|
|
Temperature test chambers with forced convection and individual programming
BINDER M series:
Because of its individual programming options and ability to operate at maximum temperatures up to 300 °C, the M series is ideally suited for materials testing and aging tests. The heavy-duty air turbine and a programmable exhaust ventilation flap provide rapid heating-up and ensure that the test temperature is maintained absolutely precise at all levels, with minimal spatial fluctuations; performance as never before.
|
|
Drying ovens with natural convection
BINDER ED series:
Routine drying and sterilization applications up to 300° C and storage at precisely controlled elevated temperatures are the strengths of ED drying ovens. Because of the natural air circulation with a high rate of air exchange, thermal processes run with significantly increased efficiency.
|
|
Maximum operating temperatures of 400°C, 500°C & 600°C
Chamber capacities of 30, 60 & 120 litres
Good temperature uniformity
Fast heat up and recovery times
Polished stainless steel interior
Stainless steel shelves with multi position settings
Choice of controllers & programmers
|
|
- Applications: drying, heating, hot preservation, hot sterilization (Poupinel), ageing of components, thermal tests in laboratories and industries.
- 2 temperatures: 200°C maximum or 300°C maximum (depending on the option).
- Nine sizes: from 18 litres to 980 liters.
Several options and accessories to adapt the oven to your needs.
|
|
|
|
|
|
Fan-assisted digital electronic sterilizers.
Forced air convection operation
Working range: from +°C above ambient T to +00°C
MAXIMUM TEMPERATURE +300°C
T stability: <±1°C compared to all set point values.
This sterilizer is recommended for all laboratories dealing with devices and products sterilized with hot air: hospitals, analysis laboratories, food and pharmaceutical industries, research centres, etc.
Internal chamber and shelves in glossy AISI 0 stainless steel, external cabinet in brushed AISI 0 stainless steel sheet. Therefore, high mechanical characteristics, good resistance to corrosion and extremely easy cleaning. Each appliance is equipped with racks to position AISI 0 perforated stainless steel shelves (therefore height-adjustable). Internal architecture suitable for creation of a controlled air flow, by means of centrifugal blower: this ensures an optimum internal T distribution inside the chamber and therefore an optimum temperature uniformity, as well as accelerating drying operations. Door equipped with closure with lock and key. Sealing in silicone rubber, for high temperatures, long lasting and easy to clean and replace. W07AC and W08AC models have wheels (front wheels with brake) equipped standard. Insulation with special reinforced mineral fibre panels for high temperatures. Asbestos free. The efficiency of the thermal insulation ensures low temperatures on the outer surfaces and low energy consumption.
|
|
Vacuum drying oven for non-flammable solvents
BINDER VD series:
The VD series offers safe drying with homogenous temperature distribution, thanks to its APT.line™ air jacket system. Optimum heat transfer through patented expansion rack technology; the racks can be positioned as needed and are easy to clean. In addition to these many features, the units have an individually programmable controller.
Find out more: www.vacuum-drying.com
|
|
- Applications: moderate drying of sensitive products, heat treatments of materials being likely to oxidize, fast drying of powders and granules.
- 2 temperatures: 200°C maxi or 300°C maxi (depending on the option).
- Fours sizes: from 20 litres to 240 liters.
Several options and accessories to adapt the oven to your needs.
|
|
|
The Despatch LBB oven features a combination of horizontal and vertical airflow that offers excellent temperature uniformity at a moderate price. It is recommended for a variety of laboratory and production applications including drying, curing, annealing and materials testing.Every LBB oven is UL and C-UL listed, and receives a thorough performance test before shipping.
|
|
|
The LBB pass through features a combination of horizontal and vertical airflow that offers excellent temperature uniformity at a moderate price. It is recommended for a variety of laboratory and production applications including drying and curing.The LBB is designed and manufactured to provide years of dependable service. Corrosion-resistant stainless steel interior and nickel plated shelves clean up easily. The motor is permanently lubricated and virtually maintenance free. And Despatch warrants the heater performance for a full five years - the best warranty in the industry. Every LBB oven is UL and C-UL listed, and receives a thorough performance test before shipping.
|
|
Our U Universal ovens are so varied that almost every customer application can be covered by them. Choose from: 8 model sizes (14l to 749l); 3 performance classes Basic/Excellent/Perfect; Natural convection or forced air circulation N/F.
In accordance with the Law on Medical Products (Directive 93/42/EEC), the UFE / UFP appliances can be used to warm up non-sterile cloths and covers.
|
|
With short heating up times, high precision temperature control and turbo drying, the VO vacuum ovens show off all their power - at the same time they treat heat- and oxygen-sensitive substances and materials with incomparable care. The direct contact between the load and the heatable and removable thermoshelves ensures rapid and equal heating up without thermal loss. Your decision criteria: 3 model sizes (29l, 49l and 101l); State-of-the-art control technology based on the P performance class for all models; Anti-splinter, VDE-tested door construction for all models.
