|
|
The Oven of Air Forced Circulation DYCOMETAL is conceived to can satisfy the present requirements in the matter of Resistance Tests to the Temperature of any element. Its closed air circuit system guaranties a correct stability and uniformity of the temperature allowing a best use of all the compartment with the consequent advantages that this represents.
Its characteristics, guarantee and robustness let it give a high precision and a big functionality to high temperatures with a low cost.
Range of Temperature from Ambient to 200ºC/ 250ºC., and as an Special Oven, it is possible to manufacture to 350ºC/ 400ºC.
Our Ovens,through Kit in option, are ready to can realize Accelerated Old tests BURN-IN or with Artificial Light SUNLAMP (Ultraviolet Radiation Lamps, night/ day Tests, ...).
|
|
Heating ovens and drying ovens for
laboratory and production department, series VTU
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
Heating ovens and drying ovens for solvent-based
materials as per EN 1539, series VTL
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
|
|
|
The LBB pass through features a combination of horizontal and vertical airflow that offers excellent temperature uniformity at a moderate price. It is recommended for a variety of laboratory and production applications including drying and curing.The LBB is designed and manufactured to provide years of dependable service. Corrosion-resistant stainless steel interior and nickel plated shelves clean up easily. The motor is permanently lubricated and virtually maintenance free. And Despatch warrants the heater performance for a full five years - the best warranty in the industry. Every LBB oven is UL and C-UL listed, and receives a thorough performance test before shipping.
|
|
|
|
|
|
Fan-assisted digital electronic sterilizers.
Forced air convection operation
Working range: from +°C above ambient T to +00°C
MAXIMUM TEMPERATURE +300°C
T stability: <±1°C compared to all set point values.
This sterilizer is recommended for all laboratories dealing with devices and products sterilized with hot air: hospitals, analysis laboratories, food and pharmaceutical industries, research centres, etc.
Internal chamber and shelves in glossy AISI 0 stainless steel, external cabinet in brushed AISI 0 stainless steel sheet. Therefore, high mechanical characteristics, good resistance to corrosion and extremely easy cleaning. Each appliance is equipped with racks to position AISI 0 perforated stainless steel shelves (therefore height-adjustable). Internal architecture suitable for creation of a controlled air flow, by means of centrifugal blower: this ensures an optimum internal T distribution inside the chamber and therefore an optimum temperature uniformity, as well as accelerating drying operations. Door equipped with closure with lock and key. Sealing in silicone rubber, for high temperatures, long lasting and easy to clean and replace. W07AC and W08AC models have wheels (front wheels with brake) equipped standard. Insulation with special reinforced mineral fibre panels for high temperatures. Asbestos free. The efficiency of the thermal insulation ensures low temperatures on the outer surfaces and low energy consumption.
|
|
Our U Universal ovens are so varied that almost every customer application can be covered by them. Choose from: 8 model sizes (14l to 749l); 3 performance classes Basic/Excellent/Perfect; Natural convection or forced air circulation N/F.
In accordance with the Law on Medical Products (Directive 93/42/EEC), the UFE / UFP appliances can be used to warm up non-sterile cloths and covers.
|
|
With short heating up times, high precision temperature control and turbo drying, the VO vacuum ovens show off all their power - at the same time they treat heat- and oxygen-sensitive substances and materials with incomparable care. The direct contact between the load and the heatable and removable thermoshelves ensures rapid and equal heating up without thermal loss. Your decision criteria: 3 model sizes (29l, 49l and 101l); State-of-the-art control technology based on the P performance class for all models; Anti-splinter, VDE-tested door construction for all models.
Each of the maximum four (model size 29l: maximum three) insertable thermoshelves is equipped with a separate large area heating and its own sensors. The control circuits react precisely to differences in load and humidity. In this way all levels used remain equally at the predefined set temperature.
|
|
Microwave heating and drying cabinet,
type VHM HEPHAISTOS
The newly developed microwave system, VHM HEPHAISTOS, is an internationally patented system and characterised by a very high field homogeneity.
