|
|
507V:
Incorporated in the disc edge are vane-like teeth which are set at a critical angle. The valve displays superb control characteristics. The teeth around the disc edge break down the fluid energy acting on it with a resultant reduction in pressure recovery. The gull wing-like disc profile touches the seat at a pre-determined angle which results in greatly reduced seating/break out torque.
508V:
Incorporates the gull wing and toothed disc edge features of the 507V, but with an integral EPDM rubber seat which includes the proven cosine curve seating features.
The use of the rubber seat ring eliminates the need for an expensive additional stop valve. The 508V seat ring is built around a metal core ensuring stability whilst the valve is working under control conditions.
Face-to-face dimensions are to ISO5752 basic series 20. |
|
| Larox Flowsys Oy is manufacturing reliable and functional pinch valves to process industries worldwide. Larox valves are well suited for shut-off and control applications involving abrasive or corrosive slurries, powders or any other types of materials that can lead to packing and hardening at the valve. Various sleeve, actuator and valve body materials are available to handle a wide range of fluids and materials. The standard range of Larox Valve solutions is for diameters 25 mm - 1000 mm, temperatures -50 C - +160 C, and pressures 0 - 100 bar. |
|
The PRS6 is a three-way pressure reducing valve that has been developed to give reduced pressure in a particular part of the hydraulic system. The valve maintains the secondary pressure setting constantly, regardless of pressure variations on the primary side. Common applications include pilot circuits in hydraulic and electro-hydraulic servo systems.
Compact and easy to install
Easy to adjust within respective pressure range
Can be factory set and sealed to prevent unauthorized pressure changing
Highly suited for use as a reducing valve in pilot circuits where the pilot pressure is taken from the main circuit |
|
TECHNICAL DATAS
Ball bearing axle
Inspection cap : galvanised steel
Flap that can be dismantled-high resistance dynamic gasket for Airtightness with permanent pressure
Standard finish : one-coat paint
|
|
| Every air system is unique...and Clippard has the air valve you need. Clippard control valves are available in poppet or spool design; 2-, 3-, or 5-way functions, in sizes from #3-56 and #10-32 (M5) through 1/8" NPT (G1/8"); and for pressure to 300 psi(21 bar). They are available with solenoid, air pilot, manual and mechanichal actuators. Mounting styles include inline, panel mount, manifold mount or clearance holes for mounting screws. |
|
Valves for an accurate regulation of micro, medium and large flows.
Pressure interval: 105 bar
Temperature interval: -20ºC / 200ºC
Connections: from 1/4" to 3"
Made in several alloys.
|
|
Comprehensive selection of control valves to meet every application :
- Self-acting temperature control
- Self-acting pressure control
- Piston actuated
- Ball valves
- Globe valves
- General service, special service & severe service |
|
Diaphragm valves, plastic and metal
DN 12 - 100; valve bodies in plastic (PVC-U, ABS, PP, PVDF, PFA, Inliner PP-H Outliner PP reinforced) and DN 4-100 metal (brass, cast iron, S. G. iron, cast steel and stainless steel; lined with hard and soft rubber, PP, PFA, PVDF, Halar etc.); connections to DIN, ISO, ANSI, BS, JIS etc.; manual, pneumatic and motorized operators
|
|
| Dia-Flo diaphragm valves are the workhorses and foundation of Engineered Valves' product offerings. Durable, dependable Dia-Flo diaphragm valves are engineered for tough work environments in the chemical processing, water treatment, pollution control, food and beverage, mining, pharmaceutical, pulp and paper, and power generation industries. ITT is a leader in valve technology and the foremost innovator of diaphragm type valves. The diaphragm valve is dependable, cost effective and versatile and is installed across the world in virtually every type of process plant. |
|
