|
|
Easy copying, quality results
Océ wide format copier, better by design
It’s a digital age. But you still need copies: from hard-copy originals, inkjet plots or corrected drawings. With the Océ TDS100 wide format copier, you can make all those copies easily and in high quality, whenever you need them. The Océ TDS100 not only reduces costly outsourcing it also puts you in control of your schedule. And its great design makes it a perfect fit for every working environment.
Highlights
- Easy for every user
- Easy for your workplace
- Easy high-quality results
- Easy on your budget |
|
| The result of years of research and experience in the field of pad printing, this machine is able to print from 1 to 6 colours. Computerised electronic control with 4 axes, movements by means of motors and ball screws. Independent horizontal strokes of pads and sealed ink cups (or open plate-holding inktray) and vertical strokes of pads and piece-holder axes. The machine is designed for a wide variety of accessories giving very great control and for maximum printing precision, also over time. High productivity. |
|
Our latest concept in pad printing machine design is where the
customer’s requirements are converted into a product that totally
meets their printing needs. During the design and development of
these machines, attention is given to the smallest of detail to
ultimately provide a machine with a very high operating flexibility,
and which is still operator and maintenance friendly.
At the heart of the entire new generation SL-pad printing machines
is the use of the latest technologies. The machine is fitted with a
free programmable PLC, which gives the control advantages
detailed below.
- Individual print job programs and parameters are stored in memory
and can be recalled at the press of a button. This gives ease of
machine set up and a reduction in both set up and down times giving
increases in both production and profit.
- The parameters once set, can be locked by an access code to
prevent alterations by unauthorized personnel.
- Operating control by visual touch screen panel.
- Machine self-diagnostic check
Machine can be used as a stand alone or integrated
into an automated system
- Machine movement is provided by two, frequency controlled electric motors. These drive the pad stroke and
printing plate movement, and by using the electric drive coupled to the controllability of the PLC, the following
printing advantages becomes available.
- Speed and movement can by finally adjusted to give a smooth printing action with guaranteed print quality.
- Having an electric drive the machines dies not suffer from air pressure fluctuations, the result being you get
better and more constant print quality.
- Low running costs, which increases your company’s competitiveness.
- Increased printing force allows you to optimize your printing operations by allowing you to use pads that are
larger, harder and with steeper sides. |
|
L36/150
The L36/150 is a flexograpich printing press able to print up to 3 colours with 2 special stations for applying a primer before printing and release coat after printing, this machine can also be equipped with a Corona treat. These allow to print on various types of PVC, paper OPP (acrylic and solvent), etc.
It is able to made from a long roll of 150mm wide to 3 printed rolls 50 mm wide with a maximum of 300 mm diameter
Specifications:
Electric meter counter
Roller to clean tape
Friction controlled drive rollers before primer/release coat station and slitting device
Safety cover prepared for solvent exhaust
Corona treatment |
|
| This high productivity machine is designed for a wide variety of printing uses. Rapid change: from open ink to sealed ink cups, printing from 1 to 4 colours. Axis movements controlled by microprocessor. Designed to allow for the addition of further accessories, even at a later date. |
|
Océ CS9060
Outstanding Value for Outdoors
The Océ CS9060 is a high-quality roll-2-roll printer that uses Eco-solvent inks to create indoor and outdoor-durable prints. It is ideal for customers that want to start offering high quality indoor and outdoor printing, or companies that are already active in this market and want to expand their production capacity.
The Océ CS9060 is also an excellent choice for corporate customers, for in-house production of exhibition graphics, posters, signage, billboards, etc.
