|
|
A wide range of industrial electrodes and probes are conceived for different uses : water, wastewater, food, textile, paper, pharmaceutical, cosmetic, chemical industries.
A platinum resistance Pt 100 incorporated assures the mesurement and the automatic correction of temperature.
Wide ranges of adaptations :
- in tanks: canes up to two meters
- on pipes: stainless steel, polypropylen, PVC
- in reactors: sleeves to be soldered
|
|
Other Sensors Hach LDO Temperature Dissolved Oxygen Conductivity pH Depth/Vented Level Turbidity: Self-Cleaning Turbidity: 4-Beam ORP Chlorophyll a by Turner Designs Blue-Green Algae by Turner Deigns Rhodamine WT by Turner Designs Total Dissolved Gas Ion Selective Electrodes Li-Cor® Ambient Light Conductivity
The Hydrolab Conductivity sensor uses four graphite electrodes in an open cell design to provide extremely accurate and reliable data with virtually no maintenance.
Features:
Design based on four graphite electrodes in an open cell design
The probe measures the current between 2 electrodes held at a fixed potential; additional electrodes are used to compensate for any fouling of the electrode surfaces
Sensor measurements used to derive Salinity, Total Dissolved Solids, and Resistivity
|
|
|
Hamilton 2-Pole and 4-Pole Conductivity sensors are made to meet all of your conductivity measurement needs.
|
|
Conductive conductivity sensor
- Integrated Pt 100 temperature sensor
- Little dirt-prone - easy to clean
- 3/4 male threat for installation in tanks or pipes
description
2-electrode conductivity sensor for electrolytic conductivity. Body material PVDF, electrodes material stainless steel (concentric electrodes, material number 1.4571). PVDF male thread 3/4" for mechanical installation and 4-pole angular plug connector for electrical connection. Integrated temperature sensor Pt 100.
|
|
pH measurement is usually done with the use of a combination electrode. The combination electrode is an electrode system formed by a glass sensing half-cell and an internal reference half-cell. As the reference junction acts as the medium of conductor between the reference electrolyte and the sample to be measured, it must allow free movement of electrons through the junction and into the sample.
A potential develops on the membrane surface when a pH electrode comes into contact with a sample and its value varies with the pH of the sample. This variation in potential is measured in mV by a meter and is converted to direct pH values.
|
|
|
|
|
|
Stable reference systems are the heart of reliably functioning, long-lasting electrodes. In pH measurement up till now, the user was not spared the need for frequent calibration. The reason for this lies in shifting reference potentials due to chloride loss in the reference electrolyte. However, contaminated and partially clogged diaphragms also contribute considerably to changing properties in pH electrodes, which can only be resolved with a fresh calibration. For pH measurements where a very high degree of accuracy is required, it should therefore be sufficient if the pH sensor is calibrated just before measuring. But in industrial applications - especially in the case of online pH measurement - this is possible only with a great deal of effort, if at all. What is even worse: even if a calibration with certified pH buffers is correctly carried out, the very next measurement will not necessarily be accurate! Depending on the age of the electrode or, more precisely, the state of the diaphragm and the chloride content in the reference electrolyte, different diffusion potentials may occur in buffers and measurement medium. Technically speaking, it is impossible to eliminate this source of error entirely, but with pHeasy technology it is possible to detect it online!
Hamilton, with its pH glasses and the ingenious inner buffer, has built true long term stability into pHeasy electrodes.
|
|
pH sensor
- Low alcaline error
- Higher life expectancy, given that refillable
- Blocking resitant
description
The Kuntze AH-300-K-2-1 is a combination electrode with ceramic junction for pH measurement. The sensor is liquid filled, thus blocking resistant and particulary suitable for lightly polluted media.
|
|
pH Sensor
The Pico pH sensor is a robust epoxy bodied pH electrode ideal for educational use. The pH sensor consists of a standard electrode capable of measuring the full to 0 to 14 pH range. The electrode comes complete with a small bottle of storage solution to help prevent it drying out. Output is via a BNC connector.
