|
|
|
|
|
|
The new CAMSIZER generation is a compact laboratory instrument for simultaneous measurement of particle size distribution and particle shape. Using the measuring principle of digital image processing, two specially rated digital cameras measure pourable solids in the range from 30 m to 30 mm. The unique scanning of all particles with the new advanced software means that for the first time it is possible to obtain screening results directly without any additional adaptation procedures. This makes CAMSIZER the ideal time- and cost-saving alternative for incoming and outgoing controls and for in-process quality control.
The AutoSampler - option for the CAMSIZER allows a high sample throughput in automatic operation mode.
Product Advantages:
- NEW: improved comparability to sieve analysis , also for multimodal distributions
- NEW: optimized, intuitive software
- NEW: additional shape parameters (e.g. surface analysis)
- NEW: several language versions (German, English and other languages)
- Results are saved in more than 1,000 size classes
- Simultaneous analysis of particle size, shape, number and density
- Greatest possible accuracy and reproducibility
- No-contact, non-destructive measurement
- Very short measuring time (2-3 min.)
|
|
FRITSCH Particle Sizing Instruments offer state-of-the-artlaser technology for an unique price performance ratio, for each particular area of application and utilization. An extra plus: the special, patented FRITSCH measuring method by laser diffraction inside the convergent laser beam. Your advantage: a simple continuous adjustment of the measuring area as well as up to now unknown number of measuring channels.
With the different systems and the possibility to combine corresponding components, you can configure a measurement system that is precisely adapted to your needs, with reliability and efficiency guaranteed by FRITSCH as a specialist in particle measurement technology.
With its flagship NanoTec for example, FRITSCH offers the option of shape analysis as well as a measurement range from 2000 m down to 0.01 m the entry into the nano range.
Catch up on the state-of-the-art laser technology by FRITSCH.
|
|
|
|
|
|
Analytical Imaging - Morphologi G3, Sysmex FPIA-3000, SyNIRgi
Particle shape and chemical composition image analyzers
Morphologi G3 is an advanced particle characterization system for size and shape analysis. With a fully automated, dry sample dispersion device, and sophisticated data analysis software, it delivers reproducible, statistically significant data, with minimal manual intervention. Capturing microscope quality images of hundreds of thousands of particles in just a few minutes, Morphologi G3 measures 20 different size and shape parameters.
Sysmex FPIA-3000 is a flow cytometry-based system using image analysis for the fully automated characterization of the shape and size of particles suspended in liquid media. Using a CCD camera and strobe illumination, it produces images of each suspended particle. With a choice of configurations, it measures particles from 0.8 - 300 m using as little as 1 ml of sample.
The SyNIRgi near infrared chemical imaging (NIR-CI) system provides analysis of the nature and spatial location of chemical components within a sample. It combines the species identification capabilities of conventional near IR spectroscopy with digital imaging and is ideal for non-destructive routine analysis of samples with spatially complex arrangements of chemical species. Chemical imaging's application to solid dosage forms, allows determination of content uniformity, blending efficiency, polymorph distribution, moisture content, contaminant location, non-destructive coating thickness, and high-speed counterfeit detection.
Select Morphologi G3, Sysmex FPIA-3000 or SyNIRgi from the link.
|
|
|
|
|
|
|
Micromeritics first product addition under its Particulate Systems brand is the new Particle Insight Dynamic Image Analyzer. The Particle Insight is ideal for applications where the shape of raw materials, not just the diameter, is critical to the performance of the final product. The Particle Insight offers up to 28 different shape parameters analyzed in real-time in either aqueous or organic solvent suspensions. The system operates in a range suitable for a wide variety of industrial, biological, and geological specimens from 3 m up to 300 m in its standard configuration. Its unique recirculating sample module and precision optics are designed to acquire and report statistically valid measurements quickly, an essential quality control capability in many manufacturing processes. In addition, the Particle Insight fulfills the requirements of FDA 21 CFR Part 11 regulations. Particle Insight features include the ability to track sample shape changes over time as well as the capability to store a collection of particle images. The user also has the option of viewing only those particle images that meet any combination of the analyzers 28 shape parameters.
|
|
The LA-930 features all the functionality of HORIBA's acclaimed LA-910 and LA-920 particle size analysis systems, together with new and improved software and hardware, to help users solve the most difficult application issues.
As the needs of users have become more stringent and the information more useful across a broader range of industries, HORIBA's superior technology has provided solutions that allow unparalleled performance combined with an ease-of-use that sets it apart.
|
|
General description:
The sample feeders for dry samples and granulate material can be operated either with the Abakus particle counter or a PC measuring card.
