|
|
PLEASE USE ENGLISH FOR ALL ENQUIRIES.
Enquiries written in other languages will not be answered.
|
|
Mini reducer under casing CSF
A component last generation (standard HFUC) associated with a powerful bearing of exit (at 4 contact points). From 20 with 48mm for a couple max from 1,4 to 28 Nm.
Benefit produced:
* Reducer with null play. It is particularly compact with a bearing of exit at 4 contact points and a strong integration of the reducer in the casing
* Particularly compact with a bearing of exit at 4 contact points and a strong integration of the reducer in the casing.
Characteristics produced:
* C max from 1,4 to 28 Nm
* Report/ratio of reduction from 30 to 100
* Diameter X length of 20x17 with 51x45
* Very high compactness (component last generation) and bearing of exit at 4 contact points.
* 3 versions: - adaptation engine in entry and flask of exit (2XH-F),
- adaptation engine in entry and output shaft (2XH-J),
- tree of entry and output shaft (1U)
Sectors of use:
* Robotics,
* Special machines,
* Semiconductors,
* Machines of assembly.
|
|
The POSIRED 2 range with its high degree of standardization and consistent modularity ensures flexibility and short delivery times. A large number of standard options with a great variety of versions guarantee optimal adaptation in almost every area of mechanical and plant construction. An extensive range of accessories in-creases the adaptability of this gear reducer. As a standard, fans, cooling coil, external oil cooler, heating rods, torque supports, engine consoles, sub-constructions and operation monitoring systems are available.
Technical Data:
Torque (T2 nominal): 1,000 up to 800,000 Nm
Transmission Ratio: 1.25 up to 710 iN
Power Rating: up to 4,400 kW
|
|
Splitter gearboxes
Large or divided flow demand
Hydraulic systems with a number of flows can easily be created with SUNFAB piston pumps mounted on a splitter gearbox.
The SZ-series gives several options regarding the flow with its two separate transmission ratios 1:1.18 and 1:1.54. The splitter gearbox have two pump ports for direct mounting
|
|
Torque ratings consistently high, gear ratios in close progression, numerous mounting options along with compact dimensions will ease the engineering of any application.The housing from nodular cast iron ensures robustness even in the harshest environment and the class of precision the gear are machined into helps producing an extremely quit and vibration-free operation.
|
|
The high quality of G.M. products is guaranteed through the accuracy of the best quality emploied materials,together with the accuracy in the manufacture.
High quality products are the premium concern at G.M.
The possibility to produce for stock, allows to deliver in a short time both gearboxes and spares.
WORM GEARS AND GEARED MOTORS with 2 output Shafts
MRV2U SERIES
P1 0,25 ... 18,5 kW
Rt 1:7 ... 1:100
Mt2 85 ... 1120 daNm
|
|
The new and innovative range of helical and bevel-helical units combines the most advanced design concepts and performances in full compliance with international standards (ISO, DIN, AGMA, etc.) for calculating gear geometry. We have focused our attention on researching the simplest and most standardised design and production methods with the aim of making production even faster and delivery times even shorter.
The high power to weight ratio of all units, combined with low volume, enables perfect installation in the most critical situations. One of main features of this range of gear units is the great versatility of applications and mounting, in terms of both position and fixing on site.
New concepts have been used to improve the noise level in a consistent way, by grinding all gears sets, both the helical and the Gleason spiral bevel type gears.
Because of higher capacity, particular consideration has been given to efficiency and housing surface area to guarantee a convenient heat dissipation in most cases.
|
|
Choose From More Than 25,000 Coupling Combinations Of Types, Sizes And Bores...
Most Available From Stock!
KOP-FLEX pioneered the coupling industry with the invention of the very first gear coupling, known as the FAST'S® gear coupling. KOP-FLEX offers a variety of standard off the shelf and custom designed variations. The couplings are widely available from EPT® warehouses and distributors throughout the world. Standard couplings are lubricated (gear or grid type) and non-lubricated (disc or elastomer resilient type)
|
|
Falk%u2122 Drive One® Universal Drives
Ratios: 1.25:1 to 140:1 Power: 20 to 1,900 kW (25 to 2,500 hp) Torque: 5 to 94 kNm (58,000 to 840,000 lb-in)
9 sizes
Horizontal or vertical output
Solid or hollow output shafts
Base or shaft mounted
Exclusive 6-sided mounting for unmatched versatility
Many pre-engineered accessories to provide complete application solutions
Lowest lifetime cost
|
|
Paramax® helical and bevel gears of the standard Paramax range and the various special Paramax versions are the outcome of six decades of experience in drive engineering. By virtue of the modular design, they permit use under difficult and severe conditions even in the most diverse applications. The Paramax® product range consists of the standardized 9000 series as well as the special SFC designs for cooling tower drives and compressors and SEC for extruder drives.
With 26 sizes in the Paramax® 9000 series, an application can be precisely designed according to the performance, torque and velocities, thus ensuring a long service life and cost effective, powerful operation.
|
|
High versatility
- 5 sizes that offer a wide range of possible mounting positions.
- Gearboxes provides with trains of gears at 2 or 3 stages of reduction.
High performances
- Power from 0.75 kW to 83 kW
- Max torque 4015 Nm
- Ratios up to 118/1.
High reliability
- Strengthened casing for heavy duty applications.
- High resistant gears made in top quality steel.
- Largely proportioned bearings.
- High quality sealing for improved leaking prevention.
|
|
Fields of application for these gear reducers are rolling mills, profiling plants, crushers, double-shaft mixers, kneaders, compactors and presses. Applications of this type require two contra-rotating drives, such as provided by the POSIRED TS gear. The various designs, installation possibilities and optional accessories from the basic range of POSIRED 2 can also be used for the double shaft gear POSIRED TS.
Technical Data:
Torque (T2 nominal):1,000 up to 110,000 Nm
Transmission Ratio: 5 up to 140 iN
Centre distance (a): 122 up to 656 mm
|
|
REDUCER CPU-M
Reducer under casing associating a reducer without play Harmonic Drive with a bearing of exit of large diameter with cross rollers.
Range CPU is a family of product, the version - M adapts to all the engines of the market. We adapt the hub to your driving shaft. The driving whole + reducing under casing CPU-M is particularly compact.
Benefit produced:
* Adaptability with all the engines of the market.
* Compactness of the assembly.
* High strength of the bearing of exit of large diameter to cross rollers
Characteristics produced:
* Couples of exit until 1840Nm,
* Radial force on the bearing of exit until 38.400N, length max 84mm.
* Utmost precision,
* Compactness of the assembly, adaptability to all the engines.
Sectors of use:
* Robotics,
* Machine tools,
* Special machines
|
|
|
All the gears are housed in between metal plates & closed by plastic dust cover. All bearings are permanently lubricated and therefore require no maintenance.
|
|
Lifting gears and conveyor drives in which the drum and driving motor are arranged in parallel require a step-down gear unit with a corresponding large axle base. The lifting gear units in the POSIRED N series are designed for this application and ideally bridge the given distance between the motor and drum. The development of this series is based on widespread experience in crane engineering, belt conveyor drives, winches, and hoisting devices. The accessories needed for this application such as elastic clutches, barrel clut-ches, brakes and substructures, can be supplied together with the gear reducers.
Technical Data:
Torque (T2 nominal): 8,000 up to 800,000 Nm
Transmission Ratio: 12.5 up to 500 iN
|
|
Atomizers serie
P.T.O. powered generators serie
Feed processing and handling machinery serie
Hose reels serie
Hydraulic applications serie
Miscellaneous applications serie
|
|
| ... products without technical information |
| |
|
|
