|
|
Albin ALH hose pumps - Handle the toughest applications
Best hoses on the market, multiple reinforced and precision manufactured layers.
From aggressive to shear-sensitive and viscous materials, the Albin Peristaltic Hose pumps can handle the toughest applications in the handling of raw materials and soap & detergents manufacturing processes.
Albin Hose pumps offer tremendous fluid transfer versatility, ranging from waste stream removal to offering an alternative solution to seal-less gear pumps when handling highly shear-sensitive products. The pumps also offer excellent lift capabilities, high discharge pressures and smooth tubing transfer of material.
|
|
M500 d.c. Standard, OEM Panel Mounted Category, Verderflex Peristaltic Pump.
By combining a low voltage d.c motor with the robust M500 pump a versatile unit with speed/flow rate variation options is achieved.
The pump is supplied as standard with Polycarbonate mouldings and a two roller rotor. Options of Noryl mouldings and a three roller rotor are available.
Flow rates up to 675 ml/min.
Tube: Verderprene, Silicone, Viton and Tygon
Motor: 12/24v d.c. Permanent Magnet
Gearbox: Spur
|
|
These pumps operate on a positive displacement principle. Because there are few moving parts and no valves or seals, the peristaltic pump is virtually maintenance free. No tools or disassembly is required to replace the tubing.
Peristaltic pumps are ideal for slurries, abrasive, viscous and corrosive liquids because only the tubing is in contact with the solution. Applications include a variety of chemical dispensing systems.
|
|
This particular peristaltic pump can operate between 1 and 30 seconds on
customers demand although it is powered by electricity. In addition with our nonreturn-
valve this solution can replace the membrane pump in between the boiler
circuit. This pump is independant from the water pressure and asure a significant
lifetime-cycle!
|
|
|
The dosing pump DUO CCS is working with the patented Chemical Control System CCS to control the used chemical permanently as well as the fill up level of the chemical container. Automatic switch off of the pump when mix up chemical or empty container. The tubematerial is also be secured against "wrong " chemical; the washing result can be re-produced at any time.
|
|
Albin ALH hose pumps - Handle the toughest applications
Best hoses on the market, multiple reinforced and precision manufactured layers.
From aggressive to shear-sensitive and viscous materials, the Albin Peristaltic Hose pumps can handle the toughest applications in the handling of raw materials and soap & detergents manufacturing processes.
Albin Hose pumps offer tremendous fluid transfer versatility, ranging from waste stream removal to offering an alternative solution to seal-less gear pumps when handling highly shear-sensitive products. The pumps also offer excellent lift capabilities, high discharge pressures and smooth tubing transfer of material.
|
|
Verderflex peristaltic pumps
NEW: DURA Series of peristaltic pumps
A new generation of smaller hose pumps, based on an innovative, close-coupled design. The features of this pump has exceptional dosing features.
DURA‘s Unique Design
Verderflex’s contribution to your productivity with its new generation pumps, simply serves to highlight our commitment to solutions in pumping technology.
The rotor is mounted on a drive shaft, which is located on a dual bearing hub.
Quieter operation because of ‘greased for life’ bearing
Design of the drive shaft dramatically reduces the loading on gearbox and motor.
Features
Ultra-compact construction, reduces required floor space by up to 70%.
Easy to install, virtually maintenance free and comply with ATEX standards.
Only wearing parts are the hose and lubricant.
Improved hose life through reduction in operating temperature
Improved frame design
One-size-fits-all slotted flange solution, incorporating ANSI; JIS & DIN
Executed with a taper-lock flange, which is suitable for pressures of up to 12 bar.
