|
|
|
Larox Flowsys Oy is manufacturing reliable and functional pinch valves to process industries worldwide. Larox valves are well suited for shut-off and control applications involving abrasive or corrosive slurries, powders or any other types of materials that can lead to packing and hardening at the valve. Various sleeve, actuator and valve body materials are available to handle a wide range of fluids and materials. The standard range of Larox Valve solutions is for diameters 25 mm - 1000 mm, temperatures -50 C - +160 C, and pressures 0 - 100 bar.
|
|
|
These calibration manifolds are having one isolating valve of 1/2" connection & one dain valve of 1/4" NPTF out let which can be used for calibration. Compcat unit saves space, reduces number of joints resulting in cost reduction. Used with pressure gauges, pressure switches & transmitters. Different options as shown below are available.
|
|
Application
- as cartridge
- as modular valve
Shut-off valves are used for manually
opening and closing a channel. They
can also be used as drainage valves
against the tank line.
Shut-off valves are suitable for bidirectional
flow.
|
|
* A complete valves catalog :
– Needle valve (manual or pneumatic)
– Ball valve (Spheric, manual, pneumatic and electric)
* A fitting range :
– Adapter mâle/femelle, mâle/mâle and union
– Coupling
– Tee, Elbow, cross
* A large choice of tubing 316 SS and 304 SS :
– Tubing section 1/4 , 5/16 , 3/8 , 9/16 , 1
– Nipple section 1/4 , 5/16 , 3/8 , 9/16 , 1
* A lot of accessories :
– Pressure gauges, pressostat, relief valve
– High pressure flexibles, rupture discs...
|
|
| ... products without technical information |
| |
Positive constant displacement, rotary, three screw pump. Flow rate per revolution 9.8 - 307 cm3 in 14 steps. The three screws, the central driven screw – the power rotor – which meshes with the two sealing screws – the idler rotors –
are the only rotating components ot the pump. The axial pressure and friction loads on the pump rotors are hydraulically balanced. The power rotor is positioned axially by the selfcompensated thrust washer arrangement, being part of the hydraulic balancing system of the power rotor. The pump accommodates mechanical shaft seals complying with the DIN 24960 Standard.
|
|
The ACG pumps are used for a number of different fluids:
Lubrication oil, fuel oil, vegetable oil, hydraulic oil and other hydraulic uids, glycol, polymers, emulsions, and any non-aggressive fluid with sufficient lubricating properties.
When so required the ACG pump may be certied according to any of following classification societies: DNV, BV, LRS, ABS, RS, GL, RINA, KR, NK or CCS.
Typical applications are:
• Lubrication of diesel engines, gears, gas and steam turbines, hydro tur bines and paper machines.
• Circulation for cooling and ltration in large machineries, hy drau lic systems and transformer oil for insulation in transformers.
• Transfer onboard ships, in oil factories, refineries,tank farms etc.
• Fuel supply duties for diesel engines.
|
|
The Std Line (standard) ACE pumps come in two executions; Lube Line and Fuel Line. The main differens is the shaft seal design, optimized for light duty and heavy duty respectivly. The pumps are used for handling non-aggressive fluid with sufficient lubricating properties.
When so required the Std Line ACE pump may be certified according to any of following classification societies: DnV, BV, LRS, ABS, RS, GL, RINA, KR, NK or CCS.
Typical applications are:
• Lubrication of diesel engines, gears, gas and steam turbines, hydro turbines and paper machines.
• Circulation for cooling and filtration in large machineries, hydraulic systems and transformer oil for insulation in transformers.
• Transfer onboard ships, in oil factories, refineries, tank farms etc.
• Fuel supply duties for diesel engines.
|
|
The ACD pumps are used for a number of different fluids:
Lubrication oil, fuel oil, vegetable oil, hydraulic oil and other hydraulic fluids,
glycols, polymers, emulsions, and any nonaggressive fluid with some lubricating
properties.
Typical application are:
• Lubrication of diesel engines, gears, gas and steam turbines, hydro turbines, paper machines.
• Circulation for cooling and filtration in large machineries and hydraulic systems,
pumping transformer oil for insulation in transformers.
• Transfer onboard ships, in oil factories, refineries, tank farms etc.
|
|
The ACE pumps are used for a number of different fluids:
Lubrication oil, fuel oil, vegetable oil, hydraulic oil and other hydraulic fluids, glycol, polymers, emulsions, and any non-aggressive fluid with sufficient lubricating properties.
