|
|
The DP/DP coupler interlinks two PROFIBUS DP networks and permits data transmission between the masters and the two DP networks. The maximum size of the transmitted data is 244 bytes of input data and 244 bytes of output data. The DP/DP coupler is configured in the S7 software or by means of a GSD file.
Features:
° Up to 244 bytes of input data and 244 bytes of output data can be exchanged between two PROFIBUS networks
° Dual-redundant power supply
° Electrical isolation between the PROFIBUS networks
° PROFIBUS addresses can be set by DIL switch or software |
|
The Serial RapidIO PCI Bridge provides the capability to bridge between Serial RapidIO and PCI. It is part of a family of bridge devices aimed at applications wishing to take advantage of the Serial RapidIO interconnect.
Serial RapidIO is a switched data communication standard developed for the interconnection of devices on the same circuit board or between circuit boards across a backplane at rates in excess of 10Gbps. It has been developed as a more cost-effective, standards based replacement for expensive proprietary busses in high-performance embedded systems, such as networking and communications equipment and enterprise storage.
|
|
| Pericom has designed these high-performance devices for next generation markets that include Switches and Routers, Servers, HBAs, Data Storage Systems, PCs, Notebooks, Telecom Equipment, Multi-Function Printers, Test Equipment, Embedded Systems, and Data Acquisition Systems. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Isolated direct drive with automatic spindle cooling ensures optimum
thermal conditions at high loads
High-performance GPlus 450 control is user-friendly and network-ready
bridge design for high rigidity and maximum accuracy during high-speed machining
rapid feed speeds up to 1420 inch/min
high-power drives, spindle speeds up to 15,000 rpm
extra-large linear guides on all 3 axes
quick acceleration (up to 1 g) for shortest machining times
linear measuring system on all axes |
|
» 3-AXIS MILLING MACHINES
Slotted table, moving gantry, intensive application
» Accurate 3D milling equipment optimized for the machining of the following materials :
. Aluminium of strong thickness
. Brass and alloy
. Synthetic resins
. Plastics and composites with high mechanical specifications
. Wood and by-products
. Soft stones and marble
» Technology :
. Transmission by ballscrews of high cutting area on all axes (diameters 40 and 63 mm on all axes with double ballscrew on X longitudinal axis)
. Numerous Numerical Controls available : SIEMENS SINUMERIK 840Di - FANUC 16i - NUM1050 - MECANUMERIC CN7000
. A wide range of electro-spindles from 6 to 18 KW and rotation speed till 40000 rpm
. Vacuum plate with turbines or vacuum pumps
» Accurate, fast and rigid equipment |
|
The Milltronics BR series machines are manufactured in the US and are very unique machines. They were designed for fabrication, pattern, and job shops that machine large light parts or patterns.
MACHINE FEATURES
- Economical Combination of Travels and Performance
- Ideal for Light & Moderate Milling of Metals
- 45 mm Linear Ball Way
Construction from
- Five Bearing (60 mm dia.) 8000 RPM Spindle with Air Purge & Labyrinth Seal
- Steel Way Covers
- Digital AC Servo Motors from Yaskawa
- HUGE Travels and Table Surfaces Designed to Fit Between the Lightweight Routers and Heavyweight Cast Bridge
Machines
- Large Diameter High Speed Precision Ground Ball Screws
- 24 HP High Torque Closed Loop Vector Spindle Drive
MACHINE OPTIONS
- 24 Pocket Carousel ATC
- Flood Coolant System
- High Speed Spindles 15K, 20K, or 24K
- Two Speed 24 or 35 HP Closed Loop Spindle Drive
- Digitizing
- 4th Axis
- Riser Blocks
- Auto Lubrication
CONTROL FEATURES
- High Speed 1200 Blocks/sec Centurion 7 CNC with Dual 32 Bit Processors
- Conversational and ISO Programming
- High Resolution Large Color LCD Display
- Feed Forward and Look-Ahead Option for Smooth and Accurate Machining
- Networking & Flash Memory Reader Options
- 12 Mb Motionless Disk Parts Storage Memory
- 8 Mb Extended Program Execution Memory with Large Program Editing/Execution
Capabilities
- Concurrent Programming |
|
MV-50i
X / Y / Z axex travel 1270/635/500mm
Table size (LXW) 1420X610 mm
Spindle speeds 8,000 rpm
Spindle Motor(HP) 20 HP
|
|
1.The new KMC-G series, a high rigidity fixed table gantry design, is capable of cutting very long and large components and has the stabilized machining accuracy.
2.Floor space saving up to 25%.
3.Stationary table has the maximum load of 10000 kgf/m2 (2044 lb/ft 2 ).
4.The X, Y-axes utilize a superior step design whereby the lower slideway is offset forward from the upper slideway. This greatly enhances the static rigidity.
5.Unique design of 2-speed gear spindle head features that the spindle and motor are symmetrically put on the center line.
6.KMC-G series have Preloaded Rack and Pinion Drives on X and Y-axis; 30 m/min rapid feedrate can be achieved under heavy load carrying.
7.Roller packs for the movement of carriages are used on 3-axis inserted boxways.
8.2-position AAC(Automatic Attachment Changer) is designed for improving productivity.
9.Automatic 30 degree angle head, extension head, index universal head and 5-axis head are optional accessories for wide application of multi-face and 5-axis machining
|
|
This state-of-the-art CNC milling machine features
easy to use Siemens 802C CNC control and powerful axis servo-drives.
Linear guides on a solid cast-iron frame ensure optimum axis acceleration and high stability.
servo-drives on all 3 axes
pneumatic tool clamping
fully enclosed workspace |
|
PF 6500
Highly developed, robust and reliable ...
The design of the PF is based on the proven concept of the AP-series.
The bridge-type layout gives a far greater range of applications.
Each detail shows the experience and know-how of our highly qualified technicians.
... and flexible.
The range of applications reaches from machining of compact workpieces to 3-side-machining of workpieces with a length of 6,5 m. We can also construct special lengths for you and equip your machine with clamping devices, which are perfectly adapted to your applications.
Our strongest argument:
High-grade-steel machining. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The DP/DP coupler interlinks two PROFIBUS DP networks and permits data transmission between the masters and the two DP networks. The maximum size of the transmitted data is 244 bytes of input data and 244 bytes of output data. The DP/DP coupler is configured in the S7 software or by means of a GSD file.
Features:
° Up to 244 bytes of input data and 244 bytes of output data can be exchanged between two PROFIBUS networks
° Dual-redundant power supply
° Electrical isolation between the PROFIBUS networks
° PROFIBUS addresses can be set by DIL switch or software |
|
The CAN-Bus Tester 2 constitutes a universal measuring instrument for the commissioning, analysis, monitoring, troubleshooting and service/maintenance of CAN-Bus plants.
Typical problems which occur during the operation of CAN-Bus plants, such as node failures, faults in the communication or complete standstill of the plant, often have their origins in the physical bus characteristics. The CAN-Bus Tester 2 provides an overview of the signal conditions on the bus, which helps you locate and rectify frequently occurring error causes without unnecessary delay.
You can already ensure a correct bus cabling and verify its transmission properties when setting up the plant. You can also perform comparing measurements directly on the running plant over its lifetime and thus prevent downtimes. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
