|
|
|
|
|
|
The new CAMSIZER generation is a compact laboratory instrument for simultaneous measurement of particle size distribution and particle shape. Using the measuring principle of digital image processing, two specially rated digital cameras measure pourable solids in the range from 30 µm to 30 mm. The unique scanning of all particles with the new advanced software means that for the first time it is possible to obtain screening results directly without any additional adaptation procedures. This makes CAMSIZER the ideal time- and cost-saving alternative for incoming and outgoing controls and for in-process quality control.
The AutoSampler - option for the CAMSIZER allows a high sample throughput in automatic operation mode.
Product Advantages:
- NEW: improved comparability to sieve analysis , also for multimodal distributions
- NEW: optimized, intuitive software
- NEW: additional shape parameters (e.g. surface analysis)
- NEW: several language versions (German, English and other languages)
- Results are saved in more than 1,000 size classes
- Simultaneous analysis of particle size, shape, number and density
- Greatest possible accuracy and reproducibility
- No-contact, non-destructive measurement
- Very short measuring time (2-3 min.)
|
|
FRITSCH Particle Sizing Instruments offer state-of-the-artlaser technology for an unique price performance ratio, for each particular area of application and utilization. An extra plus: the special, patented FRITSCH measuring method by laser diffraction inside the convergent laser beam. Your advantage: a simple continuous adjustment of the measuring area as well as up to now unknown number of measuring channels.
With the different systems and the possibility to combine corresponding components, you can configure a measurement system that is precisely adapted to your needs, with reliability and efficiency guaranteed by FRITSCH as a specialist in particle measurement technology.
With its flagship NanoTec for example, FRITSCH offers the option of shape analysis as well as a measurement range from 2000 µm down to 0.01 µm – the entry into the nano range.
Catch up on the state-of-the-art laser technology by FRITSCH.
|
|
|
|
|
|
Analytical Imaging - Morphologi® G3, Sysmex FPIA-3000, SyNIRgi™
Particle shape and chemical composition image analyzers
Morphologi® G3 is an advanced particle characterization system for size and shape analysis. With a fully automated, dry sample dispersion device, and sophisticated data analysis software, it delivers reproducible, statistically significant data, with minimal manual intervention. Capturing microscope quality images of hundreds of thousands of particles in just a few minutes, Morphologi® G3 measures 20 different size and shape parameters.
Sysmex FPIA-3000 is a flow cytometry-based system using image analysis for the fully automated characterization of the shape and size of particles suspended in liquid media. Using a CCD camera and strobe illumination, it produces images of each suspended particle. With a choice of configurations, it measures particles from 0.8 - 300 µm using as little as 1 ml of sample.
The SyNIRgi™ near infrared chemical imaging (NIR-CI) system provides analysis of the nature and spatial location of chemical components within a sample. It combines the species identification capabilities of conventional near IR spectroscopy with digital imaging and is ideal for non-destructive routine analysis of samples with spatially complex arrangements of chemical species. Chemical imaging's application to solid dosage forms, allows determination of content uniformity, blending efficiency, polymorph distribution, moisture content, contaminant location, non-destructive coating thickness, and high-speed counterfeit detection.
Select Morphologi G3, Sysmex FPIA-3000 or SyNIRgi from the link.
|
|
|
|
|
|
|
Micromeritics’ first product addition under its Particulate Systems brand is the new Particle Insight Dynamic Image Analyzer. The Particle Insight is ideal for applications where the shape of raw materials, not just the diameter, is critical to the performance of the final product. The Particle Insight offers up to 28 different shape parameters analyzed in real-time in either aqueous or organic solvent suspensions. The system operates in a range suitable for a wide variety of industrial, biological, and geological specimens from 3 µm up to 300 µm in its standard configuration. Its unique recirculating sample module and precision optics are designed to acquire and report statistically valid measurements quickly, an essential quality control capability in many manufacturing processes. In addition, the Particle Insight fulfills the requirements of FDA 21 CFR Part 11 regulations. Particle Insight features include the ability to track sample shape changes over time as well as the capability to store a collection of particle images. The user also has the option of viewing only those particle images that meet any combination of the analyzer’s 28 shape parameters.
|
|
The LA-930 features all the functionality of HORIBA's acclaimed LA-910 and LA-920 particle size analysis systems, together with new and improved software and hardware, to help users solve the most difficult application issues.