Highlights
- Océ CS9000 VariaDot™ imaging technology for finer details, increased productivity, and better ink economy
- WAVE Stitching delivers higher print quality, improved productivity and increased media versatility
- Eco-solvent inks are ideal for print shop or office environments
- Up to 3 years outdoors |
|
| This high productivity machine is designed for a wide variety of printing uses. Rapid change: from open ink to sealed ink cups, printing from 1 to 6 colours. Axis movements controlled by microprocessor. Designed to allow for the addition of further accessories, even at a later date. |
|
| Structure entirely in aluminium fusion designed for 4 colour, high production printing. Equipped with caterpillar object transport system with 22 stations, adjustable on three axes with the option of single or double step moving. Wide space dedicated to loading and unloading of objects even automatically. Equipped with 4 hermetic ink cups complete with internal and external teflon treatment process which reduces cleaning times. Different strokes for inkpad and hermetic ink cup groups. Electronically controlled inkpad descent with different strokes. Hermetic ink cup group adjustable on three axes, insertable pauses in the printing cycle: cliche station, printing station. |
|
| EVO MAXI: entire structure in cast aluminium alloy, designed for pad-printing large sizes in 1 to 4 colours. The 2 to 4-colour version is provided with differentiated downward pad movement with electronic control of the strokes. 110, 140, 180 mm diameter hermetic cups, with internal and external Teflon coating to reduce cleaning times. The 4-colour version is provided with an adjustable electronic transfer unit on 3 axes, with the possibility to regulate the stroke on the 4 stations to the centimetre. Tilted piece-holder to facilitate printing on objects with slanted surfaces. |
|
Table pad printers without stand. This machine is to print small objects in 1 or 2 colors.
- Electro-pneumatic operation.
- A structure entirely in aluminum alloy.
- With # 2 closed hermetic ink-cups Ø 70 mm. with ceramic rings with separately regulation on the two diagonal axis with micrometric screws
- Clichè size 175x80 mm.
- Max printing area 65x60mm.
- Shuttle with speed control adjustable on three axis with differentiated runs of pad and ink cups
- Control panel with single and double color ink-loading program. The double ink loading program enable a greater cover on the printing area as needed.
- automatic cycle program with introducible pauses from the control panel
- Keyboard of commands with pieces-counter
- Automatic cycle program with introducible pauses.
- Commands by pedal of automatic and single printing cycle.
- Self-diagnosis electronic card.
- 3 Years guarantee. |
|
2 COLOR PAD PRINTING MACHINE GTO EVO 2C
Designed for two colour medium format printing.
- Stand in aluminium alloy with adjustable feet.
- A structure entirely in aluminum alloy.
- Electric-pneumatic operation.
- Self-diagnosis electronic card.
- Control panel with single and double color ink-loading program. The double ink loading program enable a greater cover on the printing area as needed.
- Speed control of each single movement through flow control.
- With 2 hermetic ink-cups Ø 110 mm. Inking system with an internal and external "teflon coated" process which reduce cleaning time.
- Max printing area 110x90mm.ù
- Cliché size 250x125mm.
- Cliché-holder with adjustable registration on 2 axis.
- Electronically controlled descent of the pads with different strokes displayed on the control panel.
- Piece-counter displaying the hour-average of printed cycles.
- Piece-holder adjustable on the three axis complete of platform balance regulation to facilitate printing on object with diagonal surface.
- Lateral sliding protection doors.
- Decibel reduction filters.
- Dimensions: 161x90x181 cm.
- Weight 210 Kg.
- 3 years guarantee. |
|
The new solvent flatbed printer ‘DMD EP 1600’ from TAMPOPRINT uses newest generation Epson piezo heads to print. With a true resolution of up to 1440 dpi, it is impressive on rigid materials.
The max. speed is up to 28 m²/hour. Media such as PP, PVC, forex, polystyrene, glass, ceramics, dibond panels, metal panels and trade fair wall elements can be printed on with ease.
The standard printing format is 1600 mm x 2500 mm (width x length). The max. material strength is an astonishing 500 mm.
A vacuum table is available as an option for flexible media.
Special designs and dimensions are also available.
The new ‘DMD EP 1600’ Made in Germany is now available and is supplied as a complete system incl. RIP software, installation and orientation, service and maintenance.
|
|
Designed for extended cutting and labeling application.
The industrial grade ink jet plotting and printing system is designed for long production runs with features such as no-clog extended run print heads, and remote high-capacity ink reservoirs.
The Mastercut and Genesis 2100 industrial flatbed cutting machine platforms are extremely adaptable and can be configured to carry a wide variety of cutting tools. The picture on the left shows an ink jet printing tool head that has been mounted on a Genesis platform. Please note that these images are taken from a production machine, not a test unit. The ink jet unit is enclosed in the long thin square shrouded aluminum housing that can be seen to the right of the orange cutting head. The large capacity ink reservoir is housed in the silver control console to the right of the cutting/printing head. The black hose line that runs from the ink jet print head towards the rear of the machine, supplies the print head with ink. This remote reservoir system means that the print unit can run for extended periods, and the ink reservoir can be replenished without any downtime. |
|
Orifice Configurations:
Printheads are available in a range of orifice configurations according to the desired print height and resolution. Multiple orifices per channel increase the print area without added cost and complexity.
