|
|
|
TOSH offers hundreds of standard shaped pads, available in a wide range of different qualities and hardness, realized with rubber which assure an excellent mechanical and chemical resistance. Special pads for special needs realized on demand.
|
|
|
We produce printing pads. They are constructed in silicone rubber, of different hardnesses, depending on the type of pad printing, customised, determined by the print size; the pads can be of different sizes and shapes according to the print specifications. Further information on the type or measurements of the pads to be used is released directly by our company.
|
|
More than 1000 standard tampons in 4 silicon materials.
5 standard models in shore A, delivery from stock made by TAMPOPRINT AG-
the original, world wide the highest tampon quality.
For “open”, “hermetic” and “rotary” tampon printing systems.
Further shore A and respectively shore 00 models as well as super dry silicon material and tampon forms available at any time as desired.
Tests and consulting will be made in our technology department.
Decades of experience will be at your disposal.
|
|
1.All pads are made of resin that import from Germany and France.
2 colors white and red, hundreds of shapes.
2.Our rubber pads has the good flexibility, the strong elasticity and the long service life which ensures high definition to flat, bend and irregular objects. Even if regarding the tiny design in the irregular superficial, it can guarantee the clear printing effect.
3. Mosstens the ink completely, it is easy to take off the ink and transfer printing, and the remaining printing ink is easy to elimiate.
4. Each kind of specification is complete, and may specially make according to the user specific requested.
5.We accept customized order with any shape.
Parameter:
Hardness from standard 15 to 40 degree. Usual pads including mid-, mid-soft, mid-hard, 20 and 25 degree
|
|
|
|
|
|
Printex offers a large selection of silicone printing pads. Using the highest quality silicone, our pads offer excellent ink transfer to a substrate; our printing pads also provide superior tear- strength and solvent resistance.
pads
Round
The first shape designed for pad printing and one of the most common pads used today.
These pads minimize distortion while placing an image on to a cylindrical surface.
Loaf
Derived from the round pad, size limitations required the round shape to be squared-up on 2 or more sides, developing the loaf pad.
This narrower profile, allows the loaf pad, to be positioned in restricted areas. The design of the loaf pad allows for 2 or more pads to be easily grouped together.
Bar
Shaped like the roof of a house, these pads were designed for long narrow applications. Long lines of text are difficult to print with round or loaf pads due to the over-compression it would take to pick up the lengthy image
The bar pad allows for items, such as long lines of text, to be printed with very minimal compression on the pad.
Recommended for printing on flat surfaces, due to the shapes inability to minimize distortion on rounded surfaces.
Durometer (Hardness)
We recommend selecting the maximum amount of hardness that the product can support for the best possible print.
Printex offers 3 Standard Durometers:
SOFT (yellow backing) 45 shore
MEDIUM (blue backing) 55 shore
HARD (red backing) 65 shore
|
|
|
|
|
|
|
Therefore, pads are made in many shapes, contours and densities to accommodate a multiplicity of product forms. A basic range of about eight pads offer excellent printing onto approximately 90% of the printed products shown here. Many articles can be printed relatively cheaply, and in many cases very profitably by comparison with traditional processes. With a manual machine, printing rates of up to 600 units or prints per hour are attainable. An automatic printer will offer in excess of 1200 prints per hour, manually fed. Printing rates, naturally are subject to many factors, such as, product texture, substrate, shape, ink type used, drying times, etc. Pad elasticity offers many possibilities - single and multi-color printing onto round, concave, convex, uneven, textured - almost any surface or substrate. Re-usable inks are available for fast drying applications - 10 to 20 sec. drying time. Also two-pot catalyst inks for more difficult substrates such as anodized or plated metals, polypropylene, polyethylene, polyamide, phenolics such as laminated plastics, Ceramics and Glass products.
|
|
|
|
|
|
The result of years of research and experience in the field of pad printing, this machine is able to print from 1 to 6 colours. Computerised electronic control with 4 axes, movements by means of motors and ball screws. Independent horizontal strokes of pads and sealed ink cups (or open plate-holding inktray) and vertical strokes of pads and piece-holder axes. The machine is designed for a wide variety of accessories giving very great control and for maximum printing precision, also over time. High productivity.
Features
- The machine structure is in electric-welded steel, enamelled and normalised to avoid deformation and vibration. Oven-enamelled with dual component paints.
- Machine movements and regulation are numerically controlled, using a touch keypad, easy to learn and simple to use. The operations are displayed on a backlighted LCD.