As the needs of users have become more stringent and the information more useful across a broader range of industries, HORIBA's superior technology has provided solutions that allow unparalleled performance combined with an ease-of-use that sets it apart.
|
|
General description:
The sample feeders for dry samples and granulate material can be operated either with the Abakus particle counter or a PC measuring card.
The PZG 5 is applied for particle analysis in dry samples of 2-2500µm. The dry samples are fed to the sensor by means of a brush system.
The PZG 6 is applied for measuring granulate material and ripple grain. The samples are fed to the sensor by means of a ripple chute.
The evaluation program Log and Show 2.x allows you to control the measurements and transmit data to the PC.
|
|
|
|
|
|
Malvern Instruments presents the Zetasizer series
Size, zeta potential and molecular weight characterisation for Nanoparticles and Proteins
The Zetasizer range uses light scattering techniques to measure hydrodynamic size, zeta potential and molecular weight of proteins and nanoparticles.
Unequalled sensitivity and versatility by using the latest technology:
Patented NIBS optics improves sensitivity and size range /concentration range in the Zetasizer Nano S and ZS
M3-PALS is the leading technology for measurement of Zeta-potential.
Single-mode fibre, 50 m W laser and focused optics enable measurements of unrivalled quality of Proteins and other biomolecules.
Zetasizer Nano - the versatile solution
- Provides characterization of the size of nanoparticles emulsions and proteins, for dilute and concentrated samples, as well as zeta potential and molecular weight. Coupled with the MPT-2 Autotitrator, pH conductivity and additive trends can be automated.
Zetasizer µV - dedicated to protein molecular size analysis
- Targeted at applications including: optimizing protein crystallization conditions; measuring protein purity, determining proportions of aggregates and measuring absolute molecular weight
Zetasizer APS - for automation of size using micro well-plates
- Automates the size measurement of samples in 96- or 384-well microplates to improve personnel productivity.
Designed primarily for protein specialists, the Zetasizer APS is fully automated, simply requiring users to insert the plate and start a plate schedule. A graphical result display simplifies the assessment of large amounts of data in order to pick out trends and 'hot spots'.
|
|
The wish of operators and technologists in the wood-based panel industry to scan the raw density profile online during the running production has been regarded as impractical for many years.
By means of the GreCon Inline Raw Density Profile Measuring System StenOgraph, it is possible for the first time to scan the raw density profile, as one of the most important criteria of the quality of particle board and fibreboard, online after continuous presses.
This enables the operator to influence the raw density profile and thus the features of MDF and particle board during the production process.
Shorter running-in times of new production plants and during product changes as well as an optimised production process lead to substantial savings in cost and material while the panel quality is improved.
|
|
|
|
|
|
Portable Density Meter: DMA 35
The DMA 35 portable density meter measures the density and concentration of your sample and is characterized by the highest level of user friendliness. Its robust and lightweight design enables the use in numerous fields of application and its on-site operation in a wide range of work environments. This basic model enables the manual selection of measuring methods and sample IDs as well as wireless data exchange with a printer or PC. Therefore DMA 35 is an economic solution for general industrial and laboratory applications with constant or only occasionally changing measurement settings.
User friendliness
* Compact, lightweight design enabling one-hand measurement
* Easy operation, even when wearing protective gloves
* No-hassle measurement of hard-to-reach samples
* Large LC display with backlight for clear visibility of measuring results
* Measuring cell with inspection window and backlight
Robustness
* Rugged, leakproof housing design
* Designed for industrial and field applications
* Proven resistance of wetted parts against common samples
Wireless communication
* IrDA interface for data exchange with a PC and data export to a printer
Efficiency
* Storage of up to 100 sample IDs for easy sample identification
* Storage of up to 20 measuring methods
* Storage of up to 1024 measurement results including time stamp and sample ID
* Up to five programmable custom functions
* Two exchangeable 1.5 V AA batteries ensure long-term, reliable service
* Energy-saving mode for reduced power consumption provided
* Easy and fast replacement of the entire pump assembly
|
|
Concentration, Water Content and Dry Substance measured by microwaves
Your Advantages:
High selective sensitivity to water
High accuracy and long-term stability
even for difficult products
Simple installation, insertion directly
on the existing pipelines, vessels, chutes etc.
