|
|
|
|
|
|
PAINTING ROBOTS:
Six-axis EPX-series and PX-series “Expert Paint” robots are designed to optimize performance in industrial, automotive and aerospace coating and dispensing applications. They can be used for primer, base coat, finish coat, clear coat and spray dispensing, using water-based, solvent, powder, glaze, and glue/adhesive materials. Motoman paint robots feature a wide range of reaches (800 mm – 2900 mm) and payloads (3 kg – 20 kg). A variety of wrist types (standard, Lemma, 3-roll and hollow) are available, depending on the robot model and application.
Motoman EPX- and PX-series robots can efficiently coat intricate parts with recesses, curved surfaces, and picture frame-like shapes. Using a complex spray path, the robot can spray different areas of the part to various film thicknesses – without runs or sags.
Motoman offers a variety of fully integrated spray gun options for these different wrist types, including air spray, electrostatic and bell applications. As an option, Motoman offers a built-in (external axis) servo motor that can be used to drive gear pumps which are used for closed-loop fluid control).
All of the Motoman EPX-series and PX-series robots feature a Factory Mutual (FM) Class 1 Division 1 explosion-proof rating.
|
|
GR-530G
Ther robot is complete of carousel with two or three arms, ideal for the painting of chairs, with a middle production of 150 pieces/hour.
The carousel provides their positioning in the frontal part for the workmanship.
The programming is effected by direct self-learning.
The simple and economic solution of the carousel avoids to the customer the construction of expensive plants of transport and besides only one operator is enough for loading and unloading of the pieces.
Also when the production doesn't foresee great series of pieces, the robot with the carousel becomes an optimal solution.
|
|
GR 630ST
Anthropomorphous Robot standard version with six degrees of liberty, suitable for painting in line, where exist air or floor conveyor systems, or in absence of handling and limited space, with the aid of an external small carousel it is possible to paint small pieces.
|
|
GR 6100
The robot GR 6100 is suitable for the painting of great pieces, of plans, of windows and doors in line.
It is a new conception model of robot, it uses all the best available technologies.
Thanks to component lubricated to life the maintenance it is really limited.
It uses motor with digital control, this allows him to get speed and precision notable.
The software is provided of a complete self-diagnostic, besides the statistic of production and, at request, a program of tele-assistance from remote.
The programming can be made with point to point or off line systems.
|
|
GR 6100SC
Version of the robot GR 6100 with the application of the Belt conveyor, ideal for the painting of kitchen doors.
|
|
The FANUC paint robot series is suitable for a wie range of painting and coating applications. They offer highest flexibility and precision to paint all sorts of materials such as plastics, metal, wood...
FANUC painting robots are ideal for many types of materials and applications:
• Automotive body (interior and exterior)
• Automotive parts
• Plastics (e.g. mobile phone)
• Wood
• Steel
• Anti-corrosion
• ... and many other
The Paint robot series is available in following models:
• PaintMate 200iA and PaintMate 200iA/5L with 5kg payload and 704mm and 892mm reach.
• P-50iA with 7.5kg payload and 1360 mm reach
• P-250iA/10S with 10kg payload and 2000 mm reach
• P-250iA/15 with 15kg payload and 2800 mm reach
|
|
CMA was born in the 1994 and since that time it has followed an uniform growing which led it to be one of the most important Italian company for the production of anthropomorphic robots for painting.
This success is testified by the over 700 robots set up among Italy, Europe, South America, Central America, North Africa and Australia.
Thanks to a long experience in this field, CMA is able to offer suitable solutions for painting with individual automatic Robots or integrated systems and we guarantee very high quality and reliable plants and services.
The Robots are studied for each sector of application: simple but very fast models, five-axes Robots with direct self-learning programming or extremely sophisticated six-axes versions with point-to-point programming, self-learning, off line or external systems. CMA Robots are certified to be used in potentially explosive areas according to the ATEX regulations and the company is also working under ISO 9001/2000 Certification.
|
|
MOTOMAN offers the widest range of robotic products with the number of controlled axes ranging from 4 to 13, including application dedicated robots for welding, palletising, handling, painting and clean room applications, with payloads ranging from 3 to 600 kg.