With high corrosion and abrasion resistance and an extended hose life, there can be no question that this pump is a real breakthrough in pumping technology.
|
|
Ideal for dosing and filling applications from 0.001 to 3700 ml/min
– powerful, programmable, IP65-rated dispensing pump
– dust-tight and waterproof against water jets from all directions
– no internal corrosion thanks to sealed stainless steel housing
– process suitable with batch programming capabilities
– memory saves up to 4 sets of operating parameters
– flow rate and volume can be calibrated
– bayonet coupling system for 20 interchangeable pump-heads
– pump-heads with 1 to max. 24 channels
– takes also ceramic piston pump-heads
Remote control
– RS232 "in" and "out"
– analog interface
– Software ProgEdit, Plugin for Labview (free download)
|
|
The neMESYS OEM tubing pump combines the approved peristaltic pump technology with the modular and extensible neMESYS drive and bus system from cetoni.
Because the only part of the pump in contact with the fluid being pumped is the interior of the tube, it is easy to sterilize and clean the inner surfaces of the pump. The use of a tube makes it a relatively low-cost maintenance item compared to other pump types. The neMESYS tubing pump also minimizes shear forces experienced by the fluid, which may help to keep colloids and slurry fluids from separating.
|
|
PUMP CONSTRUCTION
General Features
Positive displacement peristaltic hose type to handle a wide variety of chemicals and liquids; pump with movement by ROLLERS ON BEARINGS. Rollers position 120° N 3.
Features:
• Efficient roller technology
• Standard leak detector
• Compact foot print
• Capable of operating in either direction without flow variation
• Capable of running dry without damage to pump or hose
• Capable of pulling 98% of full vacuum
• Valveless, sealless and glandless
• Capable to transfer mixed phases without damages
• Capable to transfer sensitive products and pollutant products
Material of Construction:
• Stator: Cast iron
• Rotor: Cast iron
• Rollers: cast iron
• Mounting frame: Painted steel
Side Cover: Polystyrene
Available Hose Material:
• Natural rubber
• Nitrile rubber
• Hypalon rubber
• Epdm rubber
Hose Size (ID) 76 mm
Connections:
• 304 SS
• 316 SS
• PVC
• PP
• TITANIUM
Connections size:
• 3” ANSI or ISO PN 16
Leak Detector Switch Rating:
• 100VA Max, 230 V. , 2,5 amps
Operating Speed : Up to 48 rpm
Max Discharge pressure:
• 8-10 bar continous
• 12-15 bar intermittent
Max Suction lift mt 8,5
|
|
Flowmaster
ideal for heavy-duty processes, the most convincing solution for dispensing and filling applications in a dusty, humid or corrosive environment and in clean room areas
– easy tube exchange
– convex rollers treat the liquid gently
– protection rating IP65
– easy disassembly of the pump head
|
|
Verderlab pump heads distinguish themselves because of the highly perfected detail of construction and geometric design, achieved through an exacting engineering and design review process.
A tube bed is sized specifically for every tube dimension. This ensures that the pump head remains fixed in place inside the pump head without needing any additional clamps.
Precise manufacturing tolerances provide constantly maintained clearances between the ball bearing rotor and the tube bed, preventing back flow. Therefore higher volumetric efficiency can be achieved, which sets the standard for delivery capacity.
|
|
Focused Product Innovation
With 15% of our people devoted to R & D, we identify flexibility as the key to future development of our business. Our team often works on a one to one basis with our clients to develop unique pumps for every conceivable application.
|
|
Ideal pumps for analytical applications
Lowest pulsation (planetary drive) highest accuracy
Very high repeatability on all channels
4, 12, 16, 24 Channels, 0.0004 to 44 ml/min
IP and IP-N
without dispensing functions
microprozessor controlled, analog interface
IPC and IPC-N
with various dispensing functions
RS-232 and analog interface
|
|
Technical project support and firmware adaptation, our engineers welcome your ideas and are pleased to help realize your projects.
IDEX Health & Science: complete fluidic solutions, please visit our home page www.idex-hs.com
|
|
Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free.
Features
• Air-free dispensing
• Snuff-back prevents post-dispense dripping
• Simple load mechanism also provides easy cleaning
• Manual or Timed modes
• Large digital LED display
• Clean room compatible
|
|
Peristalitc Pumps
SAFE AND RELIABLE
■ Polypropylene enclosure extremely shockproof and resistant to chemical aggression.
