|
|
DOSE IT – For easy dispensing of culture media and buffers
The programmable peristaltic pump DOSE IT is extremely simple to program and operate because of the intuitive user interface coupled with the large display. The setting of all functions and parameters is self-explanatory so that, with minimal learning time, everybody can start working immediately. A broad range of dose volumes can be dispensed with high accuracy since the DOSE IT is compatible with differently sized tubing: from 1 mm tubing for dispensing small doses to 8 mm tubing for high-throughput pumping. The compact and lightweight design allows the DOSE IT to be moved and placed virtually everywhere in the lab, further increasing its flexibility.
Special features:
• Easy to use - large display
• Handy – 20 dosing protocols can be saved
• Flexible - different tubing for dosing microlitres to litres
• Mobile - fits and goes everywhere
|
|
High Pressure
Blue-White's FLEX-PROTM A3 Peristaltic Metering Pump has Outstanding Benefits, including: Outputs to 126 LPH. Output Pressures to 8.6 Bar; Automated PPM Dosing; Self priming, No Bypass valves required; FLEX-PRO won't vapor lock or lose prime; One button Prime Mode for easy priming and servicing; Brushless Variable Speed Motor; digital touch pad with menu driven software; VGA Graphic backlit LCD displays motor speed, input signal values, service and alarm status; Inputs include: 4-20mA, 0-10Vdc, and Pulse Signal for external speed control, and 30 VDC contact closure for remote start/stop; Patented Tube Failure Detection System (U.S. Patent No.7, 001,153); NEMA 4X IP66. |
|
Easy Tube Loading IP66 Programmable AU.UPC.EZ.IP66 Autoclude Peristaltic Pump.
Single or repeat dose
Calibration facility
Brushless motor for 24 hr duty
Variable speed / flow rate
Manual, analogue or digital control
Easy tube change
Intelligent pump fitted with the Autoclude Easy Tube Load Pump Head change the tube size and the pump re-calculates flow rate and dose parameters. Dispenses doses singularly or as batch with speed ramp non drip feature.
Features:
User friendly keypad control
Two line alpha numeric display
Manual, analogue and digital control
Vary flow rate, speed & tube size
Tube size selector
Single or repeat dosing
Non-drip run back feature with speed ramp
Calibrate for viscous liquids
Low maintenance brushless motor
Easy tube load stackable pump head with three roller rotor
Washdown IP66 Enclosure
Technical:
Flow rates 0.8 to 1312 ml/min
Speeds from 10 to 250 rpm
Six tube sizes
Five tube materials
Remote speed control
0-10v dc, 4-20mA or 10K Pot
Remote Stop/Start/Reverse
Volt free contacts or 3-36v dc
RS232 computer signal interface
115/230v 50/60 Hz supply |
|
Verderlab pump heads distinguish themselves because of the highly perfected detail of construction and geometric design, achieved through an exacting engineering and design review process.
A tube bed is sized specifically for every tube dimension. This ensures that the pump head remains fixed in place inside the pump head without needing any additional clamps.
Precise manufacturing tolerances provide constantly maintained clearances between the ball bearing rotor and the tube bed, preventing back flow. Therefore higher volumetric efficiency can be achieved, which sets the standard for delivery capacity.
|
|
| Larox LPP-M Pump is ideal for accurate metering; an exact flow per revolution irrespective of the pipeline pressure as well as accurate metering throughout the whole flow range. Ideal for pumping diverse slurries and metering a wide range of media, in variety of industry fields ranging from chemical, construction and mineral processes to food and beverage industries. Dry run capability and self priming, exact flow per cycle. Seal less pumps will not get damaged even if they run dry for longer periods of time. Compact design and robust construction is straight designed to industrial use. LPP-M pumps have also the highest maximum working pressure on the markets and are equipped with a patented Tube Failure Detection (TFD). |
|
Peristalitc Pumps
SAFE AND RELIABLE
■ Polypropylene enclosure extremely shockproof and resistant to chemical aggression.
■ IP 65 protection degree and class 2 electrical insulation (no ground connection required)
USER FRIENDLY
■ Via trimmer settings simple and fast parameters configuration
■ Plugs for protecting settings to avoid undesired tampering
EASY INSTALLATION AND MINIMUM MAINTENANCE
■ Easy wall mounting and removing
■ Plugs on circuit board provide for a quick electrical connection
■ Easy tubing replacements. |
|
New 720
Peristaltic - chemical metering pumps -720 IP66 NEMA 4X cased pumps for high-flow processes, suitable for industrial and sanitary, flow rates of 2000 litre/hr with single pumphead, 3600:1 speed turndown, maintenance-free |
|
Autoclude has an extended program tube pumps, including housings. Dependant on the model the pumps are either very suitable for sampling. laboratory applications, continuous processes, batch dosing etc.
