|
|
- Model / code: V134
- Category: Pneumatically Operated Valve
- Body Material: Aluminium bronze stainless steel
- Inlet Pressure: 400 bar; 280 bar
- Connections: 1/4 " BSPP
- Valve Size: 4,2 and 3,2 mm
- Function: 2/2 and 3/2 normally closed / normally open; universal
- Pilot Pressure: 5 to 7 bar
|
|
SPECIFICATION
PORT SIZE(PT,NPT): 1/4"
ADJ.PRESSURE RANGE(kgf/cm2): 0.5~35
PROOF PRESSURE(kgf/cm2): 40
AMBIENT TEMP: 5-60 C
GAUGE PORT(PT, NPT): 1/8"
|
|
Specs: DN20-150, 1"-6"
Standard: DIN, SMS, ISO
Material: SUS304, SUS316L
Applications: beer, Dairy Industry, beverages, pharmaceutical
|
|
Size Range ...................... 1/2 "- 4" (DN15 - DN100)
Design ............................. Single Body Construction (SBC) with reduced number of body seals
Service ............................ Gas, Steam, Chemicals
Pressure Range ............ ANSI Class 150 to 1500
Temperature Range ..... -40°C to 250°C (-40°F to 480°F)
Materials ......................... Carbon Steel, Stainless Steel and Exotic Alloys
End Connections............ Screwed, Socket & Butt weld, Flanged & RTJ
Standards........................ Firesafe to API 607 4th Edt. and BS 6755 Pt 2
Operation ........................ Manual, Actuated and Coupled Actuation
|
|
|
|
|
|
VORTEX® IRIS VALVE
The patented Vortex® Iris Valve is designed specifically to handle dry bulk solids in gravity discharge of free-flowing material from bins, bulk bags, chutes, and hoppers.
Traditional iris valves rely on plastic components to actuate the valve that can easily break during use. The Vortex® Iris Valve is designed with stainless steel control rings and metal trigger locks and handles to eliminate these problems, enabling you to meet your objectives by increasing production, while decreasing labor and equipment costs.
Valve Specifications
- Size/Bore Options: 50mm, 75mm, 100mm, 125mm, 150mm, Diameters
- Media: Powder, Pellets, Granulars
- Connection Options: Flanged, Tube Stub, or Ferrule Couplings
- Media Temperature: 100°C continuous to 120° C intermittent service.
- Media Pressure: 0.1 MPa, Gravity Only
- Metal Construction Options: 304 or 316L Stainless Steel, and/or Aluminum
- Sleeve Material Options: Nylon, Teflon, Urethane, or Rubber
- Drive/Actuation Options: Infinite Position Hand Lever or Quick Lock Hand Lever
- Position Detection: Visual
- Compliance/Approvals: CE, FDA
- Industry Use: Plastics, Petrochem, Chemicals, Foods, Minerals, Textiles, Agriculture
|
|
|
Red Valve Pinch Valves are able to outlast conventional metal valve designs because of the unmatched abrasion resistance of our elastomer sleeves. The sleeve is the heart of every Pinch Valve, providing the valve lining, flange gaskets, and seating surface all in one. Since the sleeve is the only wetted part of the valve, there is no need for expensive metal alloys to be used in the body of the valve. This design also eliminates fugitive emissions, and the packing and seats that are responsible for most valve maintenance. And since the sleeve is the only wetted part, it is also the only replacement part. The sleeve is constructed much like a heavy-duty truck tire, with bias-ply, fabric-reinforced rubber providing the structural support of the sleeve.
|
|
M2s
Proportional Pneumatic Control Valve
The M2s is an instrument-grade, proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
Automatic recirculation valves (sometimes referred to as pump or minimum flow recirculation valves) are used to ensure the protection of centrifugal pumps during low load operation. This prevents the pumps from running dry and is therefore ideal for boiler feeding, pump start up, or water cooling plants.
