|
|
Ruffneck™ FR Heat Exchanger Unit Heaters are extra heavy duty (including heavy gauge steel construction) to meet the most demanding service and long life requirements for rugged industrial applications. The FR Series heaters are specifically designed for steam applications that may be subject to freezing conditions, and are of particular value for outdoor applications such as drilling rigs. They gain their resistance to frost damage through the use of rectangular top and bottom headers. Explosion-proof models suitable for hazardous locations available on custom order.
Ruffneck™ HP Heat Exchanger Unit Heaters are extra heavy duty (including heavy gauge steel construction) to meet the most demanding service and long life requirements for rugged industrial applications. The HP Series heaters are suitable for a wide range of heating fluids including steam, hot water, glycol, oil, etc. for both space heating and liquid cooling applications. Explosion-proof models suitable for hazardous locations available on custom order. For more information on the HP Series, visit http://www.ccithermal.com/products-ruffneck.php?product=hp
|
|
APV Compakva
Instantaneous compact water heaters and district heating units
Innovative technology and design
* The smallest unit of its type
* High thermal efficiency
* Low operating costs
* Low power consumption
* Easy to mount and clean
The series of Compakva units ranges from a simple water heater, consisting of a multi-functional block, a plate heat exchanger and thermostatic valve to more advanced district heating units with additional equipment including two plate heat exchangers, pump, expansion vessel and thermometer.
|
|
BOILERS WITH SERPENTINE HEAT EXCHANGERS
Boilers get heating energy from solar collector or central heating system and produce potable hot water. Fluid in the serpentines provides heat transfer water to water via transferring its heat energy to water in inner tank. Thus potable hot water will be produced.
Cylinder type hot water tank and serpentines in the tanks is coated with immersing to hot galvanize. Thus anode rod is not needed and you save your time and cost for changing anode rod. Due to special coating material heat transfer is faster and heating efficient is high.
You can observe water temperature with thermometer. You can set desired temperature with adjustable thermostats mounted to sensor holes. When water temperature has achieved desired temperature, thermostat will send a signal then circulation and recirculation pumps will be out off service. Thus it will prevent waste operation.
DCSB and DTSB series boilers are available for additional heating elements. Thus, especially in summer periods you can provide hot water with electrical supply without using central heating system. If you use DCSB-X and DTSB_X Series model with electrical command panel ask for temperature pressure valve which provides discharging excess water/steam pressure and temperature.
|
|
DSSY Industrial Type Electrical Water Heaters with Adjustable Thermostat
Diko DSSY Series Electrical Water Heaters provide potable hot water in short period, reliable, and designed for industrial application in standard power rates. DSSY series are with maximum capacity of 500 L, floor standing type, and has double excessive heat protection with its adjustable thermostat and safety thermostat. Safety valve prevents back flow of hot water. In addition, pressure valve is provided to discharge excess water/steam pressure, it prevents water heater from excess pressure. Temperature&Pressure valve (imported U.S.A) is a security device, provides to protect excess temperature and pressure and it is designed to control two factors.
DSSY series electrical water heaters have indicator, thermometer and adjustable thermostat.
* Water temperature will rise when you supply power from heating elements service cover.
* It will stop heating operation automatically when water temperature has achieved pre-adjusted temperature, and indicator will be off.
* It has long life with its tank which is not effected corrosive events, resisting to crack and spill, has special coating. It prevents placing of microorganisms with its special design
|
|
DSSY-X Industrial Type Electrical Water Heaters with Electrical Control Panel
DSSY-X series is commercial type electrical water heater with control panel which is developed for users special requirements, it is designed proper power for needs. X series which is designed to provide hot water in required time, and its optional DIKO.AG-05 Control Panel provides fault controls and measuring. Thus X series aims to make customers pleasure highest.
DSSY-X series can achieve a capacity of 2000 liters, floor standing, it has double protection against to excess temperature with its operation thermostat and safety thermostat. Provided check valve prevents to back flow of hot water. The third protection device is Temperature and Pressure valve. It is designed to discharge excess water/steam pressure; by the way it controls two parameters at same time.
