|
|
The TH8080 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which use the network. The TH8080 is designed in accordance to the physical layer definition of the LIN Protocol Specification, Rev. 1.3 and 2.0 and SAE J2602.The IC furthermore can be used in ISO9141 systems.
Because of the very low current consumption of the TH8080 in recessive state it's suitable for ECU applications with hard standby current requirements, whereby no sleep/wake up control from the microprocessor is necessary.
|
|
|
|
|
|
General Description
The LVT16245 and LVTH16245 contain sixteen non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. Each byte has separate control inputs which can be shorted together for full 16-bit operation. The T/R# inputs determine the direction of data flow through the device. The OE# inputs disable both the A and B ports by placing them in a high impedance state.
The LVTH16245 data inputs include bushold, eliminating the need for external pull-up resistors to hold unused inputs.
These non-inverting transceivers are designed for low-voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVT16245 and LVTH16245 are fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaining low power dissipation.
Features
- Input and output interface capability to systems at 5V VCC
- Bushold data inputs eliminate the need for external pull-up resistors to hold unused inputs (74LVTH16245), also available without bushold feature (74LVT16245).
- Live insertion/extraction permitted
- Power Up/Down high impedance provides glitch-free bus loading
- Outputs source/sink -32 mA/+64 mA
- Functionally compatible with the 74 series 16245
-Latch-up performance exceeds 500 mA
- ESD performance:
*Human-body model >2000V
*Machine model >200V
*Charged-device >1000V
- Also packaged in plastic Fine-Pitch Ball Grid Array (FBGA)
|
|
|
|
|
|
General description :
The Intersil ISL324xE devices are 2.7V to 3.6V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and Human Body Model) on transmitter outputs and receiver inputs (RS-232 pins). Targeted applications are POS systems, and notebook and laptop computers where the low operational, and even lower standby, power consumption is critical. Efficient on-chip charge pumps, coupled with manual and automatic power-down functions, reduce the standby supply current to a 0.5µA trickle. Tiny 5mmx5mm Quad Flat No-Lead (QFN) packaging and the use of small, low value capacitors ensure board space savings as well. Data rates greater than 250kbps are guaranteed at worst case load conditions.
ISL324xE are 3 driver, 5 receiver devices that, coupled with the 5x5 QFN package, provide the industry's smallest, lowest power complete serial port. The 5x5 QFN requires 60% less board area than a 28 Ld TSSOP, and is nearly 20% thinner. These devices also include a noninverting always-active receiver for "wake-up" capability.
The ISL3243E features an automatic powerdown function that powers down the on-chip power supply and driver circuits. This occurs when an attached peripheral device is shut off or the RS-232 cable is removed, conserving system power automatically without changes to the hardware or operating system. It powers up again when a valid RS-232 voltage is applied to any receiver input.
|
|
|
We invented the charge-pumped RS-232 transceiver. Today, we are the leader in copper-wire data transfer, at speeds up to 800Mbps. Our product line includes USB, RS-232, RS-485, LVDS, and IrDA transceivers as well as Logic Level Translators, UARTs, and SCSI termination products.
|
|
|
LVDS & CML (Buffers and SerDes) Nationals leading edge LVDS and CML multi-megabit & -gigabit products include signal conditioners, serializers/deserializers (SerDes), drivers/receivers/transceivers, crosspoint switches, muxes, 1:n repeaters, buffers, and much more that drive LVDS, M-LVDS, PCI Express, SATA, SAS, XAUI, 4G FC, DVI/HDMI, and CPRI signals over low-cost cables and long FR4 traces. Serial Digital Interface and Data Transmission.
|
|
|
|
|
|
AMIS-30600: LIN Transceiver
The single-wire transceiver AMIS-30600 is a monolithic IC that works as an interface between the protocol controller and the physical bus.
AMIS-30660: CAN High-Speed Transceiver
This transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems.
AMIS-30663: CAN High-Speed Transceiver with true 3.3V and 5.0V logic level interface
This transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems.
AMIS-40615: LIN Transceiver
The AMIS-40615 is a full-featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus.
AMIS-40616: LIN Transceiver
The AMIS-40616 is a full-featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus.
AMIS-4168x: Fault Tolerant CAN Transceiver
The AMIS-41682 and AMIS-41683 work as the interface between the CAN protocol controller and the physical wires of the CAN bus.
AMIS-42665: High-Speed Low Power CAN Transceiver
The AMIS-42665 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems.