■ IP 65 protection degree and class 2 electrical insulation (no ground connection required)
USER FRIENDLY
■ Via trimmer settings simple and fast parameters configuration
■ Plugs for protecting settings to avoid undesired tampering
EASY INSTALLATION AND MINIMUM MAINTENANCE
■ Easy wall mounting and removing
■ Plugs on circuit board provide for a quick electrical connection
■ Easy tubing replacements.
|
|
Ecoline
Economical and powerful stackable pumps for dispensing and filling applications with variable flow rates, robust stainless steel housing (stackable), various pump heads for flow rates up to 5400 ml/min, analog interface
Ecofluidic
without interface, cost effective tubing pump with variable speed for simple fluid transfer up to 3,8 Liter/min, innovative design for versatile applications
|
|
PUMP CONSTRUCTION
General Features
Positive displacement peristaltic hose type to handle a wide variety of chemicals and liquids; pump with movement by ROLLERS ON BEARINGS. Rollers position 180° N 2.
Features:
• Efficient roller technology
• Standard leak detector
• Compact foot print
• Capable of operating in either direction without flow variation
• Capable of running dry without damage to pump or hose
• Capable of pulling 98% of full vacuum
• Valveless, sealless and glandless
• Capable to transfer mixed phases without damages
• Capable to transfer sensitive products and pollutant products
Material of Construction:
• Stator: Aluminium (MS1-MS2) Cast iron (MS3)
• Rotor: Cast iron
• Rollers: Cast iron
• Mounting frame: Painted carbon steel
Side Cover: Acrylic
Available Hose Material:
• Natural rubber
• Nitrile rubber
• Hypalon rubber
• Epdm rubber
Hose Size (ID) 40-55-68mm
Connections:
• 304 SS
• 316 SS
• PVC
• PP
• TITANIUM
Connections size:
• 1”1/2 – 2” – 2”1/2 ANSI-ISO Flange
Leak Detector Switch Rating:
• 100VA Max, 230 V. , 2,5 amps
Operating Speed : Up to 100 rpm
Max Discharge pressure:
• 8-10 bar continous
• 12-15 bar intermittent
Max Suction lift mt 8,5
|
|
A new generation of smaller hose pumps, based on an innovative, close-coupled design. The features of this pump has exceptional dosing features.
Verderflex’s contribution to your productivity with its new generation pumps, simply serves to highlight our commitment to solutions in pumping technology.
The rotor is mounted on a drive shaft, which is located on a dual bearing hub.
Quieter operation because of ‘greased for life’ bearing
Design of the drive shaft dramatically reduces the loading on gearbox and motor.
Features:
Ultra-compact construction, reduces required floor space by up to 70%.
Easy to install, virtually maintenance free and comply with ATEX standards.
Only wearing parts are the hose and lubricant.
Improved hose life through reduction in operating temperature
Improved frame design.
One-size-fits-all slotted flange solution, incorporating ANSI; JIS & DIN.
Executed with a taper-lock flange, which is suitable for pressures of up to 12 bar.
|
|
10 stainless steel rollers with 5 rollers always in contact with the tubing, minimize pulsation at pressures up to 70 psi. 1-, 2-, 4-, 8-channel interchangeable heads.Unique cam-actuated tubing compression adjustment
Pumps Complete
Single-, two-, four- or eight-channel versions. Complete pump is shipped with head of choice and sample tubing in several diameters
|
|
|
The Abaque pump operates on the peristaltic principle which was patented in 1925 by Mr. Horthaus of France. It is classified as positive displacement pump meaning that a fixed and known amount of fluid is discharged per revolution of the pump with flow independent of discharge head. The pump operates by compressing a specially designed elastomeric hose between a set of two or more shoes attached to a rotor and the internal wall of the pump case or housing. Fluid in the hose is forced from the inlet side of the pump toward the discharge by the squeezing or compressing motion of the shoes on the rotor of the pump as it rotates. This peristaltic action is in some ways similar in nature to that of the human digestive tract.
|
|
PUMP CONSTRUCTION
General Features
Positive displacement peristaltic hose type to handle a wide variety of chemicals and liquids; pump with movement by ROLLERS ON BEARINGS. Rollers position 180° N 2.