| Diaphragm valve type MV/F, PN 16, from DN 65 PN 10, upper part complete of stainless steel with travel stop and stroke index, body material: ductile cast iron EN-JS 1049 acc. to DIN EN 1563 (0.7043 DIN 1693), diaphragm of modified PTFE (TFM) with EPDM-diaphragm support, epoxy coating, bonnet, hand wheel compressor and nuts and bolts of stainless steel, face to face: DIN EN 558-1,basic series 1, ISO 5752 series 1 (DIN 3202F1), flange connecting dimensions: DIN EN 1092-2 type B, ISO 7005-2 type B (DIN 2533) |
|
| Achieve reliable performance with the complete line of Swagelok® biopharmaceutical fluid system components including sanitary fittings, radial and weir-style diaphragm valves, ball- pinch- and plug-valves, butt weld and sanitary clamp fittings, and pumps |
|
High Purity diaphragm valves in PFA-HP, PVDF-HP and PP
Cleanroom manufactured High Purity valves for microelectronics, semiconductor production, solar industry and opto-electronic production
DN 6 - 100; valve bodies in ultra-pure plastic materials (PFA-HP, PVDF-HP and natural PP), own cleanroom production in Switzerland, manual, pneumatic and motorized operators, FlareStar PFA-HP fittings, HydraLine pressure measurement devices, TubeStar PFA-HP tubing, SonicLine PFA-HP ultrasonic flowmeter, variable area flowmeters in PVDF-HP
|
|
MODELS : V4D01,V4D02,V3D06(Subplate Mounting)
SIZES - 1/4 " TO 3/4"
Max Pressure: 500 psi(350 bar)
FLOWS : 24 - 132 gpm / 90 - 500lpm |
|
The Clippard's Electronic Valves combined with a serie of manifolds provide a complete system for efficient interface with electric and electronic circuits.
Lilke a mouse, these valves are quiet, quick, eats very little and are cute. Valves accept low voltage, low current signals, convert them into high pressure (100 psi/ 7 bar) pneumatic outputs. Optional low pressure/medium or high flow are available.
Clippard Minimatic electronic valves are precision-built 2- or 3-way control valves, utilizing a unique, patented, valving principle. There are no slidings parts. Complete poppet travel is a mere 0.007"(0.18mm). As a result, low power consuption and exceptionally long life are major benefits of this design.
The valves are very quiet in operation and also very cool. The valves' small size makes them well suited to a wide range of applications. |
|
Series 240 Control Valves are available in nominal sizes ranging from DN 15 to DN 300 (½" to 12") and up to a nominal pressure PN 40 (Class 300).
Control valves in the standard version are suitable for temperature ranges between -10 and 220 °C (15 and 430 °F). An insulating section allows the temperature range to be extended to -200 and 450 °C (-325 and 840 °F).
The plug stem is sealed either by a self-adjusting PTFE V-ring packing or an adjustable packing. To meet stricter emissions control requirements, a stainless steel bellows is used. The Type 3241 Control Valve can be equipped with a heating jacket that may also include the bellows.
Series 250 Control Valves are used when large nominal sizes and/or high pressures are involved in process engineering, power plant or supply engineering.
In addition to globe, three-way and angle valves, four-flanged valve bodies with bottom plug stem guides, and valves with axial multi-stage throttling plugs, customized valve constructions to meet customer specifications can be engineered as well.
The valves are manufactured in nominal sizes from DN 15 to DN 500 (½" to 16") and for nominal pressures between PN 16 and PN 400 (Class 150 to 2500).
The standard versions of these control valves are suitable for temperatures ranges between -10 and 220 °C (15 and 430 °F). This temperature range can, however, be extended by using an adjustable high-temperature packing to a temperature range between %u201310 and 350 °C (15 and 660 °F) and by using a bellows seal or an insulating section to a temperature range between %u2013200 and 500 °C (%u2013325 and 930 °F).
Series 280 Steam-converting Valves are used to reduce both the steam pressure and steam temperature to optimize plant operation and heat efficiency in process plants, for example, in refineries, food and beverage, tobacco or pulp and paper industries.
Steam-converting valves are based on Series 250 Valves fitted with a flow divider St III and an additional spray water connection. They are available in nominal sizes ranging from DN 50 to DN 400 (1" to 16"), with nominal pressures of PN 16 to PN 400 (Class 150 to 2500) and for temperatures up to 500 °C (930 °F).
