|
|
|
ATI Models Q45H62 and Q45H63 are reagentless and designed for on-line monitoring and control of chlorination systems. It is available in two versions: a free chlorine monitor for drinking water and cooling water, and a combined chlorine monitor ideally suited for “chloraminated” drinking water. The combined chlorine system can also be used in wastewater effluents where sufficient ammonia is present prior to chlorination to result in a predominantly monochloramine residual. Unlike on-line colorimetric and most amperometric monitors, Q45H systems utilize a membrane-covered polarographic sensor that does not require the addition of chemical reagents. The Q45H system has no moving parts, so there are no pumps or motors that burn out or tubing breaks that create maintenance nightmares. All normal maintenance items are included with each system.
|
|
PONSEL ACTEON 2011 pH / T
Online analyser to measure pH and temperature
Simplicity – Easy to use :
-Large graphic screen
-Intuitive menus
-2 relays
-2 4 - 20 mA
Combined pH/T sensor :
Robust –(PONSEL Plastogel technology)
For hash water (wastewater,…)
In pipe or in tank installation
|
|
With new technology
The LDO oxygen probe and the pHD sc pH probe stand for superior technology. The LDO-Sensor determines the dissolved oxygen with an optical method, no more replacing of electrolyte or calibration. No electrode poisoning can occur because of the closed pHD sensor design. Less work and a longer service life in combination with gerater reliabilty translate into lower operating costs and appreciably more process dependabilty.
Wide range of applications
HACH LANGE probes can be installed in tanks, pipes or in bypasses - suitable mounting devices are available for every application.
By the application-specific design the probes can be exposed to aggressive fluids or high pressures.
The electrodes are kept separate from the sensitive digital electronics in an enclosure made of resistant plastic.
|
|
|
|
|
|
The Neutronics Model HI-3000 Halon Identifier analyzes liquid samples of Halon 1301 taken from storage cylinders. The instrument displays the percentage purity of the Halon 1301 and identifies and displays percentages of the most likely contaminants: Halon 1211, R12, R22, and R134a. By correctly identifying the contents of Halon 1301 storage cylinders, contamination of expensive Halon 1301 can be eliminated.
Easy to Use
Model HI-3000 has five modes of operation: WARM UP, READY, SAMPLE, IDENTIFICATION, and PURGE. A series of LED lights guides the user through a simple operating procedure.
During the WARM UP mode, the system is purged with air and is auto calibrated. When the unit displays READY, the identifier is prepared for the test.
In the SAMPLE mode, a sample is drawn from the cylinder. The next step, IDENTIFICATION, analyzes the gas and displays the results. During the IDENTIFICATION mode, a printer can be attached to provide hard copy printout for records keeping and cylinder certification.
In the final PURGE mode, the HI-3000 automatically calibrates itself and returns to the READY mode.
|
|
Double-channel measuring and control instrument for free chlorine and pH-Value - additionaly ORP optional
- Double measurement of free chlorine and pH -optionally with additional ORP measurement
- Easy and safe operation by plain text menu guidance
- Log book function
- Graphical trend display of the last 3 h
description
The dialog W 2 CL2 PR R is a sophisticated instrument for the precise measurement and control of the chlorine concentration and the pH-value - additionally an ORP measurement is optional. It is available in a wall mounted housing.
|
|
The PCA 330 series of analyzers check pH/ORP and chlorine levels in applications such as pools and spas, drinking water and influent and effluent discharge of water to ensure public safety, prevent waste and protect the environment by reducing overdosage.
Features:
• pH regulation with both ON/OFF and proportional controls
• Separate alarms can be set for pH and chlorine controls
• Parameters can be sent through SMS
• Large graphical display with backlight
• User-friendly interface
• Can store up to 3500 data, that can be displayed or downloaded to a PC
|
|
pH / ORP ANALYZER
At the heart of the PHO6300 pH and ORP Analyzer is a K-series, polymer filled, glass electrode. The innovative design makes the electrodes more responsive and sustain a longer life than other electrodes. Unlike many pH analyzers, you don't need to search through dozens of pH electrodes to find one that works in your process. The K-series electrode works in all environments from pH 2 to 12, and in conductivity from 0 to 10,000µs. To help greatly simplify maintenance, the PHO6300 also offers self-cleaning and auto-calibration.
