|
|
SPRAYMIUM the new electrostatic paint gun from SAMES and KREMLIN
SPRAYMIUM is a paint gun combining ergonomics, reliability and performance of application. It is dedicated to companies wishing to improve their application process by facilitating the work of the operator.
SPRAYMIUM combines Innovation and Experience in providing access to low pressure and high pressure spraying technologies, the qualities of AIRMIX and VORTEX ® which are guarantees of high quality for industrial finishing.
All components offer a technological breakthrough leading to an optimization process of formal painting.
SPRAYMIUM offers controls on the rear of the gun from where the operator can, with a single hand, choose from 3 pre-set electric settings and from there the flow management painting is done instantly. These electric settings are modifiable by the operator in order to better adapt to the types of items to be painted.
A pressure sensor integrated into the gun is used to know in real time pressure for a very precise adjustment of the spraying and perfect repeatability on a daily basis.
This is a patented novelty, exclusive to SPRAYMIUM.
SPRAYMIUM means also the dedicated control module SPRAYBOX, extremely friendly, easy to use, based on simple icons and easily understandable. The module can work immediately with the application programs preset. Of course, the operator can adjust these programs to their needs easily thereafter. |
|
COBRA 1 & 2 spray guns - are available with Trans-Tech® (Compliant & HVLP) Atomisation for optimum output and Paint Savings... Fitted with the very latest advances in EPA compliant Transfer-Technology - COBRA provides considerable paint savings whilst producing the highest levels of atomisation, high speed application with flow rates of up to 600cc/min or more. Such exceptionally efficient atomisation and material transfer ensures optimum coverage and paint usage while complying with the toughest EPA legislation.
COBRA "Advanced Conventional" - air caps outperform the rest with uniquely designed high capacity airflow and outstanding atomisation characteristics coupled with excellent product features. COBRA's Advanced Conventional Air Caps makes them the ideal guns for small operations or high volume industrial spraying. Advanced Conventional Atomisation will operate and atomise the most difficult spray materials, but will not produce the paint savings as seen with Trans-Tech Atomisation Technology.
|
|
TRP 500/700 - Automatic spraying - air/electrostatic
The TRP range of spray guns is internationally recognised for its high spraying quality.
Based on the air + electrostatic technique, these guns allow high flow painting.
The fan spray version is suitable for working on large flat surfaces, metal sections and parts with deep cavities. The round spray is adaptable to a wide variety of parts: tubular and wire objects, parts with complex shapes.
TRP 700 ESLP (Fan spray version only) uses low air pressure and the electrostatic process to paint with minimum paint mist and overspray. It combines top spraying quality with environmental compliancy.
|
|
| The unique Binks air assisted airless tip and air cap design is now available in a manifold automatic gun platform. Ideally suited for multi-gun finishing equipment such as rotary machines, reciprocators or fixed chain-on-edge systems located in high production environments. |
|
The Estaquick is a quick disconnect electrostatic air atomizing spray gun. The spray head is lathered directly in Peek material to make it robust and compatible with all paint materials available in the industry. The gun disconnects for service in less than 5 seconds thanks to an easy 90° turn mounting bracket.
|
|
ITW Ransburg expands the Vector line of manual electrostatic spray guns with the introduction of the Vector AA90
The Gun combines superior airassisted airless atomisation technology with powerful electrostatic features, all in one gun. This integration results in a comfortable, lightweight gun with superior spray pattern characteristics, unmatched 'on gun' fan pattern adjustability with extraordinary high transfer efficiencies.
|
|
Weighing only 415 grams, this high performance spray gun will cover as fast as a conventional spray gun but with very high material savings. Fully compliant with all existing and anticipated environmental legislation, the Compact Gravity Feed spray gun is the profitable way to achieve superb standards of finish quality.
|
|
| Blue Compact spray gun utilises the very latest advances in EPA compliant Transfer-Technology. This provides considerable paint savings whilst producing the highest levels of atomisation, high speed application with flow rates of up to 600cc/min or more. Such exceptionally efficient material transfer ensures optimum coverage and paint usage while complying with the toughest EPA legislation. |
|
The unique tip and air cap design of the new Binks AA4000 Air Assisted Airless HVLP Spray Gun allows operators to use lower fluid and air pressure than the competition to achieve an exceptionally fine finish with better paint savings.
|
|
Type HR-J same as BI-J or BR-J spray guns but without cup and with an air transformer 1/4 " Gas complete added to the handle. The product supply is made by remote pressure pot or transfer pump. The air supply for the spray gun and the remote pressure or transfer pump is assured by a compressor with a minimum air output of 12 m3/h.
