|
|
M500 d.c. Standard, OEM Panel Mounted Category, Verderflex Peristaltic Pump.
By combining a low voltage d.c motor with the robust M500 pump a versatile unit with speed/flow rate variation options is achieved.
The pump is supplied as standard with Polycarbonate mouldings and a two roller rotor. Options of Noryl mouldings and a three roller rotor are available.
Flow rates up to 675 ml/min.
Tube: Verderprene, Silicone, Viton and Tygon
Motor: 12/24v d.c. Permanent Magnet
Gearbox: Spur
|
|
A new generation of smaller hose pumps, based on an innovative, close-coupled design. The features of this pump has exceptional dosing features.
Verderflex’s contribution to your productivity with its new generation pumps, simply serves to highlight our commitment to solutions in pumping technology.
The rotor is mounted on a drive shaft, which is located on a dual bearing hub.
Quieter operation because of ‘greased for life’ bearing
Design of the drive shaft dramatically reduces the loading on gearbox and motor.
Features:
Ultra-compact construction, reduces required floor space by up to 70%.
Easy to install, virtually maintenance free and comply with ATEX standards.
Only wearing parts are the hose and lubricant.
Improved hose life through reduction in operating temperature
Improved frame design.
One-size-fits-all slotted flange solution, incorporating ANSI; JIS & DIN.
Executed with a taper-lock flange, which is suitable for pressures of up to 12 bar.
|
|
|
|
|
|
The Dura series form a new generation of smaller hose pumps; the Dura10, Dura15 and Dura25, based on an innovative long coupled design with close coupled advantages. The features of this pump surpass all other hose pumps giving Verder the world’s most reliable, robust pump with exceptional dosing features.
Specific features Verderflex Dura
The rotor is mounted on a drive shaft, which is located on a dual bearing hub. The bearing construction is ‘sealed for life’ and centrally absorbs the forces released in the pump. This results in quieter operation and a more durable pump and drive. The unique drive shaft has been designed to dramatically reduce the loading on the gearbox and motor.
The Dura series has an ultra-compact construction, which dramatically reduces required floor space by up to 70% in contrast to other comparable pumps.
The Dura range of pumps are easy to install, virtually maintenance free and special versions comply with ATEX standards.
A significant reduction in operating temperature leads to improved hose life when compared to an equivalent pump type.
Other features specific to this pump include the improved frame design and a one-size-fits-all slotted flange solution, incorporating ANSI; JIS & DIN 150 to connect the Verderflex Dura pump to the pumping station. The entire range incorporates a rapid change taper-lock flange, which is suitable for pressures of up to 12 Bar / 175 PSI*.
|
|
10 stainless steel rollers with 5 rollers always in contact with the tubing, minimize pulsation at pressures up to 70 psi. 1-, 2-, 4-, 8-channel interchangeable heads.Unique cam-actuated tubing compression adjustment
Pumps Complete
Single-, two-, four- or eight-channel versions. Complete pump is shipped with head of choice and sample tubing in several diameters
|
|
TYPICAL APPLICATIONS
PPS
For narrow web applications and presses using light to heavy viscosity inks (including UV), coatings and adhesives requiring flow rates of 1.5 GPM or less. Available with optional removable head for quick changeover
MOTOR OPTIONS
Electric, electronic variable speed control.
Variable speed air motor (inherently explosion proof).
MOTOR VOLTAGE OPTIONS
VA, VB, GAM*(*28 CRM @ 80 psig 792.9 Lmin @5.4 bat)
TANK OPTIONS
1, 2, 5 gallon pails (accessory pump stand required).
10, 20, 30 gallon tanks.
|
|
Albin ALH hose pumps - Handle the toughest applications
Best hoses on the market, multiple reinforced and precision manufactured layers.
From aggressive to shear-sensitive and viscous materials, the Albin Peristaltic Hose pumps can handle the toughest applications in the handling of raw materials and soap & detergents manufacturing processes.
Albin Hose pumps offer tremendous fluid transfer versatility, ranging from waste stream removal to offering an alternative solution to seal-less gear pumps when handling highly shear-sensitive products. The pumps also offer excellent lift capabilities, high discharge pressures and smooth tubing transfer of material.
|
|
Ideal for dosing and filling applications from 0.001 to 3700 ml/min
– powerful, programmable, IP65-rated dispensing pump
– dust-tight and waterproof against water jets from all directions
– no internal corrosion thanks to sealed stainless steel housing
– process suitable with batch programming capabilities
– memory saves up to 4 sets of operating parameters
– flow rate and volume can be calibrated
– bayonet coupling system for 20 interchangeable pump-heads
– pump-heads with 1 to max. 24 channels
– takes also ceramic piston pump-heads
Remote control
– RS232 "in" and "out"
– analog interface
– Software ProgEdit, Plugin for Labview (free download)
|
|
The neMESYS OEM tubing pump combines the approved peristaltic pump technology with the modular and extensible neMESYS drive and bus system from cetoni.
