|
|
Drills are basic manufacturing tool whose speed, precision, and safety have an important bearing on the quality and efficiency of production operations.
OSG is gaining an increasingly large share of the drill market through the development of drills that ensure superior productivity.
Used in combination with OSG's taps and end mills as a total tooling solution, OSG drills provice manufacuturers with various business advantages, including cost savings.
Try with our:
- EX-SUS-GDS/GDR drills for stainless steels (No pecks anymore!)
- VP series for hardend steels with high speed drilling
- SH-DRL for quenched and tempered steels (up to 70 HRC!)
- etc....To request more information, please visit our Literature Request Page
|
|
Shaped carbide, either discs or stars, are brazed
onto drilling tools that are used to cut steel casing or
to help remove down-hole junk.
|
|
|
The MDSS "Long Multi Drill" is special designed for deep hole drilling e.g. for crankshaft machining. Cutting temperature, chip removement, strength and geometry of the drill and so called minimum quantity lubrication (MQL) have big influence to cutting process. Especially this MQL enables this carbide twisted drill to make deep hole drilling, whose L/D is more than 15, as short chips are generated by MQL. Our Long Multi Drill has a ZX coated chip generating area and a new designed chip removal area.
|
|
hydra 5D
two screw and one screwdriver are included with a drill body
d1Inch d1mm d1decimal Inch l2mm l1mm
15/32 11.91 0.4688 69 130
12.00 0.4724 69 130
31/64 12.30 0.4844 69 130
12.50 0.4921 74 140
1/2 12.70 0.5000 74 140
13.00 0.5118 74 140
|
|
|
Solid Carbide Drills in Jobber Length...Fast Sprial...Three Flute...Straight Flute...Flat Drills...and Conbide Drill and Countersinks. Fractional and Metric Sizes
|
|
WhizIn, another revolutionizing patented product developed by WhizCut, is designed to improve productivity of internal applications. It has been specially developed for small diameters in internal turning applications, and is unlike anything else on the market.
The WhizIn tool holder has the carbide bar mounted at an angle to achieve the maximum stability for a set diameter. By grinding away less from the base of the insert, the insert becomes more stable. Other benefits are less grinding time and grinding stress and that the coolant may go through the tool holder and spray directly on to the cutting zone.
|
|
|
A boring tool is usually a modular tool, consisting of a basic holder, adapter and a cutting unit in the form of a cartridge, slide or fine boring unit. A fine boring head holds a boring bar or cartridge. A reamer has a tool shank and a close pitch head with brazed blades. The tools, except the reamer, are radially adjustable within a specific diameter range.
|
|
CTW TM Technology
The geometry has been developed to incorporate CTWTM (Continuously thinned web ) Technology. This means that when the user re-point grinds the drill, the resultant point is already thinned.
|
|
METRIC SIZES from 3mm to and including 16mm
SGS Tool Company adds to its High Performance Drill line with the introduction of Ice-Carb, an Internal Coolant Drill for drilling depths up to 7 x Diameter.
ICe-Carb%u2019s unique geometry features enhance coolant flow and chip removal. Each tool comes with SGS%u2019 exclusive Ti-NAMITE-A (AlTiN) tool coating for higher thermal stability and greater wear resistance in deep hole drilling.
The tool%u2019s drilling depth potential eliminates the need for pecking in most applications and the corner protection increases tool life.
|
|
CoroDrill Delta-C R846
Sandvik Coromant has developed a new drill, CoroDrill Delta-C R846, for Heat Resistant Super Alloy machining in aerospace applications, such as the production of gas turbine casings. The new drill is designed for the continuous and reliable production of holes in demanding HRSA materials, which place heavy demands on the cutting edge. The geometry of the new CoroDrill Delta-C is optimised for maximum efficiency in repeat short hole drilling. The new cutting edge has a more consistent curve for added strength in the outer corners where cutting forces can be highest in demanding applications. This distributes the cutting forces evenly over the cutting edge – giving an even wear without sudden changes.
CoroMill Plura
The CoroMill Plura solid carbide endmill family covers most milling applications from roughing to superfinishing, keyslot milling and chamfering.
The endmills are designed with several length options to maximise productivity from short to long reach. They are supplied in diameters from 0.4 - 25 mm and also available in an multi-edged version for super finishing and a spherical version for optimised accessibility.
