|
|
Explosion-proof heating oven
and drying oven VFT 60/90
The VFT 60/90 is an ex-proof fresh air heating and drying oven. The oven is electrically heated and designed according to the fresh-air-principle. Due to the small floor space required it is also suitable for installation in laboratories and in production departments. The advantages, e.g. no restriction on the volume of combustible solvents, suitable for solvents with the temperature classes T1, T2, T3, T4 in the explosion groups IIA and IIB, precise temperature uniformity in the whole working chamber.
Working chamber volume 300 liters
Temperature 200 °C
Temperature classes T1, T2, T3, T4
Installation Zone 2
|
|
Heating ovens and drying ovens for
laboratory and production department, series VTU
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
Heating ovens and drying ovens for solvent-based
materials as per EN 1539, series VTL
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
|
|
Microwave heating and drying cabinet,
type VHM HEPHAISTOS
The newly developed microwave system, VHM HEPHAISTOS, is an internationally patented system and characterised by a very high field homogeneity.
The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance.
Advantages:
Reduction of production costs due to shorter heating, process and cooling times compared to conventional methods. Use of metal parts (e.g. metal tools and charging systems) possible in the microwave field
Specific volumetric heating of products; the furnace chamber itself is not heated
Sizes from laboratory up to large scale (e.g. aircraft industry) are available (working chamber volume of the shown systems 750 and 4200 ltr); other sizes upon request
Broad spectrum of use
Technical Data
Nominal temperature: 400 °C
Heating: microwave
Control system: S!MCON/32-Net
|
|
|
|
|
|
Type VFT 60/90
Model VFT 60/90 is an explosion-proof drying oven of drying. The apparatus is heated with electricity and works with 100% of new air inlet permanently.
From reduced dimensions of its obstruction outside, it is very well adapted for the production, but also for work in laboratory.
With an almost unlimited capacity of combustible material filling it is adapted for solvents of the classes of temperature T1, T2, T3, T4 belonging to the groups of explosion IIA and IIB
Useful volume: 300 liters
Range of temperature: 200°C
Classes of temperature: T1, T2, T3, T4
Installation of the apparatus: Zone 2
Range VTUW
The quantity of combustible materials to put in these drying ovens of drying is almost unlimited.
These apparatuses can be installed in the zones E.G. 1 and 2 since the volume of foul air is supervised in a permanent way.
What eliminates the risk from an explosion. The VTUW is particularly adapted to solvents for the classes of temperature T1, T2, T3, T4 appropriate to the groups of explosions IIA and IIB. With these apparatuses, one can use coolants coming from other installations e.g.: warm water or vapor.
Useful volume: 700 - 3125 liters
Range of temperature: 20°C - 200 °C
Classes of temperature: T1, T2, T3, T4
eil: Zone 1 and 2
|
|
Type YOU 60/60
With a good capacity of filling, it occupies little place and has a performance higher than the classical devices of laboratory.
They are the great advantages of YOU 60/60.
Short durations of heating, briefs drying cycles via a guidance of optimal air and a renewal of important air as well as a remarkable homogeneity of the temperature in all useful volume, represent only some of the characteristics of this apparatus.
Useful volume: 216 liters
Range of temperature: 200°C
Guidance of the air: vertical or horizontal (TUH)
Range VTU
The drying ovens with pulsated air are available in 7 volumes with rich equipment and have a broad choice of accessories.
Trays, grids, plates.
Carriage of loading.
Filter fresh air.
Carry to port-hole.
Etc...
Useful volume: 200 - 8000 liters
Range of temperature: 250°C, 300°C and 350°C
Guidance of the air: horizontal
|
|
|
|
|
|
AUREL A206 Dryer/Curing Oven system
Description
The AUREL A206 dryer system is special designed for predrying of pastes in thick film technology.
Applications
• IR Drying of Thick Film pastes
• IR Curing of adhesives and polimeric pastes
Prior to being submitted to be firing process, substrates with screened-on inks/pastes must be predryed to evaporate the solvents.
Infrared heat is the only heating method available by which thick film pastes can be properly dryed with optimum results.
This is because infrared heat waves penetrate the material and dry the inside of the material first, then dry outwardly to the surface.
Convenction heat causes the outside of the paste to dry first forming a film through which it is difficult for the solvent within to pass.
The solvents actually become partially trapped and as they eventally are released cause cracks in the surface of the material.
Consequently the surface is irregular, resulting in reduced conductivity or inconsistent resistivity.
The new model A206 predrying oven was designed to prevent the problems outlined.
It's design criteria are based on extensive experience in thick film technology, to provide the user with a machine that assures optimum results.
|
|
Fast drying of ceramic grinding wheels on metal racks. Loading and unloading by lifting truck.
MKT 30 1600/2500/5200
Special ventilation system for even drying, roller curtain door.
Microwave power: 30 kW
Useful chamber dimensions: 1200 x 2000 x 4700 mm (w x h x l)
Number of magnetrons: 38 with 800 W each
Product-ID: 72
|
|
ANCILLARY EQUIPMENT FOR EXTRUSION LINES
- PREHEATING OVEN -
Type FR1
Preheating oven; complete with temperature control
- total installed power kw 8 - total lenght mm 1000.
|
|
... see all the products in the category
Ovens
|
| ... products without technical information |
| |
|
|
|
|
Aquaciat Power
High-capacity air-cooled chiller for cooling of commercial, industrial or healthcare facilities. May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or air handling units. Designed as standard for outdoor installation without any special weather protection.
- R-410A refrigerant,
- Compact unit takes up little ground space,
- Fully encased in a housing constructed of coated metal panels that can be detached for outdoor installation,
- Two independent refrigerant circuits,
- Four to six new-generation, high-efficiency scroll compressors,
- Water-cooled brazed-plate heat exchanger,
- Six to eight propeller fans,
- User-friendly CONNECT microprocessor-based controller with many self-regulating functions,
- Total or partial energy recovery.
- Communication with BMS via an RS-485 interface (Modbus/Jbus) as standard.
Four models available
Cooling capacity: 330 to 500 kW
- LD: Without hydraulic system,
- LDC: With hydraulic system, without tank,
- LDH: With complete hydraulic system and tank.
|
|
|
|
|
|
The new Piovan Digitemp Thermorefrigerators heat and cool the process circuit of injection and blow moulding machines. They integrate both temperature control and free-cooling functions, and provide water to every single circuit at specific temperature (from -5°C to +90°C for every single circuit), pressure and water flow.
Advantages:
Significant reduction of energy consumption
The combination of compressors with digital technology and the electronic expansion valve - installed in all the Digitemp models in their standard version - ensures the greatest energy efficiency. Moreover, the exclusive Piovan solution which does not require an internal re- circulating pump further increases energy savings.
Reduced running costs
Thanks to the possibility to use the free-cooling system included in the standard unit, they can provide water coming from the dry cooler or the evaporation tower.
Ultra-compact design
With a floor dimension of only 0.4 m2 and a height of 108 cm, these models are the most compact units present on the market at the moment.
Realibility and long life
The possibility of power modulation from 10 to 100% allows the compressor to function continuously, thus eliminating the risk of breakdowns and ensuring long duration of the motor.
Maximum flexibility
The Digitemp models represent the ideal solution whenever it is necessary to manage the demands of different temperatures of every single processing machine, with no waste. Available in the single and dual circuit versions, they can be equipped with medium or high pressure pumps, which guarantee adequate water flow and thermal exchanges, in any application.
|
|
CASTALIA, the condensing absorption chiller with power modulation, (Systema S.p.A. patent-pending), for the production of cooling and hot water, can be used as a heating system in winter and as a cooling system in summer.
The installation of this brand-new product guarantees important energy savings in comparison with the traditional separated systems such as boiler and electric chiller.
CASTALIA is composed by a highly efficient premixed gas burner with modulation combined with an exchanger: the NOX emissions are very low.
There is the possibility to choose the equipment between 8 different models, with a heating capacity from 12.9 kW to 139.2 kW and a thermic performance of 107.4%.
The available cooling capacity range is 12.5 kW - 115 kW with a cooling performance of 103% that can reach 130% if we consider the energy recovery for the production of sanitary hot water.
|
|
|
|
|
|
We are glad to inform you that Systema S.p.A. has introduced in its range of products the "RENEWABLE ENERGY PACKAGE".
This complete product is an Absorption refrigerator-thermic System created for the external installation.
Its power supplyies can be:
- gas;
- hot water produced by solar concentrators and collectors;
- fume-steam heat recovery systems;
- fumes and hot water of a cogenerator.
Thanks to a cogenerator, Renewable Energy Package, becomes a CCHP system (combined cooling, heating and power) for the production of hot water, cooling water and electricity.
This preassembled OR ENBLOC package is composed by an Absoprtion Chiller, a cooling tower, a cool and hot water storage, pumps, filters, mixing valves and a control panel for the management of the complete system.
Systema S.p.A. designs, produces and commissions the Renewable Energy Package in its industrial plants.