Because the only part of the pump in contact with the fluid being pumped is the interior of the tube, it is easy to sterilize and clean the inner surfaces of the pump. The use of a tube makes it a relatively low-cost maintenance item compared to other pump types. The neMESYS tubing pump also minimizes shear forces experienced by the fluid, which may help to keep colloids and slurry fluids from separating.
|
|
|
|
|
|
PUMP CONSTRUCTION
General Features
Positive displacement peristaltic hose type to handle a wide variety of chemicals and liquids; pump with movement by ROLLERS ON BEARINGS. Rollers position 120° N 3.
Features:
• Efficient roller technology
• Standard leak detector
• Compact foot print
• Capable of operating in either direction without flow variation
• Capable of running dry without damage to pump or hose
• Capable of pulling 98% of full vacuum
• Valveless, sealless and glandless
• Capable to transfer mixed phases without damages
• Capable to transfer sensitive products and pollutant products
Material of Construction:
• Stator: Cast iron
• Rotor: Cast iron
• Rollers: cast iron
• Mounting frame: Painted steel
Side Cover: Polystyrene
Available Hose Material:
• Natural rubber
• Nitrile rubber
• Hypalon rubber
• Epdm rubber
Hose Size (ID) 76 mm
Connections:
• 304 SS
• 316 SS
• PVC
• PP
• TITANIUM
Connections size:
• 3” ANSI or ISO PN 16
Leak Detector Switch Rating:
• 100VA Max, 230 V. , 2,5 amps
Operating Speed : Up to 48 rpm
Max Discharge pressure:
• 8-10 bar continous
• 12-15 bar intermittent
Max Suction lift mt 8,5
|
|
* Aluminum pump housing: 17 1/16" x 16 3/16" x 10"
* Available in fixed speed, air drive, and Variflow assemblies
* Positive displacement pump with a flow rate of up to 21 GPM (79.5 LPM)
* Applications: Ink Pump, Water Treatment, Solvent, Slurry,Pulp and Paper, and Industrial
|
|
|
Flex-I-Liner pumps are sealless and self-priming. They can pump in either direction and can run dry. Flex-I-Liner pumps can be furnished with electric motors, with rotary vane air motors or with variable speed drives for metering purposes.
|
|
Flowmaster
ideal for heavy-duty processes, the most convincing solution for dispensing and filling applications in a dusty, humid or corrosive environment and in clean room areas
– easy tube exchange
– convex rollers treat the liquid gently
– protection rating IP65
– easy disassembly of the pump head
|
|
|
The Micro-Peristaltic Pump is a very small peristaltic pump where the motor reduction gear and pumping mechanism are contained in a single case. The simple but clever pumping mechanism provides a gentle pumping action, giving long tube life and minimizing damage to organic materials contained in the fluid. No return valve is necessary under appropriate conditions, and even solids of small size can be pumped. Very little noise is produced. The tubing is easily replaced and discharge rates of between 0.06-10ml/min are possible depending on the model. This pump is intended for fuel cells analysis and medical and bio-applications etc. Complete solutions and working systems incorporating this pump are also provided.
|
|
Ideal pumps for analytical applications
Lowest pulsation (planetary drive) highest accuracy
Very high repeatability on all channels
4, 12, 16, 24 Channels, 0.0004 to 44 ml/min
IP and IP-N
without dispensing functions
microprozessor controlled, analog interface
IPC and IPC-N
with various dispensing functions
RS-232 and analog interface
|
|
Technical project support and firmware adaptation, our engineers welcome your ideas and are pleased to help realize your projects.
IDEX Health & Science: complete fluidic solutions, please visit our home page www.idex-hs.com
|
|
|
Aurora’s revolutionary OEM peristaltic pump is ideal for fluid transfer applications where size, power efficiency, and precision are important. These small, high-precision OEM peristaltic pumps were originally developed to meet the needs of Aurora’s Atomic Absorption Spectrometer, Vapor/Hydride Generator and Atomic Fluorescence Spectrometer but since then have found their way into a range of industrial, analytical and life science applications.
|
|
The DESELCO Pump production run offers a great range of
hose pumps for industrial use, laboratory and sampling. So
there will be many application options for industry and dosing.
