|
|
| ... products without technical information |
| |
... see all the products in the category
Panel PCs
|
OPTISPARK is the integrated control system developed in cooperation with Cannon AUTOMATA. It consists of two sections: an integrated control system and the user panel (Graphic terminal).
The integrated control system performs many functions usually carried out by several components such as steam pressure, water level, alarm data acquisition suppliers, and it sees to thermal efficiency with the aid of the most advanced control systems: combustion controller through electronic cams, control of the oxygen trim, of the flue gas re-circulation and of the air professional fan by means of an industrial inverter.
The H.M.I. features are: synoptic screens with multi-language
texts; high-resolution colour manufacturers of touch screen display; real-time and historical tracking of selected process trends; alarm reports log; navigator system; multilanguage editor.
OPTISPARK connects to the modern communications systems: it sends SMS and e-mail in case of alarms event; it is displayed on both the Intranet and the Internet; it connects to supervision systems via OPC server.
OPTISPARK's main benefits are: the performance equivalent to the most advanced DCS systems at a lower cost, the optimised combustion, the reduction of environmental impact, of fuel and energy consumption, and of the time for starting and checking the professional boiler. |
|
FEATURES
- Lighted, supertwist, 20x4, LCD display.
A wide-temp LCD display or a vacuum-fluorescent display (VFD)
are available as options.
- 24- or 40-key keypads with professional software-controlled shift and
status LEDs.
- EIA-232, EIA-422, EIA-485 or 5-volt Buffered serial interfaces. Each interface supports software handshaking.
- 512 Kbytes (1024 Kbytes optional) of nonvolatile professional flash memory; 256 Kbytes (768 Kbytes optional) available for user program and data storage.
- Handheld with battery back housing
- Meets NEMA-12/13 requirements.
- User-programmable operator interface terminal for applications where
a dumb terminal is not suitable.
- Simple, but powerful BASIC programming language allows you to easily
add custom functions to the terminal.
- An optional real-time clock can be purchased to execute elapsed-time
or time-of-day event code and timedate stamping.
- An optional secondary serial port is available. Communication through
this port is controlled by your software.
- The QTERM-R55 uses a switching control and operates from 8 to 32
VDC. |
|
| ... products without technical information |
| |
GP Pro EX : "all-in-one" Software; screen creation software for new generations of IHM, API and PC.
- Switches, lights, buttons, displaying/keyboarding of data numerical/alphanumeric.
- Alarm management.
- Recipes management.
- Data sampling.
- Graph management with historic data.
- Weekly calendar.
- Password management.
- Data storage on CF card.
- Data export --> PC
- Multi-language management.
- Multi protocoles simultaneously (4).
- Compatibility of projects developed with GP Pro PBIII. No limit on variables.
- Logic program integrated with screen management.
- Simulation. |
|
Wonderware's world-famous, award-winning InTouch® HMI software for visualization and industrial process driver offers outstanding ease of use and simple-to-configure graphics. Version 9.5 provides significant enhancements that result in tremendous improvements in both operational and engineering productivity. Powerful wizards and the new Wonderware® SmartSymbols enable users to quickly create and deploy customized applications that connect and deliver real-time information.
InTouch applications are flexible enough to meet users' immediate needs and can scale to accommodate their future requirements, while retaining the value of earlier engineering investments and efforts. These versatile InTouch applications can be accessed from mobile devices, thin clients, computer nodes and over the Internet. In addition, the open and extensible InTouch HMI offers unrivaled connectivity to the broadest set of automation devices in the industry. |
|
| ... products without technical information |
| |
CitectHMI is an entry professional level INDUSTRIAL HMI (Industrial human machine interface) professional software designed for OEMs. Based on CitectSCADA, CitectHMI is ideal for both Machine and Professional panel OEMs who wish to gain a competitive advantage by leveraging the strength of a world-class HMI in their product offering.
With Citect's HMI software, OEMs can:
- Leverage the Citect brand.
- Get a price competitive solution.
- Create a flexible solution that can be tailored to your end user needs.
- Use Citect Professional Services to help configure your CitectHMI and ensure speed to market.
Citect's HMI software is designed for the special needs of OEMs:
- Machinery, plant and equipment manufacturers who require a flexible, easy-to-use operator interface solution
- Manufacturers of PC-based suppliers of data acquisition systems that need expanded functionality (professional displays, trending, alarming and historians) in their product offering.
- Operator Panel Builders that require a flexible, branded customizable software professional interface to differentiate their hardware offerings.
|
|
New Version 2.51 - Faster and Easier to Develop in than any other Level 2 HMI!
Panel Tool Library for fast and easy screen development (NO scripting required)
Life-like Graphic Capability -Free form animation, unlimited colors and advanced features such as gradients, transparency and more.
ActiveX Third Party Tool Support -Plug & Play support for vision, trending, media players and other third party tools.
Advanced Multi-Language Support -Designed specifically for OEMs who sell and maintain machines all over the world
Easy E-Sig tools simplify compliance with FDA Regulations
New Navigation Panel feature allows rapid development of large applications
Recipe Management - including Nested List capability!