The PZG 5 is applied for particle analysis in dry samples of 2-2500m. The dry samples are fed to the sensor by means of a brush system.
The PZG 6 is applied for measuring granulate material and ripple grain. The samples are fed to the sensor by means of a ripple chute.
The evaluation program Log and Show 2.x allows you to control the measurements and transmit data to the PC.
|
|
|
|
|
|
Malvern Instruments presents the Zetasizer series
Size, zeta potential and molecular weight characterisation for Nanoparticles and Proteins
The Zetasizer range uses light scattering techniques to measure hydrodynamic size, zeta potential and molecular weight of proteins and nanoparticles.
Unequalled sensitivity and versatility by using the latest technology:
Patented NIBS optics improves sensitivity and size range /concentration range in the Zetasizer Nano S and ZS
M3-PALS is the leading technology for measurement of Zeta-potential.
Single-mode fibre, 50 m W laser and focused optics enable measurements of unrivalled quality of Proteins and other biomolecules.
Zetasizer Nano - the versatile solution
- Provides characterization of the size of nanoparticles emulsions and proteins, for dilute and concentrated samples, as well as zeta potential and molecular weight. Coupled with the MPT-2 Autotitrator, pH conductivity and additive trends can be automated.
Zetasizer V - dedicated to protein molecular size analysis
- Targeted at applications including: optimizing protein crystallization conditions; measuring protein purity, determining proportions of aggregates and measuring absolute molecular weight
Zetasizer APS - for automation of size using micro well-plates
- Automates the size measurement of samples in 96- or 384-well microplates to improve personnel productivity.
Designed primarily for protein specialists, the Zetasizer APS is fully automated, simply requiring users to insert the plate and start a plate schedule. A graphical result display simplifies the assessment of large amounts of data in order to pick out trends and 'hot spots'.
|
|
|
Pump Station Level Controller - Control up to six pumps or alarms with this new PSL Pump Station Level Controller for sewage lift stations and wet wells. It includes a non-contacting ultrasonic sensor and isolated 4-20mA output. An automatic pump run time logging/reporting system helps operators plan pump maintenance. Use the built-in keypad for calibration or the software program PSL Remote included with each PSL. Prepare and save calibrations and download to the PSL directly through the password-protected RS232 interface or dial-up PSL pump stations through regular phone lines and modems to calibrate and observe level and relay states in real time.
|
|
Radar Level Meter for distance, level and volume of liquids, pastes and solids
OPTIWAVE
works better than any radar ever before.
In contrast to earlier radar devices, the new OPTIWAVE with its more advanced design solutions is able to operate over a larger bandwidth. This ensures a sharper resolution and higher accuracy. The higher signal dynamics of OPTIWAVE allow the detection of even the smallest level changes.
|
|
* LST-500 Level transmitter :
A stainless steel version of its continuity output ESS, specifically for use in food industry applications. And is suitable for applications, requiring more precise level sensing than that provided by multipoint switches. And can be fitted externally 2NPT connection or externally an flange. The operating temperature range is -30to +125. The working pressure is 1.0 to 2.5 Mpa, testing rod length is 500mm. LCD disply, Providing a continuous output 0~5Vdc or 4~20mA.
* LST-1000 Level transmiter :
New developed a stainless-steel version sensor, its continuous output signal is (0~5Vdc or 4~20MA), the sensor combines the proven reliability of magnetic reed switching with resistors net worked to provide a variable output proportional to the float position (Liquid level). Testing rod length is 1000mm, standard flange mounting.
|
|
With LB440-RID, the problem of weld inspections is considerably reduced. You have full and accurate information on your process - continuously!
LB440-RID is already being successfully operated in many plants world-wide.
All continuous level measurements employing rod detectors or the SuperSens point detector can be equipped with the patented Radiation Interference Discrimination LB440-RID.
The system works only with Co-60 sources - the energy of the Cs-137 radiation (660 keV) is too close to the energy of sources commonly used in weld inspections to be reliably discriminated.
Existing Berthold Technologies equipment can be easily upgraded to include the RID technology.
|
|
|
|
|
|
FERITSCOPE FMP30 Ferrite content measurement in austenitic steel
The rugged FERITSCOPE FMP30 with plug-in type smart probe is suited for fast, non-destructive and accurate measurement of ferrite content on-site or in the lab according to the magnetic inductive method.
The measurement range is from 0.1 to 80 % Fe or from 0.1 to 110 FN. The measurement options are either measurable in Ferrit-percentage %Fe or in Ferrit numbers FN.
Applications are all measurements of the ferrite content in
austenitic steel welds e.g. of tubing etc.
normal construction steel with austenitic chrome alloy steel welded cladding e.g., in boilers, vessels, etc.
duplex steel.