High efficiency:
With printhead orifices smaller than a human hair, extremely low volume droplets are produced. As a result, the ink efficiency is superior to that of competitive printing technologies.
Repairability:
Being able to repair Trident printheads saves users money when compared to the high replacement costs for "disposable" or unrepairable printheads. The diagram below shows how the UltraJet II printhead is constructed for easy repairability.
In general, Trident printheads are built for industrial printing applications and designed to provide a lower overall total cost of ownership. |
|
OEM Printheads for Textile Printing:
If you are an Original Equipment Manufacturer (OEM) developing a textile printer, Trident's inert printhead construction and high jetting throughput make an excellent combination. Contact a Trident representative to discuss your OEM printer development needs.
Trident printheads for textile printing include:
PixelJet
768Jet
384Jet
Traditional vs. Digital Textile Printing:
Screen-printing, the traditional method, entails a long set up time and is not economical for short runs.
Digital imaging allows for less expensive short production runs, offers faster turnaround, and provides immediate results as well as pattern variability. |
|
Designed for the decoration in full colour of PVC toy-balls from 4” up to 10” over 360°
Installation with intelligent controls
Built in a modular way, expandable according to the required number of colours
Varnishing of the ball in line
Output: 500 cycles per hour
|
|
Automatic Cap Printing Machines with intelligent controls
Superb photo quality, full colour printing, resolution 200 Lpi with solvent or UV ink + UV varnish protection
Integrated pre-treatment and drying
Print parameters for different images are stored in memory
Very high scratch resistance
The output is 65.000 to 70.000 caps per hour (Ø 28 mm - full colour); with other machinetype capacities up to 200.000 caps per hour
|
|
Unique direct printing technology with specialised inks
Clean and accurately positioned print on each product
Up to 10 colours with integrated backstamp
Maximum image diameter of 320 mm
Capacity up to 500 prints/hour (in function of object, size, shape and number of colours)
Quick changeover, fast set-up, easy cleaning
Other configurations: MonoColor (up to Ø 350 mm inkcup) |
|
Multicolour decoration with wood or marble structure on 1, 2 or 3 sides simultaneously up to 400 mm width, with solvent ink, UV ink, water based ink. Finishing with UV varnish.
Printed decoration is as well as for inside as outside use (10 year guarantee).
|
|
Printing International offers you a wide range of standard pad printing machines for a lot of print applications: all sorts of plastic, wood, metal, leather, etc. Those systems are available with an open or closed inkcup (patented). It’s possible with the standard machines to print images to a maximum diameter of 145 mm.
All the consumables for pad printing are available by Printing International: pads, printing plates, printing inks,…
|
|
| We are pleased to inform you that TAMPOPRINT AG has extended its delivery programme by the successful further developments of the well proven 2-lane tampon printing machine types „Rotoprint“ and „Continua“. The extension of the „Rotoprint“ to 3 lanes allows an output of 150.-180.000 closures / h, printed with 1 to 3 colours and with a max. parts diameter of 26-32 mm. Closures with a diameter of 38-50 mm can be decorated with an output of up to 120.000 parts / h with 1 to 3 colours. The combination of the electro-mechanical drive by means of a toothed wheel and the use of only one printing cylinder (manufactured for a precise fitting on a rotary gravure laser) per ink unit lead to a perfect accuracy with an accordingly high machine efficiency. The advantage is first of all that only one cliché cylinder 100x150 mm per printing unit is needed and therefore the set-up costs remain low. Compared with the “Rotoprint”, on the 3-lane “Continua” it is possible to achieve a quality print with an output of more than 180.000 closures / h, using up to 5 colours. Both machine types have as a standard feature a new gas pretreatment which is automatically controlled depending on the printing speed and thereby achieve an optimum ink adhesion. After the cold air intermediate drying for both lines also the end drying can take place by means of gas. Optionally it is possible to integrate camera systems for the print image control. The components are fitted to our printing lines with a new sorting elevator that is gentle to the parts and colour-independent. The feeding of the closures takes place via gravitation, without mechanical damage and without air consumption. |
|
The market demands more and more compact and flexible designs for automations and system solutions. For machines with high hourly outputs the camera inspection of good and bad parts has become a standard feature in the meantime; additional processes such as assembly or checking have to be integrated. It is, however, necessary that semi-automatic machines for smaller but often changing series can be retrofit within a very short period of time.