Advanced Communications
- Includes 60+ communication drivers at no extra charge!
- OPC Client Interface - can communicate to ANY OPC Server
- OPC Tag Server -ALL tags are available to be served to an OPC Client. |
|
CitectHMI is an entry professional level INDUSTRIAL HMI (Human machine interface specification) professional software designed for OEMs. Based on CitectSCADA, CitectHMI is ideal for both Machine and Professional panel OEMs who wish to gain a competitive advantage by leveraging the strength of a world-class HMI in their product offering.
With Citect's HMI software, OEMs can:
- Leverage the Citect brand.
- Get a price competitive solution.
- Create a flexible solution that can be tailored to your end user needs.
- Use Citect Professional Services to help configure your CitectHMI and ensure speed to market.
Citect's HMI software is designed for the special needs of OEMs:
- Machinery, plant and equipment manufacturers who require a flexible, easy-to-use operator interface solution
- Manufacturers of PC-based industrial data acquisition systems that need expanded functionality (industrial displays, trending, alarming and historians) in their product offering.
- Operator Panel Builders that require a flexible, branded customizable software professional interface to differentiate their hardware offerings.
|
|
Win GP, Runtime for PC : the screen created by GP Pro EX can be used in the panel computer.
- Screen editor for panel computer.
- Compatible with GP Screen data.
- Multi-driver supported with various host controller.
- 3000 variables / page
- All protocols available (Unitelway, modbus série and TCP, S7 Ethernet).
- Routines import/export of variables --> soft windows. |
|
| ... products without technical information |
| |
The "Entry Level" MiniOCS Integrates Screen, PLC, Network and I/O "All in One" Product.
The Standard MiniOCS comes with a single Integrated I/O module which provides a fixed level of factory fitted I/O from our vast range of Smartstack cards. The Screen is a 2 line 20 character backlit LCD.
The MiniOCS SX is a custom build product in which you can select upto 2 cards to be factory fitted. Your distributor can provide you details of these options.
Instead of using Separate components (PLC, HMI , Network and I/O) to form a solution , Horner has integrated this functionality into a single product – the Operator Control Station (OCS).
The OCS provides a complete solution and is easily programmed by a SINGLE software package called CSCAPE which allows screens to be easily embedded in the Logic Programme whether it is LD, IL, ST , SFC or FBD it is incredibily easy to use.
The MiniOCS is just part of a wide range of OCS products - from the Mini to a 12.1" Colour Touchscreen - all programmed by the single software package |
|
The Latest in the OCS Range Integrates Screen, PLC MANUFACTURERS, Network and I/O "All in One" Product.
The OCS NX has the following features:-
- 128x64 or 240x128 Pixel Backlit LCD Screen.
- Embedded Ethernet.
- Optional Fieldbuses.
- Compact Flash.
- Smartstack Interface.
- 2 Serial Ports.
- USB Programming Port.
- Fibre Optic Interface.
- Integrated Fast Industrial counter I/O.
- Membrane with Function Keys.
- Optional Touchscreen.
- Optional Integrated Base I/O.
Instead of using Separate components (PLC, INDUSTRIAL HMI , Network and I/O) to form a solution , Horner has integrated this functionality into a single product – the Operator Control Station (OCS).
The OCS provides a complete solution and is easily programmed by a SINGLE professional software package called CSCAPE which allows professional screens to be easily embedded in the Logic Programme whether it is LD, IL, ST , SFC or FBD it is incredibily easy to use.
Contact us for more Pre Release Information |
|
AGP3000 Series, Touch Manufacturer of plcs : display, operation and control functions : the "all in one" range.
- 15 models of touch PLCs, 5 screen sizes (5.7inch/7.5inch/10.4inch/12.1inch/15inch).
- TFT colour screens (65536 colours) or STN (4096 colours), B&W.
- DIO type (6 inputs and 2 outputs) or CAN open Network (512 bit I/O ) or Flex Netwotk type (512 bit I/O ).
- Interfaces : Ethernet, USB, CF-card, serial Interfaces , very powerful CPU.
- Every protocol available on the AGP series can be integrated into the LADDER (Modbus, Untitelway, MPI, Sysmac, Profibus...). |
|
Remote terminal (Transportable numeric controller)
Ideal solution for the user who needs to be near the organs on motion during machine’s tooling. The wide 8.4” professional touch screen display is managed directly by the graphic board on the controller using a LVDS interface which allows to remote the terminal maximum 10 metres. The terminal has an emergency button with double contact, “dead man” button, a switch with key and flexible multipolar cable for mobile laying. Potentiometer manufacturers to adjust axis overfeed on request. |
|
The Colour Touch range integrates a screen, PLC SUPPLIER, Network and I/O into an "All in One" product.
Instead of using separate components (PLC, HMI , Network and I/O) to form a solution , Horner has integrated this functionality into a single product – the Operator Control Station (OCS).