The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance.
Advantages:
Reduction of production costs due to shorter heating, process and cooling times compared to conventional methods. Use of metal parts (e.g. metal tools and charging systems) possible in the microwave field
Specific volumetric heating of products; the furnace chamber itself is not heated
Sizes from laboratory up to large scale (e.g. aircraft industry) are available (working chamber volume of the shown systems 750 and 4200 ltr); other sizes upon request
Broad spectrum of use
Technical Data
Nominal temperature: 400 °C
Heating: microwave
Control system: S!MCON/32-Net
|
|
· Definition : natural convection electrical oven for all applications.
· Construction : stainless steel interior, height-adjustable shelf supports, with epoxycoated exterior.
· Insulation : rock wool insulation of all surfaces, including door.
· Aeration : aeration device with side-mounted, adjustable, air outlet.
· Heating : battery of shielded electrical resistors.
· Electricity : single-phase 230V, 50Hz.
· Regulation : 1 thermocouple with digital temperature controller, programmable timer, RS-232 port, safety thermostat.
· Documentation : certification CE and operating instructions in English.
· Delivered with : 2 shelves.
|
|
the latest generation with innovative technique and future-oriented design
use of environmentally friendly materials and refrigerants
service-friendly construction
simple user-friendly operation
optimized parameters for highest testing precision
|
|
Rotary drying curing oven (Turntable Ovens)
This concept of a turntable oven with simplified and economic mechanization, allows the parts or materials to be recycled to the position of loading and unloading.
These designs and custom-made constructions from 40°C up to 400°C facilitate your establishment on site.
Several independent heating zones and integrated cooling possible.
Manual loading and unloading at the same position with operator's safety provided by virtual guardrails, doors or bi-manual controls.
Automatic loading and unloading by robot or manipulator with a positioning accuracy ensured by indexing mechanism. Very fast transfer time to operator or robot.
|
|
|
|
|
|
LCC/LCD Stackable Clean Process Oven
Despatch's LCC and LCD Stackable Clean Process Ovens have a stainless steel interior and exterior, rugged, programmable process controls and provide a variety of tailored options for your specific needs. For production environment processes where minimal contamination is essential, the LCC and LCD Series ovens offer the highest standards in HEPA filtration. Re-circulated airflow is 100% HEPA filtered for operation at ISO Class 5 (Class 100) or better within the oven chamber. Typical applications for these ovens include die-bond curing and other semiconductor packaging processes, depyrogenation, sterilization and drying for life sciences. The ovens are SEMI S2 and CE compliant for universal acceptance and configured for 220/240 volts and 50/60 hz.
These units are stackable to save valuable floor space. The recirculation motor is mounted at the rear of the oven, providing convenient access and allowing up to three ovens to be stacked on top of one another.
It is available in two different atmosphere configurations:
Air Atmosphere - A forced exhaust fan is included on the air temperature unit for rapid cooling.
Inert Atmosphere - Allows nitrogen (or other inert gas) to be injected into the chamber to lower the oxygen level to prevent oxidation of products. A water cooling coil is provided for rapid cooling. Control of nitrogen flow and water cooling is programmable through the Protocol Plus™ controller.
|
|
· Definition : electric oven for all applications requiring work under vacuumed atmosphere.
· Construction : cylindrical stainless steel interior, with anodised aluminium shelves, and door with tempered glass view port.
· Insulation : rock wool insulation of all surfaces, including door.
· Vacuum : frontal air intake, vacuum achieved with sealing valve. Pump sold
separately.
· Heating : heating elements surrounded working chamber.
· Electricity : single-phase 230V, 50Hz.
· Regulation : 1 thermocouple with digital temperature controller, programmable timer, RS-232 port, safety thermostat
· Documentation : certification CE and operating instructions in English.