STANDARD FEATURES
- Continuously measures pH and/or ORP with temperature readout
- Patented polymer gel ‘double junction’
- Automatic temperature compensation
- Includes clear constant-head flowcell
- Multiple analog and digital outputs
- Modbus communication (RS485 & TCP/IP)
- Datalogging (1 year at 15 min. intervals)
- Graphical trend of last 60 logged values
- Detailed sensor diagnostic alarms
|
|
Complete pH system: featuring P53 controller and PEEK Body, wide-range sensor
* Model P53 pH and ORP Analyzer is a full-featured, easy-to-use instrument. The large backlit LCD graphic display shows the measured pH, process temperature, both analog ouput values, and relay status.
* PD1P1 Sensor is a high performance, differential technique, PEEK body pH sensor with built in preamplifier and integral 4.5m (15 ft) cable. 1-inch NPT threads at both ends for pipe Tee or pole mounting. Range 0-14 pH and 32 - 205 °F
See ALSO CONSIDER tab for other available sensors or Contact your Hach or GLI representative to configure the pH or ORP system for your application 1-800-227-4224.
|
|
alpha-pH800 1/4 DIN pH/ORP Controller
Featuring the powerful Eutech Application Specific Integrated Circuit (ASIC), the alpha pH 800 offers six sub menus in its menu-driven SETUP program for configuration of the controller, either for pH or ORP applications.
|
|
|
One cost-effective and convenient way to measure multiple parameters without the need to purchase many different meters is to make use of a multi-parameter meter. Most of these meters are able to measure 2 or more parameters. The models featured here measure pH, conductivity and dissolved oxygen.
|
|
|
|
|
|
The HI 9828 Multiparameter Portable Meter is a comprehensive analytical instrument, capable of measuring up to 13 critical water quality parameters (6 measured and 7 calculated), including pH, EC/TDS, ORP, DO, atmospheric pressure, and temperature. Some of the most advanced capabilities available are incorporated into this portable meter. Designed for intuitive operation, the menu-driven navigation is user-friendly and logical.
Engineered with smart features such as auto recognition of pH/ORP probe, auto-ranging adjustments for EC/TDS readings, and measurement check - to eliminate erroneous readings - and more, our design acually simplifies operations and handling. There is virtually no learning curve to getting into this meter and quickly mastering it's capabilities. For field applications, Hanna's Quick Calibration allows the user to standardize pH, conductivity and dissolved oxygen, all with one solution! While in calibration mode, the meter will also assess and verify probe functionality. For monitoring and recording data, HI 9828 can be equipped with Hanna's optional T.I.S. - Tag Identification System: iButton©s with unique ID numbers. Installed at any sampling site, these tags will record and match specific location information with logging data. Comprehensive GLP features, such as last calibration date and status information, calibration time-out, and date and time tags associated with sample measurements, ensure consistency and accountability. The LOGGER function memorizes data from each connected sensors and log-on-demand & automatic logging can record up to 60,000 data samples. All data is downloadable to a PC via USB connectivity.
