|
|
|
The world's smallest air heater with integrated heating element protection, device protection and temperature probe LE MINI SENSOR is especially well suited for hot air riveting Sitemap Services Search Leister SPECIFICATIONS Products Process Heat Print Page Plastic Welding News Microsystems Links Leister USA Leister Group Leister China Leister : Plastic Welding, Process Heat, Lasersystems, Microsystems Lasersystems LE MINI Sensor LE MINI Sensor LE MINI SENSOR Kit LE MINI Hot air blower
|
|
|
|
|
|
DESCRIPTION:
Completely autonomous industrial hot air generator with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas) operation.
These equipments operation is that one of heating the environmental air by using the thermal energy produced by the equipment. The produced heat is driven by a centrifugal fan to the premises that must be conditioned.
The combustion products are driven through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are the following ones:
-Heating gas oil operation, natural gas or liquefied petroleum gases.
-Closet made with galvanised sheet covered with polyester dust and dried in the oven at 200ºC.
-Combustion oven designed for obtaining a performance of 90%.
-Electronic control with a viewer of the temperature driven to the premises.
-Environmental thermostat included in the equipment.
-Base equipment prepared for being connected to air distribution pipes. You can ask for a 4-direction air distributor plenum with air directional grids.
-Possibility of coupling a digital time programmer for starting the equipment up and stopping it automatically according to user’s necessities.
|
|
Our SmartHeat® PowerTipsTM technology is designed to address the high thermal demands of lead-free alloys and other high thermal demand applications. In concert with our SmartHeat® technology, we have enhanced both the heater efficiency and thermal transfer characteristics of our tip designs. This allows the soldering tips to deliver a significant increase in thermal performance without resorting to the conventional approach of increasing tip idle temperatures, thereby, providing leading thermal performance, process control and eliminating the risk of thermal damage.
Whether you're using a Metcal soldering system that you have had for years, or a new model OK International system, all of these units are relevant for lead-free and have a range of SmartHeat® PowerTipsTM available. Using SmartHeat® PowerTipsTM means changing to lead-free can be cost effective and doesn't necessarily require replacing soldering systems.
|
|
|
|
|
|
DESCRIPTION:
Hot air generators for carrying out drying processes at a low temperature.
There are two products ranges: MM-H and MM-HR
MM-H SERIES
Specially conceived for drying processes in which a big air volume and a thermal difference not superior to approximately 30ºC is needed.
MM-HR SERIES
It is similar to MM-H series, but the air aspiration is placed on the opposite site of the air outlet.
The equipments can be made in 3 positions according to the installation that must be carried out.
The main features are:
-Heating gas oil, natural gas or liquefied petroleum gases operation.
-Combustion oven with a performance of 90%
-Centrifugal fans statically and dynamically calibrated for their proper operation.
-Tubular structure painted with black-coloured priming.
-Insulated sandwich panels painted in the oven with RAL 7035 grey colour.
-Working thermostat and security thermostat or limiter.
-Electric panel according to European rules.
-Fastening hooks for an easy transport.
-Base equipment prepared for being connected to air distribution pipes.
|
|
|
|
|
|
AIR GENERATOR FOR SWIMMING POOLS "POOL MANN"
PM-050 / PM-100
DESCRIPTION:
Completely autonomous hot air generator designed for conditioning covered swimming pools. This equipment can operate with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas).
These equipments function is to heat environmental air inside the premises by means of the thermal energy produced by the equipment.
The produced heat is driven to the premises that must be conditioned by means of a centrifugal fan.
The combustion products are extracted through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are as following:
-Heating gas oil, natural gas or liquefied petroleum gases operation.
-Cupboard made with galvanised sheet covered with polyester dust dried in the oven at 200ºC.
-Combustion oven designed for obtaining a performance of 90%.
-Three-speed centrifugal fan.
-Electronic control with a display of the temperature driven to the premises.
-Environmental thermostat incorporated in the equipment.
-Air impulsion in elbow shape at 90º with double deflection grid incorporated on it.
-It incorporates a digital time-programmer for starting-up and stopping automatically the equipment.
|
|
|
|
|
|
WALL HOT AIR GENERATOR "GS"
GS-060
DESCRIPTION:
Farming hot air generator completely autonomous with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas) operation.
These equipments function is that one of heating the environmental air by means of the thermal energy produced by the equipment.
The produced heat is driven to the premises that must be conditioned by means of two centrifugal fans.
The combustion products are extracted through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are the following ones:
-Heating gas oil, natural gas or liquefied petroleum gases operation.
-Closet made with galvanised sheet, covered with polyester dust and dried in the oven at 200ºC.
-Combustion oven designed for obtaining a performance of 92%.
-Electronic control with a display of the temperature driven to the premises.
-Environmental thermostat with a five-meter hose included in the equipment.
-Double deflection air impulsion grid.
-There is the possibility of coupling a digital time-programmer in order to start the equipment up and stop it automatically according to users’ necessities.
|
|
|
Hot air stove with operation to pellet. Totally automatic and ecological stove since its funcionamento is with small pressed wood cylinders calls pellet. Its quality of finished and to quiet operation sun some of its main virtues.
|
|
Gökser Machine Ltd has been carrying out activities in the field of portable heating sets with burner since its foundation in 1987. Heaters can be used safely in every place needs to be heated by clean and hot air.
Each model is donated with heating function in various calories and capacities. It can realize hot air transfer to places where hot air is required, thanks to the flexible heat resistant duct. Heaters are operating full automatically flame control system.
|
|
-The Air Process heater will provide hot air and gas up to 1000°F (540°C) with infinite control by varying the voltage and air velocity supplied. Units are fitted with a tubing "T" for convenient power lead outlet, while larger diameters can be supplied with post terminals on the sheath for direct electrical connections.