· Delivered with : 2 shelves
|
|
Despatch Truck-In/Walk-In ovens ideal for industrial and clean process environments
The Despatch TA Truck-In/Walk-In Ovens are designed to provide process versatility, reliability and consistency in aging, drying, curing, bonding, finish baking and heat-treating applications. These ovens have been used throughout the world. Well suited for use in rugged, industrial environments as well as in clean rooms, these ovens operate at up to 650º F and are ideal for applications that require tight temperature tolerances or uniformity. Despatch’s design, manufacturing, quality and innovation ensure industrial ruggedness, excellent process control, and dependable operation. To learn more please visit us at www.despatch.com or call our Product Specialists at 1-800-828-9903 Int'l 1-952-469-5424.
|
|
|
|
|
|
Gullco stationary electrode ovens provide efficient dry storage for electrodes and wire reels. The six sizes are scaled to meet the needs of any shop. (10lbs.– 1000lbs)
Gullco portable electrode ovens are ideal for shop or field use. six models are available to suit any requirement. All are light weight, durable, and easily carried to the welding site. They are insulated for accurate temperature control and efficient operation. Each welder can carry only the electrodes required for the job. All models are equipped with rod lifters to simplify loading and unloading of electrodes. The Dry-Pak® is a tightly sealed thermal container which holds oven conditioned electrodes below AWS or ASME moisture levels for more than twenty- four hours. It does not require electricity! The other portable ovens operate on 115 or 230 volt power. Choose one model or an assortment of models to suit a job or shift length.
- Eliminate the risk of costly rework and rejects
- Ensure consistent physical properties and X-ray quality welds
- Protect Low Hydrogen quality in electrodes and flux core wire
- Protect coatings on Aluminum, Bronze, Cast Iron, Stainless and other
electrodes
- Prevent electrode wastage
|
|
|
Industrial drying ovens of drying of 100°c with 500°c. A whole standard range of 20 liters to 2000 liters.
|
|
Type YOU 60/60
With a good capacity of filling, it occupies little place and has a performance higher than the classical devices of laboratory.
They are the great advantages of YOU 60/60.
Short durations of heating, briefs drying cycles via a guidance of optimal air and a renewal of important air as well as a remarkable homogeneity of the temperature in all useful volume, represent only some of the characteristics of this apparatus.
Useful volume: 216 liters
Range of temperature: 200°C
Guidance of the air: vertical or horizontal (TUH)
|
|
The VFT 60/90 is an explosion-proof drying oven of drying. The apparatus is heated with electricity its principle rests on the principle of the forced fresh air. From reduced dimensions of its obstruction outside, it not only is very well adapted for the production, but also for work of laboratory. The advantages the such almost unlimited capacity of combustible material filling and, the aptitude for solvents of the classes of temperature T1, T2, T3, T4 belonging to the groups of explosion IIA and IIB as well as the remarkable homogeneity of the temperature in all useful volume represent some points among others which make it interesting.
|
|
|
|
|
|
Type VFT 60/90
Model VFT 60/90 is an explosion-proof drying oven of drying. The apparatus is heated with electricity and works with 100% of new air inlet permanently.
From reduced dimensions of its obstruction outside, it is very well adapted for the production, but also for work in laboratory.
With an almost unlimited capacity of combustible material filling it is adapted for solvents of the classes of temperature T1, T2, T3, T4 belonging to the groups of explosion IIA and IIB
Useful volume: 300 liters
Range of temperature: 200°C
Classes of temperature: T1, T2, T3, T4
Installation of the apparatus: Zone 2
Range VTUW
The quantity of combustible materials to put in these drying ovens of drying is almost unlimited.
These apparatuses can be installed in the zones E.G. 1 and 2 since the volume of foul air is supervised in a permanent way.