The production run consists of 2 models of peristaltic pumps,
the DL models (stainless steel/IP65) and the DI models (IP65).
|
|
Ecoline
Economical and powerful stackable pumps for dispensing and filling applications with variable flow rates, robust stainless steel housing (stackable), various pump heads for flow rates up to 5400 ml/min, analog interface
Ecofluidic
without interface, cost effective tubing pump with variable speed for simple fluid transfer up to 3,8 Liter/min, innovative design for versatile applications
|
|
|
|
|
|
PUMP CONSTRUCTION
General Features
Positive displacement peristaltic hose type to handle a wide variety of chemicals and liquids; pump with movement by ROLLERS ON BEARINGS. Rollers position 180° N 2.
Features:
• Efficient roller technology
• Standard leak detector
• Compact foot print
• Capable of operating in either direction without flow variation
• Capable of running dry without damage to pump or hose
• Capable of pulling 98% of full vacuum
• Valveless, sealless and glandless
• Capable to transfer mixed phases without damages
• Capable to transfer sensitive products and pollutant products
Material of Construction:
• Stator: Aluminium (MS1-MS2) Cast iron (MS3)
• Rotor: Cast iron
• Rollers: Cast iron
• Mounting frame: Painted carbon steel
Side Cover: Acrylic
Available Hose Material:
• Natural rubber
• Nitrile rubber
• Hypalon rubber
• Epdm rubber
Hose Size (ID) 40-55-68mm
Connections:
• 304 SS
• 316 SS
• PVC
• PP
• TITANIUM
Connections size:
• 1”1/2 – 2” – 2”1/2 ANSI-ISO Flange
Leak Detector Switch Rating:
• 100VA Max, 230 V. , 2,5 amps
Operating Speed : Up to 100 rpm
Max Discharge pressure:
• 8-10 bar continous
• 12-15 bar intermittent
Max Suction lift mt 8,5
|
|
Pumped Liquid
Low to highly viscous liquids, pasty, neutral or aggressive, pure or abrasive, gaseous or tending to froth, also with fibrous and solids content
Main Fields Of Application
Sewage and environmental engineering, chemical and petrochemical industries, food and beverages industry, paper and pulp industry, soap and fats industry, dye and paint industry, plastic and ceramics industry, marine and offshore engineering, agriculture
|
|
|
|
|
|
PP1H & PP2H Peristaltic Pump Chemical Feed Prepackaged Systems
SINGLE OR DUAL-PUMP MODELS FEATURE FLOMOTION INDUSTRIAL HOSE PUMPS
SELF PRIMING WITH BUILT IN SPILL AND LEAK PREVENTION
The PP1H and PP2H (dual pump model) an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers. Flow rates from .017 to 48 gallons per hour.
2001H Peristaltic Pump
VARIABLE SPEED LOW PROFILE INDUSTRIAL HOSE PUMP
WITH REMOTE MOUNTED CONTROLLER and HORIZONTAL MOTOR
Exceptional self-priming capabilities make the 2001H Series an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers. Flow rates from .017 to 49 gallons per hour.
2001HE/ HEC Peristaltic Pumps with integral motor drive controller
COMPACT VARIABLE SPEED INDUSTRIAL HOSE PUMP
Comapct design and excellent self-priming capabilities make the 2001HEC an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers. Flow rates from .017 to 49 gallons per hour.
2001HSP Self Priming Analyzer Sample Pump
FIXED SPEED INDUSTRIAL SAMPLE PUMP
Exceptional self-priming capabilities make the 2001HSP an ideal choice for continuous sampling. Flow rates from 6.8 to 980 ml/min depending on gear ratio and tubing size.
2001V/VE Peristaltic Pump Systems
INDUSTRIAL HOSE PUMP WITH TWO REMOTE MOUNTED CONTROLLER OPTIONS
Exceptional self-priming capabilities make the 2001V Series an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers. Flow rates from .004 to 98 gallons per hour (with dual pump-head option.)