CoroMill Plura endmills are supplied in three different carbide grades covering wet and dry milling in steels, stainless steels, cast iron, heat resistant super alloys, hardened materials as well as aluminium.
|
|
|
Straight Flute...Common Shank...Right Hand Cutting... Solid Carbide Reamer...Diameters in Fractional, Metric, and Decimal
|
|
BENEFITS:
- 2xØ and 3xØ for all sizes
- Large, reinforced helical flutes.
- Through tool coolant
- KAB6 connection for drilling all diameters up to 2 1/2" on 40 or 50 taper machining centers.
- Standard WCMX carbide inserts
- Coolant inducers and adjustable holders standard.
|
|
Sandvik Coromant's drilling programme offers a wide range of high performance drilling products.
Regardless of the hole style - we can offer you the right tool for the best productivity in a wide diameter range. Both solid carbide drills and indexable insert drills are available.
CoroDrill® 880
When Sandvik Coromant recently introduced CoroDrill 880 it was perceived as a giant leap in short hole drilling. The Step Technology made the first indexable insert drill with perfect cutting force balance wich will substantially improve production economy in holemaking. Up to 100% higher feed rate and closer tolerances are achievable.
CoroDrill® 800
Sandvik Coromant also offer drills for deep holes up to 150 times the diameter in a wide diameter range in the Ejector and STS systems. Double your productivity with the new unique CoroDrill 800.
With Tailor Made and Special drills included the programme offers unlimited possibilities.
|
|
feedMAX - Solid Carbide Drills
Highest productivity with Seco solid carbide drill. Due to the new superior quality drill Seco can help you improve your productivity by as much as 100%. Saving money and time. feedMAX offering drills in diameter range 3-20 mm. The self-centring geometry gives quality holes without pre- or finishing operations necessary. The low friction TiAlN coating secures good performance in a wide range of materials as well as an exceptional tool life. The high productivity together with the long tool life gives excellent total machining economy when using feedMAX solid Carbide drill.
Brazed Carbide Tipped Drills
Brazed carbide tipped drills in diameters 9,85-32,10 mm for drilling quality holes without any finishing operations. Self centring geometry with a TiN coated P25 micro grain carbide gives good chip control and tool life in most workpiece materials.
Coolant through the drills for safe chip evacuation.
Seco CrownLoc
Drill precision holes at low cost in the hole diameter range from 12 to 25,99 mm with Seco CrownLoc. The exchangable crowns cut all your regrinding costs. With every change of crown, a new one guarantees long and predictable tool life. Exchangable crowns also allow for high cutting speeds reducing machining cost. Optimised geometries for different workpiece materials; steel, stainless steel and cast iron, complete the advantages with the CrownLoc system.
Perfomax Indexable Drills
The Perfomax range of indexable drills, in diameters 15-80 mm, is based on long experience and the very latest technological advances in drilling. Strong square inserts for good machining economy, a rigid drill body and good chip flow enable the drills to handle high metal removal rates. The drills can be used both in rotating and non-rotating applications. A unique chip path configuration reduces noise and vibration. Drilling depths from 2 x D to 5 x D.
|
|
Sandvik Coromant's drilling programme offers a wide range of high performance drilling products.
Regardless of the hole style - we can offer you the right tool for the best productivity in a wide diameter range. Both solid carbide drills and indexable insert drills are available.
Sandvik Coromant also offer drills for deep holes up to 150 times the diameter in a wide diameter range in the Ejector and STS systems. Double your productivity with the new unique CoroDrill 800.
With Tailor Made and Special drills included the programme offers unlimited possibilities.
|
|
- Maximizes cost savings by eliminating step drilling for deep holes
- Reduces cycle times up to 15 times over gun drilling
- Reverse web taper for maximum chip removal
- Ultra-smooth surface treatment aids in chip removal
- Coolant-thru
- TiAlN coated for long tool life
The FTO-GDXL is capable of non-step drilling up to 30 times diameter! By eliminating step drilling, cycle times are reduced up to 15 times over gun drilling.
FTO-GDXL Drills are coolant-thru and feature a reverse web taper, ultra-smooth surface treatment, and OSG’s special TiAlN coating, all contributing to efficient chip removal in deep holes. The new drill is available in sizes ranging from 2.5mm (0.098”) to 20mm (0.787”) in diameter.