When so required the ACE pump may be certified according to any of following classification societies: DNV, BV, LRS, ABS, RS, GL, RINA, KR, NK or CCS.
Typical applications are:
• Lubrication of diesel engines, gears, gas and steam turbines, hydro turbines and paper machines.
• Circulation for cooling and filtration in large machineries, hydraulic systems and transformer oil for insulation in transformers.
• Transfer onboard ships, in oil factories, refineries, tank farms etc.
• Fuel supply duties for diesel engines.
|
|
Completely equipped standard power units
basic power units with directional control valves as per customer's requirements
with gear pumps or radial piston pumps
with 3-phase AC-motor 0.75 up to 7.5 kW - 400 VAC
with programmable control, electric control or terminal box
oil volume of the reservoir 5 to 63 litres
operating pressures 50 up to 500 bar
flow rate 0.82 up to 24 l/min
|
|
|
This pump, electric-driven, is compact and light in weight, enabling work to be carried out at locations that are difficult to access.
|
|
Hydraulic electric pump - can be combined with our GKS-jacks!
Coupled by means of sealed quick release connectors, joined with hose couplings. Safe operation guaranteed by synchronous lifting and lowering at two or four positions using the pump. Reliable functionality, as the one-man operation separate pumps serve to ensure that individual jacks are not overloaded.
Coupled by means of sealed quick release connectors, joined with hose couplings.
Equipment: 2/2 directional control valve for single acting cylinder, pressure gauge remote control cable 3m, 2x2m hose with two couplings.
Optional: two-fold or four-fold distributor cabinet with shut-off valves, hose extentions and other accessories available on request.
|
|
Hydraulic hand pumps
For loads, which cannot be lifted at the front face, or where the load capacity is to be doubled a simple formula can be used:
pump + 2 jacks = 1 jack-SET
In other words:
The separate hydraulic hand pump make up one jack SET with two or four machine jacks.
|
|
|
The Universal Mag Drive is the ideal sealing technology for critical liquid containment applications within Viking’s Universal Seal product line. It is dimensionally interchangeable with Viking's Heavy Duty bracketed and Universal Seal pumps, allowing for easy upgrade from packed or mechanical seals to sealless technology. The Universal Mag Drive’s hermetic, static sealed canister provides the highest level of liquid containment available by eliminating traditional dynamic shaft seals. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications requiring continuous duty at pressures up to 200 PSI (14 Bar).
|
|
|
Viking Mag Drive® sealless internal and external gear pumps eliminate leakage and maintenance associated with shaft seals. For use with all hazardous/toxic fluids, hard-to-seal liquids and for 24/7 operations which cannot afford unscheduled downtime due to seal failure. Some models allow reversible direction of flow, and temporary run-dry capability. May be close-coupled to IEC or NEMA motors, or long-coupled with optional bearing carrier. ATEX conformity available.
|
|
|
|
|
|
|
The CMD series is a groundbreaking new series of sealless, non-metallic pumps specially designed for crucial liquid containment applications. This series offers several important benefits, including: 100% renewable performance with use of Viking’s recommended spare parts kit; an innovative magnet system with a patent-pending spline design that allows the magnet to self-align while floating on the shaft with no added fasteners; self-lubricating, heavy-duty bearings with patent-bearing geometry that allow dry-run capabilities; and, a unique, universal flange that allows for easy installation for both ANSI and DIN flanged systems, among other key benefits. In addition, the CMD series offers extreme flexibility, including an array of models with port sizes ranging from .25” to 1.5” (6.35 to 38.1 mm), a performance level of 100 SSU (22 cSt), normal capacity at 1450 RPM ranging from 0.34 to 30 GPM (1.3 to 120.0 LPM), normal capacity at 1750 RPM ranging from 0.4 to 33.0 GPM (1.5 to 125.0 LPM), a maximum differential pressure of 150 PSI (10 Bar), a maximum hydrostatic pressure of 200 PSI (14 Bar), approximate shipping weights ranging from 4 to 44 pounds (2 to 20 kg), and a maximum recommended operating temperature of 150°F (65°C).
|
|
General
Magnetic coupled DICKOW-Pumps of series NMB/NML are of sealless design.
The containment shell forms a closed system with hermetically sealed liquid end.