- The keypad in solvent-resistant material is mounted on a mobile arm for easy use.
- Capacity to store up to 30 work programs.
- Ability to program vertical axis height above the plate.
- Checks of machine controls via modem from our factory.
- Doctor blade support carriage and pad support carriage moved by linear guides.
- Vertical movement of pad by means of two ball screws to avoid bending.
- The machine complies with Machinery Directives EEC/89/392 & EEC/89/336.
|
|
|
|
|
|
The result of years of research and experience in the field of pad printing, this machine is able to print from 1 to 5 colours. Computerised electronic control with 4 axes, movements by means of motors and ball screws. Independent horizontal strokes of pads and sealed ink cups (or open plate-holding inktray) and vertical strokes of pads and piece-holder axes. The machine is designed for a wide variety of accessories giving very great control and for maximum printing precision, also over time. High productivity.
Features
- The machine structure is in electric-welded steel, enamelled and normalised to avoid deformation and vibration. Oven-enamelled with dual component paints.
- Machine movements and regulation are numerically controlled, using a touch keypad, easy to learn and simple to use. The operations are displayed on a backlighted LCD.
- The keypad in solvent-resistant material is mounted on a mobile arm for easy use.
- Capacity to store up to 30 work programs.
- Ability to program vertical axis height above the plate.
- Checks of machine controls via modem from our factory.
- The machine complies with Machinery Directives EEC/89/392 & EEC/89/336.
|
|
|
|
|
|
4-color pad printing machine with Conveyer
Specifications©U
SPM4-150/16G Four-colour open inkwell pad printer with conveyer:
1.Max. plate size: 100¡Á150mm£»
2.Max Printing area: 85¡Á130mm;
3.Max. worktable area: 90¡Á125mm£»
4.Max. printing speed: 1200pcs/h£»
5.Printable colours:4£»
6.Stroke of cylinder up-down: 80mm;
7. Stroke of table shuttle: 125mm;
8. Range of table height adjustment: 250m.
SPM4-200/16G Four-colour open inkwell pad printer with conveyer:
1.Max. plate size: 100¡Á200mm£»
2.Max Printing area: 85¡Á170mm;
3.Max. worktable area: 90¡Á125mm£»
4.Max. printing speed: 1200pcs/h£»
5.Printable colours:4£»
6.Stroke of cylinder up-down: 80mm;
7. Stroke of table shuttle: 125mm;
8. Range of table height adjustment: 250m.
SPM4-250/16G Four-colour open inkwell pad printer with conveyer:
1.Max. plate size: 100¡Á250mm£»
2.Max Printing area: 85¡Á220mm;
3.Max. worktable area: 90¡Á125mm£»
4.Max. printing speed: 1200pcs/h£»
5.Printable colours:4£»
6.Stroke of cylinder up-down: 80mm;
7. Stroke of table shuttle: 125mm;
8. Range of table height adjustment: 250m.
Advantages©U
1.Total microcomputer controlled operation;
2.Auto four digit counter built-in;
3.Ink covering by ink roller ;
4.Fully coin aluminum structure which is sturdy and long life
5.Independent pad stroke and speed control;
6.Printing speed adjustable to meet with different needs;
7."Inking twice, printing once" to get thicker ink covering;
Machine Fittings©U
1. Four Pad plates,
2. Four pads
3. Two blades
4. A tool box.
|
|
4-color pad printer with shuttle
Specifications©U
SPM4-150G
1.Max. plate size: 100¡Á150mm.
2.Max. worktable area: 150¡Á130mm.
3.Max. printing area: 85¡Á130mm.
4.Max. printing speed: 650pcs/h.
5.Printable color:4
6.Shuttle stoke: 125mm.
SPM4-200G
1.Max. plate size: 100¡Á200mm.
2.Max. worktable area: 160x130mm.
3.Max. printing diameter: 85¡Á170mm.
4.Max. printing speed: 650pcs/h.
5.Printable color:4
6.Shuttle stoke: 125mm.
Advantages©U
1.Microcomputer controlled operation;
2.Auto four digit counter built-in;
3.Ink covering by ink roller ;
4.Fully coin aluminium structure which is sturdy
5.Independent pad stroke and speed control;
6.Printing speed adjustable to meet with different needs;
7."Inking twice, printing once" to get better ink covering;
Machine Fittings©U
1. Four plates,
2. Four pads
3. Two blades
4. A tool box.
|
|
|
|
|
|
This high productivity machine is designed for a wide variety of printing uses. Rapid change: from open ink to sealed ink cups, printing from 1 to 4 colours. Axis movements controlled by microprocessor. Designed to allow for the addition of further accessories, even at a later date.