|
|
Microprocessor-controlled instrument amplifier with integrated controller for water analysis of:
pH
Redox
Ion concentration
Electrolytic conductivity (conductive and inductive)
Active chlorine concentration
Total chlorine concentration
Chlorine dioxide concentration
Oxygen concentration
Ozone concentration
Hydrogen peroxide concentration
Features:
Backlit 2-line alphanumeric LC display with measuring units
Clear text human-machine interface with only 5 touch keys
Password protection against unauthorized operation
Temperature compensation manual or via Pt 100 / 1000 / NTC 22 kOhm (3-wire)
Galvanic separation of inputs and outputs
2 analog outputs, user configurable
Integrated controller with 2 switching points
2 limit switches with time-delay, allocated to alarm relay
Display of operating and status messages
|
|
This range of small probes with 3 mini-sensors measure pH, ORP, conductivity, temperature DO and level in wastewater, natural water and underground water. These SDI-12 ultra low comsuption probes can be connected to all SDI-12 systems
Using AQUA, AQUA 10 or AQUA 50 probes allows you to measure up to 6 parameters simultaneously: Temperature, Conductivity, pH, ORP, Dissolved Oxygen and Depth.
- Fast connection to ISCO devices, ADCON remote systems or any other instruments using the SDI12 protocol
- Ultra low consumption (40 µA)
- Connection of the sensors by simple "clip"
- Pocket size for maximum user convenience (length = 420 mm, diameter = 40 mm)
- Flexibility in use : its independent connection cable length allows adjusting cable length according to your needs
3 probes are available :
- AQUA : Wastewater
- AQUA 10 : Surface water (0-10 m),
- AQUA 50 : Underground water (0-50 m).
|
|
Hand-Held pH, Redox, Temperature Measuring Unit HND-R
Liquid Filled pH Combined Electrode, APS-X2Q
Gel-filled pH-Combined Electrode APS-X1Q
pH Electrode with Plastic Sheathing, APS-X5K
Gel Filled Combined Electrode, ARS-X1Q
Transmitters for pH-Value and ORP, APM-X
Gel-filled pH-Combined Electrode APS-Z
Transmitters for pH-value APM-Z
Gel Filled ORP Electrode, ARS-Z
Transmitter for ORP, ARM-Z
ORP Electrode with Plastic Sheathing, ARS-X5K
Inductive Conductivity Measuring Cell ACS-X0I
Hand-Held Conductivity Measuring Unit HND-C
Conductive Conductivity Measuring Cells, ACS-X
Transmitter for Specific Conductivity, ACM-X
Conductive Conductivity Measuring Cells, ACS-Z
Inductive Conductivity Measuring System, ACI-Z
Transmitter for Specific Conductivity, ACM-Z
Accessories for Analysing Devices
|
|
|
|
|
|
pH-ORP
Patented non-glass Durafet probes and traditional glass pH technology help measure, analyze and transmit pH and ORP information in industrial processes. Honeywell provides a complete line of analyzers and transmitters, and several mounting types.
7758/7758D Pipeline Mounting
The 7758 pipeline electrode mounting uses a stainless steel or polypropylene bushing with 3/4" NPT for mounting in pipelines.
7773/7773D Flow & Immersion Mounting
7773 mounting capabilities encompass the industrial measurements of pH, ORP, specific ion and temperature in a flow or submersion configuration.
7774/7774D Insertion Removal Mounting
The 7774 insertion/removal assemblies, which accommodate Durafet II and Meredian series combination (single-probe) pH or ORP electrodes, are designed for use in processes under pressure because the electrode can be inserted or removed without interrupting the process.
7777/7777D Immersion/In-Line Glass Mounting
Honeywell's 7777 series of electrode mountings enables users to interface Durafet II pH electrodes with a process via a ¾" threaded connection and Meredian II by either submersing the electrode or mounting it into a ¾" threaded connection.
7777DVP Immersion/In-Line Mounting
Honeywell's 7777DVP Series of electrode mountings enables users to interface Durafet III pH electrodes to a process via a ¾" threaded connection by either submersing the electrode or mounting it into a ¾" threaded connection.
7794DVP Sanitary Durafet III Mounting
The Sanitary Durafet III pH electrode has an integral, tri-clamp flange for easy mounting in the process.
HB Series Ruggedized Electrodes
Honeywell's HB Series of electrode mountings are designed for high temperature, high pressure and harsh chemical applications.
