|
|
Over-the-Side Immersion Heater - L / LC
Straight (L) and circular heating element bundles (LC) available. Moisture Resistant and Explosionproof enclosures.
|
|
The InteliHeat flexible heating jacket for IBC's and totes is ATEX and IECEx certified for use in potentially explosive atmospheres.
Constructed with patented technology using carbon rich semi-conducting heating membranes, safe operating conditions are maintained even in the presence of potentially explosive gases.
Heating rates are similar or better than our standard "safe area" IBC2 high power flexible jackets, and temperatures up to typically 70C can be achieved due to the high density insulation layers incorporated as standard.
No transformers are required as the unit operates from standard 220/240v supply.
This unique product is highly cost effective for heating IBC's in any Zoned area, and can be moved from container to container or kept in place whilst the container itself is moved. Therefore the user can avoid using expensive and space constraining ovens, and minimise heat loss at point of use.
|
|
Fast and highly energy efficient electrical heating of individual and multiple drums and containers.
If you are considering a bulky and fixed installation oven, then you should also evaluate our value for money and easy to use flexible jackets.
We manufacture heating jackets for single and multiple drums - our 1000 litre size (IBC) jacket with insulated lid is designed to fit around a pallet with four drums, so products can be heated anywhere.
Available for standard industrial applications and also with EX certification for ATEX and IECEx areas.
Custom sizes made to order.
Our Rigid THERMOSAFE Drum Heater can be linked with our FARATHERM or DIGIHEAT Base Heaters and our Insulated Lid to create a powerful mini-oven for fast melting of solids from steel drums.
|
|
| ... products without technical information |
| |
TURBO 24/36
The T24 and T36 are Graymills most economical total immersion cleaners and are offered in both solvent and aqueous (heated) versions
STANDARD FEATURES
* Total parts immersion provides hands-off cleaning without operator involvement
* Grid platform supports parts above bottom - allows for all sides of parts to be exposed to cleaning solution
* "V" shaped tank bottom with two inch center drain for easy cleaning and fluid change outs
* Turbo-action units scour and flush parts clean with a pump that provides 3000 GPH
* Multiple tank sizes up to 118 gallon capacity
* Solvent or aqueous models available; some models can be field-retrofit and converted to aqueous versions if cleaning method changes
* Fusible safety link closes lid in event of a fire
* Energy saving insulation and stainless steel lined lids (aqueous only)
* Refer to voltage options for additional details on wiring options
|
|
CLEAN-O-MATIC 902-A
Dual pump version of the Model 900 includes two Hydro-Jet manifolds to deliver the most internal fluid agitation available for the Clean-O-Matic series.
STANDARD FEATURES
* 49"L x 28-1/2"W x 33-3/8"H work space
* 50-117 gallon capacity
* Pump with Hydro-Jet manifold provides active in-tank fluid agitation
* Two 1/3 HP Graymills Superflo pumps, 2400 GPH each, provide aggressive in-tank fluid agitation through dual Hydro-Jet manifolds operating independently or together
|
|
HAMO KG
Cleaning System for Containers
Wash chamber 1000-1200/1300-2000/1700-2900 mm (39.37-47.24/51.18-86.61/66.93-114.17 inches) (W/H/D).
The economical system for cleaning, drying.
The HAMO KG was developed specifically for industrial areas. The machine is designed for cleaning the following parts:
* large parts with dimension as of 1000/1000/1000 mm (39.37/39.37/39.37 inches) (W/H/D)
|
|
Baskets HAMO LS-2000
HAMO offers you a wide range of racks for cleaning glassware, containers, instruments and AN-equipment
HAMO DW
Cleaning, Disinfecting and Drying System
Wash chamber 1000/2000/1600-2700 mm (39.97/78.37/63.00-106.30 inches) (W/H/D).
The economical machine for cleaning, disinfecting of beds, OP-tables, conveyors, containers.
Highest Demands for Cleaning and Disinfection in Hospitals
|
|
| ... products without technical information |
| |
Hydraulic compensator
Generally mounted inside hydraulic tanks and operating with no energy source, these products compensate the variations in volume of oil or any other fluid caused by changes in temperature or volume, whilst avoiding all risk of accident for the equipment.
PRONAL compensators also ensure that tanks are completely leakproof and protect any hydraulic fluids from external pollution by means of a totally flexible membrane which isolates them from the ambient environment. They can also act as hydraulic dampers.
Advantages :
- suitable for all types of hydraulic circuit,
- prevents air emulsifying in the oil,
- leakproof hydraulic circuits,
- pressurisation of the tanks,
- maintenance-free and very long service life
A highly diversified range of products :
- capacities vary between 0.1 and 10,000 litres,
- standard and customized range with a wide choice of solutions offering hydraulic protection.
|
|
| ... products without technical information |
| |
The OMVE MPV range
The OMVE Multi-Purpose Process Vessels are an essential part of a continuous flow process or a batch process. The MPV-range can be adapted to specific requirements based on the process and the products that have to be processed. Specific requirements can also be integrated.
The multi-purpose process vessels are available in 10, 25, 50 or 100 litres. Larger vessels are available on request.
All vessels are mounted on a mobile skid inclusive the instruments and controls.
The OMVE MPV vessels are suitable to use for:
- Mixing and Blending
- Desolving powders in liquid
- Aseptic) Buffering
- Fermentation
- Heat Treatment
- Deaeration / Degassing
|
|
Process Vessels
Our fabricators are capable of building vessels, heat exchangers, and systems to almost any specification and to the major standards such as ASME, ANSI, DIN, JIS, and KS. They have manufactured vessels and systems for major corporations around the world
|
|
process vessel
Preparation vessels for injectable solutions, eye-drops, syrups and other liquids with active principles in solution or dispersion
Manufacturing in compliance with the most rigorous cGMP guidelines for pharmaceutical processes.
Design: flanged, welded, hinged, liftable cover.
Stainless steel outer panelling, welded, tank-in-tank type.
Crevice-free execution, with mirror polishing of the surfaces where possible.
Wide range of agitators to meet customer%u2019s process needs:
- propeller type agitator
- disperser-homogenizer
- disperser
- anchor-type agitator
- magnetically entrained agitator
Membrane-type sanitary valves installed on the process side
Membrane-type discharge valve, zero dead lag
|
|
The Murzan TUS-50 is the ideal solution for emptying up to 300 gallon containers of highly viscous, and/or heavy materials, applications which no pump alone can handle. This system quickly empties and cleans TOMATO PASTE containers without putting any pressure on the product or the container.
Advantages
* EASY TO CLEAN
* Empties 300 gallons of the heaviest and most viscous products, such as 33° Brix Tomato Paste in less than 12 minutes without adding any water, offering perfect control of the Tomato Paste Unloading
* USDA Listed
* Ability to run dry
* Maintains integrity of product
* Designed for CIP capability
* Metering capabilities
* Totally automatic
Applications
* Tomato Paste Concentrate
* Chocolate and Vanilla Fudge
* Fruit Concentrates
* Other viscous products
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