Features
- Machine structure in electric-welded steel, enamelled and normalised to avoid deformation and vibration. Oven-enamelled with dual component paints.
- Machine movements and regulation are numerically controlled, using a touch keypad, easy to learn and simple to use. The operations are displayed on a backlighted LCD.
- Keypad in solvent-resistant material.
- Ability to store up to 15 work programs.
- Axis registration by self-instruction and by co-ordinate dimensioning.
- High micrometric precision of plate-holder inktray.
- High micrometric precision of ink cups and doctor blades.
- Electro-pneumatic operation of horizontal and vertical axes.
- Machine in conformity with machinery directives EEC 89/392 and 89/336.
|
|
Sealed Cup Manual Pad Printer
Specifications:
Sealed cup manual pad printer
100MT
1.Plate area: 100×214mm
2.Dimension: 400 × 220 × 490 mm
3.Net weight: 30 Kg
4.Printing speed: 500pcs/H.
5.Max printing area:70×100mm.
6.Horizental Stroke:100mm
7.Vertical Stroke:60mm
Advantages: 1. Sealed Cup Manus operating .
2. Easy to change plate.
3. Lower price.
4. Coin aluminum structure.
5. Sealed cup is more environmental protection and ink saving.
Machine Fittings:
1.One pad
2.One steel plate
3.One operation manual.
|
|
|
|
|
|
This high productivity machine is designed for a wide variety of printing uses. Rapid change: from open ink to sealed ink cups, printing from 1 to 6 colours. Axis movements controlled by microprocessor. Designed to allow for the addition of further accessories, even at a later date.
Features
- Machine structure in electric-welded steel, enamelled and normalised to avoid deformation and vibration. Oven-enamelled with dual component paints.
- Machine movements and regulation are numerically controlled, using a touch keypad, easy to learn and simple to use. The operations are displayed on a backlighted LCD.
- Keypad in solvent-resistant material.
- Ability to store up to 15 work programs.
- Axis registration by self-instruction and by co-ordinate dimensioning.
- High micrometric precision of plate-holder inktray.
- High micrometric precision of ink cups and doctor blades.
- Electro-pneumatic operation of horizontal and vertical axes.
- Machine in conformity with machinery directives EEC 89/392 and 89/336.
- Indipendent doctor blade wagon
|
|
Serie LOGICA is a range of machinery studied and realized to simplify the pad printing process.
Their technological contents, as the CN electric operation, make these machines versatile and useful for any needs.
Serie LOGICA is splitted in 2 lines dedicated to different exigencies:
HIGHSPEED LINE main characteristics are high working cycles on small/medium size objects and an easy setting to be transformed in a real pad printing plant.
With HIGHSPEED LINE, TOSH improves the pad printing application opportunity even on applications where pad printing was excluded by machines technical limits.
FLEXIBLE LINE, developed for multicolour print on medium/big size objects (till 10 in a single cycle), distinguish itself with a great operative flexibility that mix very fast production changes with high production cadences.
|
|
|
|
|
|
Price Terms©U FOB GuangZhou
Payment Terms©U T/T.LC
Packing©U Wooden case
Lead Time©U Within 7 days
Standards Certificate©U ISO9001-2000
Power Supply©U 110/220v 60/50Hz 1£Phase
Colour Painted ©U Green
Specifications©U 1.Max. plate size: 200x450mm;
2.Max. worktable area: 520x220mm;
3.Max. Stroke of working table:200mm;
4.Max. printing speed: 800pcs/hr;
5.Air consumption: 225L/min(6bar);
6.Dimensions: 1231x850x1359mm;
7.Weight: 250Kg; .
