|
|
High Purity
Pneumatic line valve
Working pressure : 240.00 bar
Material : Stainless steel
Gas : Uhp gases
|
|
This is a compact and space saving valve of AMD, MMD 3-type, 4-type and
5-type which is popular as an air operated valve and manual valve for
chemicals used with high purity chemical liquid systems.
The performance and model variations are similar to the conventional
models. The diaphragm valve structure that eliminates the cause of
particle generation and the PFA forming body have been incorporated.
This product can be used widely for processes using chemicals and
pure water in IC manufacturing lines.
|
|
|
|
|
|
« SAK » stands for « Silo-AustragsKegel » , which means in English « Extraction cone valve for silo». The SAK is designed to control the discharge of powder or granulates out of silos.
The SAK is particullarly efficient in the following cases:
- For a « fast » silo discharge (high extraction capacity)
- For dosing the discharged powder or granulate
- For discharging a silo at different flow
- Garanty a proof closing of the silo (self closed without energy)
- For extracting and discharging “difficult” flowing powders
Working Principle:
- The cone valve is guided in a hopper located at the bottom of the silo
- The cone valve is lifted by a pneumatic bellows
- The adjustment of the opening is set by the stroke of the guiding rod one for all (basic version)
- The continuous adjustment is set by a pneumatic drive adjusting the stroke from 0 to 100% (dosing version)
- Dosing of the discharged product by adjustment of the opening of the cone valve versus the weight on scale, through an interface terminal IT 9000.
- Vibration of the cone in open position
|
|
Cryogenic Valves (Shut-off and Control Valves, Vacuum Jacketed and also for Cold Box Mounting)
Special Valves for any Cryogenic Applications (Check-Valves, Pilot Cryogenic Valves, Relief Valves etc.)
Bellows Sealed Valves (up to PN600)
Cryogenic Transferlines and Couplings (Johnston and Multi-Coaxial
Couplings) Space Cryogenic Components
Custom made Cryogenic Components e. g. Cryostats and Ejectors
|
|
Type:
DOUBLE BLOCK & BLEED split body
DOUBLE BLOCK & BLEED type ‘‘End entry’’
Design: B16-34 – API 6D
Nominal Sizes range: DN50 (2’’) to DN400 (16’’)
Pressure rating range: Class 150 to Class 2500
End connections: flanges, socket welding, Hub ends,…
|
|
|
VARIVENT® double-seal valves type C have a one-part valve disk with a double seal. They are used for mixproof separation of incompatible media at flow path intersections within the pipe system. Double seal valves are the economical alternative to the generally used double-seat valves. The valve`s isolation chamber is equipped with two rinsing valves which are provided for leakage detection and cleaning of the isolation chamber itself. It is possible to clean the isolation chamber both separately and during pipe cleaning.
|
|
|
|
|
|
Brief introduction
BT-1000 was developed by Bettersize dedicated to determine the flowing properties of the ppowders. Whether flow or stay, powder is two-phase system. Intrinsic properties and collisions of particles will generate special flowing properties it is significant to study for powder processing, transport, packing, storage. This unit is characterized by multi-functions, easy operation, good repeatability, flexible test device to suit many standards. The success of the instrument provide a new measure for universal deployment of the powder integrative characteristics work.
It can test angle of repose, collapse angle, flat plate angle, dispersibility, bulk density and tap density, after that can obtain difference angle, compressibility, voidage, regularity & uniformity, also by Caar index user can get flowability index and jetting ability.
Standard test properties
1. Tap density: vibrate a container loaded with powder to fill up air gap among particles thus make powder more compact, in which means flowability and voidage are obtained. (Note: tap density of metallic powders are measured in conformity with related standard.)
2. Loose density: the density of powders, which fill a special container naturally. It is important for storage container and design of packing bags. (Note: loose densities of metallic powders are measured in conformity with related standard.)
|
|
Silo(Redler)-outlet-gates, electrically operated including worm-gear-motor, 230/400 V, 50 Hz, and 2 mechanical limit-switches.
Slide plate runs on ball bearings in a U-frame.
Material: primed steel.
Product-contacting parts made of stainless steel on request.
ATEX version according to category 2 or 3 with admissible Zone 20 in the slide plate on request.
Application: Shutting off of bulk goods without over-pressure.
|
|
Outlet Valves, DIN 42568
Bronze body, screwed topwork in brass
Outlet with cap and chain
Part No. 03199.0150.0060
Inlet: round flange drilled acc. to DIN PN 6
Part No. 03199.0320.0060
Inlet: square flange drilled acc. to DIN PN 6
Available options - on request only:
* Handwheel in cast iron
* Handwheel in bronze
* Valve with opening indicator
* Valve with locking device (with or without lock)
Applications:
Suitable for transformer oil.
Working temperatures: -25°C / -13°F (248K) up to +115°C / +239°F (388K) and maximal 5.0 bar
|
|
Pigging is the complementary technology for batch and semi-continuous processes.
It is implemented at every process step, for the transfer of raw materials (unloading of tank trucks), semi-finished products (transfer from tank to tank) and finished products (transfer to filling lines).
|
|
For piping system control and regulation we offer pneumatically or electrically actuated valves in various materials.
Angle Seat Valves
Ball Valves
Butterfly Valves
DIASTAR Pneumatic Diaphragm Valves
Process Control Valves
Solenoid Valves
|
|
Powder rotary valve
- High filling efficiency
- Sheared angle inlet
- Minimum air leakage
- Explosion proof models available up to 10 bar g
- Customised solutions
- Bored flanges in accordance with PN 10, ANSI 150 lbs and JIS
|
|
|
|
|
|
Many industrial applications require very robust valves which are resistant to thermal shocks and dusty or damp conditions.
They must be able to transport liquids such as steam of more or less good quality, high pressure hot water, hot or cold liquids, corrosive liquids, inert gasses or the vacuum.
Application sectors involved:
- rubber vulcanization
- dry cleaning and industrial cleaning
- iron and steel
- sugar
- boilers
The new 298/398 range with its stainless steel body, has all the qualities that these industries require.
- a resistance of 2 million cycles of saturated steam
- a working pressure up to 40 bar
- a bidirectionnel passage
- anti-pressure surge by design
- a large operating pressure range from 1 to 10 bar
- use of noble materials in order to work with liquids with temperatures from - 10 to more than 250°C and in atmospheres with temperatures from - 25 up to 180°C.
Thanks to its water and dust protection system, the valve when mounted in any position may be placed on the outside.
Robust but also highly effective, the 298/398 range is equipped with the latest technological advances which markedly increase its reliability (new generation valve).
|
|
|
|
|
|
Series 2600
ASME NB Certified: Air, Steam & Water
European CE Approved
Sizes 1″ X 2″ to 20″ X 24″. Actual orifice areas from 0.150 to 176.7 square inches.
Pressures from 15 to 6000 psig. Temperature range from -450° F to +1500° F. Steel
body and bonnet with stainless steel trim.
Optional balanced bellows design isolates working parts and top-works from fouling
or corrosive service, and nullifies the effects of back pressure on valve performance.
The “D” to “T” orifices meet API Standard 526 covering orifice areas and center-toface
dimensions. Super capacity types range from “W” (63.62 sq. in.) to “Z” (176.7
sq. in.) and have a maximum set pressure limit of 300 psig.
Optional materials of construction include complete 316 stainless steel, Monel®,
and Hastelloy® C. Also available with materials in compliance with NACE standards.
Higher temperature models use chrome moly body and bonnet.
Optional O-ring elastomer seat available for maximum tightness.
Applications: air, steam, gas, vapor, and liquid process applications
|
|
Process Valves
Strahman is a leading manufacturer of process valves. In 2004, they acquired MG Process Valves and now offer a complete line of valves including:
Ball
Drain
Gate
Injection
Line blind
Multi-way (2 - 12 ways)
Ram
Sampling
Spray rinse
Tank bottom
Most valves can be supplied with jackets, vacuum hoods, butt weld or flanged connections, and a variety of seals, seat designs, actuators, and configurations.
|
|
STEVI AS
The Y-pattern process valve
- Stays tight for up to 1,000,000 strokes due to the superior, self-adjusting
stem sealing system
- Up to 31% energy saving due to the excellent flow values
- Convenient handling because the control line is connected quickly and easily
|
|
Ideal for low flow applications such as brake circuits, clutch control or pilot systems. Also pump swash control
Uses include two pressure systems where high flow coupled with very stable outlet pressure is required. These valves do not have reverse relief protection
For use with two pressure systems as with the 1PA series but including reverse relief protection.
|
|
ARI-PREDU
Application : Industrial installations, processing technology, plant manufacturing, etc.
Medium : Steam, neutral gases, vapours and liquids, etc.
eClass-No.: 37011101
|
|
Slide Valves - Slim Slide Valves
This cost effective valve is available with round or square inlets between 125mm and 350mm, with a choice of manual, single pneumatic or motorised operation.
Used when isolating the flow of dry free flowing powders, granules and dust.
For use on various types of gravity feed applications, e.g. silos, hoppers, screw conveyors etc, where automatic operation is required.
|
|
Ball valve according to B16-34 – API 6D (Floating & trunnion supported)
Ball valve for Navy application
Transflow type ball valve
Cryogenic ball valves
Multi-way ball valves : 3-way, 8-way,…
Custom made ball valves
Design: B16-34 – API 6D
Dominal sizes range: DN15 (1/2”) to DN600 (24”)
Pressure rating range: PN10/PN16 – Class 150 to Class 2500
End connections: flanges, socket welding, hub ends,…
The Materials : Aluminium-Bronze, Duplex and Super Duplex , stainless steel
904L , Monel , Incolloy 625, Alloy 800 & 825, Hastelloy, Stainless steel: A351 CF8M, A351 CF3M,..., Carbon steels: A216 WCB, A217 C5, A217 WC9...
|
|
The VS valve is of simply design and all in aluminium alloy ocnstruction. The change of the flow direction is obteined by a sliding selector operated either electrically or pneumatically systems.
For more info, pls refer to our web site
|
|
Type:
Gate valves (Design according to API600, ANSI B16.34 or BS 1414)
‘‘Through conduit gate’’ valve according API 6D – B16-34
Gate valves for Navy application
Jacketed gate valves
Cryogenic gate valves
Gate valves for Oxygen service
Bellows sealed gate valves
Parallel slide gate valves
Pressure sealed bonnet gate valves
Custom made gate valves
Design: API600 – B16-34 – API 6D – API 6A (5000 & 10000)
Nominal Sizes range: DN15 (1/2”) to DN650 (26”)
Pressure rating range: PN10/PN16 – Class 150 to Class 2500
End connections: flanges, socket welding, Hub ends,…
|
|
Swagelok® Valves and Manifold Valves
Valves: Ball, Bellows-Sealed, Bleed and Purge, Check, Diaphragm-Sealed, Manifold, Metering, Needle: Shutoff and Regulating, Pinch, Quarter-Turn Plug, Relief, and Sample Stream Select
Integral tube fitting ball valves in sizes up to 2 in. and 50 mm
Flanged process valves up to 3 in. (DN80)
A large variety of special application valves
|
|
Tap with ball
Spherical plug valves 2 vertical ways
Safi Valves develops ranges of anti-corrosion thermoplastic taps, especially dedicated to the industrial applications.
|
|
TYPE GATE, GLOBE
SIZE RANGE 1/2” TO 24”
BONNET TYPE BOLTED, WELDED
MATERIAL A105, F304, F304L, F316, F316L WCB, WC6, WC9, C5, C12, CF8, CF3,
CF8M, CF3M, CF8C, CF10, DUPLEX, INCONEL, MONEL, HASTELLOY…etc
PRESSURE RANGE CL 150 TO 2500
ENDS SCREW, SOCKET WELD, BUTT WELD
FLANGE: ANSI, JIS, DIN
OPERATOR HANDWHEEL, CHAINWHEEL, BEVEL GEAR, PNEUMATIC, HYDRAULIC, MOTORIZE
|
|
TYPE SLEEVE, LUBRICANT, DOUBLE BLOCK, ECCENTRIC, FULL LINING (PFA,
FEP)
SIZE RANGE 1/4” TO 24”
BONNET TYPE TOP ENTRY, BOTTOM ENTRY
MATERIAL WCB, CF8, CF3, CF8M, CF3M, CF8C, CF10, DUPLEX, INCONEL, MONEL,
HASTELLOY…etc
PRESSURE RANGE CL 150 TO 2500
ENDS SCREW, SOCKET WELD, BUTT WELD
FLANGE: ANSI, JIS, DIN
OPERATOR LEVER, CHAIN LEVER, WARM GEAR, PNEUMATIC HYDRAULIC, MOTORIZE
|
|
Electrical Post-Mix Taps with Flow Control to maintain the fluid flow constant depsite any pressure variations. Ideal for water, soda, soft drinks, fruit juice and wine. Operates with coils of 24V / 50Hz 5W. SK approved.
Electric Pre-Mix Taps for beer or soft drinks dispensing. They work with 24V rectified current with a max absorption of 40W. SK Approved
Electrical Pre-Mix Taps with compensator wich permits the regulation of the fluid flow, suitable for water and soda. SK Approved
|
|
|
Connections, Flexible devices, Valves, Clamps for: Watering, Compressed air, Welding, Irrigation, Fire, Hydraulics
|
|
Electronic Auto Drain Valve
Electronic Auto Drain
Bossmanfilter have set the industrial standard on condensate autodrain drainage. With its high reliability, and designed to handle even the most oily condensate for all compressed air applications.
Additional Features
Easy replacement of timer card only and not full assembly
Longest drain time frequencies for saving compressed air energy.
Individual application capacities like receivers, filters and separators etc.
Longer service life by way of having Built in 'Y' type strainers.
Location
Air receiver, After Cooler, Moisture separator, Filters, Dryers etc.
|
|
|
|