1. Cased Series, Easy tube load / IP66
The tube pumps with an easy tube load are available with 5 different tubing mateirals in six Ø sizes. There are 4 models; manual control, auto control, programmable and IP66 programmable dispenser. Flows up to 1,8 l/min.
2. Cased-series, Heavy duty 3000i / IP66
The tube pumps heavy duty have a robuuste pump head for cnotinuous operation. Special tubing for high viscous liquids. 5 tubing materials in 3 Ø sizes. There are for models; manual control, auto control, programmable and IP66 programmable dispenser. Flows up to 3,25 l/min.
3. Cased-series, 8000 Heavy duty
Tube pump, including housings for variable control (speed/flow). Flows up to 8 l/min.
4. Cased-series, Variable speed
Compact tube pumps with quick suction abilities. The design is robust to enable continuous operation. Flows up to 8 l/min. |
|
Verderlab peristaltic tube pumps
Series VL, Handy and VF
The Verderlab series of pumps comprises of the Verderlab peristaltic tube pumps, an extensive range of laboratory and pilot plant peristaltic tube pumps, providing numerous applications for laboratory and dosing applications.
|
|
| ... products without technical information |
| |
Piston pumps are precise and – compared to diaphragm dosing pumps – almost pressure-independent metering units. The flow rate changes in proportion to the stroke length and can thus be adjusted to very small values. Fields of application are – among others – process engineering and chemical processes, i.e.: wherever the medium must be metered precisely.
The FEDOS E / DX piston dosing pumps from Lutz-Jesco are available at flow rates between 0.17 and 31.5 l/h, with or without microprocessor control. Depending on the size of the pump, maximum pressures between 30 and 200 bar are admissible.
If no control is required for constant metering, the motor is connected directly to the terminal box. In this case, FEDOS E pumps are used. To change the flow rate, either the stroke length can be adjusted mechanically, or the speed of the motor is controlled by means of a separate frequency converter.
FEDOS DX pumps are used if an integration in controls or automatic control systems is requested.
FEDOS DX pumps allow the adaption to a large number of different control systems and system monitoring equipment. The signals required for the external avtivation of the pump can be simple voltage-free closing contacts from water meters or controllers or analog 0(4)...20 mA signals.
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Double Ball Check Valves
Pressures up to 10,000 psig (690 bar g)
Flows up to 1,225 gph (4,637 lph)
Meets API Standard 675
|
|
| FMI pumps are modular in design.The Pump Head Modules can be easily removed for cleaning or replaced with a spare pump head for use with different fluids. Some customers have separate pump heads for use with each fluid handled or flow rate desired. |
|
| ... products without technical information |
| |
The new K-Tron Bulk Solids Pump (BSP) feeders have been specifically designed and engineered to provide gentle, precise feeding of free-flowing pellets, granules, flakes, powders and friable products.
The BSP feeders do not use the usual screws/augers, belts or vibratory trays to convey the material. The feeder utilizes positive displacement action to feed free flowing materials with astounding accuracy, offering uniform discharge, consistent volume and gentle handling.
The BSP feeders have vertical rotating discs that create a product lock-up zone, conveying the material smoothly from storage hopper to discharge outlet, achieving true linear mass flow.
Utilizing a simple design and the principle known as "lock up" (see demonstration), the material in the feeder is moved together in true positive displacement, producing excellent linearity and breakthrough accuracy levels.
With no pockets or screws and only one moving part, the compact feeder is cleaned in seconds, making it ideal for applications with frequent material changes.
|
|
Characteristics
Horizontal or Vertical.
Single Stage.
Enclosed Impeller.
Applications
Water.
Waste Water.
River Water.
Rain Water. |
|
The DOPAG ELDO-MIX range of gear pump driven metering and mixing systems are built in modular form and are custom designed.
Depending on the specific application, various basic configurations are available. |
|
The MICRO-MIX range of systems are compact, pneumatic or electrically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4.
The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
The VARIO-MIX range of systems are solvent free, compact, pneumatic or hydraulically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4. The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
The DOPAG ELDO-MIX range of gear pump driven metering and mixing systems are built in modular form and are custom designed.
Depending on the specific application, various basic configurations are available. |
|
The MICRO-MIX range of systems are compact, pneumatic or electrically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4.
The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
The VARIO-MIX range of systems are solvent free, compact, pneumatic or hydraulically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4. The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
Features:
- Patented CeramPump® Design - One moving part, No Valves.
- Direct Coupled Synchronous Drive - Long term, drift-free accuracy.
- Inert Fluid Path - Excellent solvent compatibility
- Flows from 0-1380 ml/hr
- Kit Includes: Low Dead Volume Fittings, Teflon Tubing, Pulse Suppressor, & Dial Indicator for repeat flow settings of 0.1% |
|
|
|
