-type agitator
- magnetically entrained agitator
Membrane-type sanitary valves installed on the process side
Membrane-type discharge valve, zero dead lag
|
|
| ... products without technical information |
| |
Portable FUS pumps are designed for transferring chemicals contained in drums and barrels.
Produced in two materials: PP and AISI 304. Drive motors: single phase electrical or pneumatic.
General specifications:
Immersion depth: 1200 mm.
Tube Ø: 42 mm
Flow rate: max. 50 l/m.
Head: max. 10 m.
|
|
The model B50 is the functional answer to changed requirements in practice to the trend to ever larger bundles - up to 1200-litres-containers.
The B50 is constructed along the lines of a drum pump in order to maintain the proven features. These include: long life, reliability, low maintenance, reduced downtime, process and transfer time savings and not least enhanced safety and efficiency.
The Lutz container pump is so conceived that it can almost immersed and fixed into each container opening without the necessity of adjustment.
- High pump capacity
- Smooth running
- Low degree of wear
- Easy of handling
- Low weight, mobile unit
- Convenient Lutz hand-wheel for disconnecting the motor
and for use as a handle
- Drivem by a powerful capacitor start motor
|
|
|
The specialists for liquid transfer out of barrels and containers. Suitable for thin, neutral, corrosive or high flammability liquids. Successfully used in almost every industry all over the world !
|
|
... see all the products in the category
Drum pumps
|
 see the results for the following category : Inks |
|
|