MOTOMAN installs turnkey systems and customised manufacturing solutions with the highest level of quality.
All manipulators/robots are fully electrical controlled by servo power.
The latest control system is capable of synchronised motion & control of up to four robots or 36 axes in total.
MOTOMAN also offers service, maintenance and training.
MOTOMAN, the robotic division of Yaskawa Electric Corporation, has its European headquarters in Kalmar, Sweden and Allershausen, Germany.
Interested in knowing more? Please contact us!
|
|
From traditional application to electrostatic processes, Stäubli paint robots cover all needs for automated finishing. They operate in various industrial sectors:
-Woodplastics components for automotive industry (inside and outside),
-metal components for automotive industry (antifriction…),
-cycle industry (liquid, powder),
-wood industry,
-farming equipment,
-household appliance,
-consumer goods (TV sets, game consoles,…),
-aerospace,
-optics
MetalStäubli also presents a relevant offer for enamelling applications (plumbing and porcelain), gluing (spraying or extrusion), release agent applications…
|
|
The FANUC paint robot series is suitable for a wie range of painting and coating applications. They offer highest flexibility and precision to paint all sorts of materials such as plastics, metal, wood...
FANUC painting robots are ideal for many types of materials and applications:
• Automotive body (interior and exterior)
• Automotive parts
• Plastics (e.g. mobile phone)
• Wood
• Steel
• Anti-corrosion
• ... and many other
The Paint robot series is available in following models:
• PaintMate 200iA and PaintMate 200iA/5L with 5kg payload and 704mm and 892mm reach.
• P-50iA with 7.5kg payload and 1360 mm reach
• P-250iA/10S with 10kg payload and 2000 mm reach
• P-250iA/15 with 15kg payload and 2800 mm reach
|
|
Kawasaki Robots K-Series
The K-Series robots are designed especially for paint applications with a reach of 1240 up to 3014 mm. Therefore it is possible to realise space-saving cells as well as big painting lines in the automotive industry.
The special wrist technology allows a media feed directly through axis 5 and 6 and minimises the contures of the robot. Therefore it is possible to access narrow and hard to reach areas.
All K-Series robots are ATEX certified.
|
|
The K Series line of painting robots was developed with our "Simple and Friendly" design concept. With eight explosion-proof models available, Kawasaki has a robot that will suit any robotic painting application from small paint cells to complete multi-robot automotive finishing systems.
The new K Series paint robots are loaded with features yet easily installed, integrated, and programmed allowing for rapid production start-ups.
|
|
|
|
|
|
Motoman EPX2900 Paint Robot
Versatile Paint Robot
The EPX2900 robot provides versatility and superior performance for standard industrial, automotive and aerospace coating and dispensing applications. It is ideal for painting automotive bodies and plastic component parts, agricultural equipment and other machinery and large parts. The high-speed EPX2900 creates a smooth, consistent finish with outstanding efficiency. It is Factory Mutual (FM) approved for Class 1, Div. 1 use in hazardous environments.
The EPX2900 robot has a 70 mm (2.76") diameter hollow wrist that facilitates mounting of spray equipment. Interference between the hose and parts/fixtures is avoided, ensuring optimum cycle time and robot reach/access. Optional devices such as 24-color change valve (CCV), flushable gear pump (FGP), flushing unit valve and master valve can be mounted on the upper arm resulting in reduced cycle time and less wasted paint.
The EPX2900 robot has a 20 kg (44.1-lb) payload capacity, 2,900 mm (114.2") reach, and ±0.5 mm (±0.02") repeatability. The EPX2900 is available in a floor-mounted configuration.
|
|
|
80% of dirt and moisture is tracked into buildings on the soles of visitors’ shoes. Nomad™ Entrance matting by 3M is designed to stop it at the door, maintaining a clean welcoming entrance. It reduces accidents from slips and trips too, protects your floors from avoidable wear and tear, and plays a vital role in reducing cleaning and maintenance costs. Durable and easy to clean, our entrance matting comes in a wide range of attractive designs to complement your interior décor.
|
|
|
|
|
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface
Comfortable non slip covering resistant for high traffic.
