|
|
OBO presents a complete range of connection and fastening systems. With a product range extending from junction boxes, cable glands, flange clamp systems, clips and rail systems to screw and drive systems.
New at OBO: the conversion of the Pg system previously standard in Germany into the internationally standard metric system. The changes essentially affect the product areas of electrical installation pipes, cable glands and line passages, cable junction boxes, installation boxes, distribution housings, domestic connection and terminal boxes, switch cabinets and housings.
An interesting product innovation at OBO is the Quick-Pipe, the clever OBO pipe system. Quick-Pipe, which closes automatically with a twist, combines the benefits of closed pipe and open line installation.
|
|
Rack & Panel Mount Connectors with Hermaphroditic Contact System
Features:
- UL Recognized
- .150" (3.81mm) Contact Spacing X .130" (3.30mm) or .150" (3.81mm) Row Spacing with Staggered Gold
- Plug and Receptacle in 20, 38, 56, 90 or 120 Contact Sizes
- EDACON Hermaphroditic Contact Mating Design
- Contact Termination Options include Crimp, P.C. Tail, Wire Hole and Wire Wrap
- Mating and Unmating Simplified by use of Actuating Screws
- Optional Covers with Side or Top Entry Cable Clamp in Plastic or Mateal Material Available for all Connector Sizes
- Versatile Metal Cover Design Permits Assembly or Disassembly after Cabling is Complete plus Cable Entry Style Flexibility
- Actuating Screws, Locknuts,Polarizing Hardware, Covers and Contacts Suitable for either Plug or Receptacle
- Polarizing Hardware Adjustable for 288 Mating Combinations
|
|
|
Connections are often the weak point in ground circuits, especially if they are subjected to high currents and corrosion. The capacity of a grounding circuit to protect property and personnel depends on the quality of its connections. Only the CADWELD exothermic system can provide the permanent, low-resistance connection needed to create a long-lasting, reliable grounding network.
|
|
EN60320 inlets range from Bulgin Components is specified for use in all types of electrical equipments, and has an impressive list of international approvals.
The standard range offers one of the most comprehensive range of the market.
Variants offered include: flange and snap-in type, PCB mounting, fused inlets, with or without filters, hot condition types, and inlets with integral suppression and capacitors.
To complement the range, appliance outlets to IEC320.2.2 are available with various mounting options and termination styles.
Mating connectors in rewirable and cordset form complete the range.
|
|
- EPIC Connectors are the choice quick connect and disconnect technology for all power and control connector applications where reliability and durability are key requirements.
- EPIC Connectors are used in many electrical applications ranging from main frame computer systems to machine tool panel control.
- Now Available With NPT Threads
|
|
3M™ Electrical Connectors
The best connectors do more than fit your application; they also fit your hand, and they feel good to use. At 3M, we design connectors that are as comfortable and easy to use as they are dependable. Our complete line provides a wide range of connector choices. Simply choose the connector that fits your personal preference, as well as the application. We give you plenty of choices.
Start with the unique 3M™ "Performance +" Wire Connectors. See just how easy it is to work with three sizes instead of seven, and still cover the entire 600-volt copper wire range. The Scotchlok™ connectors are our original color-coded line of wire connectors designed with the exact features requested most by electricians. 3M wire connectors are durable for regular or low-voltage systems in construction, industrial, maintenance, OEM or irrigation. Highland™ wire connectors offer an affordable alternative with no compromise to quality. Our 3M™ Direct Bury products splice and effectively moisture-seal two or more conductors for remote-control circuits in irrigation and landscape lighting systems. 3M™ Scotchlok™ Lugs and Connectors are crimp connectors for power cable conductors. These connectors are used when splicing and terminating power cable.
|
|
gesis® - one name, one idea, an unparalleled success story! With its pluggable electrical installation system Wieland has been the unchallenged market leader for 30 years. No wonder since time savings of 70 % and cost reductions of 30% still speak for themselves.
The benefits of the "plug & play" principle apply everywhere: cutting to length, stripping and clamping are matters of the past, for the gesis® system components are industrially pre-assembled and tested. Everything fits perfectly and simply has to be plugged together on site. gesis® is the standard for safe and error-free installation.
The gesis® system comprises connectors, radio-controlled switching devices, devices for remote building automation and pluggable distribution boxes for modern facility management, cables and busbars as well as low-voltage systems.
|
|
- No minimum order quantities
- Same day shipment on in-stock products
|
|
Our industry knowledge coupled with our understanding of the design requirements, parameters and specifications enable us to develop standard and custom solutions quickly and cost effectively. Greene, Tweed focuses on dependable components for any possible operating condition. Most systems count on the reliable communication of power and data through connectors and other electrical components. Building on and working with our expertise in material selection we provide improved dependability for electrical connectors that function seamlessly in critical applications.