High-speed pad printing machine as a symbiosis of machine construction and application engineering by TAMPOPRINT® AG. As a leading turn-key supplier TAMPOPRINT is able to implement customer URS (User Requirement Specifications) into special machinery. |
|
There is a clear trend towards automations, and additionally beside of the successful standards even to customized system solutions for the special demands of our customers from all over the world. The export share is over 60%. High-precision marking, often combined with the European hygiene standards as it is often the case in the pharmaceutical supply industry, are the key tasks for the tampon printing at TAMPOPRINT AG.
The ALFALAS laser systems are a complement to the tampon printing and one cannot imagine the modern marking processes without them. Whether day and night design in the automotive or telecommunication industries, wood grain design or marking of spare parts. There are often machine lines which represent a symbiosis of both marking technologies.
The perishability of the modern industrial design and individually adapted workpieces require a just-in-time production with a low number of pieces and this will well accommodate the laser marking. |
|
We are a medium-sized, globally renowned high-tech company from the Stuttgart area, and for almost fifty years have provided a range of decorative and marking technologies offering unparalleled opportunities.
Since the invention of the industrial tampon printing process by owner Wilfried Philipp in 1968, the opportunities in the field of ‘tampon printing’ have been subject to constant development. New materials and the ALFALAS laser system technology in particular have also contributed to this.
The extensive range of standard tampon printing machines includes a wide range of models and options that allow us to tailor the machines and automated systems precisely to the needs of the customer.
The best trained employees, state-of-the-art production facilities and effective organisational structures are just the start of what we have to offer.
The DIN ISO 9001 certification requirements are fulfilled. |
|
Serie LOGICA is a range of machinery studied and realized to simplify the pad printing process.
Their technological contents, as the CN electric operation, make these machines versatile and useful for any needs.
Serie LOGICA is splitted in 2 lines dedicated to different exigencies:
HIGHSPEED LINE main characteristics are high working cycles on small/medium size objects and an easy setting to be transformed in a real pad printing plant.
With HIGHSPEED LINE, TOSH improves the pad printing application opportunity even on applications where pad printing was excluded by machines technical limits.
FLEXIBLE LINE, developed for multicolour print on medium/big size objects (till 10 in a single cycle), distinguish itself with a great operative flexibility that mix very fast production changes with high production cadences. |
|
Our latest concept in pad printing machine design is where the
customer’s requirements are converted into a product that totally
meets their printing needs. During the design and development of
these machines, attention is given to the smallest of detail to
ultimately provide a machine with a very high operating flexibility,
and which is still operator and maintenance friendly. At the heart of
the entire new generation SL-pad printing machines is the use of the
latest technologies.
The machine is fitted with a free programmable PLC, which gives
the control advantages detailed below.
- Individual print job programs and parameters are stored in
memory and can be recalled at the press of a button. This
gives ease of machine set up and a reduction in both set up
and down times giving increases in both production and profit.
- The parameters once set, can be locked by an access code
to prevent alterations by unauthorized personnel.
- Operating control by visual touch screen panel.
- Machine self-diagnostic check
- Machine can be used as a stand alone or integrated into an automated system.
Machine movement is provided by two, frequency controlled electric motors. These drive the pad stroke and
printing plate movement, and by using the electric drive coupled to the controllability of the PLC, the following
printing advantages becomes available.
- Speed and movement can by finally adjusted to give a smooth printing action with guaranteed print quality.
- Having an electric drive the machines dies not suffer from air pressure fluctuations, the result being you
get better and more constant print quality.
- Low running costs, which increases your company’s competitiveness.
- Increased printing force allows you to optimize your printing operations by allowing you to use pads that
are larger, harder and with steeper sides. |
|
|
|