Advantages©U 1. Microprocessor control for each function makes operation easy;
2.4-Digit auto counter built-in;
3. Coin aluminium structure ensures sturdiness;
4.Ink roller used for ink applying is easy to remove and clean;
5.Independent stroke and speed adjustment for pad up/down;
6.Auto balanced doctor blade ensures that ink can be scraped cleanly and completely;
7.Adjustable printing speed meets different printing requirements;
8.It is available that ink roller keeps working while pad doesn't lower down that so that ink will not easily become dry;
Machine Fittings©U 1. large steel plate one pcs;
2. Fxiture for computer keyboard;
3. Combination pad for computer keyboard.
This Model is designed especailly for printing keyboard of computer£» we will make expert computer keyboard fixture, combination pad, Pad plate according to different size of keyboard as per customers requirements.
|
|
Junior 90
This machine has been designed for print sizes from 80 mm, with 90 mm Øeter sealed ink cup, one colour, for bench use or with base. Up to 7 electronically controlled speeds; with microprocessor-controlled pneumatic movement, manually adjustable vertical stroke. High productivity.
|
|
Available in hundreds of standard dimension and in different materials.
Two diverse thick steel plates depending from number of impressions and precision needed or in 3 different quality of photopolymer, ideal for small and medium runs.
TOSH experts are available for a personal photoengraving service with a guarantee quality.
|
|
|
|
|
|
Sealed cup pad printer with shuttle
Specifications©U
PM2-100TG Pad printer
1.Max. plate size: 100¡Á200 mm;
2.Max. worktable area: 100x120mm;
3.Ink Cup diameter: ¦µ90mm;
4.Max. printing speed: 1000pcs/hr;
5.Printable colour :2;
6.Max printing area: 80¡Á80mm.
PM2-150TG Pad prionter
1.Max. plate size: 100¡Á250mm;
2.Max. worktable area: 130x140mm;
3.Cup diameter: ¦µ90mm;
4.Max. printing speed: 900pcs/hr;
5.Printable colors:2;
6.Max printing area: 85¡Á130mm.
PM2-200TG Pad printer
1.Max. plate size: 100¡Á300mm
2.Max. worktable area: 140¡Á180mm;
3.Cup diameter: 90mm;
4.Max. printing speed: 800pcs/hr;
5.Printable colors:2;
6.Max printing area: 85¡Á170mm.
PM2-250TG Pad printer
1.Max. plate size: 150¡Á350mm
2.Max. worktable area: 140¡Á180mm;
3.Cup diameter: 140mm;
4.Max. printing speed: 800pcs/hr;
5.Printable colors:2;
6.Max printing area: 130¡Á220mm.
Advantages©U
1. Double color printing, shuttle driven;
2. Microprocessor control;
3. Automatic 5-digit counter installed.
4. With coin aluminium structure frame, the machine is light and sturdy. .
5. The speed and the vertical stroke of the pad can be adjusted independently.
6. The extra function "twice inking, once printing" is designed for thicker ink film.
7. For different requirements, the working speed can be adjusted.
8. Sweeps forward and backward without pad falling down to prevent ink drying.
9. 2-color, 1-color printing available,
10.With air jet for fast drying.
11. Sealed cup to store and coating ink.
Machine Fittings©U
1. Two pcs plates,
2. Two pads
3. Two blades
4. One set tool box.
|
|
This machine has been designed for print sizes from 80 mm, with 90 mm Øeter sealed ink cup, two colours, for bench use or with base. Up to 7 electronically controlled speeds; with microprocessor-controlled pneumatic movement, manually adjustable vertical stroke. High productivity.
Features
- Solid structure in painted, electric-welded steel.
- Choice of seven speeds by means of selector switch.
- Manual adjustment of pad stroke.
- Keyboard with piece-counter, single or automatic cycle.
- Start-stop by pedal for each movement.
- Electro-pneumatic movements controlled by microprocessor.
- Object-holder table with cross movement.
- Pad-holder unit with cross movement.
- Machine conforms to Machinery directives EEC89/392 and 89/336.
|
|
The market demands more and more compact and flexible designs for automations and system solutions. For machines with high hourly outputs the camera inspection of good and bad parts has become a standard feature in the meantime; additional processes such as assembly or checking have to be integrated. It is, however, necessary that semi-automatic machines for smaller but often changing series can be retrofit within a very short period of time.