The performance of the unique SchuF design has been perfected through simulation and joint research and development with the universities of Magdeburg and Darmstadt.
|
|
Free flow balancing valve, threaded model from Ø 1/2" to Ø 2" manufactured on brass series PN 25, flanged model from DN 65 to DN 300 manufactured on cast iron series PN 16, with piezometric inlets.
|
|
|
Streamlined flow valves, inside and outside screw with bellows, maintenance free, manufactured of grey cast iron PN 16, nodular cast iron PN 16-25, carbon steel and stainless steel PN40.
|
|
SchuF is the inventor of the Piston Bottom Outlet category of valves (Patents received in 1923 and 1926). They are widely used in the Petrochemical, Pharmaceutical, Fine Chemicals, Biochemical, Coal, and Aluminium industries.
The valves are most commonly used for the dead space free draining and feeding of vessels, reactors and pipelines. They are particularly suited to applications that require quick vessel drainage, or where crystals can form.
|
|
The unique ELEVENT® valve design with deep-drawn full stainless steel metal housing, modular assembly as well as interchangeable components offers an optimised protection for low pressure applications.
The set pressures range from 2 mbar to 200 mbar. The ELEVENT® provides advanced seal technology and extreme stability despite low weight. The uncomplicated assembly of the valve and the very easy disassembly by means of clamp body connections are additional path-finding features of the ELEVENT®.
The optimised “air cushion“ sealing principle provides a smooth valve stroke and re-seating during operation and prevents from valve flutter and wear.
Installation and storage costs are reduced to a minimum and costs for maintenance and inspection have never been lower!
|
|
Disc Bottom Outlet Valves are widely used in the Chemical, Petrochemical, Pharmaceutical and related industries. They are used to drain vessels, tanks and pipelines. Invented by SchuF in 1923, they are today available as a disc rising and disc lowering variants. Disc valves have a shorter lenght than Piston or Ram valves and are therefore ideal where space is limited or weight is a concern.
SchuF Disc Bottom Outlet valves are available with many options including:
Dead space free fitting, Crust breaking, Disk grinding, CIP - clean in place, GMP, integrated sampling and flushing, fire safe and many different types of materials and sealing arrangements.
Disc Bottom Outlet valves are available from 1" to 18" as standard with 54°, 60° or 90° outlet angle.
|
|
Common Stainless Steel types like AISI-304 or AISI-316 are not suitable for working under high corrosive environments. Therefore, the equipment requires exotic alloys components to minimise maintenance costs caused by corrosion .
Among the wide range of alloys existing, TECVAL has selected those considered by our customers as most suitable, which we stock to ensure a quick and effective supply.
AISI-316Ti (1.4571)
AISI-904L (1.4539)
Duplex (1.4462)
SuperDuplex (1.4410)
254-SMO (1.4547)
Titanium Gr.2 (1.7864)
Hastelloy C-276 (2.4819)
|
|
The W70 offers an economical solution to a wide variety of mix proof processing applications. Flow of two different media through the same valve simultaneously, without the potential for mixing, provides increased operating efficiencies and significant production cost savings.
- 1½" through 4" tube size
- 150 p.s.i. product pressure rating
- Sturdy, machined spherical bodies. One piece or two piece body construction available.
- Elongated center to face body dimensions for easy manifolding
- Tee or cross configurations; "S" line, "I" line or butt-weld port connections
- Tri-Ring FKM (Fluoroelastomer) or EPDM seats
- Micro switches or proximity switches; with or without solenoid valve
|
|
|
|
|
|
Many industrial applications require very robust valves which are resistant to thermal shocks and dusty or damp conditions.
They must be able to transport liquids such as steam of more or less good quality, high pressure hot water, hot or cold liquids, corrosive liquids, inert gasses or the vacuum.
Application sectors involved:
- rubber vulcanization
- dry cleaning and industrial cleaning
- iron and steel
- sugar
- boilers
The new 298/398 range with its stainless steel body, has all the qualities that these industries require.
- a resistance of 2 million cycles of saturated steam
- a working pressure up to 40 bar
- a bidirectionnel passage
- anti-pressure surge by design
- a large operating pressure range from 1 to 10 bar
- use of noble materials in order to work with liquids with temperatures from - 10 to more than 250°C and in atmospheres with temperatures from - 25 up to 180°C.
Thanks to its water and dust protection system, the valve when mounted in any position may be placed on the outside.
Robust but also highly effective, the 298/398 range is equipped with the latest technological advances which markedly increase its reliability (new generation valve).
|
|
Slide Valve (Pictured)
Slide Valve and Lock-Out Slide Valves
In the open position, slide valves allow air to flow through to downstream equipment in the open position. When in closed position, the valve shuts off the air from the compressor. Air trapped on the load side is then bled off into the atmosphere, preventing equipment from unexpectedly cycling even though the line is "shut off".
The lockout slide valves can be locked in the close position. This is an especially important feature when equipment or machinery is being worked on because it avoids accidental start up, which can cause injury to personnel. The lockout slide valve can accomodate standard lock shank sizes up to .145" (sold separately).
Other types of Valves that Coilhose Pneumatics offers:
Ball Valves
Safety Excess Flow Check Valve
|
|
Handwheel or air cylinder actuation
* Heavy duty construction
* Adjustable packing gland type seals around the 4 sides of the slide
* Zero or minimum maintenance
* Square or rectangular flanges
* Temperature up to 500°C
* Version in accordance with ATEX 94/9/EC
* Customized solutions
Application: Shutoff and dust-tight valve for powders on outlets of silos and hoppers where a robust and reliable valve is required
|
|
Festo’s Tiger Classic valve series has proven itself millions of times - it’s robust and reliable, even under extreme conditions. A valve for many applications, and a comprehensive range of options.
Flow rate
G1/8: 500 l/min.
G1/4: 800 l/min.
G1/2: 3700 l/min.
G3/4: 7500 l/min.
JMFH, MFH: without solenoid coil and plug socket (F solenoid coil)
Voltages
- 12 ... 48 V DC
- 24 ... 240 V AC/50 ... 60 Hz
- Explosion protection Variants
3/2-way valves
- Normally closed or normally open
5/2-way valves
- Single solenoid with mechanical or pneumatic spring return
- Double solenoid valves
|
|
Stainless steel valves
Two complete ranges of stainless steel products, for all industrial applications
"Industry" ranges(ISO, Metric, ANSI...)
- Ball valve in S.S.316, plain ends or threaded (BSP or NPT), with flanges, between flanges,
2 or 3 ways, manual or automated
- Butterfly valve between flanges, cast iron / S.S.316, manual or automated
- Knife gate valve, diaphragm valve, globe valve, electrovalve...
- check valve, non-return valve, filter, stainer, sight glass...
"Food & beverage" range (SMS, DIN, Tri-Clamp, Macon...)
- Butterfly valve in S.S.316L, welding ends, threaded ends, male/female, manual or automated
- seat valve, stop or divert valve...
- check valve, safety valve, filter, sight glass, sampling valve...
We also have a range of products in brass, copper, bronze, cast iron...
|
|
30 Series: Shutoff Valves
Globe or angle pattern
Built-in metallic stop prevents over-torquing - reduces seat wear
30-1100 Series: available with metering capability (long stem optional)
Bi-directional flow (all models)
CC Series: Metering Valve
Precise control at very low flows
20+ turns from shutoff to full open
Non-rotating stem reduces seat wear
VA/VG Series: Air Operated ON/OFF Valves
Normally open or normally closed
Balanced main valve - reduces required actuation pressure (30-60 PSIG)
Compact package
Toggle actuate optional
Solenoid valve actuation (Pneumatic assist) optional
VJ Series: Cartridge Valves
Bi-directional flow
Built-in metallic stop
Globe or angle pattern
O2 compatible design
|
|
|
|
|
|
Top Line Process Equipment Company continues to be a leading supplier of quality hygienic stainless steel valves for over 40 years.
Sanitary Stainless Steel Valves such as:
Butterfly, Ball, Diaphragm, Sample, Divert, Plug, Ball Check, Disk Check
Top Line Process Equipment Company continues to be a leading supplier of quality hygienic stainless steel process equipment for over 40 years.
Our commitment to fine craftsmanship, high quality, unequaled service, and competitive pricing has led to our company's successive years of growth which has placed us among the leaders in our industries.
Top Line Process Equipment Company, originally founded in Janesville, Wisconsin in the 1950's as a provider to the dairy farm industry, is headquartered in Bradford, Pennsylvania, USA. Top Line services the Food, Dairy, Beverage, Cosmetics, Pharmaceutical, Biotechnology and electronics industries.
Top Line primarily markets its products to the Food, Dairy, Beverage, Pharmaceutical, and BioTech Industries through a world-wide network of distributors, large OEM's, and National Accounts. Top Line's involvement with its distributors includes not only providing competitively priced products but to support an ongoing line of communication between ourselves and the ultimate end user of the product. Top Line sales people travel regularly throughout the country making company and product presentations to our distributors and to their processor companies for purposes of specifying, recommending and outlining the benefits of Top Line products. Full factory support is provided to our customers along with customer and project leads.
|
|
Offshore
Pisler supplies a multiplicity o( valves in different materials for offshore usings. Main application is the service and maintenance area as well as the building of ships and platforms. For subsea application the valves can be fitted with special systems for robotic operation.
|
|
|
|
|
|
ODE presents the new solenoid valves 21JP and 31JP plastic series in order to preserve the machines from the oxidation phenomenon, from the more and more felt problem of lead and nickel release in food applications. This type of solenoid valve is suitable for applications in areas such as Vending, Coffee Machines, Pneumatics, Sterilization and other.
The new ODE 21JP and 31JP plastic solenoid valves series is characterized by the body entirely made in high quality PPS, that besides being fully compatible with applications of brass version, can reduce the limestone sedimentation ensuring a better product life. The high quality technopolymer used for this solenoid valves series is resistant against chemical and physical agents, allowing so their usage with and multiple fluids low pressure steam up to 140 ° C. The valves have 4 fixing holes ensuring interchangeability with the brass series and giving wider mounting flexibility. This new series has been subjected to numerous tests, including tests in ambient temperature and fluid for 900 hours, thermal stress and life cycles tests. Obviously all tests have been performed in real life applications. The available series includes 2/2 way N.C. and 3/2 way N.C solenoid valves, with the possibility to obtain the NSF approval and on demand the UL approved coil. The 21JP series works with coils 2.5W as well as 5W for energy savings purposes and lower operating temperatures.
|
|
|
|
|
|
Winnow with diaphragm MUCON
A range supplements valves with diaphragm for the powders and the powders, with models for all industries.
The diaphragm is out of fabric or rubber. Only a column of product rests on the diaphragm and the unit is very robust.
The closing of the diaphragm is soft and does not damage the conveyed products (ideal for the gélules, compressed, confectioneries etc...).
These valves are completely tight and have a compactness.
Thanks to the concentric closing of the diaphragm, the flow could be controlled and a proportioning could be carried out. Diameter 50mm with 450mm according to model. Hand drive operation, motorized electric or pneumatic. Material: aluminum or stainless steel.
The valve with diaphragm series JS was especially designed to seal on chutes of Big-Bag (partial draining). Body of valve notched for an optimal regulation of the flow, partly lower fixing out of standard. Simple diaphragm out of nylon or nylon polyurethane. Diameter 300 mm and 375 mm
Material of the body: Aluminum
|
|
|
These manifolds are designed for remote mounting an instruments using threaded instrument & process connections. These valves are having two isolation, one equilizer & two vent/calibration valves. The standard process & instruments connections are 1/2" NPT. Two vent connections are 1/4" NPT in all manifolds & provided with blanking plugs.The instrument connections are positioned at 54 mm center distances but can easily be used with instruments other then 54 mm C.D via screwed fittings. Different options are available as shown.
|
|
Controlling water distribution.
Water distribution is becoming more and more complex, with the strong development of urban networks, the rising quality standards and the necessity to improve efficiency by lowering energy consumption.
Danfoss Socla offers in this Regulation section a wide range of control valves; but also different air control devices (air valves, pulsairs, injectors).
|
|
|
Preso offers 2 type of balancing valves for HVAC systems: B+ and C+. The B+ and C+ Valves offer 2% accuracy and are available in sizes from 1/2" (12 mm) to 10" (254 mm), with sweat, FNPT, flanged or grooved-end connections. Valve options include pressure and temperature ports, quick-disconnect fittings, read-out gages and transmitters.
|
|
DESCRIPTION
The Apollo® 58 series provides system balance hydronic control with proven ASTM grade materials and US manufacturing.
FEATURES
- Solder connection
- 100% Factory Leak Tested
- Easy Adjustment
- Dezincification resistant material
|
|
|
|