DSSY-X series electrical water heaters is a water heater with thermostat which has control panel and thermometer and it is able to set water temperature in 30-75 C range.
|
|
|
Diko Marine Systems products are thermosiphones and thermo boilers specialized for marine use considering the extraordinary humidity - corrosive affects, vibration, temperature differences and the energy sources of marine environment. To supply the several needs of our customers, with an experience on electric water heater manufacturing since 1949, we have an extensive range of capacities (from 30 liters up to 2.000 liters ) for marine type thermo boiler and electric water heater models. Besides our extensive range of capacities, we respond to the special wishes of our customers according to orders.
|
|
* Efficient: Serves you plenty of hot water with out using extra energy. Marine products uses wasted engine coolants as an energy sources by circulating hot water, steam or oil through the thermal circuit serpentine exchangers immersed in the inner tank. Besides, the inner tank is isolated with polyurethane material to minimize the heat looses and maximize the efficiency.
* Durable: Inner tank, outer jacket and the electric control panel is electrostatic epoxy powder coated galvanize steel or ASTM 304L stainless steel. Additionally thermal circuit serpentines are manufactured from hot rolled ASTM A106 seamless steel tubes which are resistant to high pressure and temperature.
* Safe: All outer parts are IP 65 enclosure water, dust resistant and. Besides, for a better safety the door of the electric control panels are also covered with tight polyurethane joints and clamped. Considering safety of the device, low water cut out alarm and signaling system to disengage electrically the heating elements, high limit safety thermostat to power down the device in the event of overheating and ASME T&P relief valve to guard the potential risk. Leakage control system which shuts down power in an event of probable electric leakage, and 24V AC reduced control voltage
|
|
ELECTRICAL WATER HEATERS WITH SINGLE HEAT EXCHANGERS (THERMO BOILER)
Thermo boilers get its heating energy from solar collector, central heating system or electric heating element and produce potable hot water. Fluid in the serpentines provides heat transfer water to water via transferring its heat energy to water in inner tank. Thus potable hot water will be produced.
Cylinder type hot water tank and serpentines in the tanks is coated with immersing to hot galvanize. Thus anode rod is not needed and you save your time and cost for changing anode rod. Due to special coating material heat transfer is faster and heating efficient is high.
You can set desired temperature with adjustable thermostats mounted to sensor holes. When water temperature has achieved desired temperature, thermostat will send a signal then circulation and recirculation pumps will be out off service. Thus it will prevent waste operation.
DTB series boilers have additional heating elements. Thus, especially in summer periods you can provide hot water with electrical supply without using central heating system.
|
|
DTSYB Boilers With Thermal Heat Exchangers
DTSYB and DTSYB-X Series is a single serpentine boiler that prepares hot water by the circulation of Thermal Red Hot Oil or Steam through its serpentine. The serpentine material in this Series is selected accordingly to the fluid, since the fluid to be circulated is oil based or steam. In X series it has an electrical command panel too. It produces hot water by the circulation of Thermal Red Hot Oil/ Steam or by the use of electric energy.
Floor Standing Type
Installation Way; Vertical
Avaliable to connect thermal line(red hot oil, steam, water)
Avaliable to Connect Solar Panel, Central Heating System, Central Heater Tank
Economically, High Efficient
200 - 2000 Liters Capacity Range
Bimetal Thermometer
Pressure Relief P Valve
Temperature Sensor Connection Hole
(Avaliable For Re-Circulation And Closed Line Pump Control)
Glass Wool / Polyurethane (Cfc Free) Insulation
Electrostatic Epoxy Coated Main Body
Drain Tap
Smart Apperance
2 Years Whole Warranty
10 Years Supplying Spare Parts Warranty
Optional Features
Avaliable Additional Heating Elements
Available Additional Electrical Command Panel
Temperature and Pressure T&P Valve
|
|
Eichenauer has introduced and developed an enclosed design in its programm for mediums, which cannot, for specific reasons, come into direct contact with PTC ceramics.