Simple start-up, system supported sample taking,
automatic calibration and graphic display
Accurate and reliable measurement
due to two highly stable PLL-synthesizers
and multi-frequency technology
Durable sensor measuring cells with wear resistant
smooth walled PTFE lining
Contactless measuring cell without installed
measuring antenna
High operational safety and standards of quality
|
|
|
|
|
|
|
The compact, rugged Thermo Scientific SGD-O is the most reliable non-contacting density gauge for monitoring fluid density, including PPG, PPA and SGU, in the oilfield during fracturing and cementing. Capable of enduring high shock and vibration yet lightweight, this advanced device features rapid response and high accuracy to improve consistency, safety and overall performance. Engineered to withstand the extreme moisture and high humidity of oilfield environments, it rapidly indicates variations in slurry density and proppant concentration during fracturing and cementing operations. The SGD-O is comprised of three components: the source and detector work together to measure the fluid density while the remotely located electronic transmitter provides a clear digital display of the measurement. This advanced gauge measures through any pipe thickness, with the detector providing response in three to five seconds and accuracy of ±0.1 pounds per gallon. The transmitter can be mounted up to 100 feet away from the gauge to ensure worker safety. It can be powered by a readily available 12 or 24 volt power supply and features quick disconnect connectors for cable and transmitters. The SGD-O is also easy-to-install and use and has minimal maintenance requirements.
|
|
|
|
|
|
PROCESS LOW FLOW RATE LIQUID IN-LINE DENSITY METERS DC-30 SERIES
LEMIS process uses the proven vibrating element technology which is widely accepted as the most accurate of continuous density measurement. It is based on the frequency changing of the sensitive unit and resistance of the built-in temperature sensor in dependence of characteristics of measured liquid. The oscillation period of the sensitive unit mainly depends on density and temperature of measured liquid.
Continuous monitoring optimizes, controls and manages the processes. DC-30 series has a variety of applications, where low flow rate does not allow to install standard high flow systems. PC connection allows distance control for the most critical parameters in such processes as organic synthesis and chemical reactions in reactors.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
|
|
|
|
PORTABLE LIQUID IN-TANK DENSITY METERS DM-250 SERIES
Portable Submersible Density meter DM-250.1 and DM-250.2 are best suited for liquid density and temperature measurements directly in the storage or process tanks (up to 30 meters depth). No labor extensive and errors critical sampling required. Instead, the sensor of DM-250.1 and DM-250.2 are submersed at any required level and record spot density and real temperature at that point directly in the liquid. The operation personal can get in minutes the average density in the tank and its density / temperature / level profile, for example, at every meter. DM-250.3 is best for situation when DM-250.1 and DM-250.2 could not be installed. Just take a sample that is over a hundred mililitres of sample and the equipment will give you the results in seconds! Hundreds of measurements can be stored locally and future transferred to a PC or printer via built-in Bluetooth connectivity.
Density determination directly in the tanks is faster, easier, more precise and cost effective comparing with conventional technique requiring sampling and use of glass hydrometers by qualified personal. That is why the DM-250 series portable density meters from LEMIS process have found wide application, first of all in oil industry upstream and downstream operations where control of quality (density) and quantity (mass) of petroleum products at movement and storage is very critical.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
|
|
|
|
Angle encoders
The term angle encoder is typically used to describe encoders that have an accuracy of better than ± 5" and a line count above 10000. These devices are used in applications such as NC rotary tables, swivel heads of machine tools, dividing apparatuses, high-precision angle measuing tables, precision devices in angular metrology, antennas and telescopes.
Rotary encoders
Rotary encoders from HEIDENHAIN serve as measuring sensors for rotary motion, angular velocity and also, when used in conjunction with mechanical measuring standards such as lead screws, for linear motion. Application areas include electrical motors, machine tools, printing machines, woodworking machines, textile machines, robots and handling devices, as well as various types of measuring, testing, and inspection devices.
With incremental angle encoders and rotary encoders, the current position is determined by starting at a datum and counting measuring steps, or by subdividing and counting signal periods. Incremental encoders from HEIDENHAIN feature reference marks, which must be scanned after switch-on to reestablish the datum. Incremental rotary encoders with commutation signalssupply the angular shaft position value - without requiring previous traverse - with sufficient accuracy to correctly control the phases of the rotating field of a permanent-magnet three-phase motor.
|
|
The RESR and SiGNUM RESM angle encoders feature a ±5 arc second scale graduated axially onto a stainless-steel ring. Available in a range of 20 diameters (from Ø52 mm to Ø550 mm), Renishaw's angle encoders have a low cross-section and a large internal diameter to position easily around large internal rotors, payloads or services.