Environment: In wet or dry conditions for risk prevention and safety. Chemical characteristic: Elastomeric polyurethane complex poured onto a polyester rotproof non-weaved undercoating. Thickness: 2.1mm Granule: Non abrasive flexible granules 800µ Weight: 2.5kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 55
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 40% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 stuck application on surface M0 non insulating (LNE).
Classification building according to NF EN 14041 (LNE) CP1 S1.
|
|
|
|
|
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: abrasive granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 105
Coefficient on wet ground : 80
Classification R13 to standard DIN 51 130
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 4% before breaking.
Simple maintenance: Regular cleaning with water and household detergents.
|
|
|
|
|
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface.
Non slip covering flexible, comfortable and conformable.
Environment: In wet or dry conditions for risk prevention and security. Chemical characteristic: Elastomeric polyurethane complex very flexible. Thickness: 1.6mm Granule: Non abrasive flexible granules 200µ Weight: 2.4kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 66
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 11.5daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Extention = 75% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 in application glued on surface M0 non insulating (LNE).
|
|
|
|
|
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: Non abrasive flexible granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 65
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 20% before breaking.
Simple maintenance: Regular cleaning with water and household detergents.
|
|
Transit Rubber flooring is highly slip retardant and can mitigate the risks of slips and falls in high traffic areas. It is recommended for floor coverings in areas such as ramps, restrooms and concourses. Due to its soft rubber base it acts like anti-fatigue flooring, making it the ideal choice for the transit industry.
Transit Rubber flooring requires less maintenance than most other flooring hard surface floorings and carpets. It is scratch resistant and can be cleaned easily with widely available cleaners. There is no need for waxing polishing or scrubbing. Transit Rubber flooring is available in a wide range of colors and designs to make sure that your surroundings look just the way you want them. We also give our customers the options of ordering custom colors thereby providing them with the opportunity of total satisfaction.
|
|
Two-component reference resin (100% dry extract, no solvent, no odour): variable thickness and numerous finishes possible depending on your specifications.
High resistance (performance classification No. RT00-072 by the CSTB) to traffic, to abrasion and to chemical products ("sealed" floors). High adherence of epoxy.
For heavy duty flooring indoors (or outdoors with an application of Topcolor) made of concrete or with an old epoxy resin coating:
- easy application (two roller-applied coats recommended),
- or applied by our technicians for many different thicknesses and finishes.
1 coat of Neopox = 4 coats of conventional floor paint.
|
|
TBS, for an increased security of the passages pedestrians on blade of terrace wood in moist environment or dryness. According to the measurement of comparative roughness of a Essai surface to pendulum SRT normalizes NF P 98831-4. Value of coefficient of friction in moist environment: 38 for a wood in IPE grooved against 61 for the TBS 21.
Coating TBS brings a durable solution and effective on the floorings wood in natural environments (footbridges of crossing, let us bridge, slopes, terraces)
A preventive solution adapted for pedestrian installations with great traffic.
A recommendation intended for the ERP and roadway systems, local government agencies, Architects and Study Bureau.
|
|
Flexible polyurethane resin
Two-component polyurethane resin (100% dry extract, no solvent, no odour) recommended for the food industry, hospitals and clinics, offices and civil administrations.
Flexible and comfortable to use with a very high resistance to scratches, shocks and dilute acids: ideal for industrial, professional or pedestrian traffic.
For flooring indoors (or outdoors with an application of Topcolour) on untreated or coated concrete (epoxy, polyurethane) old or porous floor tiles, asphalt or tar.
Application (maximum 2 mm thick) applied with a roller or serrated spreader for a self-smoothing coat.
|
|
100% solids (no volatile organic compounds) self-leveling floor coating that can be applied to smooth or mildly spalled concrete, producing an extremely durable and attractive chemical-resistant finish.
KEY FEATURES
* Silica aggregate can be added to rebuild floors that need a “high build” coating of 1/8” or greater
* Safe-T-Grit 300 or Anti-Skid Silica (food grade) can be added to the mixture to provide a non-skid surface
* Acceptable for use in meat and poultry plants
|
|
| ... products without technical information |
| |
|
|