Under these premises, the encapsulation of the PTC elements and the inner heater are warranted.
|
|
Long-chain hydrocarbon compounds (paraffin) begin to breakdown under ambient temperatures below 0°C, which influences fuel dispersancy and adds to the degradation or clogging of the fuel filter.
This problem is heightened with the introduction of higher filtering standards with modern fuel injection technology. Nowadays, electrical heat exchangers are used to ensure higher fuel dispersancy and safe operation in motor vehicles.
|
|
The highly integrated and easy to operate LHS SYSTEM - line leaves no wish unfulfilled. The air heaters can be externally configured and monitored via the Leister-Bus. As with the LHS PREMIUM - line, the temperature probe, temperature controller and power electronics, as well as device and heating-element protection, are also built-in. With the LHS SYSTEM -line and its operating units and interfaces, you know the status of your air heaters at all times.
• Simple installation of the Leister-Bus with standard network cables (RJ45 connectors)
• Temperature steplessly adjustable
• Integrated probe and temperature controller
• Integrated device and heating-element protection with alarm output
• High process reliability
• Small dimensions, big performance
• Compatible with the existing Leister blower and nozzle range
|
|
With their integrated temperature probe, temperature controller and power electronics, the LHS PREMIUM - line devices guarantee a very high level of process reliability. The temperature is steplessly adjustable with the potentiometer. The built-in device and heating element protection ensures that the air heaters are not damaged by excess temperature even under exceptional circumstances. An upgrade to the LHS SYSTEM - line is possible at any time.
• Temperature steplessly adjustable
• Built-in temperature probe
• Fully integrated temperature controller
• Integrated device and heating-element protection with alarm output
• High process reliability
• Small dimensions, big performance
• Upgrade to the LHS SYSTEM-line possible
• Compatible with the existing Leister blower and nozzle range
|
|
The elements are specially shaped so as to obtain the best curtain type exchange surface and are fixed on a stainless steel or steel plate. Fitted with an electrical connection box separate from the plate for uses at temperatures over 120 °C, the batteries may be powered by three-phase supplies up to 750 V.
The heating elements are wired with high temperature cables, generally in busbars mounted on insulators at one or more rates.
Designed to be used at temperatures up to 850 °C, the plates may be mounted on steel or stainless casings to allow their installation on the duct network
Devices can be produced according to ATEX directives.
|
|
DEMK Central System Electrical Heater Tanks
DEMK series is central system electrical heating tanks, which is designed to meet users special request and its power, can be designed to desired rates. Heating operation can be controlled by command panel on tank.
Water temperature can be adjusted by user via digital thermometer on panel cover.
DEMK series; has three different power rates; 60kw, 90kw and 120kw. Serpentine line can be attached for solar collector line or underground heat sources.
Advantages of DEMK series electrical heating tanks
* Leakage or default current breaker,
* Human life safety for contacting electrical equipment,
* Protection and warning system audible and visible for excess temperature rises,
* Reliable temperature limit, room thermostat commanded space temperature control,
* Sensitive setting for desired water or space temperature,
* Protection and warning system audible and visible against operation without water,
* Stepped power usage or if you choose full economical and programmable energy usage model.
|
|
High capacity gear metering unit for the processing of filled and unfilled elastomeres in injection and spreading applications. Variably adjustable mixing ratio with an output capacity of 1 to 8 kg/min., depending on the material.
Separately heated containers with heating double jacket and downdraft heater, continuously adjustable up to 120 °C.
|
|
| ... products without technical information |
| |
SIGMATHERM
Ideal for the pasteurisation prior to sterile packing or storing of beverages and liquid foods such as: juices, beer, milk, sauces, fruit and vegetable purees, tomato paste, jams and jellies, applesauce, egg products.
Process plants with SIGMA plate heat exchangers or SIGMAFLOW heat exchangers for viscous, pasty, pulpy and particulate liquid foods have heat recovery capability up to 96%.
High temperature short time heating systems can be used for the cold packaging of food products in sterile containers via aseptic fillers into packages or barrels.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category