The Type DUV-C3 Steam-converting Valve from Welland & Tuxhorn is designed for high-pressure ranges and can be engineered with varying inlet and outlet sizes. The inlet nominal sizes range from DN 80 to DN 500 and the outlet nominal sizes
from DN 100 to DN 1600. Large amounts of spray water can be injected thanks to the integrated atomizing steam cooler. The valve can be operated in a wide load range. |
|
| SchuF manufactures specialised Contol Valves for the Chemical, Petrochemical, Oil, Refining, Mining and Power industries. Our control valves range from multistage angle to multiport diverter valves. They include high pressure, high temperture let down valves, boiler, feed and start up valves, disc and piston drain valves with contoured discs and rams, distributor control valves, and bellows sealed valves. |
|
| All series are a non-rotating rising stem design, working pressures to 150,000 psi (1379 bar). Tubing sizes range from 1/4" to 1".Tubing connections utilizes Autoclave's coned and threaded design. Operating temperatures from -423°F to 1200°F (-252°C to 649°C). 316 stainless steel construction, other options available. |
|
Pneumatic, electric and hydraulic control valves in all common sizes, pressure ratings and materials in accordance with ANSI, DIN and JIS standards.
Optionally, the valves are available with metal bellows and low-noise trims.
|
|
APV Valves
Over 40 years experience in valve development and production
Valves are essential parts of every processing plant. The APV DELTA valve range has been developed for the process industries, and tailored to the continually increasing requirements for:
* Problem free product flow
* Through flow control
* Safe separation of fluids
* Perfect cleaning
With its comprehensive DELTA valve programme APV offers convincing solutions in those areas where the highest demands on quality and hygiene are made. APV valves offer optimum protection for your products.
* Butterfly
* Single Seat
* Aseptic Single Seat
* Double Seat Mixproof
* Ball
* Aseptic Mixproof
* Safe Flow
* Butterfly Mixproof
* Regulating
* Constant Pressure
* Safety
* Sampling
* Non-Return
* Pressure Relief
* Vacuum
There is over 40 years of experience, research and development invested in our valve range. Complementary to this is the process engineering know-how gathered over 25 years, resulting from installing hundreds of processing plants world wide in brewery, beverage, dairy and food industries, not to mention the pharmaceutical and chemical industries.
APV places particular value on the highest quality of each individual component, thereby ensuring total reliability, a long life cycle and thus satisfaction for the large circle of APV customers.
|
|
| Control valve, type RSS/F, PN 16, body material: ductile cast iron EN-JS 1049 acc. to DIN EN 1563 (0.7043 DIN 1693), heavy-duty PTFE bellows with internal stainless steel support rings, seat and plug made of modified pure PTFE replaceable, stainless steel stem, with travel stop and rubber protective bellows acc. to German accident prevention regulations, epoxy coating, stainless steel nuts and bolts, face to face: DIN EN 558-1, basic series 1, ISO 5752 series 1 (DIN 3202F1), flange connecting dimensions: DIN EN 1092-2 type B, ISO 7005-2 type B (DIN 2533), control characteristics to DIN EN 60534, equal percentage, linear, on-off. Rangeability 1:25 |
|
Lined control valves suitable for aggressive media with isostatic lining, valve trim and bellows seal made of PTFE.
As a reasonably priced alternative, the valves are also available with a transfer molded lining of PFA.
|
|
Whatever you want from a Bulk Materials cut-off valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’ |
|
| SchuF designs and manufactures a range of standard and special diverter valves. Many of our multiport diverter valves are exclusive designs for critical processes and often for severe applications. They are widely used in the PTA, Petrochemical, Polymer & Plastics, as well as Refinery industries. |
|
| Automatic elastic deformation valves comprise a valve body and a cylindrical sleeve coated in natural gum or synthetic rubber. |
|
DV-02 Pinch Tube Valve
The DV-02 valve design utilizes a plastic tube as the valve mechanism. In the 'valve off' state, the tube is pinched closed by a plastic plunger. When signaled to open with the 'valve on' command, the plunger is forced back by way of a pneumatic cylinder. As the tube opens, fluid is forced to flow through the valve. The fluid flow may be throttled with an adjusting screw that limits the plunger travel.
Features
- Positive shutoff is required
- Material can be supplied in cartridges, syringes, or bulk
- Short clean-up time
- Ideal when pressure-time dispensing is acceptable
- Syringe plunger is required
Recommended Applications
- Solder Paste
- Adhesives
Dispensing Systems
D-580 DispenseMate® Benchtop Dispensing System |
|
Superior Design:
Hayward all-plastic diaphragm valves have been specifically designed to perform in the most demanding liquid, gas, and slurry applications in both on/off and modulating service.
Position Indicator:
Hayward's standard highly visible, beacon-type position indicator will always give positive position indication, unlike rising stem indicators that can be inaccurate because of misadjusted stems. Sight panels are made from clear Eastar®.
Diaphragm Saver:
The Diaphragm Saver travel stop is a standard feature on all sizes of Hayward Diaphragm Valves. Its special design prevents overcompression of the diaphragm and prolongs its service life.
No Corrosion Problems:
These valves have no wetted metal components. The valves will never fail because of corrosion and they do not require painting or epoxy coating to stand up to aggressive environments.
True Union Design:
Hayward Diaphragm Valves with socket or threaded connections have a true union design so that they can be removed from the line without having to disconnect piping connections. |
|
Series 240
Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA
Application
Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA)
Valve size ½" to 6"
Pressure rating ANSI Class 125 to 300
Temperatures -20 to 430 °F (-29 to +220 °C)
Industry codes ANSI, ASME and ASTM
Type 3241 Globe Valve with:
Type 3271 Pneumatic Actuator (Type 3241-1 Control Valve)
Type 3277 Pneumatic Actuator (Type 3241-1 Control Valve) for integral positioner attachment
Type 3275 Pneumatic Piston Actuator (Type 3241-9 Control Valve)
Valve body manufactured of:
Stainless carbon steel in acc. with ASTM specification
Forged steel or stainless forged steel
Stainless carbon steel
Undivided valve bonnet
Valve plug: Soft sealing, Lapped-in metal.
Standard version for temperatures ranging from –20 °F to 430 °F (-29 °C to +220 °C)
- Type 3241-1 DWA (Fig. 1) · ½" to 3" with Type 3271 Actuator (see Data Sheet T 8310-1 EN)
- Type 3241-7 DWA (Figs. 2 and 4) · ½" to 3", valve in forged steel up to 3", with Type 3277 Actuator for integral positioner attachment (see Data Sheet T 8310-1 EN)
- Type 3241-9 DWA (Fig. 3) · ½" to 6", with Type 3275 Piston Actuator (see T 8314 EN), for integral positioner attachment and/or limit switch (see Data Sheet T 8310-1 EN) |
|
| Control valves for the food processing industry made of polished stainless steel with cavity-free body, PTFE packing or diaphragm seal and connection to a steam or sterile fluid line (optional). The valves comply with FDA and EHEDG regulations and can be sterilized using CIP or SIP. |
|
| Larox PVEG is a new pinch valve designed especially for waste treatment plant and other light slurry lines. The body material is polyamide blend, which makes the valve body very light, durable and cost effective. Larox PVEG has standard face to face ANSI B16 dimensions so it can easily be used as replacement to ball, plug and diaphragm valves. Currently Larox PVEG is supplied with handwheel for working pressure up to 10 bar. The available valve sizes are 50mm, 80mm, 100mm and 150mm. |
|
MODELS : VR1E02 (PANEL MOUNTED/SUB-PLATE)
VR4* (SUB-PLATE / THREADED/CARTRDIGE)
VR5* (FLANGE MOUNTED)
VVV01 (SOLENOID VENT VALVE)
SIZES - 1/4 " TO 1-1/2"
FUNCTIONS : REDUCING / RELIEF / SEQUENCE / UNLOADER
FLOWS : 1.7 - 159 gpm / 6.6 - 600 lpm |
|
|