The rings also feature a unique taper mount which corrects for eccentricity of the rotor/shaft and ensures excellent accuracy, offering easy and robust fine adjustment of the ring's form and all installation tolerances. In addition, the rings offer a very low moment of inertia ensuring that whatever the installation, the system can be positioned with minimal torque and maximum speed.
|
|
With the magnetic distance- and angle measuring systems of SIKO, compact single systems can be assembled. The challenges faced by measuring devices in extreme industrial conditions make great demands on their reliability and reproducibility. MagLine systems are mainly used for extremely precise tracking of linear and radial positions as well as speeds and angles. The contactless technology demonstrates its advantages in all kinds of applications, such as motor feedback or highly dynamic processes in particularly dirty environments.
Benefits:
- No-wear technology
- Insensitive to dust, chips, humidity, oil, fats, etc.
- Highly resitant to schock and vibrations
- Easy handling and mounting
|
|
Measurement Specialties develops innovative custom packaged solutions for rotary sensing applications using magnetic sensing technology. An encoder is a sensing device that translates either linear or rotary motion into a predictable electrical output.
Magnetic encoder technology has shown to be superior to existing optical encoder technology in areas of:
- Temperature range
- Contamination resistance
- Operational life
- Shock and vibration
- Critical assembly operations
- Cost
|
|
|
|
|
|
AC operated Rotary Variable Differential Transformers (RVDTs) measure rotary position up to +/-60degs. Like AC LVDT’s they contain no signal conditioning and are therefore chosen for their smaller size and use in hostile environments.
Description: RVDTs incorporate a proprietary non-contact design that dramatically improves long term reliability when compared to other traditional rotary devices such as syncros, resolvers and potentiometers. This unique design eliminates assemblies that degrade over time, such as slip rings, rotor windings, contact brushes and wipers, without sacrificing accuracy. High reliability and performance are achieved through the use of a specially shaped rotor and wound coil that together simulates the linear displacement of a Linear Variable Differential Transformer (LVDT). Rotational movement of the rotor shaft results in a linear change in the output signal, directly proportional to change in shaft angle, over ±60 degrees from the null position. The phase of this output signal indicates the direction of displacement from the null point. Non-contact electromagnetic coupling of the rotor provides infinite resolution, thus enabling absolute measurements to a fraction of a degree. The R30A and R36AS RVDTs are AC operated rotary transducers. AC excitation of 3 V rms results in a ratiometric AC output voltage that varies in direct proportion to the change in angular position of the transducer shaft.
|
|
| ... products without technical information |
| |
Announces 0 to 10 Vdc Voltage, 0 to 20mA Current, and Type K Thermocouple Inputs in Engineering Units
Portable, Handheld High Performance Design
Built-In Speaker and Earphone Socket
Over 100 Built-In Engineering Units to Choose From
RS232 PC Interface Allows User to Configure the Unit
High and Low Alarm, Programming
Command/Continuous Speech Mode Selection
Verbalises Signals While Connected to Other Measurement and Control Devices
Front Keypad Provides Input Selection, Command Talk and Volume Control
Powers From 2 "AA" Size Batteries or DC Adaptor Input (Batteries and AC Adaptor are Included)
Decorative Table Top Stand included for ease of operation
|
|
Programmable and recording measuring instrument for measuring and recording voltages, currents, power factors, frequencies, temperatures etc. in low–voltage power distribution grids.
Characteristics
- Inputs: 3 x voltage, 12 x current, 1 x temperature
- True root-mean-square (TRMS) measuring of voltage and current, real power factor (lambda) evaluation
- Current inputs for use of current probes and clamps with voltage output in 0,1 ÷ 3V AC range
- Supplied from the first phase measured
- Recording interval from 5 seconds up to 1 hour
- Recording capacity from days to months (according to record setting and memory size)
- Setting, data visualization and processing with Cetis32 program
|
|
F170
True RMS Digital Power Meter (3-phase)
The F170 is a True-RMS digital power meter including the energy integration function. This user friendly meter has many applications; appliance testing, checking industrial and commercial power systems, plant maintenance and inspection, and electric utility testing, etc.
Features
- CE-mark Certificated.
- 3 ¨ú digits, 4000 count display for power,
updates 4 times/sec. (6 digits display for
energy integrator.)
- True power, apparent power and reactive power.
- (AC to 750kW/kVA/kVAR) measurement.
- Power Factor (Cos ¥õ) [0.3 Cap... 1 ...
