|
|
LABORATORY AUTOCLAVES
Priorclave offer a choice of laboratory autoclaves from 40 to 700 litres and above, suitable for a wide range of applications.
They are available in different loading formats; Bench Top, Top Loading, Front Loading, Large Capacity Rectangular. All Priorclave Laboratory Autoclaves include the following unique features:
- TACTROL microprocessor control system, developed specifically for the control and monitoring of Laboratory Autoclaves
- Easy to use, just set the temperature and time required, select any options needed and press start.
- Self-monitoring systems, with pre-set actions for events such as power failure or low water levels and other events. A full log of autoclave activity is held in the system and can be downloaded for diagnostic or monitoring purposes
- High visibility display panel easy to set and use with digital displays providing information on status
- Optional program memory, Printer and Serial or USB connection
- Biocote® Anti-Microbial Surface Coating providing a 2nd line of defence, to minimise cross contamination risks.
- A range of options and accessories to help you to get the most from your chosen model including:
- Vacuum systems for improved air removal
- Drying systems
- Steam and water jackets (rectangular models only) for improved performance
- Baskets, Sterilising Containers, Loading Trolleys etc.
Full spares and service backup from an in-house service team and fully trained distributor technicians.
|
|
BENCHTOP COMPACT 40 PRIORCLAVE LABORATORY AUTOCLAVE
Compact Priorclaves allow flexible operation for the low volume user, usually only available in larger units.
- 40 litre capacity (up to 11 x 1 litre bottles or 7 x 1 litre conical flasks)
- Bench mounting
- More flexible than fixed cycle sterilisers for laboratory and mixed load use
- Fully settable up to 138oC – 2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory and optional Printer
- BioCote anti-microbial surface coating – unique to Priorclave
- 12 months parts and labour warranty (parts only outside the UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in sealed glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming facility
- Delayed Start facility
- Fan assisted cooling
- Timed Freesteaming
- Thermocouple port and separate test port
- Two stainless steel shelves
- Stainless basket and stainless waste container available
- Operation from standard 13 Amp socket (UK)
- Full range of options and accessories
|
|
Q63 LARGE CAPACITY FRONT LOADING PRIORCLAVE LABORATORY AUTOCLAVE
Designed to give the advantages (more difficult to overload and lower costs) of Priorclave’s cylindrical section autoclaves but with a higher capacity the Q63 autoclave is ideal for autoclaving heavy or bulky items.
- 630mm Dia. Cylindrical Chamber
- 320 Litre Capacity
- 21kW kW electric or direct steam heating
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Castor mounted for ease of positioning
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming
- Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
FRONT LOADING PRIORCLAVE LABORATORY AUTOCLAVES
A firm favourite in laboratories throughout the food, drink, dairy, health and pharmaceutical industries, these autoclaves and are particularly useful for autoclaving heavy or bulky items.
Models are available in 100, 150 and 200 litre capacities and for electrical or direct steam heating.
- 500mm Dia. Cylindrical Chamber
- 7 or 10.5kW electric or direct steam heating
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Castor mounted for ease of positioning
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming
- Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
New OPAL range of laboratory autoclaves
This entry-level, four option range starts with a 35L Bench-top model and includes 55L and 95L top loading models. A 125L Bench-top model with optional mounting stand completes the range.
They have been specifically designed to perform everyday laboratory autoclaving functions such as growth media preparation and laboratory waste sterilisation. It is intended to enable laboratories, with a more basic need, to perform these operations within their own laboratory to specific requirements, without unnecessary expenditure on additional functions and control systems often fitted as standard on today's autoclaves, for more exacting procedures.
All autoclaves in the range feature automatic free steaming and a thermal safety lock and are managed by a slimmed down version of Priorclave's tried and tested TACTROL microprocessor control system. They will operate up to 138oC - 2.4 Bar.