This easy-to-use instrument has an USB interface for a PC and printer connection. It offers memory for up to 20.000 measurements with up to 100 applications. Further a detailed statistical and graphical evaluation is possible.
The calibration of the FERITSCOPE FMP30 is traceable to internationally approved IIW secondary calibration standards. The instrument therefore meets all requirements of ANSI/AWS A4.2 and DIN EN ISO 8249 as well as of the "Basler" standard.
|
|
|
|
|
|
Optical metrology equipment for climatologists and meteorologists
The laser ceilometer from JENOPTIK Laser, Optik, Systeme GmbH measures such atmospheric parameters as cloud height, visibility and the height of a planetary boundary layer. The product provides the first ever metrological device to safely detect also cloud layers and cirrus clouds at height levels up to 15 kilometers. This marks a major progress in the science of meteorological and climatologic forecasting. Measurement is accomplished with an opto-electronic laser sensor that relies on the LIDAR principle, an optical version of radar: A solid-state laser emits light pulses into the atmosphere. The light which is scattered by air and aerosol molecules is collected with a specific optical setup to be detected by a highly sensitive photo receiver (APD). By analyzing the pulse transit time and the intensity of backscattered light portions, smart algorithms compute a high-resolution aerosol height profile along with other related measurement readings. With integrated heating and cooling functionality and designed for autonomous operation, the CHM 15k can be relied to perform in any weather conditions.
|
|
EARTH RESISTIVITY METER PASI 16 GL
This new 16 bits instrument represents a large step forward in the field of electrical resistivity measurement at medium and great depth, for fresh water research and envinronmental monitoring.
Reliable and portable, the 16GL system is characterized by really first-rate performances at extremely low cost. The possibility to download data through the RS-232 port enables a quick interpretation with the VES 2000 interpretation software. It is recommended, as to exploit its capabilities, with the rechargeable accumulator P-100.
|
|
| ... products without technical information |
| |
Placed upstream of a cutting machine allows a single operator to measure and place a hose
without having to travel. Just set the display on the length and number of hoses to cut. Using
the push button, the operator will move the hose depending on the length programmed.
- Max Capacity : 100 mm.
- Max lenght measured at pass : 99999 mm.
- Maxi number of pieces : 99
- Entry guidance.
- Working height adjustable to 800 at 1000 mm.
- Voltage : 230 volts 1 Ph.
|
|
MEASURING: QUALITY CONTROL AND MANAGEMENT INFORMATION
You, like all our customers, demand ever higher production capacity, quality and accuracy. This is particularly important for standard size products which subsequently undergo further operations, such as welding, bending and/or punching, performed by robots or other automated systems
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we measure it !
Further Length stop and measure systems, like Length stop and measuring system manual, Length stop measuring system with hand wheel and Length stop and measuring system with electronic controls cover our product range.
|
|
Technical specifications
Tray diameter : 1500mm
The coil diameter varies according to the different models of hose crowns (from 220 to 700mm)
4 removable spindles to prevent crowns uncoiling
Enables the loading of hoses using a forklift truck or a hoist
|
|
|
|
|
|
The new MultiPaq21 data logger has up to eight channels allowing you to collect product and environmental temperatures from up to eight locations at once. Using flexible thermocouple cables, the temperature sensors can be positioned precisely within the product, on the surface, or in the air. They can record temperatures without the data logger or its mass influencing the response characteristics of the sensors and thus the accuracy of the readings.
The data logger is designed to withstand the most hostile of food processing applications and is even rated to IP67 with special waterproof thermocouple connections protecting against steam, water showers and routine cleaning procedures.
The logger will store up to eight profiles before needing to be downloaded. Data logger features:
- 6 or 8 channel logger (accuracy +/- 0.2C/ 0.4F).
- Simple start/stop options.
- Can record product & environmental temperature measurements simultaneously up to 400C / 750F.
- IP67 waterproof rating.
- Serial or USB compatible.
- Rechargeable NiMH battery which lasts for up to 250 hours between charges.
- Stores up to eight separate runs before you need to download the data.
- Interchangeable thermocouples to suit your product.
- Programmable sample interval.
|
|
|
|
|
|
HTA and HTA-Ex:
HTA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Hntzsch TA
sensors with thin-film sensor element can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m/h, l/min, C.
power supply HTA by 9 V battery or HTA- plug-in power supply
power supply HTA-Ex Li-recharchable battery, running time approx. 20 hours.
analog output 0 . 4 V = 0 . x m/s.
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
|
|
see the results for the following category : 