Transmitter - APT2000PH
The APT2000PH transmitter is a two-wire 24-volt device that continuously measures pH or ORP in industrial processes.
Analyzer - APT4000PH
The APT4000 pH/ORP analyzer continuously measures pH or ORP in industrial processes.
DirectLine DL421 pH Transmitter
The DL421 transmitter can be connected directly to the electrode as one integral mounted unit. Alternatively, the transmitter can be wall, pipe or DIN rail mounted remotely from the associated pH electrode.
DirectLine DL422 ORP Transmitter
The Meredian II ORP electrode can be located directly on to the DL422 transmitter module as one integral mounted unit. Alternatively the DL422 transmitter can be wall, pipe or DIN rail mounted remotely from the ORP electrode.
DirectLine DL1000 Durafet Mountings
DL1000 pH electrode in combination with DL421 pH transmitter either directly or remotely mounted offer an ideal end user solution to online pH measurement. Installation, maintenance and performance cost savings are assured.
DirectLine DL2000 Meredian Glass Mountings
For pH measurement the DirectLine transmitter modules can be mounted integrally or remotely with the DL2000 Meredian glass pH electrode.
DirectLine DL3000 ORP Mountings
For ORP measurement the DirectLine transmitter modules can be mounted integrally or remotely with the DL3000 ORP electrode.
Durafet non-Glass pH Sensor
The Durafet pH electrode is an industrial, non-glass, unbreakable, Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor that provides fast, accurate and dependable pH measurement in the most demanding applications.
HPW7000 HiPurity pH Measurement System
The HPW7000 HiPurity Water pH Measurement System is an electrode mounting assembly designed specifically for the difficult pH measurement in high-purity water applications.
TL1000 Durafet II Twist Lock Mounting
The TL1000 Series, Twist Lock Mounting, provides an easy way to install/remove Durafet III pH electrodes from pipelines and tees. A quick ¼ turn is all that is required for installation/removal.
Analyzer - UDA2182 Multiple Input
The UDA2182 Universal Dual Analyzer represents the latest in analyzer technology by providing the most versatile multiple-input analyzer package on the market for measurement of pH, ORP, conductivity and dissolved oxygen.
|
|
Conductivity
Honeywell conductivity technology helps measure, analyze and transmit valuable conductivity, resistivity and concentration information in simple and complex industrial processes with a complete line of analyzers, transmitters and conductivity cells.
Dissolved Oxygen
A complete line of analyzers, transmitters and dissolved oxygen probes ensures highly accurate, stable and trouble-free measurement in all types of applications.
pH-ORP
Patented non-glass Durafet probes and traditional glass pH technology help measure, analyze and transmit pH and ORP information in industrial processes. Honeywell provides a complete line of analyzers and transmitters, and several mounting types.
|
|
Orion 3-Star Plus Portable Conductivity Meter
- Improved stability algorithm to increase calibration and measurement accuracy
- Average slope and slope of segment printed with measurement
- Ability for ATC temperature calibration
- Increased data log points: 1000
- Ability to turn off data log
- Ability to print or view last 10 calibrations
- New Individual method passwords
- Third decimal point for cell constant entry
- Added 5 and 10°C as reference temperature options
- Added second decimal point to temperature compensation
- Ability to calibrate conductivity temperature sensor
|
|
Thermo Fisher Scientific offers a comprehensive range of Russell pH electrodes and electrochemical sensors. The full range of products includes meters, electrodes and ancillaries for the measurement of pH, ORP, conductivity, dissolved oxygen and specific ions. Water test strips and kits complement the range of products for the potable water and environmental testing markets. Thermo Fisher Scientific is committed to providing the best instrumentation for a wide array of laboratory analyses.
|
|
|
|
|
|
Orion ROSS Ultra® Premium pH Electrodes
The best of the best! The fastest response, highest accuracy, and best reproducibility that you can get with a pH electrode plus a 2 year warranty. ROSS Ultra pH electrodes combine all the benefits of the ROSS line with an extended life expectancy and minimized long-term drift. The ROSS reference offers stable, fast results regardless of temperature or sample composition.
Orion ROSS® pH Electrodes
The ROSS line offers precise pH measurements with unmatched stability, reliability, and rapid response regardless of temperature or sample composition. Since ROSS electrodes do not contain silver or mercury, they are well-suited for biological media, food, and pharmaceutical samples where metal ions cannot be tolerated. ROSS Sure-Flow® electrodes have a unique free flowing reference junction with an easy-to-clean design that assures stable, drift-free measurements.
Orion AquaPro Professional pH Electrodes
Low maintenance electrodes with an extended life, fast response, and clog-resistant junction. The double junction reference system prevents silver from coming in contact with the sample, so AquaPro electrodes can be used in samples where metal ions cannot be tolerated.
|
|
|
|
|
|
Our broad range of sensing systems apply sensor technologies directed at specific application challenges.
Flowing junction technology is used specifically for pure waters, whereas solid-polymer and solid-matrix sensors are used in aggressive process streams. High temperature measuring electrode are available for applications up to 140°C; while flat glass promotes self-cleaning efficiency in highly fouling media.
The AP121 is a highly process-resistant 12mm combination pH/Redox (ORP) electrode. It is equipped with a rugged solid electrolyte providing effective combat of process poisons and fluctuating pressures. The electrode has all three measuring elements located closely together and a very fast temperature response. This ensures high integrity of calibration and leads to tighter control. Already a number of years in service, the proven multi-pole VP connector facilitates easy connection and disconnection of multi-parameter sensor signals.
- Exceptional resistance to poisoning and pressure
- IP67 (NEMA 6P) ingress protection
- High corrosion resistance and steam sterilizability
- Assured high accuracy of calibration and operation
- Rapid response enabling tighter process control
- Unparalleled resistance to plugging
- Extended life and improved performance
|
|
|
|
|
|
Orion 3-Star Plus Portable pH Meter
This waterproof, battery-operated pH meter stands up to the most demanding field applications and delivers over 2,000 hours of continuous operation. Convenient Quick-Start Guide is located on the back of the meter to make the unit easy to operate in the field.
Featuring automatic or 1 to 5 point manual calibration, the rugged meter offers a full complement of GLP-related features. You can record and store up to 10 setup parameters and calibrations—a valuable feature for fast measurements in the field.
Additional features:
IP67 waterproof (may be immersed for up to one hour with no water incursion)
Waterproof BNC pH electrode connectors
Automatic or manual pH calibration with 1 to 5 calibration points
Auto-buffer-recognition of NIST/US and DIN buffers
Advanced self-tests on meter operation and self-diagnostics
200 point datalogger which is downloadable to printer or computer via RS232 or USB interface optional
CE, CSA, UL, T? and FCC Class A limits approved
Three-year replacement warranty.
|
|
|
|
|
|
Orion 960 Titrator
Ideally suited for dedicated, routine measurements, the Thermo Scientific Orion 960 is intended for use in laboratories where automation is needed to overcome problems of sample throughput or analytical complexity.
Product Detail
What differentiates the Orion 960 from other single parameter analyzers or automatic titrators is its versatility. Not only can it be used for performing classical titrations, it can also automate the measurement of any species measurable by ion selective and pH electrodes. All of the operating procedures appear on the instrument’s display in the form of easy-to-understand questions.
The 960 titrator is designed to overcome problems of sample throughput or analytical complexity. This versatile instrument can be used for classical titrations and automated analysis of any complex species measurable by ISE and pH electrodes. Utilizing 12 pre-programmed analysis techniques it is easy to operate.
The dispenser is a zero-dead-volume rotary reciprocating pump. Quick release fittings make it fast and easy to disconnect one bottle and connect another. For maximum versatility, you can integrate up to eight auxiliary dispensers and an autosampler into one system.
|
|
|
|
see the results for the following category : 