The models are based around Priorclave's existing product range and so are fully compliant and CE marked in accordance with the European Pressure Equipment Directive (97/23/EC) and other relevant directives and standards. |
|
RECTANGULAR SECTION PRIORCLAVE LABORATORY AUTOCLAVES
Perfect for high volume throughput as well as large bulky items, these autoclaves combine a huge internal capacity with a small floor area.
- 230, 285, 350, 450 & 700 litre capacities (Intermediate and larger capacities also available)
- Compact design – 235 and 350 models will fit through standard door
- Simple, hand wheel door closure (with patented Priorclave safety mechanism – Also available with vertical sliding door closure
- Powerful heaters for shortened cycle times
- 21, 31.5 or 42kW (380/415V) electric or direct steam heating
- Steam Jacketed versions available (steam heated models only)
- Fully settable up to 138°C–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Media Warming & Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
RECTANGULAR SECTION VERTICAL POWER DOOR PRIORCLAVE LABORATORY AUTOCLAVES
Perfect for high volume throughput as well as large bulky items, these autoclaves combine a huge internal capacity with a small floor area.
The Priorclave Hydraulic Power Door mechanism enables the door to be opened and closed at the touch of a button.
A fixed door seal is used for reliable, trouble free operation.
- 230, 285, 350, 450 & 700 litre capacities (Intermediate and larger capacities also available)
- 3 Year Guarantee on door seal
- Powerful heaters for shortened cycle times
- 21, 31.5 or 42kW (380/415V) electric or direct steam heating
- Steam Jacketed versions available (steam heated models only)
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Media Warming & Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
DOUBLE-DOOR, PASS-THROUGH LABORATORY AUTOCLAVES – RECTANGULAR SECTION (380/415V, 21, 31.5 or 42kW)
Where a clean room or containment suite is being installed it is often an advantage to install a through-wall autoclave to ensure containment. Priorclave manufacture Pass-through autoclaves with rectangular section chambers in 400 to 100 litre capacities. Double Door Priorclaves have interlocks to prevent both doors being open at the same time as this would breach the integrity of the site. They also have an interlock to prevent the door at the unloading end from being opened until the sterilisation cycle has been successfully completed and the load is safe to pass into the unloading end.
Pass-through Priorclaves include all the features of the Rectangular Section Range.
Priorclave are pleased to offer our uniquely comprehensive design and advisory service to help you to correctly specify and design and autoclave to suit your particular requirements.
Each site is different with the requirement for doors to be hinged to swing in different directions and with the location of the required services. Final manufacture therefore requires full details of the proposed location and operation routines. This can be achieved by a site survey by one of our representatives or by the supply of detailed drawings.
|
|
TOP LOADING PRIORCLAVE LABORATORY AUTOCLAVES
A firm favourite in laboratories throughout the food, drink, dairy, health and pharmaceutical industries, these autoclaves feature a 500mm vessel diameter enabling low loading heights for increased operator comfort. Models are available in 100 and 150 litre capacities and for electrical or direct steam heating.
- Compact for where space is at a premium
- 7 or 10.5kW or direct steam heating.
- Fully settable up to 138C–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5/10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming and Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Load support plate and 2/3 baskets
- Stainless steel waste container available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
COMPACT 60 PRIORCLAVE LABORATORY AUTOCLAVE
An ideal solution for the laboratory with occasional or low volume autoclaving requirements the Compact 60 allows flexible operation for the low volume user, usually only available in larger units.