High-speed pad printing machine as a symbiosis of machine construction and application engineering by TAMPOPRINT® AG. As a leading turn-key supplier TAMPOPRINT is able to implement customer URS (User Requirement Specifications) into special machinery.
|
|
|
|
|
|
6-color pad printer with conveyer
Specifications©U
SPM6-150/18T
1.Max. plate size: 100¡Á300mm
2.Max. worktable area: 70x100mm
3.Sealed cup diameter: ¦µ90mm
4.Max. printing speed: 600pcs/h
5.Printable colours:6
6.Max print area: 80mm¡Á130mm;
7.Station number: 18pcs
8. Max Products Dimension: 120¡Á230mm.
9. Table stroke: 125mm
SPM6-150/22LT
1.Max. plate size: 150¡Á350mm
2.Max. worktable area: 70x100mm
3.Sealed cup diameter: ¦µ140mm
4.Max. printing speed: 600pcs/h
5.Printable colours:6
6.Max print area: 130mm¡Á130mm;
7.Station number: 22pcs;
8.Max Products Dimension: 190¡Á230mm;
9.Table Stroke: 200mm.
Advantages©U
1. Six color printing with conveyer;
2. Microprocessor control with numerical display leads to easy operation;
3. Automatic 5-digit counter installed;
4. With aluminum alloy frame, the machine is light and sturdy ;
5. The speed and the vertical stroke of the pad can be adjusted independently;
6. With sealed cup to protect operating environment;
7. The extra function "twice inking, once printing" is designed for thicker ink film;
8. For different requirements, the working speed can be adjusted;
9. Sweeps forward and backward without pad falling down, to prevent ink drying;
10.6-color, 3-color, 2-color, 1-color printing available,
11.The ink cup can be independently adjusted for overprint;
11.With air jet for fast drying;
Machine Fittings©U
1. Six plates,
2. Six pads
3. Six sealed cups
4. One tool box.
|
|
There is a clear trend towards automations, and additionally beside of the successful standards even to customized system solutions for the special demands of our customers from all over the world. The export share is over 60%. High-precision marking, often combined with the European hygiene standards as it is often the case in the pharmaceutical supply industry, are the key tasks for the tampon printing at TAMPOPRINT AG.
The ALFALAS laser systems are a complement to the tampon printing and one cannot imagine the modern marking processes without them. Whether day and night design in the automotive or telecommunication industries, wood grain design or marking of spare parts. There are often machine lines which represent a symbiosis of both marking technologies.
The perishability of the modern industrial design and individually adapted workpieces require a just-in-time production with a low number of pieces and this will well accommodate the laser marking.
|
|
|
|
|
|
Specifications©U
LC-PM1-100G Pad Printer
1.Plate area:100¡Á100mm/ 150¡Á100mm/200¡Á100mm;
2.Table area:200¡Á115mm
3.Max printing speed:1500pcs/h
4.Colour number:1
5.Max Printing area: 85¡Á90mm/ 130¡Á90mm/170*90mm.
LC-PM1-150G Pad printer
1.Max. plate size: 100¡Á150/150¡Á150/ 200¡Á150mm;
2.Max. worktable area: 200¡Á115mm;
3.Max. printing area:85¡Á130/130¡Á130/ 170¡Á130mm;
4.Max. printing speed: 1300pcs/hr;
5.Printable color quantity:1;
LC-PM1-200G Pad printer
1.Max. plate size: 100¡Á200/150¡Á200/ 200¡Á200mm;
2.Max. worktable area: 200¡Á115mm;
3.Max. printing area: 85¡Á170/130¡Á170/ 170¡Á170mm;
4.Max. printing speed: 1200pcs/hr;
5.Printable color quantity:1;
LC-PM1-250G Pad printer
1.Max. plate size: 100¡Á250/150¡Á250/200¡Á250/250¡Á 250mm;
2.Max. worktable area: 400¡Á150mm;
3.Max. printing area: 85¡Á220/130¡Á220/ 170¡Á220mm/220mm¡Á220mm;
4.Max. printing speed: 1400pcs/hr;
5.Printable color quantity:1.
Advantages©U 1. Microprocessor control for each function makes operation easy;
2.4-Digit auto counter built-in;
3.Coin aluminium structure ensures sturdiness operation;
4.Ink roller used for ink applying is easy to remove and clean;
5.Independent stroke and speed adjustment for pad up/down;
6.Auto balanced doctor blade ensures that ink can be scraped cleanly and completely;
7.Adjustable printing speed meets different printing requirements;
8.It is available that ink roller keeps working while pad doesn't lower down that so that ink will not easily become dry;
Machine Fittings©U 1. One steel plate;
2. One pad
3. Two blades
4. One set tool box
5. One english opearting instruction
|
|
Sealed Ink Cup 60
- High-quality tampon printing machine at a favourable price
- Suitable for automations thanks to PLC
- Different sequence cycles adjustable
- Ink residue pick up system available
With the new "Sealed Ink Cup 60 E" we have succeeded in creating a modern and a technically high-quality electropneumatic tampon printing machine. Based on the previous version "Sealed Ink Cup 60" an electrically driven tampon printing machine with many advantages such as double and triple print or piece counter was developed. Whether as a hand-work place or as a component of an automation, the "Sealed Ink Cup 60 E" can be used almost everywhere.
|
|
We are a medium-sized, globally renowned high-tech company from the Stuttgart area, and for almost fifty years have provided a range of decorative and marking technologies offering unparalleled opportunities.