For each sprayguns, 3 types of fluid adjustment assembly (tubes, switches and head of air) are available:
- St : standard FAA for basic work,
- FAA C for precision work
- FAA multitrous M for body work (meticulous) |
|
Type BI-J with product supply by cup underneath and air supply by turbine. Suitable for small or medium surfaces and for products with a low or normal degree of viscosity up to 30 seconds, Ford Cup n° 4
For each sprayguns, 3 types of fluid adjustment assembly (tubes, switches and head of air) are available:
- St : standard FAA for basic work,
- FAA C for precision work
- FAA multitrous M for body work (meticulous) |
|
FLG-5 is a full size manual spray gun range to provide user's with the competitive advantage needed in today's finishing facilities.
FLG-5 is suitable for most routine spray jobs in the workshop and can also be used by DIY enthusiasts. This budget range of spray guns are available as spray gun kits in Suction and Gravity versions and there is a Pressure spray gun option for the larger areas requiring fast coverage without the added down time of re-filling small cups.
|
|
Compact "Trans-Tech" pressure spray gun, for optimum paint savings and ultimate spray performance.
A spray gun specially designed to satisfy the highest quality volume finishing demand in many industrial applications, spraying all types of surfaces including metal, wood, plastics, ceramics and composites.
|
|
| Graco offers a variety of manual and automatic air spray, HVLP, airless conventional, compliant and electrostatic spray guns and systems. |
|
Low pressure srpaygun
Type BS with product supply by cup above and air supply by turbine. Suitable for small or medium surface and products with a viscosity from 15 to 60 seconds,
Ford Cup n° 4
For each sprayguns, 3 types of fluid adjustment assembly (tubes, switches and head of air) are available:
- St : standard FAA for basic work,
- FAA C for precision work
- FAA multitrous M for body work (meticulous) |
|
| The Binks AA4000 Air Assisted Airless HVLP Spray Gun allows operators to use lower fluid and air pressure than the competition to achieve an exceptionally fine finish with better paint savings. |
|
Spraying Systems Co. has been the leading designer and manufacturer of spray equipment for over 60 years. GunJet spray guns were developed to serve all your cleaning and rinsing needs. Whether your application requires a gentle spray or a strong solid stream, GunJet spray guns are dependable and efficient, making them the best solution for all types of cleaning and rinsing applications. Experience the comfort and control GunJet spray guns can provide for your cleaning and rinsing applications. Contact your local Spraying Systems Co. representative or visit our Web site @ www.spray.com and try a GunJet spray gun today.
|
|
VECTOR AA90 manual airmixte electrostatic spray gun new generation
4 fair arguments to use a Vector AA90:
- An extraordinary high transfer efficiency, the best of the market to save
liquid materials
- Easy and fast voltage selection on the spray gun
- Adjustment of fan pattern size on the spray gun
- Lightweight and ergonomic
|
|
AGMD Automatic Spray Gun
(Robot mount, quick disconnect)
AGX Automatic Spray Gun
(Standard production)
AGX Automatic Spray Gun
(For abrasive materials)
AGX Automatic Spray Gun
(For corrosive or mildly abrasive coatings |
|
DELTA SPRAY® XT, Air spray (atomizing with air pressure up to 7 bar).
DELTA SPRAY® AUTO HVLP (atomizing air at high volume, low pressure).
Compliant (atomizing with reduced air pressure up to 2,5 bar).