AMIS-42700: Dual High-Speed CAN Transceiver
Controller area network (CAN) is a serial communication protocol, which supports distributed real-time control and multiplexing with a high safety level.
|
|
|
The CS8406 is a digital audio transmitter that supports 192 kHz needed for next-generation audio formats such as DVD-Audio. It enables consumer and professional audio products to exchange 192 kHz S/PDIF and AES/EBU audio data. The CS8406 accepts and encodes audio and digital data, which is then multiplexed, encoded and driven onto a cable/optical transmission interface. Its flexible 3-wire serial digital audio input port, on-chip channel status and user bit buffer memories allow block-sized updates without the need for external memory. The CS8406 also includes an on-chip, low-skew, low-impedance differential-line driver that permits transmission over longer cable lengths.
|
|
|
Industry standard single and dual drivers and receivers for RS232 and RS562 are available for power supplies from 1.8V to 5.5V with high ESD protection. DTE or DCE configurations are available in 3.3V or 5V versions.
|
|
|
Texas Instruments (TI) provides complete digital interface solutions. High-performance solutions that empower you to differentiate your products and accelerate their time-to-market. TI has experience in highspeed, mixed-signal circuits, system-on-a-chip integration and advanced product development processes. Our solutions ensure you receive the silicon, support tools, software and technical documents to create and deliver the best products on-time and at competitive prices.
|
|
| ... products without technical information |
| |
|
Complementing PerkinElmer Optoelectronics long history of linear cameras are todays newest and most advanced models: the LC3000 analog, the LD3500 CameraLink and LVDS cameras, and the YD5000 color cameras. Available in a variety of pixel sizes, resolutions, speeds, and outputs, PerkinElmer''s full line of linear cameras find their homes in leading edge applications such as currency inspection, print inspection, postal sorting, small parts sorting, motion picture digitization, glass inspection, and web inspection.
|
|
The SmartBlue™ digital cameras are designed for high line rate applications with low to moderate light conditions and where small size, and low cost are required.
The New SmartBlue™ digital linescan cameras incorporate the latest in photodiode array technology based on the industry standard Reticon® devices with state of the art electronics and a robust industrial camera housing. The linescan photodiode array is a Pinned Photodiode Charge Couple Device which allows for high sensitivity, fast readout, while maintaining high dynamic range, and low image lag.
The New SmartBlue™ cameras are cost effective high performance digital linescan cameras, and feature a CameraLink™ digital interface. These cameras feature geometrically precise photodiode CCD image sensor with 14 um square pixels with a resolution of 2048 pixels. This "next generation" array can achieve data rates up to 80 MHz with superior noise immunity, precise linearity, and high CTE.
|
|
|
The Piranha3 camera family takes imaging to a new level with eight outputs running at 40 MHz and either 8k or 12k resolutions. The camera's 12k resolution surpasses the resolution of any other line scan camera, delivering more detail with fewer cameras in a multi-camera system for measurable cost savings. Additional system cost-savings stem from the Piranha3's superior sensor alignment accuracy, high responsivity and optimized pixel pitch, 5 µm (12k) and 7 µm (8k).
|
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is one example of customization and application-specific solution
a compact, high sensitivity linescan camera used in sorting applications.
|
|
|
The new mvBlueLYNX design with its fast PowerPC processor covers video sensor and intelligent camera applications. Easy development and smooth integration in your network offer a significant reduction of time-to-market for image processing solutions. The compact, integrated design forms the base for reliable usage in harsh environments.
|
|
|
|
|
|
|
Thanks to its 400 MHz (3,200 MIPS) DSP, the VCLine scan Smart Camera from Vision Components is one of the fastest intelligent cameras on the market. The device supports three integration modes: the free-running mode enables a scan rate of 11 kHz. With a constant integration time, the camera can be triggered externally at a maximum scan rate of 5,5 kHz. A third mode allows for a variable integration time which is determined by external triggering, reaching a maximum scan rate of 11 kHz. The Smart Camera comes equipped with 32 MB DRAM and 4 MB Flash EPROM for program and data storage. It features both an Ethernet and a RS232 interface as well as four digital PLC inputs and four outputs, an image trigger input and a flash trigger output. Due to its small dimensions (90 x 50 x 35 mm), the VCLine can be easily integrated into machines and plants. Like all other Smart Cameras from Vision Components, it is especially suited for use in rugged industrial environments – due to its compact and robust housing, it withstands vibrations and shocks.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