Since the invention of the industrial tampon printing process by owner Wilfried Philipp in 1968, the opportunities in the field of ‘tampon printing’ have been subject to constant development. New materials and the ALFALAS laser system technology in particular have also contributed to this.
The extensive range of standard tampon printing machines includes a wide range of models and options that allow us to tailor the machines and automated systems precisely to the needs of the customer.
The best trained employees, state-of-the-art production facilities and effective organisational structures are just the start of what we have to offer.
The DIN ISO 9001 certification requirements are fulfilled.
|
|
|
|
|
|
It is updated on two colours pad printer with shuttle .overprint is more precision . Coin aluminum machine body ensure running stabilization.
Standards Certificate©U CE ISO9001-2000
Power Supply©U 110/220v 60/50Hz 1PHASE
Colour Painted ©U White colour
Specifications©U LC-PM2-100
1.Max. plate size: 100¡Á100 mm£»
2.Max. worktable area: 125¡Á200mm£»
3.Max. printing area: 85¡Á85mm£»
4.Max. printing speed: 1000pcs/hr£»
5.Printable colour :2;
6.Stroke of table shuttle: 125mm.
LC-PM2-150
1.Max. plate size: 100¡Á150mm£»
2.Max. worktable area: 125¡Á200mm£»
3.Max. printing area: 85¡Á130mm£»
4.Max. printing speed: 900pcs/hr£»
5.Printable colors:2;
7. Stroke of table shuttle: 125mm.
Advantages©U
1.Two-colour pad printer with shuttle ;
2.Each function controlled by microprocessor ;
3.Four-digit auto counter built-in;
4.Coin aluminium structure ensure solidity and durablity;
5.Ink roller flooding for easy install/uninstall ;
6.Independent pad up/down stroke and speed asjustment;
7.Auto balanced doctor blade available for efficient ink scraping;
8.Printing speed asjustable to fullfil various requirements;
9."Inking twice, printing once" for better ink covering;
10.Able to sweep forward/backward without lowering pad to avoid ink drying at intervals;
11.One or two colours printable;
12.Two-colour ink tray base adjustable separately for overprint adjustment;
13.Drying with auto air blowing for easy colour registration;
Machine Fittings©U 1. Two plates,
2. Two pads
3. Two blades
4. A tool box.
Package List©U LC-PM2-100
1. Package dimension:850¡Á580¡Á1460mm
2. Gross weight:140KG
|
|
|
|
|
|
Two colours pad printer with conveyer
Specifications©U
PM2-100TG Pad printer
1.Max. plate size: 100¡Á200 mm;
2.Max. worktable area: 100x120mm;
3.Ink Cup diameter: ¦µ90mm;
4.Max. printing speed: 1000pcs/hr;
5.Printable colour :2;
6.Max printing area: 80¡Á80mm.
PM2-150TG Pad prionter
1.Max. plate size: 100¡Á250mm;
2.Max. worktable area: 130x140mm;
3.Cup diameter: ¦µ90mm;
4.Max. printing speed: 900pcs/hr;
5.Printable colors:2;
6.Max printing area: 85¡Á130mm.
PM2-200TG Pad printer
1.Max. plate size: 100¡Á300mm
2.Max. worktable area: 140¡Á180mm;
3.Cup diameter: 90mm;
4.Max. printing speed: 800pcs/hr;
5.Printable colors:2;
6.Max printing area: 85¡Á170mm.
PM2-250TG Pad printer
1.Max. plate size: 150¡Á350mm
2.Max. worktable area: 140¡Á180mm;
3.Cup diameter: 140mm;
4.Max. printing speed: 800pcs/hr;
5.Printable colors:2;
6.Max printing area: 130¡Á220mm.