These drills are capable of working in a wide variety of work materials. In trial applications, cost savings over traditional gun drills are most often measured in thousands or tens of thousands of EURO.
To request more information on this product, please visit our Literature Request Page
|
|
The CoroDrill 805 makes it possible to drill deep holes without moving the workpiece to a dedicated deep hole drilling machine i.e. all operations can be completed in one set-up.
Deep holes can be performed with high productivity and reliability achieving a hole quality comparable with traditional deep hole drilling. Another advantage is that no extra pump capacity is required.
CoroDrill 805 carries the same standard inserts as CoroDrill 800.
Deep holes are defined by a high ratio between hole depth and hole diameter. Deep hole drilling is the preffered method for drilling hole depths of more than 10 x the diameter up to 150 x diameter. Sandvik Coromant are a world leading manufacturer of deep hole drilling systems.
|
|
CoroPlex™ MT
By introducing the multifunctional CoroPlex™ MT Sandvik Coromant establishes a new standard that is of outmost user benefit for operations performed with the latest of machine tool technologies.
CoroPlex MT is a combination of two winning concepts in one – CoroMill 390 and CoroTurn 107. It is either applied rotating as an effective tool for milling applications – or indexed in a number of optional positions for stationary turning using two different CoroTurn 107 inserts.
Sandvik Coromant´s multifunctional tool CoroPlex MT is designed for practically unrestricted use of all the insert positions possible without support of any extra software. Although CoroPlex MT is dedicated for Multi-Task machining it is easy to use the tool in somewhat older machines working with the software capacity limited to conventional standard cycles.
CoroPlex™ MT is an innovative multifunctional tool for finishing the workpieces in a single set-up with reduced downtime on the machine. It also completes together with CoroPlex TT twin tools, with two inserts in one holder giving the possibility to change operations momentarily, and CoroPlex SL mini-turret, with four turning tools in one, the dedicated tooling Sandvik Coromant provides Multi-Task machining.
|
|
A boring tool is usually a modular tool, consisting of a basic holder, adapter and a cutting unit in the form of a cartridge, slide or fine boring unit. A fine boring head holds a boring bar or cartridge. A reamer has a tool shank and a close pitch head with brazed blades. The tools, except the reamer, are radially adjustable within a specific diameter range.
Sandvik Coromant now introduces CoroBore 820, a unique addition to its boring tool programme.
CoroBore 820 is a new solution for high productive boring preferably in roughing operations. The boring range is 35 - 260 mm and the boring depth is up to 4 x diameter. It is designed for internal coolant supply.
Three cutting edges allow a higher penetration rate with maintained tool life. A comprehensive programme of tool bodies, slides, shims and cutting inserts allow CoroBore 820 to be configured to suit the widest possible range of applications.
CoroBore 820 in combination with Duobore makes a highly productive team for rough boring from Sandvik Coromant.
|
|
BoreSTAR out-performs any other kit when it comes to range, rigidity, accuracy and repeatability.
The BoreSTART kit is fast and simple to use (no spacers or complicated set-ups) but is extremely rigid and accurate. It is dial adjustable in increments of 0.0001". Range is from .314" to 6.69" (8mm to 170mm)
|
|
ZX Modular Boring Tools (MBT) offer versatility and economy when machining bores, counter-bores, tapers, threads, and complex contours inside components, over a wide range of diameters. These tools offer the highest cutting speeds and material removal rates available.
The MBT series is available in single-slide (MBT-S) and twin-slide (MBT-T) versions. All MBT tools feature 2:1 actuation ratio for easy programming.
|
|
Designed with a length to diameter ratio of approximately 4-1/2 to 1 , this line of carbide boring tools features set-screw flats that position the cutting edge on exact centerline when used in a Criterion Boring Head.
They are available in two all-purpose grades of carbide - the ABT tools are a grade C-2 and are used on cast iron and all non-ferrous materials. The SBT tools are a grade C-6 and are intended for use on steel and other continuous chip materials. For the correct grade for your particular job we suggest you contact your carbide supplier or you may refer to the comparison charts found in most carbide catalogs.
Carbide Boring Tools with minimum boring diameters of 1/8, 3/16 and 1/4 feature a solid carbide neck and head.
|
|
ENGINEERED HARDFACING :
Shaped carbide, either discs or stars, are brazed
onto drilling tools that are used to cut steel casing or
to help remove down-hole junk.
|
|
|
|