One of the most important advantages is that our company offers a complete high-tecnology system to be installed outside, according to the particular requirements of the customer.
|
|
|
Air conditioners, based on Peltier technology, are thermoelectric units for heating and cooling of gases, mostly air. The INHECO thermoelectric air conditioner is a ready-to-install unit which is used for the cooling of control cabinets and outdoor applications. The complete unit can be easily and quickly installed and can be used without application of detrimental refrigerants. The INHECO air conditioners are optimized for use in harsh environments and are mostly certified to either ATEX or IP54 standard.
|
|
|
Air conditioners, based on Peltier technology, are thermoelectric units for heating and cooling of gases, mostly air. The INHECO thermoelectric air conditioner is a ready-to-install unit which is used for the cooling of control cabinets and outdoor applications. The complete unit can be easily and quickly installed and can be used without application of detrimental refrigerants. The INHECO air conditioners are optimized for use in harsh environments and are mostly certified to either ATEX or IP54 standard.
|
|
|
Air conditioners, based on Peltier technology, are thermoelectric units for heating and cooling of gases, mostly air. The INHECO thermoelectric air conditioner is a ready-to-install unit which is used for the cooling of control cabinets and outdoor applications. The complete unit can be easily and quickly installed and can be used without application of detrimental refrigerants. The INHECO air conditioners are optimized for use in harsh environments and are mostly certified to either ATEX or IP54 standard.
|
|
Heating ovens and drying ovens for
laboratory and production department, series VTU
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
Heating ovens and drying ovens for solvent-based
materials as per EN 1539, series VTL
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
|
|
Microwave heating and drying cabinet,
type VHM HEPHAISTOS
The newly developed microwave system, VHM HEPHAISTOS, is an internationally patented system and characterised by a very high field homogeneity.
The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance.
Advantages:
Reduction of production costs due to shorter heating, process and cooling times compared to conventional methods. Use of metal parts (e.g. metal tools and charging systems) possible in the microwave field
Specific volumetric heating of products; the furnace chamber itself is not heated
Sizes from laboratory up to large scale (e.g. aircraft industry) are available (working chamber volume of the shown systems 750 and 4200 ltr); other sizes upon request
Broad spectrum of use
Technical Data
Nominal temperature: 400 °C
Heating: microwave
Control system: S!MCON/32-Net
|
|
Type YOU 60/60
With a good capacity of filling, it occupies little place and has a performance higher than the classical devices of laboratory.
They are the great advantages of YOU 60/60.
Short durations of heating, briefs drying cycles via a guidance of optimal air and a renewal of important air as well as a remarkable homogeneity of the temperature in all useful volume, represent only some of the characteristics of this apparatus.
Useful volume: 216 liters
Range of temperature: 200°C
Guidance of the air: vertical or horizontal (TUH)
Range VTU
The drying ovens with pulsated air are available in 7 volumes with rich equipment and have a broad choice of accessories.
Trays, grids, plates.
Carriage of loading.
Filter fresh air.
Carry to port-hole.
Etc...
Useful volume: 200 - 8000 liters
Range of temperature: 250°C, 300°C and 350°C
Guidance of the air: horizontal
|
|
|
|
|
|
AUREL A206 Dryer/Curing Oven system
Description
The AUREL A206 dryer system is special designed for predrying of pastes in thick film technology.
Applications
• IR Drying of Thick Film pastes
• IR Curing of adhesives and polimeric pastes
Prior to being submitted to be firing process, substrates with screened-on inks/pastes must be predryed to evaporate the solvents.
Infrared heat is the only heating method available by which thick film pastes can be properly dryed with optimum results.
This is because infrared heat waves penetrate the material and dry the inside of the material first, then dry outwardly to the surface.
Convenction heat causes the outside of the paste to dry first forming a film through which it is difficult for the solvent within to pass.
The solvents actually become partially trapped and as they eventally are released cause cracks in the surface of the material.
Consequently the surface is irregular, resulting in reduced conductivity or inconsistent resistivity.
The new model A206 predrying oven was designed to prevent the problems outlined.
It's design criteria are based on extensive experience in thick film technology, to provide the user with a machine that assures optimum results.
|
|
Fast drying of ceramic grinding wheels on metal racks. Loading and unloading by lifting truck.
MKT 30 1600/2500/5200
Special ventilation system for even drying, roller curtain door.
Microwave power: 30 kW
Useful chamber dimensions: 1200 x 2000 x 4700 mm (w x h x l)
Number of magnetrons: 38 with 800 W each
Product-ID: 72
|
|
ANCILLARY EQUIPMENT FOR EXTRUSION LINES
- PREHEATING OVEN -
Type FR1
Preheating oven; complete with temperature control
- total installed power kw 8 - total lenght mm 1000.
|
|
|
|
see the results for the following category : 