Advantages©U
1. Double color printing, shuttle driven;
2. Microprocessor control;
3. Automatic 5-digit counter installed.
4. With coin aluminium structure frame, the machine is light and sturdy. .
5. The speed and the vertical stroke of the pad can be adjusted independently.
6. The extra function "twice inking, once printing" is designed for thicker ink film.
7. For different requirements, the working speed can be adjusted.
8. Sweeps forward and backward without pad falling down to prevent ink drying.
9. 2-color, 1-color printing available,
10.With air jet for fast drying.
11. Sealed cup to store and coating ink.
Machine Fittings©U
1. Two pcs plates,
2. Two pads
3. Two blades
4. One set tool box.
|
|
|
|
|
|
"HSC" High Speed Circular - Your round parts deserve ... our all-AROUND-printing
* The fastest 1-colour printing machine in the world
* 1-colour printing with flawless finest texts and graphics on the circumference
* Extreme output of 20.- 40.000 parts / h, 1-colour
* Cylindrical parts with a diameter of 2 mm - 30 mm
nnovation & Know-how - resulting in an unbeatable combination from TAMPOPRINT® AG: A completely new rotary tampon printing process (patent pending /
DGM - German Utility Patent) with endless flow printing principle, with an exceeding output of 20.- 40.000 parts/h, printed in 1 colour with flawless finest texts and graphics on the circumference.
Basically: The smaller the diameter the higher the output / h. Cylindrical parts with a diameter of 2 mm -
30 mm. Thanks to the modular machine concept of the H·S·C"-High Speed Circular many different products can be decorated with the all-around-printing.
The "H·S·C"-High Speed Circular will be presented to the world public for the first time at the "Fakuma 2008" in Friedrichshafen (Lake Constance) / Germany,
Hall A1, Stand 1302 from October 14-18, 2008, where it can be seen in production.
Application examples:
Dialysis test tubes, syringes, refills for ballpoint pens
Ballpoint pen tubes, batteries, fiber pencil tubes
Tablet boxes, glass tubes, vials
Ink cartridges, tubes, safety fuses
Small aluminium boxes for tablets, tablet tubes
Cylinder made of plastics / metal
|
|
|
|
|
|
One Colour Sealed cup pad printer
Specifications©U
PM1-100T
1.Max. steel plate: 100 ¡Á200mm£»
2.Ink cup size: §¶90mm£»
3.Max. printing area :80¡Á85 mm £»
4.Printable color quantity:1£»
5.Max. printing speed: 1300 pcs/hr¡£
PM1-150T
1.Max. plate size: 100¡Á250mm;
2.Ink cup disameter: §¶90mm;
3.Max. printing area: 80¡Á130mm;
4.Max. printing speed: 1000pcs/hr;
5.Printable color quantity:1;
PM1-200T
1..Max. plate size: 100¡Á300mm;
2.Ink cup disameter: §¶90mm;
3.Max. printing area: 80¡Á170mm;
4.Max. printing speed: 1000pcs/hr;
5.Printable color quantity:1.
PM1-250T
1..Max. plate size: 150¡Á350mm;
2.Ink cup disameter: §¶140mm;
3.Max. printing area: 130¡Á220mm;
4.Max. printing speed: 700pcs/hr;
5.Printable color quantity:1.
Advantages©U
1.Each function controlled by microprocessor ;
2.Five-digit auto counter built-in;
3.Hight quality coin aluminium make structure solid and weight light;
4.Ink cup is used for ink covering,save ink and protect environment clean ;
5.The viscosity of ink is stable printing quality is easily guaranteed;
6.Independent pad up/down stroke and speed adjustment;
8.Printing speed adjustable to fulfil various requirements;
9."Inking twice,printing once"for thick ink film;
10.Able to sweep forward/backward without lowering pad to avoid ink drying at intervals.
Machine Fittings©U
1. Thick steel plate one pcs,
2. One pad
3. One sealed cup
4. One tool box.
|
|
Our range includes 8 types of cliché for all common commercial tampon printing systems, ready for print or unprecessed.
Fast service in the area of clichés and creating print templates is becoming more and more important. TAMPOPRINT is able to offer this fast service in spite of the large range of cliché materials offered, in particular by using our ALFALAS laser systems.
The extensive range of cliché materials and production types available today allow our customers to select the clichés designed to meet their requirements exactly.
The best trained employees, state-of-the-art production facilities, extensive hardware and software plus effective organisational structures are just the beginning of what we have to offer.
So it should come as no surprise that in many cases the certification guidelines required by DIN ISO 9001 are actually exceeded.
|
|
|
|
