|
|
PE 135
Salient Features & Benefits
- Highly sensitive & stable .
- Manual Temperature Compensation
|
|
|
|
|
|
Galvanic In-situ Oxygen Gas Detector Analyzer (Panel Mount) - G1010
- Exceptional high performance dynamic range for oxygen analysis
- Single point calibration
- Broad Range
- Microprocessor-controlled
- Programmable alarms and analogue output
- Hazardous-area models available
The G1010 in-situ oxygen gas detector and analyzer uses a galvanic oxygen cell to measure oxygen over an exceptional dynamic range of 100% to 0.1ppm (parts per million) in a variety of gases. The instruments are microprocessor- controlled and provide exceptional performance and versatility.
A large multi-digit, auto-ranging LCD shows the concentration and user-adjustable parameters.
Two alarm channels, user-programmable to be high, low or off, each provide one set of volt-free changeover contacts, and can be set to any concentration within the span of the instrument.
A user programmable analogue output of 0 to 5v or 4 to 20mA is available at the time of ordering.
Several versions of sensor are available, enabling the analyzer to operate at optimum performance in a diverse range of applications. These include a sensor suitable for operating in the presence of high concentrations of mildly acidic gases such as carbon dioxide and hydrogen sulphide.
|
|
The Series 3500 Trace Oxygen Transmitter is a true two-wire transmitter offering an economical way to make accurate and dependable measurements of trace oxygen in a variety of gases.
The Series 3510 Trace Oxygen Transmitter is the AC powered counterpart of the Series 3500
|
|
|
|
|
|
Zirconia Oxygen Analyzer (Transportable) - Z4010
- Measures from 100% to less than 1ppm
- Fast response time of less than 5s for 90% change
- Fully auto-ranging
- Fully programmable analogue output
- IP67 Rating
The Z4010 fully auto-ranging portable oxygen analyzer measures a wide range of oxygen concentrations from percentage levels to less than ppm in clean nonreactive gas mixtures. The zirconia oxygen sensor has a fast response time of less than 5s for a 90% change. Its robust carrying case, fast warm up time and switchable supply voltage provide an ideal solution for on-the-spot oxygen monitoring applications.
A large multi-digit, auto-ranging LCD is used to display measured concentrations and also user-adjustable parameters for alarm and analogue output configuration. A programmable analogue output provides an easy means to log results where necessary.
Two alarms channels, user-configurable for high, low or off states and hysteresis, each provide one set of volt free changeover contacts. They can be set to any concentration within the span of the instrument. A choice of two analogue outputs is available, 0 to 5V or 4 to 20mA, each with several pre-set ranges. Sample flow adjustment and monitoring are built-in, along with a sample pump for applications with a low sample pressure.
|
|
Teledyne Analytical Instruments offers a wide array of trace and percent portable oxygen analysis instrumentation built for both accuracy and endurance.
The Model 3110 portable trace oxygen analyzer combines a rugged design with the high reliability of Teledyne's trace level sensors. This ensures highly accurate ppm oxygen readings in a variety of background gases -- including hydrocarbons. The batteries supply at least 100 hours of continuous power to the analyzer, with a low-battery indicator LED.
The Model 311TC and 311XL portable trace oxygen analyzers provides complete oxygen analysis in a compact package. With high accuracy and fast response, this unit is FM approved intrinsically safe for use in Class I, Division 1, Groups B, C, and D. The 311PC offers the same features for percent analysis.
|
|
|
The Series 3520 Trace Oxygen Analyzer is a light-weight, compact portable oxygen analyzer designed for industrial and commercial applications where accurate, spot oxygen measurements need to be made.
|
|
The oxygen analyzer ARELCO A.R.C. Model POA MP - R integrates an electrochemical sensor sealed without mainntenance, and an electronics with microprocessor very successful.
The display with touch-sensitive screen allows to show in a look the totality of the essential parameters and to reach the various menus.
The device incorporates a function of internal memorization of data ( 350 values) stretchable by card SRAM which assures a total traceability on the analyzer (values of alarms, error message, calibration, modifications of configuration).
All these data is available on a parallel release (for connecting in a printer) and on a digital release RS232.
The function automatic calibration is easy to use and honorable elements as the choice of the values standards, the sequence of calibration thrown manually, at a set time or in interval of regular time, the choice of a calibration in one or two points, the safety in case of error on the gas used for the calibration.
|
|
The Oxatex oxygen analyser is designed for the continuous measuring of oxygen content in combustion flue gas for industrial installations, such as:
- Power plants
- Refineries
- Heating installations
- Industrial waste incinerators
- Process control applications, etc.
The flue gas to be measured is fed to a zirconium micro-gauge by natural
circulation.
The measured reading is directly processed by the unit’s integrated electronics.
Advantages:
• Robust Industrial construction for daily use in the most difficult of environments.
• Reliability of readings by automatic programmable calibration at regular intervals (optional).
• An «all in» one concept, with integrated electronics for reduced installation costs.