Applications
Magnetic driven NM-pumps are designed to improve plant and personnel safety, especially when handling toxic, explosive or other dangerous liquids which react on contact with the atmosphere. For all these services the containment shell replaces double acting mechanical seals with external fluid reservoirs and the necessary control equipment. NM-pumps therefore offer exceptional benefits to the chemical, petrochemical and allied industries and fulfill all environment protection regulations.
Maximum operating temperature 240°C (465°F) for the standard NMB/NML-type. The NMW-design with no internal circulation and dead-ended magnet end allows temperatures up to 350°C (660°F). The maximum allowable working pressure is 25 bar (364 psi).
|
|
|
Priority Type Flow Dividers split a single input flow into a ‘Priority’ (regulated) flow and a ‘By-Pass’ (excess) flow which can be returned directly to the oil reservoir or used to power a second system. In many instances this dispenses with the need for another pump to operate a second system.
|
|
| ... products without technical information |
| |
Split body floating ball valve
ND (nominal diameter): 4-200
other diameters or pressures under request
NP (nominal pressure): 6-160
MAIN TECHNICALS SPECIFICATIONS
Execution : A105, AISI 316, ISO, ANSI 515.
Can have risen with any types of actuators
Connection of actuators following one ISO 5211
Anti-statique
Management of the fluid in both senses
Technology: Forged
Principle: 2 pièces
|
|
Trunnion ball valve
ND (nominal diameter): 25-800
other diameters or pressures under request
NP (nominal pressure): 6-420
MAIN TECHNICALS SPECIFICATIONS
Execution : A105 or 316L
Double floating seats
Sets of table linen anti-blow of ram and replaceable
Three gaskets
Anti-statique
Anti-feu according to standard API 6 FA / API 607 / BS6755
Traffic of the fluid in both senses
Technology: Molded or Forged
Principle: Sphère arbrée
|
|
2-PC HIGH PRESSURE BALL VALVE
RATING: 6000 WOG/ PN414
FULL BORE, THREADED END
SS316/ SS304/ WCB BODY
WITH/ WITHOUT MOUNTING PAD ISO5211
|
|
3-PC HIGH PRESSURE BALL VALVE
RATING: 3000WOG/ 200BAR
2000WOG/ 130BAR
FULL/ REDUCED BORE
S.S.316/ S.S.304/ WCB BODY
THREADED/ SOCKET/ BUTT WELD
WITH/ WITHOUT API 607 FIRE SAFE
NORMAL/ DIRECT MOUNTING PAD ISO5211
|
|
General
Magnetic coupled DICKOW-Pumps of series NMB/NML are of sealless design.
The containment shell forms a closed system with hermetically sealed liquid end.
Applications
Magnetic driven NM-pumps are designed to improve plant and personnel safety, especially when handling toxic, explosive or other dangerous liquids which react on contact with the atmosphere. For all these services the containment shell replaces double acting mechanical seals with external fluid reservoirs and the necessary control equipment. NM-pumps therefore offer exceptional benefits to the chemical, petrochemical and allied industries and fulfill all environment protection regulations.
Maximum operating temperature 240°C (465°F) for the standard NMB/NML-type. The NMW-design with no internal circulation and dead-ended magnet end allows temperatures up to 350°C (660°F). The maximum allowable working pressure is 25 bar (364 psi).
|
|
|
|
|
|
General
Dickow-pumps of series HZMR are sealless multistage horizontal centrifugal pumps, driven by a synchronous permanent magnetic coupling.
The containment shell is sealed by a confined gasket and separates the pumped liquid from the atmosphere. There are no leakage endangered dynamical shaft sealings available.
Due to the fact that 90% of pump failures are caused by leaking shaft seals, the sealless design increases the availability and reduces maintenance costs.
Field of application
HZMR-pumps are used in services where no seal leakage can be tolerated, when handling toxic, explosive and pollutive liquids and when the required differential heads are above the application range of single stage volute casing pumps.
The HZMR-pumps operate almost maintenance free, the service life is far longer than that of pumps with conventional mechanical seals.
The performance range covers capacities up to 200m3/h (880 USgpm) and differential heads up to 350mLC (1148 ft). The maximum operating temperature is approx. 200°C (392°F), allowable operating pressure is 40 bar.
|
|
Honda High Pressure pumps offer high pressure with lower flow. The best applications for these water pumps are where higher pressure is required, such as when using sprinklers or a nozzle.
WH15
This high pressure pump is powered by the GX120 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
WH20
This high pressure pump is powered by the GX160 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
|
|
|
|
see the results for the following category : 