Features:
• Efficient roller technology
• Compact foot print
• Capable of operating in either direction without flow variation
• Capable of running dry without damage to pump or hose
• Capable of pulling 98% of full vacuum
• Valveless, sealless and glandless
• Capable to transfer mixed phases without damages
• Capable to transfer sensitive products and pollutant products
Material of Construction:
• Stator: Aluminium
• Rotor: Carbon steel
• Rollers: 304 SS
• Mounting frame: 304 SS
Side Cover: Acrylic
Available Hose Material:
• Natural rubber
• Nitrile rubber
• Hypalon rubber
• Epdm rubber
• Pharmed
Hose Size (ID) 5-10-16-26 mm
Connections-Inserts
Connections-Inserts:
• 316 SS
• PVC
• PP
• TITANIUM
Connections size:
• 3/8” – 3/4” – 1”1/4 bsp
Leak Detector Switch Rating:
• 100VA Max, 230 V. , 2,5 amps
Operating Speed : Up to 140 rpm
Max Discharge pressure:
• 8-10 bar continous
Max Suction lift mt 8,5
|
|
Peristaltic pumps up to 170 ml/min
Our peristaltic pumps are regenerative dosing pumps that can be used for the transportation of fluids. They can even handle paste-like or aggressive fluids. Extremely small fluid quanitites can be dosed exactly. As the transported fluid only enters into contact with the tube being used, the pumps work sterilely, are corrosion-free and their cleansing is easy.
|
|
DosiPump DP1000
The Dosi-pump system was designed to be flexible and reliable versus current pumps in the market. The unit is user friendly and engineered for batch or continuous operation with minimal down time.
Dosing pumps are convenient expulsion pumps that are used to introduce fluids into any vessel. Dosing pumps are frequently use for dosing rough materials, acids, adhesives, chemicals, hazardous materials, liquid , agar or lubricants. Dosing pumps are also used to move gasoline, diesel fuel, and oil sludge, slurry gas and rendering wastes.
Dosing pumps are obtainable with lots of features and can transport media / agar either upright or parallel. Adjustable speed pumps can operate at speeds selected by an operator nonstop & maintain performance specifications at 100% cycle.
Features and Benefits
> Easy operation software operates with a touch screen.
> Anti-Drop, drip suppression by retraction of pump movement
> Dual head pump for smoother liquid / agar filling
> Pump offers high flow rates of up to 1,000 ml/min.
> Easy Volume and speed calibration
> Backlight graphics display for easy reading
|
|
The Micro-Peristaltic Pump is a very small peristaltic
pump where the motor reduction gear and pumping mechanism are contained in a
single case. The simple but clever pumping mechanism provides a gentle
pumping action, giving long tube life and minimizing damage to organic
materials contained in the fluid. No return valve is necessary under
appropriate conditions, and even solids of small size can be pumped. Very
little noise is produced. The tubing is easily replaced and discharge rates
of between 0.06-10ml/min are possible depending on the model. This pump is
intended for fuel cells analysis and medical and bio-applications etc.
Complete solutions and working systems incorporating this pump are also
provided.
|
|
The B-F series are fixed-flowrate peristaltic pumps enclosed in an IP67 plastic casing, designed primarily for kitchen and washing machine use. As in all our new ranges of peristaltic pumps, this pumps has its motor shaft (axle of rotating head) SUPPORTED AT BOTH ENDS. This gives better durability and resistance to wear and tear as compared with most other peristaltic pumps, which have their motor shafts usually supported only on one end.
(When supported at one end, the motor shaft bends with time - due to wear and tear, or over-pressure in the tubings. Symptoms of such damage is loss of flowrate, because the pumphead rollers is no longer able to squeeze on the pumphead tubing).
Another feature which makes the B-F series special is the ability to discharge with pressure.
The B-F series is similar to the B-V series, except that the B-V series have variable flowrates.
|
|
| ... products without technical information |
| |
|
|