-For easier installation, Hotwatt can supply male or female NPT threaded fittings, hose adaptors, flanges, or custom fittings to your specifications.
Applications: Baking, Drying, Laminating, Metal Working, Packaging, Plastic Welding, Preheating, Sealing, Soldering, Shrink Fitting, Synthetic Fabric Sewing.
|
|
ENERGY RECOVERY HOT AIR GENERATOR
SPECIALLY IT IS DESIGNED TO BURN CRANKSHAFT OIL AND DUST OIL
OIL AND GAS RANGES ARE POSSIBLE
CAPACITY STARTS FROM 50 KW UP TO 150 KW
EXCELLENT FURNACE SYSTEM
MAIN APPLICATION AREAS ARE AUTOMOBILE SERVICE, POULTRY FARMS, GREENHOUSE, GYM ETC.
Production as per DIN 4787-4788 and European standards
CE and other certificates
- Low emission values
- Silent operation
- Superior Design
- High efficiency
- High technology
|
|
ECOSTAR MOBILE HOT AIR GENERATORS
Production as per DIN 4787-4788 and European standards
CE and other certificates
- Low emission values
- Silent operation
- Superior Design
- High efficiency
- High technology
|
|
Hot gas generators
Hot gas generators fabricated by Unitherm Cemcon are designed for direct air heating performed by a firing system. Air to be heated is either supplied by a dilution air fan or is delivered from process with high or low temperatures or combinations of both.
Fuels:
- Coal
- Pectoke
- Fuel Oil
- Fuel Gas
Unitherm Cemcon provides:
-Hot gas generator engineering for supply or local manufacturing
brick lining material
-Burner (mono block or special designs) incl. operation valve train and fuel supply system
-Diluton air fan
-HGG field instruments for performance and safety control
-HGG control cubicle
|
|
The highly integrated and easy to operate LHS SYSTEM - line leaves no wish unfulfilled. The air heaters can be externally configured and monitored via the Leister-Bus. As with the LHS PREMIUM - line, the temperature probe, temperature controller and power electronics, as well as device and heating-element protection, are also built-in. With the LHS SYSTEM -line and its operating units and interfaces, you know the status of your air heaters at all times.
• Simple installation of the Leister-Bus with standard network cables (RJ45 connectors)
• Temperature steplessly adjustable
• Integrated probe and temperature controller
• Integrated device and heating-element protection with alarm output
• High process reliability
• Small dimensions, big performance
• Compatible with the existing Leister blower and nozzle range
|
|
With their integrated temperature probe, temperature controller and power electronics, the LHS PREMIUM - line devices guarantee a very high level of process reliability. The temperature is steplessly adjustable with the potentiometer. The built-in device and heating element protection ensures that the air heaters are not damaged by excess temperature even under exceptional circumstances. An upgrade to the LHS SYSTEM - line is possible at any time.
• Temperature steplessly adjustable
• Built-in temperature probe
• Fully integrated temperature controller
• Integrated device and heating-element protection with alarm output
• High process reliability
• Small dimensions, big performance
• Upgrade to the LHS SYSTEM-line possible
• Compatible with the existing Leister blower and nozzle range
|
|
The world’s smallest air heater with integrated temperature probe. The LE MINI is especially well suited for hot-air riveting or for applications in which heat has to be applied with pinpoint accuracy.
It is easy to fit even in the most confined spaces. The device can be used with air pressure of up to 0.2 MPa (2 bar). Two models and two power versions are available for selection – with or without sensor, and in 400 or 800 watt power classes.
• Extremely compact, robust built-in device
• Integrated device protection with alarm output
• Integrated temperature probe (LE MINI SENSOR)
• Integrated heating element protection (LE MINI SENSOR)
• Analogue interface to temperatur controller (LE MINI SENSOR)
|
|
The air heater model 3000-E is available in two versions: as switching device with 3 heating stages with 230 V AC and as electronic design with infinitely variable temperature setting with 230 V AC or 400 V RC.
The heat output amounts to 3000 W and reaches a maximum temperature of 700 °C.
The air heater model 3000-E is connected to an external air supply and is therefore suited for continuous operation. Air heaters are mounted on conveyor belts and in machines. In addition, they are used in heating ducts and on different types of appliances.
If required, the air discharge can be changed by means of different slip-on nozzles.
|
|
Due to its sturdy and compact design, the powerful air heater model 7500 is suitable for installation in machines, appliances, heating ducts and on conveyor belts.
The heat output of optionally 5000 W, 7500 W or 10000 W is electronically controlled and infinitely variable. If desired, the air heater can also be supplied without electronic system. The maximum temperature amounts to 700 °C.
As all our air heaters, model 7500 tool is operated with an external air supply and is therefore virtually maintenance free and suitable for continuous operation.
With wide slot nozzles of up to 300 mm width, the air discharge can be scattered, centred and adapted to individual applications.
|
|
The air heaters model 3000 and model 5000 can be put to numerous different uses, for example on conveyor belts and in machines. The hot air they generate is used for activating, shrinking, drying and shaping.
The air heaters are switchable in 3 stages and can be equipped with different heat outputs with 230 V or 400 V RC offering up to maximum 650 °C.
Models 3000 and 5000 require an external air supply by means of fan, side channel blower or compressor. The required air flow amounts to 500 to 1500 litre/minute, depending on the nozzle.
It is possible to concentrate and change the air flow by means of different slip-on nozzles so that individual solutions can be created.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category :