|
|
| ... products without technical information |
| |
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
A range of standard sensors you will find in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Data Loggers
- Hygrometers
- Transmitters
|
|
|
|
|
|
Thermocouple Assemblies - Components and Descriptions
Conax Technologies thermocouple assemblies represent the culmination of 50 years experience in the design and manufacture of temperature sensors. Conax Technologies thermocouple designs have proven their durability and reliability in applications ranging from large industrial processing plants to highly specialized laboratory testing and validation. Our extensive knowledge of the science of temperature measurement and the physical properties of materials used for sheathing and insulation enables our sales engineers to recommend the most effective solutions to your application needs.
Conax Technologies thermocouple assemblies offer a wide variety of termination styles and mounting fittings, as well as extensive choices in sensor calibration, sheath diameter and sheath material. This section outlines the key choices needed to specify the correct Conax Technologies part description for your needs. In each case, you will be asked to select the:
*sensor calibration
*sheath material and size
*tip configuration
*termination style
*optional mounting configuration
*sheath length
If at any time you require assistance, call 1-800-223-2389.
|
|
In oder to meet with all applications, this new range is composed of thermocouple probes with connection head, heat resisting steel sheath, mounted on cable or malleable mineral insulated, with a measuring range from –40 to +1100°C.
The new range is also composed of Pt100 probes with standard connection head, threaded compression fitting, contact, ambient end, for food industry, penetration and with a measuring range from –40 to +400°C.
A large choice of accessories ( mounting brakets, compression fittings, connectors, cables ….) and converters offered by KIMO allow you to enlarge thermocouple and Pt100 working conditions.
Join our distribution network all over the word....Contact us !
|
|
- Tip-sensitive (260°C) feature fast-responding copper tip in stainless sheath.
- Mineral insulated (600°C): Stable and rugged for demanding industrial environments.
- High temperature (850°C): Laboratory grade precision in an industrial probe.
- Diameters options include 0.125", 4 mm, 0.188", 0.215", 6 mm, 0.250"
- Single and dual elements
- Wide selection of adjustable fittings, thermowells, and connection heads available from stock
- Cut-to-length option lets you adjust probe length in the field
|
|
K, T, J and E Thermocouple Types
Made from Class 1 Tolerance Wire
PFA Insulation. (max. 260°C)
Kapton Insulation (max. 315°C)
Glass Braid Insulation. (max. 480°C)
1 and 2m Lengths Standard
Max Service Temp for Connector Body 220°C
|
|
| ... products without technical information |
| |
Max. Temp: 150°C for Standard Probe
36" Insulated, 26 AWG Stranded Lead Wire
316SS Sheath
1/8, 3/16 and 1/4 " Diameter Sheaths Available
2252 Ohm, 0.2°C Elements Standard, Other 44000 Series Elements Also Available
|
|
- PT100, PT1000, PTC, NTC
- Liquids and gas application
- Brass or St. Steel probe material
- 1/8" to 3/4" male process connection
- Pmax = 50 bar
- Protection class IP65
|
|
General description:
Multi-purpose temperature probe with 2-1/2" (64 mm)-long stainless steel housing.
Use to measure temperature of air, soil, or water. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Includes 15' (4.6 m) direct-burial cable.
Compatible with both original Vantage Pro and Vantage Pro2.
|
|
Temperature
The Hydrolab temperature sensor is a 30k ohm variable resistance thermistor. The temperature sensor is included with every Hydrolab sonde.
Features:
- 316 Stainless Steel, 30k ohm thermistor
- Variable resistor
Benefits:
- Provides critical compensation for Dissolved Oxygen, Conductivity, pH, and nutrient sensors
- Compliant with EPA170.1 and SM2550B
|
|
| ... products without technical information |
| |
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
B&B Thermo-Technik is specialized in the production of gas analysis probes. Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
You will find our range of standard sensors in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Indicators
- Data Loggers
- