|
|
* The W15TM sampling valve is designed for sampling high viscosity products or for large samples of medium or low viscosity products, with particles up to 8mm in diameter. The main product range the W15TM is used in have about 0-50,000cP viscosity.
* The W25TM is the largest Keofitt® sampling valve. Designed for sampling of very high viscosity products or large samples of high viscosity products, with particles up to 17mm in diameter. The main product range the W25TM is used in has 0-250,000cP viscosity.
* The Ingold® sampling valve is designed for sampling medium viscosity products, with particles up to 1.2mm in diameter. The main product range are used in have about 0-800cP viscosity.
* The W9TM is the standard Keofitt® sampling valve, the valve others are measured to. Designed for sampling medium viscosity products, with particles up to 3 mm in diameter, if fitted with PTFE membrane and 2mm when fitted with silicone or EPDM membrane. The main product range W9TM valves are used for products that have about 0-1,000cP in viscosity.
* The M4TM sampling valve is the smallest Keofitt® valve, designed for sampling of low viscosity products, with particles up to 1.5mm in diameter. The main product range the M4TM valve is used for has 0-100cP viscosity. |
|
| Sentry Equipment makes a variety of in-line, tank and closed loop sampling valves designed for safe, simple and accurate sampling. Needle or tube stub sample interfaces. Custom configurations to meet any process sampling need. |
|
| The W25TM is the largest Keofitt® sampling valve. Designed for sampling of very high viscosity products or large samples of high viscosity products, with particles up to 17mm in diameter. The main product range the W25TM is used in has 0-250,000cP viscosity. |
|
M4TM sampling valve:
The M4TM sampling valve is the smallest Keofitt® valve, designed for sampling of low viscosity products, with particles up to 1.5mm in diameter. The main product range the M4TM valve is used for has 0-100cP viscosity. |
|
Shut off valves are used in the liquid line of a refrigeration system. They are generally used as a manual shut off valve.
The ABV isolates suction, discharge, and liquid line pipework during maintenance shutdown periods.
Featured with :
- Forged brass body
- Hermetic design
- Compatible with new refrigerants/lubricants
- Full internal ports through 2 1/8"
- Bi-directional fl ow characteristics
- Valve stem cap retained by strap attached to main body
- Integrated access port available on all sizes |
|
Shut off valves are used in the liquid line of a refrigeration system. They are generally used as a manual shut off valve.
The ACK check valve is a normally closed magnetic check
valve that prevents reverse refrigerant fl ow in liquid lines and compressor discharge lines.
Featured with :
- Copper Connection Sizes 1/4" through 2-5/8"
- Hermetic Spun Copper Design
- Near Zero Internal Leak Rate
- Magnetic Checking Action
- Built-In 30 Mesh Stainless Steel Strainer
- Can Be Installed In Any Position
The ABV isolates suction, discharge, and liquid line pipework during maintenance shutdown periods.
Featured with :
- Forged brass body
- Hermetic design
- Compatible with new refrigerants/lubricants
- Full internal ports through 2 1/8"
- Bi-directional fl ow characteristics
- Valve stem cap retained by strap attached to main body
- Integrated access port available on all sizes |
|
| Streamlined flow valves, outside screw with bellows, maintenance free, manufactured of stainless steel PN 40. |
|
WEKA Stainless Steel Valves are based on know-how meticulously acquired over years of development and manufacturing of critical stainless steel components for industry and science. WEKA constantly works with customers to develop new solutions for special applications and process requirements. Our technological strengths have resulted from our wide and deep applications experience in specialized fields.
WEKA Stainless Steel Valves are widely used in chemical process industries, hydraulic power equipment, thermal power plants, petrochemical industries, cryogenic processes of liquid air separation plants, and cryogenic and high-pressure gas purification processes.
WEKA Stainless Steel Valves are the preferred choice for applications involving temperatures extremes (down to -196 °C, up to 400 °C) and high pressures (up to 700 bar). |
|
KZValve's 3-piece, SS, two way, motorized ball valves are the most versatile, reliable and affordable valves on the market today. Complete with a swing out style design, our valves also include a manual override capable bracket and coupling.
Design Features:
- Max PSI 1000
- Manual Override Capabilities
- All KZCO actuators are NEMA 6P rated
- Valve sizes range from 1/2" to 3"
- PTFE seats and stem seals backed by a durable Viton O-ring
- Actuators are available in 12 or 24 VDC and 24 VAC with various
control and feedback options |
|
The Copes-Vulcan DSCV is an angle style valve that combines pressure and temperature reduction . The DSCV is custom engineered for specific operating parameters.
DSCVs are generally used for Turbine Bypass applications where the valves typically remain closed for long periods of time to isolate steam flow.
Features:
- High flow capacity to 9500 Cv
- Pressure class to ANSI Class 4500
- Unlimited inlet/outlet connections available
- Class V shut off available
- Multiple spray configurations available
- Valve trim serviceable in line through bonnet
- Low noise trim options including Raven and Hush styles
- Broad range of actuators to meet stroke time requirements
- Diffuser provided for additional noise and vibration control |
|
Style 575 Angle Ball Valve
The Dresser® Style 575 Angle Ball Valve provides dual service... as a main-to-service compression end tee connection, and as a shut-off valve.
Constructed of a unique combination of a rugged ductile iron body and a highstrength engineered plastic plug, the "575" valve offers a low torque 90-degree operation with positive, bottle-tight shut-off at pressures up to 125 psi.
Designed for durability under all service conditions, the interface of ductile and engineered plastic components eliminates any possibility of valve freeze-up due to corrosion.
The "575" eliminates the presence of an isolated metallic valve in a plastic service. The ductile material in the valve body is compatible with the cast iron main, so there's no need for anoding and monitoring. Plus, an optional AL-CLAD® Plastisol coating can provide even greater external corrosion protection. The compression end for connecting the service is of a time-proven Dresser design and meets all the requirements of D.O.T. 192.283(b), providing a permanent seal and pull-out resistance greater than the PE tubing in tension.
The "575" is available in inlet sizes 1-1/4" or 1-1/2" MIPT and an outlet size of 1-1/8" OD, but it can be readily adapted to other outlet sizes as required. |
|
Thermostatic expansion valves are designed for a wide range of air conditioning, refrigeration, heat pump and chiller applications.
Our integral valve line includes valves for commercial and refrigeration applications, as well as heat pump and residential applications. The "Take-A-Part Series" valves are the answer to your unique needs, available for almost any type of application, temperature range, or any known refrigerant. We also offer a complete line of specialty valves. Consult us for your specific system requirements.
The Thermo® Expansion Valve is a precision device designed to regulate the rate of refrigerant liquid flow into the evaporator in the exact proportion to the rate of evaporation of the refrigerant liquid in the evaporator. The amount of refrigerant gas leaving the evaporator can be regulated since the Thermo Valve responds to the temperature of the refrigerant gas leaving the evaporator and the pressure in the evaporator. This controlled flow prevents the return of refrigerant liquid to the compressor. The Thermo Expansion Valve controls the flow of gas by maintaining a pre-determined superheat. |
|
MANUAL :
two and three way for vacuum interception and distribution
TRISEA :
versions with horizontal clapet or with vertical spring return, they serve for automatically sealing a vacuum circuit
PUSH VALVES :
with a pin or ball valve shutter and combined with the various suckers, they start suction only on contact with the object to be handled
SHUT-OFF VALVES :
fitted on the suckers they automatically shut off suction in the case of leaks, avoiding the loss of vacuum on the correctly gripping suckers |
|
HTC manufactures UHV valves and HV valves, Vacuum Valve Series: Angle Valve ,Z-Inline Valve ,Y-Inline Valve, Stainless steel valve.
-- Polished 304 stainless steel body.
-- 3/4~2inch port ODs.
-- Bakeable to 150C(200C intermittently for CF flagne port).
-- Metal Seal Bonnet:10-9 Torr vacuum rating KF and approximate 10-10 Torr vacuum rating CF flange
|
|
Diaphragm control valves, of semi-direct type,
Body materials: SG cast iron, Steel, or Chromed stainless steel and cast iron.
Coating: Ebonite, Butyl, Anti-abrasion, Rilsan, Halar, PTFE, etc…
Membrane adaptable to all types of fluids Loaded or Viscous:
BLD, Chlorobutyl, nitrile, neoprene, EDPM, hypalon, viton.
Foodstuffs quality: All types of elastomers.
From DN.20 to DN.300
FTF spacing: Standards NF EN 558 series 1, DIN3202 F1 or BS 5156 (up to DN.200).
Flanges PN.10 and ASA.150#, taped ends, SW or BW weld ends (from DN.10 to 40)
Manual, pneumatic NO/NF, Double effect, electric (Servomotor) controls.
”On/off” controls, Regulation possibility. |
|
Control valve with integrated positioner for sterile applications in food and chemical industry. Zero hold up volume and self draining. Designed for Cleaning in Place.
Sanitary valves designed for clean-in-place/
steam-in-place applications are offered for use
on sterile applications in various pharma-
ceutical, healthcare, and food & beverage ap-
plications.The 6020 valve is a plug and seat
design, which is easy to operate and dismantle
for cleaning purposes. The 6021 aseptic
valve incorporates a specially patented roll
membrane with high strength capabilities and
no dead space making it suitable for appli-
cations where EHEDG approval is required |
|
The Type T Valve is designed for heavy-duty service. It is typically used for slurries, abrasives, and heavy density materials. The T valve is available in 316 stainless steel, Cast Iron, Aluminum as standard and can be fabricated from any weldable alloy with the full range of sanitary finishes. Options include high temperature or pressure (3 bar) designs. T valves are commonly used for charging and discharging hoppers, tanks, silos, conveying systems, and weighing systems.
|
|
DIAPHRAGM VALVE - PILOTING PNEUMATIC
2 POSSIBLE FLOWS OF DRAIN
1 ONLY VALVE FOR 2 FUNCTIONS
POSSIBLE FLUIDS: VAPOR, WATER SURCHAUFFEE, COOLING WATER, NITROGEN AND GASES NEUTRAL. |
|
Pneumatically operated control valve in angle seat construction. The integrated positioner makes a compact design. All parts getting in contact with the fluid are made from stainless steel. Available also with digital positioner Type 8048.
|
|
| The sanitary K Valve is designed to USDA and FDA guidelines eliminating threads, keyways, and crevices. The split body design means the K-valve can also be completely disassembled by hand allowing quick and easy inspection and cleaning. It is used for charging/discharging or in-line with standard quick clamps allowing fast installation and removal. The K valve is offered in sizes from 3" to 8" (75 to 200mm) in practically any weldable alloy with the option of #4 satin or #7 mirror finish. Pressure and vacuum applications are engineered to order. Commonly used in the food, pharmaceutical and nutraceutical industries or anywhere where cleanability and quick change over is required. |
|
|
|
