|
|
| ... products without technical information |
| |
Order Code Z-SG
Input: analog transducer (strain gauge load cell); digital (weighting)
Output: current, 0..20 / 4..20 mA; voltage, 0..5 / 0..10 V
Precision: 0.01%
DIN guide back side bus connection and RS232
(ModBUS) front communication jack
ModBUS RTU slave protocol, half duplex
Professional converter for manufacturer of load cells, mounting guide Din 46277, isolated to 1500 V (input-output-power supply). The transducer acquire signals from load cells (6-wire) and transmits the value with analogue standard (mA / V) and serial (ModBUS Rtu) output. It accepts up to N. 4 load cells (350 ohms) and also has a contact that can be configured as alarm or weighing stable (weighing in motion).
Extremely fast (sampling frequency set by 12.53 Hz at 151.71 Hz), it measures with sensibility from 1 to 128mV / V, and also has remote reset tare via serial or digital input.
Ideal to be used for weight complex measures, result of the action of multiple cells in parallel or with moving loads.
|
|
| ... products without technical information |
| |
Preamplifiers for EMI / EMC testing from 100 Hz - 40 GHz
Broadband, high gain with minimum gain variation for accurate EMC measurements.
Com-Power broadband high gain preamplifiers were designed for electromagnetic interference (EMI) testing and certification. EMC test labs use preamplifiers to improve sensitivity of the professional test system during EMI radiated emissions measurements. Without a high gain preamplifier, signals picked by the professional antenna that have amplitudes below the noise floor of the test system cannot be measured. The preamplifier gain has minimum variations for the entire operating frequency range for accurate emissions measurements. The Com-Power preamplifiers were primarily intended for EMC applications. However, it can be used for other applications that require signal amplification. |
|
Pressure range up to 1250 bar / 18,000 psi
Suitable for Air, Nitrogen, Argon, Industrial helium and a wide range of other gases
Provided with Resato air-driven single acting, double acting or two-stage gas booster
Water-cooled Oxygen boosters available
All stainless steel construction |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Digital Fiber Professional amplifier with Two Independent Outputs.
High speed 60 micro second response.
APC Function (Auto Power Control):
The APC function ensures precise sensing even when there are changes in the temperature or environmental conditions. |
|
HBM supplies a wide range of digital and analog professional amplifiers, transducers and software for monitoring and optimizing production and assembly processes.
In the light of ISO9000 and legislation on the subject of liability and warranty, quality assurance is taking on an ever greater significance in present day manufacturing processes.
We supply a wide range of process monitoring and signal conditioning instrumentation for quality assurance or statistical process governor in:
Monitoring of component assembly, e.g. engine and transmission assembly
Monitoring and control of machines and centre tools
Monitoring of metal forming, e.g. stamping processes
Monitoring of raw materials forming, e.g. injection moulding, tablet pressing
Functional testing, e.g. force displacement testing.
|
|
TOPAX NT is a wall-mounted controller and measuring professional amplifier which has been developed on the basis of the latest microprocessor technology. It can be used for the most different tasks in swimming pool applications, professional water treatment and process engineering. With its versatile possibilities a solution is offered which stands out for its user-friendliness, interfaces and modularity.
Besides the classic water parameters such as free chlorine, pH value, temperature or REDOX potential it is also possible to measure and further process combined chlorine with the TOPAX NT. Furthermore the combined chlorine content is displayed.
Due to a graphics display the menu-driven operation uses plain text available in different languages. Trend values can be shown as curves on the display. With the help of this curves the user can set the parameters directly.
As an option the TOPAX NT can also carry out the functions of a gas warning device. The chlorine gas transducer can be connected directly.
Digital inputs at the TOPAX NT allow the user to monitor the metering performance of the pumps connected or to control professional filter flushing continuously, for example.
|
|
Here is the universal DAQ instrument that provides the extra added value for your demanding projects in testing and measurement: QuantumX by HBM. Suppliers of data acquisition at the highest level: small, fast, universal. Upgraded and exponentially enhanced to the power of "X" to give you fascinating, new opportunities: XXL flexibility. XXL efficiency. XXL reliability. Demand more for your measurement tasks. Demand QuantumX!
What do you want to measure today? Benefit from the universal connections QuantumX provides for almost all transducer technologies. QuantumX propels your test and measurement projects into the fast lane regardless of the combination of principles of measurement - just connect your transducers and start measuring... with 24-bit resolution!
QuantumX requires only minimal space for bundling technically superior functions. At only 174 x 44 x 119 mm (6.9 x 1.7 x 4.7 inch), QuantumX fits perfectly into every test table - even where space is a constraint. The compact design considerably expands the range of applications you can cover - be it centralized or distributed data acquisition. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
These groups are used for the setting or the maintenance under pressure of installations of water of workshops of production or the units of cleaning, but also, for the drinkable water supply and the equipment of installations of protection fire.
Of modular concept, they are assembled and regulated machines some in accordance with the requirements of the installations and are delivered completely equipped, ready to be connected on site.
They are declined in group of 1,2,3 or 4 pumps, mono or multicellular according to the required hydraulic performances.
Teams, in option, of the system speed integrated TECHNOVAR, they offer a great flexibility in use.
Maximum performances:
- Flow: 300 m3/h
- Pressure: 40 bar
- Temperature: 70°C |
|
| ... products without technical information |
| |
| Engineered Dry Screw vacuum systems incorporate Kinney Dry Screw industrial vacuum pumps into complete vacuum systems with vacuum boosters, custom controls and accessories to combine high pumping speed with deep vacuum levels. Flows range to 10000 CFM (17000 m³/h) with vacuum levels to 10 microns and below. |
|
| Our Liquid Ring Vacuum Systems are ideal for pumping wet gas mixtures at low pressures. A wide variety of configurations are available, incorporating Kinney or atlantic fluidics liquid ring supplier of vacuum pumps. Performance ranges to 560 CFM (950 m³/h) in standard systems, or to 10000 CFM (17000 m³/h) in Engineered Solution Vacuum Systems. |
|
| Booster/Piston vacuum systems combine a rugged, oil-sealed Kinney suppliers of vacuum pump with a vacuum booster to supercharge the pump, allowing for deeper vacuum or greater throughput. Performance ranges to 2000 CFM (3400 m³/h) in standard systems, or to 10000 CFM (17000 m³/h) in Engineered Solution Vacuum Systems |
|
| Sacher Lasertechnik offers state of the art tunable diode laser manufacturers systems for industry and science. The combination of high power and performance really makes a difference. They are designed for spectroscopy laboratories as well as for industrial applications. |
|
|