The OCS provides a complete solution which is easily programmed by a single software package called Cscape. This allows screens to be easily embedded in the Logic Programme whether it is LD, IL, ST , SFC or FBD.
The screen update is very fast due to the absence of a serial link from screen to PLC..
We also provide a vast range of I/O and Communcation modules including popular Fieldbus Master and Slave modules.
Our modules include the following features :-
- Screens ranging in size from 5.7" to 12.1".
- 1/4 VGA, VGA and SVGA formats in STN or TFT.
- Configurable function keys.
- High speed Screen Update and Logic Scan.
- Integrated Ethernet and Compact Flash options.
- All programmed by a single IEC61131 compliant software package - Cscape.
- Vast range of I/O Modules.
- Low cost Fibre Optic I/O Base available.
- 3 Serial Ports.
- Fieldbus Modules available.
|
|
Compact :
It is a compact, palm sized controller in
W130_H104_D70.5mm (main body only)
that efficiently utilises your workspace.
In addition, it is equipped with a 3.8 inch
LED to display graphical data as well as messages.
As this unit professional displays in two colours, amber and red, it can be utilised as an alarm, etc.
All-in-One :
This is a hybrid cost performance machine. Display,
operation and control functions are integrated into 1 unit that saves wiring and space
and also reduces the number of electric parts to connect with.
Multiple:
Equipped with 12-point DC inputs and 6-point transistor outputs,
it is compatible with special I/O.*
With acceleration and deceleration pulse output at a maximum of 65 kHz
and high-speed professional counter function performing at 100kHz as standard,
it has achieved sophisticated control functions. (*Possible to use 4-points at maximum).
Scalability :
With the EX module I/F, 2 sets of 13 types of EX modules can be added on.
That enables a high degree of customisation, more than 100 combinations,
for a diversity of needs and future expansions. |
|
Jazz™ SUPPLIERS OF PLC HMI:
Much more than a "smart relay"
The new Jazz™ by Unitronics is a PLC that includes on-board I/Os plus a full-function Operator Panel with numeric keypad. It enables users to replace the "smart relays" with a smarter, more powerful device, while keeping the same low budget.Jazz's™ PLC capabilities include 24K (virtual) of Ladder programming, functions such as math, store/load, compare, interrupt and loops.
The Jazz's™ fully-functioning HMI provides 60 user-designed screens, an alpha-numeric keypad and a multi-lingual display. The HMI helps our customers boost productivity by displaying operating instructions, system-fault messages and conditional data.
Jazz™ features a variety of communication options, including SMS messaging, Remote Access utilities, and PC access via MODBUS or OPC/DDE professional servers.
This unique combination of features, along with the Jazz's™ remarkably low price make it perfect for any application- from simple electric boards to complex production equipment. Its High-speed inputs, combined with remote communication options make it the right choice for water and agriculture applications. Industrial lighting, automatic barriers/doors and air conditioning can also be easily and economically controlled by the Jazz™.
|
|
| Programmable Logic Controllers, along with easy-to-use Support Software, are available to flexibly handle applications from small-scale equipment to entire production stations with Programmable Logic Controllers such as those in the SYSMAC CJ1, CS1 and other series. |
|
PLC SUPPLIERS 102
6" black and white LC-display 320x240 pixel
2 x 32-bit-processor - power
S5 compatible PLC
ergo button design
horizontal and vertical construction shape
all important field bus interfaces
Description
Wöhrle has launched a new compact PLC to the marked named PLC 102. This is a numerous renewal of an already multiple proved operation and controlling unit for simple up to middle tasks of automation and monitoring of machines and equipment.
This PLC belongs to a generation of controlling systems which can related more to the classic data processing units,
for example input of processing data, HMI and communication. This unit is furnished with integratedgraphic-able LC-Display and film professional keyboard and has two modern separate processing units in 32-bit format for PLC and HMI (interface terminal). Both the processing units are connected with a fast and simple interface. Due to this fact the processing unit is able to access to all kinds of data of the PLC including the processing picture-copy. The controlling part of the PLC 102 is to be programmed with Siemens STEP 5, the programming of the graphic part is to be done by means of one of the well-known high-level programming languages at the PC.
|
|
The software integrated development environment for drive-integrated Manufacturer of plcs. The 9300 Servo PLC and Drive PLC are both programmed by means of the Drive PLC Developer Studio (DDS) software integrated development environment. There are five different editors for use in conjunction with the IEC 61131-3 programming languages as well as an extremely powerful CFC editor. The built-in visualisation feature enables straightforward display of processes so that all the important information is available at a glance during commissioning.
|
|
The software integrated development environment for drive-integrated Manufacturers of plcs. The 9300 Servo PLC and Drive PLC are both programmed by means of the Drive PLC Developer Studio (DDS) software integrated development environment. There are five different editors for use in conjunction with the IEC 61131-3 programming languages as well as an extremely powerful CFC editor. The built-in visualisation feature enables straightforward display of processes so that all the important information is available at a glance during commissioning.
|
|
|