What eliminates the risk from an explosion. The VTUW is particularly adapted to solvents for the classes of temperature T1, T2, T3, T4 appropriate to the groups of explosions IIA and IIB. With these apparatuses, one can use coolants coming from other installations e.g.: warm water or vapor.
Useful volume: 700 - 3125 liters
Range of temperature: 20°C - 200 °C
Classes of temperature: T1, T2, T3, T4
eil: Zone 1 and 2
|
|
Type YOU 60/60
With a good capacity of filling, it occupies little place and has a performance higher than the classical devices of laboratory.
They are the great advantages of YOU 60/60.
Short durations of heating, briefs drying cycles via a guidance of optimal air and a renewal of important air as well as a remarkable homogeneity of the temperature in all useful volume, represent only some of the characteristics of this apparatus.
Useful volume: 216 liters
Range of temperature: 200°C
Guidance of the air: vertical or horizontal (TUH)
Range VTU
The drying ovens with pulsated air are available in 7 volumes with rich equipment and have a broad choice of accessories.
Trays, grids, plates.
Carriage of loading.
Filter fresh air.
Carry to port-hole.
Etc...
Useful volume: 200 - 8000 liters
Range of temperature: 250°C, 300°C and 350°C
Guidance of the air: horizontal
|
|
GBC FE oven for welding electrodes drying & storage.
Temperature range from 0° C to 400° C, with completely automatic programmable drying or heating cycles, power from 1700 W to 6000 W.
Load capacity up to 300 Kg.
High insulation and safety grade guaranteed by door latch avoiding any accidental door opening while temperature is in danger range for operator.
Supplied with internal separate shelves for accommodation of different welding electrodes size and compound.
|
|
Where autoclave curing is not required, Aeroform have perfected their precision temperature oven technology in conjunction with the control systems developed for the autoclaves, providing gas and electric ovens of unparalleled performance, to any size with temperature ranges currently up to 600°C
|
|
Laboratory-vacuum drying cabinet with safety hood and glove box connection for Laboratory-vacuum drying cabinetgentle drying of active substances:
* CIP-compatible
* Gap-free interior construction
* Halarized product trays
* Drip-free thermal oil supply
* Conductive transport rollers suitable for pharmaceutical applications
* Completely bonded insulation and welded chassis
* Doors can be hinged on left or right sides
* Special pivot arm for opening door in glove box mode
* Inflating seal on safety hood and glove box
|
|
drying oven
Standard configuration with internal chamber, supporting frame and external cabinet made of S. S. AISI 304 (upon request, the internal chamber can be made of S. S. AISI 316).
Drying temperature up to 100°C, with tolerance lower than +/- 3°C on the fixed set-point.
Heating by means of electric heaters or steam battery
Group of electric heaters with variable current intensity for easy internal temperature control
Filters on the external air intake for wet air ejection with filtration degree ASHRAE 85% DOP.
Sturdy loading footplate with stainless steel tilting chute for introduction of trolleys
Stainless steel trolleys and trays for product loading
Scotch-brite finishing.
|
|
Universal drying ovens LHT with stainless stell housing. Options: Tmax: 300°C, air circulation, glass door available (Tmax. only 220°C), program controller.
Vacuum Ovens LHT Vac. Tmax. 200°C. Vacuum min. 2mbar, partial pressure control 10-1100 mbar. Separately heated trays with temperature control. Electronic temperature and pressure control with display. Option: different pumps, underframe with vaccum pump, additiional trays
|
|
|
The design with vertical, or as shown here with horizontal forced air circulation covers all usual application cases. Batch handling is usually conducted manually or with a feeding cart.
|
|
|
|
|
|
AUREL A206 Dryer/Curing Oven system
Description
The AUREL A206 dryer system is special designed for predrying of pastes in thick film technology.
Applications
• IR Drying of Thick Film pastes
• IR Curing of adhesives and polimeric pastes
Prior to being submitted to be firing process, substrates with screened-on inks/pastes must be predryed to evaporate the solvents.