Each of the maximum four (model size 29l: maximum three) insertable thermoshelves is equipped with a separate large area heating and its own sensors. The control circuits react precisely to differences in load and humidity. In this way all levels used remain equally at the predefined set temperature.
|
|
|
|
|
|
The Hearson Tobacco Oven
The Hearson Tobacco Oven has been designed to meet the stringent requirements of the industry for moisture testing. The oven provides a continuous flow of pre-heated air which passes over tared sample pans for drying purposes.
The unit comprises a cylindrical drying chamber in which is placed a stand carrying 12 circular copper trays; each tray is designed to take sis stainless steel sample pans (TKE186). The top of the drying chamber is enclosed by a hinged insulated lid. In the centre of the chamber is an air distribution tube through which pre-heated air passes over the pans to facilitate the drying process.
The drying chamber is enclosed in a second, larger chamber providing a combined water reservoir and steam boiler in which is housed a copper coil. An immersion heater maintains the water at boiling point. Surplus steam is discharged from the top of this chamber to an air cooled condenser, with the condensate returning by gravity to the reservoir, thus sustaining the water level.
An electrical blower at the base of the oven passes air through the heated copper coil; it then enters the drying chamber through the air distribution tube. After passing over the sample pans, the air escapes to atmosphere via the vent provided in the centre of the lid.
The oven is controlled using fused on/off switches for both the heater and air blower. An ammeter is fitted above each switch to indicate the combined load. Air flow through the drying chamber is regulated by a valve and measured by a rotameter calibrated over the range 2 to 20 litres/min.
|
|
|
|
|
|
Standard features on all AES Chambers, including are:
* Forced air circulation systems maintain precise temperatures and use a fan powered by a direct drive, heavy duty electrical motor that is externally mounted with an integral stainless steel shaft.
* Heating systems are located in a plenum so that test items are not subject to direct radiation. Open wire nichrome resistance elements combine maximum heat transfer with rapid response time and long operating life.
* Fail-safe high-temperature control guards against damage due to abnormal high temperature extremes.
* Fusible thermal links guard against temperatures exceeding the upper design limits of the equipment.
* Non-magnetic welded type 304 stainless steel inner chambers.
* Exterior cabinet of reinforced cold rolled steel with fully-welded construction.
* Textured enamel finish for a laboratory look.
* Most doors are combination hinged and removable for easy access and modification.
* Doors are gasketed with silicone to handle the expanded range of temperatures
* Door latches have a quick-action cam mechanism for positive closure.
* High density low “K” factor, non-settling fiberglass insulation is standard in walls and doors.
|
|
Universal drying ovens Thermo Scientific Heraeus 6000
________________________________________________
Beyond the standard solutions
The universal drying ovens Thermo Scientific Heraeus series 6000 constitute the broadest range of the market in terms of capacity and volume.
They adapt to all the requirements, for an extreme variety of application.
Conceived to meet your specific needs, they guarantee to you:
A long run reliability
A vast choice of volumes and options
High performances
A safety without fault
From 30 with 750L, from 1 to 40 racks, 0 with 300°C, these drying ovens have the solution which is appropriate to you perfectly.
For any knowledge of the drying ovens Thermo Scientific (universal drying ovens, drying ovens for hybridization, drying ovens with mechanical convection, drying ovens with forced convection, vacuum drying ovens...), go on:
www.thermo.com/hot
|
|
Drying ovens with vacuum Thermo Scientific Heraeus Vacutherm
-------------------------------------------------
The studies Thermo Scientific Heraeus Vacutherm meet all the needs relating to the heat treatment to vacuum, which it is about process of simple routine, or of complex operations requiring of the temperatures until 400°C.
Drying carefully of thermosensitive materials
Drying in safety of flammable solvents
Time of considerably reduced dryings
Elimination of oxidation
They are available in three volumes - 25,53 and 128 L - and two models of heatings. There exists, moreover, one special version for solvents flammable.
For any knowledge of the drying ovens Thermo Scientific (universal drying ovens, drying ovens for hybridization, drying ovens with mechanical convection, drying ovens with forced convection, vacuum drying ovens...) like on the promotional offers in progress, go on:
www.thermo.com/hot
|
|
Universal drying ovens Thermo Scientific Heraeus Function Line
__________________________________________________________
The drying ovens Heraeus Function Line are the solution for your daily applications.
Storage, drying, treatment and test thermics... They ensure you performance and reliability any test.
Not very bulky, they optimizes your workspace. Their ergonomic design (corners rounded, removable racks, joined of interchangeable door) facilitates cleaning and guaranteed to you an optimal safety.
They are available in three capacities - 60,110 and 200 L - and with a vast choice of the types of heating
For any knowledge of the drying ovens Thermo Scientific (universal drying ovens, drying ovens for hybridization, drying ovens with mechanical convection, drying ovens with forced convection, vacuum drying ovens...), go on:
www.thermo.com/hot
|
|
| ... products without technical information |
| |
... see all the products in the category
Ovens
|
|
|