Excellent durability and high end finishing quality are the key features, whether choosing the gravity-cup, suction feed or pressured gun version. |
|
| These automatic guns are used e.g. for quality control to mark deficiencies. Dots with diameters of 3 to 30 mm or lines are possible. Extremely short switching time (open, spraying, close) in the range of 25 to 30 milliseconds is optimal for productions with high cycle times. Guns with flushing devices can also be ordered. A large selection of nozzle sizes: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm Ø is available. WALTHER PILOT offers complete paint marking systems with pressure tanks, compressed air fittings, solenoid valves and hoses. 10 years of delivery guarantee for spare parts. |
|
| AIRMIX spraying guarantees: excellent quality of finish, significant product savings, a precise fan width according to the angle of the nozzle chosen, the application of medium paint thicknesses and a medium speed of gun travel . |
|
A perfect finish is obtained using PILOT WA 800 series automatic spray systems. All materials – also water paint – can be processed, since the front part is completely made of stainless steel. The automatic paint spray guns are fitted with adapter plate. This enables quick exchange of the gun for cleaning and maintenance work. The gun is available in high pressure, medium pressure and HVLP variants. Particularly high application efficiency can be attained for medium pressure and HVLP.
A large selection of nozzle sizes: 0.5 / 0.8 / 1.0 / 1.2 / 1.4 / 1.5 / 1.8 / 2.0 / 2.2 / 2.5 mm Ø. Besides the standard spray gun with internal control, models for external activation are also available. WALTHER PILOT offers complete spray systems incl. pressure tank for conveying paint, compressed air fittings, solenoid valve, and hoses. 10 years of delivery guarantee for spare parts. |
|
It is possible to mark dots and lines using the PILOT Signier series automatic spray systems. The guns are suitable particularly for sharp-edge painting as well as for painting small parts. They are used also for the dot-marking and for the application of adhesives.
Available nozzle sizes: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm Ø.
As standard, the spray guns are equipped with internal control. Models for external activation are also available. WALTHER PILOT offers complete spray systems with pressure tanks, compressed air fittings, solenoid valves, hoses. 10 years of delivery guarantee for spare parts |
|
The finest of results are obtained using the PILOT Mini decoration spray gun. The handy spray gun is ultra-light weight (only 290 g net weight). The gun body is made of high tenacity plastic and parts in contact with material are made of stainless steel; water-based paints can be processed without problems. With gravity-feed cup 125 ccm and sieve.
A large selection of nozzle sizes: 0.3 / 0.5 / 0.8 / 1.0/1.2/1.5 / 1.8 / 2.0 / 2.2 / mm Ø. For high application efficiency and for saving material, the guns can also be supplied as medium-pressure model. In addition, a version for connection to pressure tanks is available. 10 years of delivery guarantee for spare parts. |
|
FLG 3 Finishline Gravity Feed Spray Gun
Durable, high quality construction and precision engineered to produce well-atomized uniform spray patterns. Stainless steel fluid tip and needle. Disposable cup liners included.
Technical Specifications:
Body: Aluminum
Weight: 27 oz. w/cup
Air Inlet: 1/4" NPS (M)
Fluid Inlet: 3/8" BSP(F)
Fluid Passages: Aluminum
Feed Type: Gravity Feed
Service Bulletin: SB-2-614
Gun Repair Kit: FLG-488 |
|
| The Binks Mavrick is a high volume airless spray gun designed for FRP plural component spray applications. It features an external mix converging spray fan pattern of resin and hardner. An optional chopper attachement is available. |
|
AGXV-540 Automatic HVLP Spray Gun (Standard production)
AGXV-541 Automatic HVLP Spray Gun (For higher flow rates, viscosities)
AGXV-543 Automatic HVLP Spray Gun (For corrosive or mildly abrasive coatings)
COMPACT 507, HVLP (Blue), SIPHON (Maintains regulatory compliance for HVLP)
COMPACT 506, HVLP (Blue), GRAVITY, 1 LITER (Maintains regulatory compliance for HVLP)
COMPACT 507, HVLP (Blue), PRESSURE (Maintains regulatory compliance for HVLP)
COMPACT 506, HVLP (Blue), PRESSURE (Maintains regulatory compliance for HVLP) |
|
| This new generation Airmix gun eliminates more than 80% of overspray, reduces air consumption by up to 50% and offers superioir finish quality. |
|
| M22 P HTV: The HTV gun - flat fan - (Vortex technology) is recommended for applying low viscosity materials to difficult to reach areas |
|
|
|