- 60 litre capacity
- Floor standing with lockable castors
- More flexible than fixed cycle sterilisers for laboratory and mixed load use
- Fully settable up to 138°C – 2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory and optional Printer
- BioCote anti-microbial surface coating – unique to Priorclave
- 12 months parts and labour warranty (parts only outside the UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in sealed glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming facility
- Delayed Start facility
- Fan assisted cooling
- Timed Freesteaming
- Thermocouple port and separate test port
- Two stainless steel mesh baskets and a load support plate
- Stainless steel waste container available
- Operation from standard 13 Amp socket (UK)
- Full range of options and accessories
|
|
Piezo-resistive Pressure Sensor DS-1-A-400 fluid-Check®
for oil and water devices
Installation ONLY 3 Minutes, with the help of the measuring connection SERVCLIP (NO NEED TO CUT PIPES) www.servclip.com
DS-1-A-400-1/4" combinable with serv-Clip® Type 1
(for mounting on pressurized pipes)
DS-1-A-400-3/8" combinable with serv-Clip® Type 2
(for mounting on non-pressurized pipes)
Description
In addition to its robust and compact design, this sensor stands out by its high accuracy and its extensive measurement range. As a standard, the housing and all parts exposed to the liquid are made of stainless steel (Type 1.4571). The standard connection is G1/4“, with soft seals made of Viton (up to 200°C).
With the measuring connection serv Clip® type 1 or 2 (for mounting on pressurized pipes and on non-pressurized pipes) you can install other SENSORS like (Temperature, Flow rate, Leakage, Water), MANOMETERS, PARTICLE COUNTERS and more (DIN Norms). SERVCLIP can only used for HYDRAULIC OIL (no water).
Technical data
- Pressure range 0 ... 400 bar
- Output signal 4 ... 20 mA / 2 wires
- Operating temperature –20 ... 80°C
- Protection mode IP 65
- Right-angle plug connection DIN 43650 A
- Robust stainless steel housing
- Fully encased sensor element made of stainless steel |
|
901 Prescal® pressure switches with scaled adjustment knob
Adjustable pressure switch monitoring overpressure, vacuum or
differential pressure of liquid and gaseous – also aggressive –
media.
The pressure switch uses a scaled adjustment knob to enable
the adjustment of trip and reset pressure without the use of a
screwdriver.
Various versions with overlapping adjustment ranges are available. These cover the overpressure range of 5 mbar to 12 bar, as well as the vacuum range of -5 mbar to -700 mbar. |
|
The factory set pressure switches series 901
The switching pressure can be defined at a value of between 5 mbar and 12 bar in the overpressure range and between -5 mbar and -900 mbar in the vacuum range.
The main area of use for the compact pressure switches series 901 is in monitoring filling levels and filters, as well as in monitoring overpressure, vacuum or differential pressure in closed systems. These pressure switches are suitable for liquid and gaseous media including aggressive media.
|
|
| ... products without technical information |
| |
| The "ECH" Series has been studied for the cleaning high performances up to 500 Bar. This range is normally used for water jet blaster, for ship -monuments-building- cleaning and rot jet equipments. This model need 40 Hp power. |
|
| The "SLR" Series, with high performances requested 110 Hp, and 1.500/1.800 Rpm gearbox, is used for jetting drain and sewer cleaning equipment, for filter presser cleaning, for industrial washing plants. The good project, the optimal materials employed, have produced the SLR pump with high characteristics of performances and reliability. |
|
| The "EL" Series with its high performances 40/43 Hp power, is used for the drain and the sewer cleaning equipments, for washing of city solid waste container of medium sizes, car washing, for medium industrial filter presses cleaning, for sweeper and cleaner street. We have extended the range with version ELR with 1500 rpm. gearbox. |
|
| The "GLR" Series, with requested power of 73/75 Hp and at 1.500/1.800 rpm gearbox. We have constructed the GLR in orderr intemediary performances between the EL an to the SLR pumps. The GLR is destined to the sewer jetting cleaning application, and the heavy industrial cleaning, where great reliability is priority. |
|
| The "C" Series need 25 Hp power, is used for the washing of city solid small waste container, equipments for filter presses washing and tanks cleaning. |
|
| High volumetric efficiency. Self-priming and venting. Low pulsation. Low noise level. Long life. Specially suitable for demanding applications with continuous pressures up to 1000 bar. Combination with low pressure gear pumps possible. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
