|
|
|
Pressure tanks made of galvanised steel or stainless steel are available in many sizes (1 litre - 250 litres). Due to uniform, pulsation-free material transfer from tank to gun, a first class spray pattern and a high working speed is achieved. If necessary, pressure tanks can be fitted with air-powered or electric agitators in order to achieve high hue accuracy and a homogeneous surface finish. WALTHER PILOT offers complete systems for all requirements. WALTHER PILOT manufactures pressure tanks in accordance with strict requirements of pressure equipment Directive 97/23/EC. In accordance with Directive 94/9/EC (ATEX), WALTHER PILOT has the approval for manufacturing equipment for appropriate application in areas exposed to explosion threats. Furthermore, we are certified to manufacture and approve tanks in accordance with the US-American ASME-code as well as the Chinese Safety Quality License. 10 years of delivery guarantee for spare parts.
|
|
|
For simple, cost effective cold glue supply of low viscosity materials at pressures up to 6 bars (84psi), pressure tanks with 0,75 liters (0.2 gallons) to 12 liters (3.2 gallons) capacities are a reliable solution.
|
|
Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure. The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure) safety pressure relief valves and Manual, Rotary or Oscillating agitation types are available to provide the best quality agitation.
Binks Pressure Feed Containers are constructed from the highest grade materials and fully comply with European and Global pressure regulations including PED, ATEX and ASME.
|
|
For all tasks requiring continuous application of substantial material / paint quantities at a steady pressure, SATA paint pressure tanks are the ideal solution. Different tank sizes, ranging from 2 to 100 iters, and variable pressure adjustment allow almost unlimited possibilities. Accessories dedicated to special tasks, such as manual, pneumatic or electric agitators are available.
Both low viscosity paints and high viscosity or abrasive materials can be applied swiftly and without problems with SATA paint pressure tanks. There are no moving parts and, therefore no wear and tear. All material-conveying parts can be supplied in stainless steel to special order. Work becomes especially profitable if the pressure tank size can be adapted to the original material container; reducing cleaning to a minimum as the original material container is simply inserted into the paint pressure tank.
|
|
Process Solutions manufactures a wide range of tanks:
Capacities: .5 gallon to 5,000 gallons
Materials of construction: Stainless Steel (T-304/T-316L), Steel, Polyethylene, Polypropylene, C-276
(Hastelloy ©)
Configurations:
a. Cylindrical
flat bottom, cone bottom, dish bottom, sloped bottom
horizontal or vertical
closed or open top
ASME or process vessels
b. Square/Rectangular
Finishes:
Stainless Steel: 2b-mill finish, 2b-mill finish with welds ground and polished, #4 mechanical polish, #7 mirror
C-276: 2b-mill finish, 2b-mill finish with welds ground and polished, #4 mechanical polish, #7 mirror
Aluminum: 2b-mill finish, 2b-mill finish with welds ground and polished, #4 mechanical polish, #7 mirror
Steel: painted per specifications.
Plastic: FDA approved material available in various FDA approved colors - standard is natural (white).
|
|
Differents types:
Direct Drive Agitator - Air Powered direct drive agitator assembly with 1/2 hp air motor and a three bade propeller to keep materials in suspension even with high solids.
Indirect Air Motor Drive - Standard duty, smooth running with gear reducer, 1/2hp, 15:1 ratio, 20 to 120 RPM. Inc throttling valve, fittings and hoses for connection to air supply on tank lid. Air consumption is approx 6CFM @ 50RPM.
Reciprocating Air Motor Drive - 180° reciprocating action provides excellent agitation of all types of materials. Particularly important for waterborne shear sensitive materials. Very low air consumption
|
|
| ... products without technical information |
| |
BOTTOM DISCHARGE SKIP WITH SIDE CHUTE
Lever operated with side chute
The most versatile skip with both centre and side discharge, to be used for a variety of site concrete pouring requirements. The side chute allows concrete to be poured into structures where access is a problem
With a fixed bale arm, the 116 GL skip makes the concrete pouring effortless and precised.
|
|
1011 Concrete bucket
Conical shape with straight outlet. Rugged, heavy-duty design with handlever operation of patented discharge gate. Optional approved welded-on chain or lift beam.
Options:
with bar or
hook or
approved, welded-on chain
forklift brackets
hydraulic lever operation
|
|
1092 Concrete bucket
Rectangular form with straight, inclined outlet for casting formwork.
Rugged, heavy-duty model.
Outlet within frame.
Options:
with hooks
with bar
with welded-on chain
with handwheel
|
|
GEARED ROLLOVER SKIP
Laydown version
The SBC VOL skip is the right skip when flowing a concrete with a low SLUMP (up to 5 cms)
The SBC VOL Geared Rollover Skip is designed for pouring mass concrete onto shutters and also large slab areas.
The patented innovative design offers excellent accessibility where handrails and scaffolding may present a problem. Gate operation is by means of a geared hand wheel which enables precise and accurate placing.
Capacities of 1200 litres and above are fitted with heavy duty reinforced bale arms.
The SBC VOL skip sits in the horizontal position on the ground for ease the filling and reverts to the vertical when in use.
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Laydown centre dischage version & lateral lifting eyes
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Upright centre dicharge version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TI system are the following:
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTREGRAL SYSTEM
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Laydown centre dischage version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM
|
|
1033 Concrete bucket
with release cord
Square shape with rounded corners; lateral chute or hose connector. Extra-rugged heavy-duty design with pull wire for releasing patented discharge gate. Gate closes automatically after discharge.
Especially suitable for casting formwork.
Built in accordance with international safety regulations, such as CE.
Standard version with 1.5m rubber hose.
Options:
with bar or traverse
hook or lug
approved, welded-on chain
outlet hose Ø 150mm or Ø 200mm or Ø 300mm
forklift brackets
up to 1000 litres
horizontal version
|
|
3030 Anti-pollution storage depot
Robust steel sheet construction for statutory storage of water-polluting materials; safe and simple transport with crane or forklift. With overflow basin and binding-agent starter set.
Options:
any special colour
your logo on the doors
|
|
2019 Washing platform for concrete buckets
Robst steel construction for cleaning diverse concrete buckets. The raised floor guarantees the ideal working height for washing. With access ladder, safety rail and non-slip grid.
Options:
any colour
with your logo
galvanised
|
|
washing platform for concrete skips
The BETONET Compact is a skip washing station with a water recycling system. The new equipment meets the jobsites requirement in general environmental aspects and more especifically on the High Environmental Quality jobsites. The station enables to put safely the SECATOL concrete skip on a unique place (whatever model is being used), and to retreive and treat the sludge from the washing process. The PH treated and recycled water can be used for further cleaning whilst the sludge can be disposed of without pollution risks. Whether a site or a pre cast plant, washing skips are essential to ensure efficient use and durability, therefore the more use, the more they will require cleaning, thereby increasing consumption of water. The recycling system if the BETONET offers a distinct advantage whilst caring for the environment.
this skip washing station is patented and complies will the european acutal legislation.
|
|
|
|
see the results for the following category : 