|
|
* Aluminum pump housing; 2 1/4" x 2 1/4" x 2 5/8"
* Available in fixed speed, air drive, and Variflow DC speed models
* Positive displacement pump with a flow rate of up to .12 GPM
(.45 LPM)
* Applications: Laboratory and Water Treatment
|
|
* Polycarbonate pump housing; 3 1/8" x 3 1/8" x 1 3/8"
* Designed to be directly mounted to motor
* Available in fixed speed, and Variflow DC assemblies
* Applications: Ink pump, Laboratory, Fluid Transfer, and O.E.M
|
|
|
The Abaque pump operates on the peristaltic principle which was patented in 1925 by Mr. Horthaus of France. It is classified as positive displacement pump meaning that a fixed and known amount of fluid is discharged per revolution of the pump with flow independent of discharge head. The pump operates by compressing a specially designed elastomeric hose between a set of two or more shoes attached to a rotor and the internal wall of the pump case or housing. Fluid in the hose is forced from the inlet side of the pump toward the discharge by the squeezing or compressing motion of the shoes on the rotor of the pump as it rotates. This peristaltic action is in some ways similar in nature to that of the human digestive tract.
|
|
Hose Pumps manufactured by ProMinent are characterised by their simple functional principle and their compact, robust design. They are self-priming, without gaskets and valves.
The hose pumps of the DULCO®flex series for low, medium and high outputs with a large output range of 17 to 25,000 l/h and a large number of different hose materials are suitable for almost all metering and delivery tasks in industry and laboratories. While the pumps for low pressures up to 8 bar are equipped with roller technology, pressing shoes are used for higher pressures up to 15 bar.
Because of their design, the hose is the only wearing part which, however, can be quickly and easily replaced.
|
|
* Polycarbonate pump housing; 4 3/8" x 4 1/2" x 3 5/16"
* Available as mechanical speed control, air drive, and Variflow DC assemblies.
* Positive displacement pump with a flow curve of up to .75 GPM or (2.8 LPM)
* Applications: Ink pump, transfer, waste water,chemical transfer, and metering
|
|
* Aluminum pump housing: 10" x 9 3/16" x 8 7/16"
* Available in fixed speed, mechanical speed control, air drive,Variflow DC and explosion proof assemblies
* Positive displacement pump with flow rate of up to 9.5 GPM(35.6 LPM)
* Applications: Ink Pump, Water Treatment, Pharmaceutical, Food,Solvent, Slurry, Pulp and Paper, and Industrial
|
|
* Available in three distinct pump head styles:
o 610: Al. Pump Housing, 5 13/16" x 6 5/8" x 4 15/16"
o 615: 316 S.S. pump housing, 5 13/16" x 6 5/8" x 4 15/16"
o 620: Al. pump housing with hinged side plate,6 3/8" x 5 1/8" x 6"
* Available in fixed speed, mechanical speed control, air drive, Variflow DC, and explosion proof assemblies.
* Positive displacement pump with flow rates of 3.4 GPM to (12.9 LPM)
* Applications: Ink Pump, Water Treatment, Pharmaceutical, Laboratory, Food, Solvent, Slurry, Pulp and Paper, and Industrial
|
|
|
|
|
|
PUMP CONSTRUCTION
General Features
Positive displacement peristaltic hose type to handle a wide variety of chemicals and liquids; pump with movement by ROLLERS ON BEARINGS. Rollers position 180° N 2.
Features:
• Efficient roller technology
• Compact foot print
• Capable of operating in either direction without flow variation
• Capable of running dry without damage to pump or hose
• Capable of pulling 98% of full vacuum
• Valveless, sealless and glandless
• Capable to transfer mixed phases without damages
• Capable to transfer sensitive products and pollutant products
Material of Construction:
• Stator: Aluminium
• Rotor: Carbon steel
• Rollers: 304 SS
• Mounting frame: 304 SS
Side Cover: Acrylic
Available Hose Material:
• Natural rubber
• Nitrile rubber
• Hypalon rubber
• Epdm rubber
• Pharmed
Hose Size (ID) 5-10-16-26 mm
Connections-Inserts
Connections-Inserts:
• 316 SS
• PVC
• PP
• TITANIUM
Connections size:
• 3/8” – 3/4” – 1”1/4 bsp
Leak Detector Switch Rating:
• 100VA Max, 230 V. , 2,5 amps
Operating Speed : Up to 140 rpm
Max Discharge pressure:
• 8-10 bar continous
Max Suction lift mt 8,5
|
|
Peristaltic pumps up to 170 ml/min
Our peristaltic pumps are regenerative dosing pumps that can be used for the transportation of fluids. They can even handle paste-like or aggressive fluids. Extremely small fluid quanitites can be dosed exactly. As the transported fluid only enters into contact with the tube being used, the pumps work sterilely, are corrosion-free and their cleansing is easy.
|
|
|
|