Our series of Seal-Connect® electrical connectors not only stand up to the extreme conditions of downhole and subsea environments but also provide superior reliability in challenging medical and biotechnology applications.
|
|
FAST AND CENTRALISED ON-SITE CONNECTION OF YOUR ENERGY CIRCUITS FOR PROCESS AND MAINTENANCE EQUIPMENT.
- compressed air
- cooling fluids
- industrial vacuum
- electricity
To satisfy your requirements in terms of simultaneous connection of air, cooling fluids and electricity, Stäubli has developed the Combitac programme.
CENTRALISED CONNECTIONS FOR MORE PRODUCTIVITY AND BETTER SAFETY.
With the Stäubli CombiTac system, you connect and disconnect your air, cooling and electrical circuits in a single motion with no crossed connection: you save time and improve safety.
COMPLETE AND TAILORED SOLUTION TO FULFIL YOUR NEED
The CombiTac programme, offers you:
- on one hand, complete pneumatic system designed by our R&D department.
- on the other, a wide choice of module units to enable you to configurate the CombiTac solution the best suited to your application.
|
|
The electrical connection of sensors via connectors has become more and more important in the last few years. Easy handling as well as high uptime of the machine are paramount for the customer and require high-quality and reliable products.
Due to the large variety of sensor designs ifm electronic supplies a wide standard range of high-quality products covering the families M8, M12, M18 through to the valve connectors.
The M12 design in particular has become firmly established on the sensor market for many years and is therefore the preferred choice for extremely harsh applications.
To be able to meet the different application requirements three product series have been developed with the following application focus.
|
|
| ... products without technical information |
| |
Pressfit Power Taps with Screw Mount and Angled Slip-on Terminals
10 pin
Pressfit Power Taps with Screw Mount Terminal
6 pin
10 pin
Solder Power Taps with Screw Mount Terminal
6 pin
10 pin
|
|
G12 - 12 Module Solution
Easy Glide Docking
* Provides an easy way of guiding a fixture into position prior to engagement
* Runners along the platform provide a smooth-sliding action
* Ideal feature when using large scale fixtures
Tabletop Configuration
* The tabletop configuration allows the S6 and G12 to be mounted to any horizontal surface
* Rear covers are available to protect wiring from the receiver to the test equipment
QuadraTrack™ Engagement
* Engaging Mechanism in the form of a pair of slotted steel slides located in the Receiver
* Distributes uniform pressure to four points on the ITA during engagement and disengagement
* Precise signal integrity between the Receiver and ITA is maintained by QuadraTrack™ engagement system
Slide Configuration
* The Slide Kits for the S6 and G12 allow access to test instrumentation and wiring
* Multiple Accessories are available for this configuration such as the Cable Tray and the Keyboard Tray Kit
|
|
This new concept of modular power connection allows a variety of applications, specifically adaptable to all users.
The wide range of current ratings available (40 to 1000 A) as well as the different levels of watertightness and shielding possibilities, offer connector solutions to numerous applications such as traction motors, converters, transformers, intercar power lines ...
|
|
The newly developed GES RJ45 module for Heavy Connector Housings enables Ethernet connectivity with the proven durability of industrial connectors. The RJ45 module ensures simple wiring of Industrial Ethernet components with excellent protection against electromagnetic fields, moisture, dust and mechanical influences. The module was specifically designed to withstand the rigors of the harsh industrial environment. This module provides the rapid enhancement of Fast Ethernet connections to any equipment utilizing the Modular Connector power/control system, at <=100 MBit/s transmission rate.
Find more information on the datasheet and on www.ges-electronic.de
|
|
F4 - The smallest pitch (0.4mm) and lowest mating height (0.9mm) available
This series for board to fpc board connection has a pitch of only 0.4mm and a height of 0.9mm. Despite its small size, the connector includes spring-elastic contacts and a locking mechanism.
|
|
|
wiecon PC board terminals are a fixed component in innumerable innovative applications. Whether with screw or spring clamp connection, pluggable or in solder version - wiecon can be found wherever control systems are required. Unique marking, effortless wire connection and intelligent test functions guarantee service-friendly usability and reliable connections.
|
|
| ... products without technical information |
| |
Our pneumatic AirLiquid PN-Module has been improved for use with liquids. Sealing material is Viton (FKM / Fluorcarbon rubber) providing high resitance against oils, gasoline, diesel, biodiesel or ethanol. The Module is available with one or two pneumatic nipples. Brass-valves, locked on socket side, ensure reliability, efficiency and high mechanical firmness within the durable industrial environment. GES can provide three versions of this module, including locked valves on both sides and a push/pull hose-connection mechanism for rapid connection/disconnection. With increased perfomance for the same price the AirLiquid PN-Module now replaces our past Pneu-Module.
Find more information on the datasheet and on www.ges-electronic.de
|
|
|
|
see the results for the following category