0.3 Ind] measurement.
- Energy (kWh, kVAh, kVARh) Integrator for
maximum 80 hours.
- 3-Phase adaptor (Optional Accessory).
- IEC 1010-1, CATIII600V safety protection.
- Time Stamp for the Energy Integrator.
- True-RMS reading.
- Auto ranging.
- MAX/MIN Record mode.
- Data hold.
- Auto-power-off.
|
|
Test Accessories for
- Electrician
- Laboratory and Education
- Test and Measurement Equipment
- Electronics
The complete product range for measuring, testing, connecting and experimenting
Our Safety Test Accessories are touch-protected according to IEC / EN 61010-031:2002
|
|
| ... products without technical information |
| |
|
|
|
|
This is the key tool for all professionals in HVAC and industry fields.
AMI 300 can measure, store up to 12,000 values and restore on PC (wireless communication) up to 6 parameters alternately.
Pressure, temperature, humidity, air quality (CO/CO2), air velocity and airflow (vanes or hotwire), tachometry.
For visual comfort, AMI has a large colored display and easy browsing is done thanks to its joystick on keypad.
Innovative and evolutive :
- AMI can be equipped with wireless probes supplied with a multifunctional key allowing measurement and settings.
- It can be equipped with interchangeable measurement modules which are individually calibrated and are automatically recognized by the instrument thanks to the Smart-plus system.
- These measurement modules are available for pressure, thermocouple temperature (4 channels), climatic conditions (hygrometry, air pressure, temperature) and current/voltage parameters.
- For instance, AMI can be equipped with several pressure measurement modules with different measuring ranges. This new system allows evolution according to measurements that must be carried out…
- On the same principle, all probes have the Smart-plus system and are therefore automatically recognized by the instrument. Probes are available with adjusting/calibration certificate.
* exept thermocouple probes
- A large choice of probes allows a step-by-step evolution of the instrument according to your needs : vanes Ø 14 mm, 70 mm and 100 mm, high resistance gooseneck–shaped hotwire, CO/.CO2, multifunction, high temperature hygrometry, RTD probes, thermocouple...
Join our distribution network all over the word....Contact us !
|
|
|
Kanomax anemometers can measure a wide variety of parameters to test ventilation rate. The parameters include air velocity, airflow, static pressure, temperature, and humidity of the indoor environment.
|
|
|
|
|
|
Specially developed for the supervision of clean-rooms, the CPE 300 is dedicated to measures of low pressure andor depression of air or neutral gases from 0/+10 Pa to -1000 /+1000 Pa.
The CPE 300 presents the advantage to become integrated perfectly into walls and to answer to the standard of cleanliness thanks to its stainless case (brushed or with lacquered).
It is equipped with 2 visual and audible alarms, with 2 reversers relays, of a big electroluminescent display and a process of autocalibration which guarantees in the time an excellent stability and a reliability of the measure in low as in high scale.
Thanks to its digital communication (RS 232 and Protocol Modbus RS 485), it offers the possibility of showing alternately (in addition of the measure of pressure) two other parameters resulting from temperature, humidity, velocity or airflow external sensors (KIMO).
Two innovative systems to facilitate the maintenance on-site :
· Its measuring element benefits from the SMART PRO system. It is individually adjusted and is automatically recognized by the device. Thanks to this process, it is possible to replace the measuring element in a simple and fast way without return of the sensor to the factory.
· The calibration in front face : this system allows to proceed to the calibration of the device without un-mounting it.
The sensor CPE 300 is so always operational !
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
ACCUBALANCE® AIR CAPTURE HOOD
The TSI Model 8375 Accubalance Capture Hood is a multipurpose electronic air balancing instrument for reading air volume flow at diffusers, and grilles. It is ideally suited for commissioning agents, facilities managers, health and safety specialists, test engineers, and test and balance professionals. This ultra light weight, ergonomically designed kit saves time and money while helping to create a healthy and energy efficient environment.
Applications include thermal comfort studies, HVAC testing, adjusting and balancing, as well as air volume measurements.
Features and Benefits
- Ergonomic design and ultra light weight for easy one person operation
- Detachable digital manometer for use in other applications with Pitot, air flow, temperature, velocity matrix, or relative humidity probes
- Back pressure compensated
- Multiple hood sizes available
- Bio-Safety hood kit available
Applications:
- Thermal Comfort
- HVAC testing, adjusting and balancing
- Air volume measurements
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