Infrared heat is the only heating method available by which thick film pastes can be properly dryed with optimum results.
This is because infrared heat waves penetrate the material and dry the inside of the material first, then dry outwardly to the surface.
Convenction heat causes the outside of the paste to dry first forming a film through which it is difficult for the solvent within to pass.
The solvents actually become partially trapped and as they eventally are released cause cracks in the surface of the material.
Consequently the surface is irregular, resulting in reduced conductivity or inconsistent resistivity.
The new model A206 predrying oven was designed to prevent the problems outlined.
It's design criteria are based on extensive experience in thick film technology, to provide the user with a machine that assures optimum results.
|
|
|
|
|
|
The Hearson Tobacco Oven
The Hearson Tobacco Oven has been designed to meet the stringent requirements of the industry for moisture testing. The oven provides a continuous flow of pre-heated air which passes over tared sample pans for drying purposes.
The unit comprises a cylindrical drying chamber in which is placed a stand carrying 12 circular copper trays; each tray is designed to take sis stainless steel sample pans (TKE186). The top of the drying chamber is enclosed by a hinged insulated lid. In the centre of the chamber is an air distribution tube through which pre-heated air passes over the pans to facilitate the drying process.
The drying chamber is enclosed in a second, larger chamber providing a combined water reservoir and steam boiler in which is housed a copper coil. An immersion heater maintains the water at boiling point. Surplus steam is discharged from the top of this chamber to an air cooled condenser, with the condensate returning by gravity to the reservoir, thus sustaining the water level.
An electrical blower at the base of the oven passes air through the heated copper coil; it then enters the drying chamber through the air distribution tube. After passing over the sample pans, the air escapes to atmosphere via the vent provided in the centre of the lid.
The oven is controlled using fused on/off switches for both the heater and air blower. An ammeter is fitted above each switch to indicate the combined load. Air flow through the drying chamber is regulated by a valve and measured by a rotameter calibrated over the range 2 to 20 litres/min.
|
|
|
|
|
|
Standard features on all AES Chambers, including are:
* Forced air circulation systems maintain precise temperatures and use a fan powered by a direct drive, heavy duty electrical motor that is externally mounted with an integral stainless steel shaft.
* Heating systems are located in a plenum so that test items are not subject to direct radiation. Open wire nichrome resistance elements combine maximum heat transfer with rapid response time and long operating life.
* Fail-safe high-temperature control guards against damage due to abnormal high temperature extremes.
* Fusible thermal links guard against temperatures exceeding the upper design limits of the equipment.
* Non-magnetic welded type 304 stainless steel inner chambers.
* Exterior cabinet of reinforced cold rolled steel with fully-welded construction.
* Textured enamel finish for a laboratory look.
* Most doors are combination hinged and removable for easy access and modification.
* Doors are gasketed with silicone to handle the expanded range of temperatures
* Door latches have a quick-action cam mechanism for positive closure.
* High density low “K” factor, non-settling fiberglass insulation is standard in walls and doors.
|
|
Fast drying of ceramic grinding wheels on metal racks. Loading and unloading by lifting truck.
MKT 30 1600/2500/5200
Special ventilation system for even drying, roller curtain door.
Microwave power: 30 kW
Useful chamber dimensions: 1200 x 2000 x 4700 mm (w x h x l)
Number of magnetrons: 38 with 800 W each
Product-ID: 72
|
|
Process Ovens
High-Heat Burn-Off & Automated Curing
Designed to meet production requirements with maximum efficiency.
Global Finishing Solutions also features an Internal Loop System - featuring air seals to minimize the amount of heated air in the oven escaping to the surrounding atmosphere.
-Shorter Curing Cycles
-Substantial Fuel Savings
-Consistent Temperatures
-Reduced Floor Space
-Fast Heat-Up
|
|
... see all the products in the category
Ovens
|
|
|