• Easy setting of parameters, carried out by remote control
|
|
|
|
|
|
SERVOTOUGH Oxy Analyser (1900 Digital)
Offering an exceptional range of industry-standard options and three unique, ground-breaking functions, the forthcoming Servomex SERVOTOUGH-Oxy oxygen gas analyser will set new standards of flexibility, stability and reliability from a single, cost-effective unit.
The new SERVOTOUGH Oxy is an intrinsically safe oxygen analyser for zone 1 areas with no purge required.
Technology Used
Oxygen – Servomex’s unique paramagnetic cell, which offers a fast, linear, accurate, highly stable and selective response in a non-depleting rugged package.
The sensors use non-depleting technologies, maximizing availability and reducing maintenance and operating costs.
Features
- Heated sample cell allowing significantly simplified sample system requirements
- Internal flow sensor for improved safety
- Internal pressure compensation for barometric and process fluctuations e.g Flare Stacks
- Autovalidation safely reducing the level of hands on maintenance with the highest confidence
- Low cost of ownership with no need for reference or purge gases.
- Long calibration intervals and indefinite cell life
- Configurable build giving specific solutions for a wide range of applications
- FEMA report available fully supporting SIL2 failure Mode & Effects analysis
|
|
SERVOTOUGH 1800 Oxygen Analyser
The 1800 is a stable, accurate and highly specific oxygen analyser for safe area use. It is designed to reliably measure percent oxygen in many safety critical industrial applications.
- Designed for safe area oxygen analysis
- Low maintenance and re-calibration requirements
- Special version for solvent bearing samples
- Range of alarm outputs to aid integration with other systems
- Easy to set up and operate
Technology Used
Oxygen – Servomex’s unique paramagnetic cell, which offers a fast, linear, accurate, highly stable and selective response in a non-depleting rugged package.
|
|
Besides the range of the portable ones from process, line FP is studied purposely according to problematic regarding the alimentary field. It concurs to obtain extremely precise analyzes sampling quantitative minimums (2 cc) extracts from confection beginning from containing modified atmospheres.
The analyzers in fact are equipped from a special syringe for the analysis spot that he captures alone quantitative of gas wished.
For he blots some to them confezionatrici are also available bread-boards that realize the analysis in continuous and to spot.
|
|
|
Available for zone 1, ATEX
|
|
|
Reliable measurement of ppm combustibles (CO + H2) or carbon monoxide (CO) together with oxygen, allows the user to determine and maintain the optimal O2 set point for the process. This results in improved product throughput, increased safety, longer equipment life, lower emissions and maximized fuel efficiency.
|
|
The analyser ARELCO ARC model 2008 IR MP-R is a compact and reliable instrument for specific measurement of CO2 or CO or CH4 in gas blending. The instrument is based on non dispersion infra red method (NDIR)
The touch sensitive display allow the user to see very quickly all parameters: gas contents, analogue output range, alarms status… and to get access to the menus.
The 2008 IR MP-R model is 19” rack type and integrates some data storing facilities, automatic calibration function. All data are available on digital interface RS232.
The IR technology requires a dry gas. The instrument could be couple to a gas dryer and speciel filter especially for measurement on flue gases.
|
|
Zirkonia Oxygen Analyser
BA 1000
Insitu ZrO2 oxygen analyser
Fast response time
Zero drift free
No cal- and reference gases necessary
Easy installation
Oxygen Flue Gas Analyzer
BA 2000
Oxygen Flue Gas Analyser with upstream filter
Durable ZrO2 – cell
Fast response
Quick probe and filter replacement
Easy calibration by instrument air
|
|
Analysers
A broad range of applications like boiler trim, emission monitoring, ammonia slip monitoring, combustion efficiency, LEL warning indication or inner atmosphere control require analysers with different measuring principles. Bühler offers optical, paramagnetic and zirconium technologies as well as tuned diode laser (TDL) gas analysers.
Portable trace O2-analyzer
BA 4510
Portable oxygen analyser
With ZrO2 measuring cell
O2 traces analysis
Internal pump
4-20 mA output signal, RS 232 serial interface, adjustable relay contacts
|
|
|
|
|
|
Many thousands of OXITEC® oxygen measuring systems are in operation throughout the world, providing customers with reliable, accurate measurements that guarantee easy and safe control of combustion processes. The OXITEC® analysing systems are the consistent advancement of the InSitu oxygen measuring technique on zircon oxide basis. Only the special gold brazing technique developed by ENOTEC guarantees a durably gas tight measuring cell and makes a regular calibration of the probe redundant.
Probe material and design make a problem-free use of the OXITEC® analysing systems for many years possible, also under harsh conditions, and apart from the explosion-proof execution (probe and electronics) also specially designed models for almost all conceivable applications are available. By the InSitu measurement (measurement directly in the flue gas, without extraction) the OXITEC® oxygen analysing system is maintenance-free, and also concerning the reaction rate OXITEC® is clearly superior to each extractive measurement.
The simple operation of the electronics and the interactive operator guidance make the handling of the SME5 evaluation electronics a child's play.
OXITEC® oxygen analysing systems are available in explosion proofed version (ATEX, CENELEC), too. As the only manufacturer in the world ENOTEC has an ATEX certificated dust explosion proofed probe available.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :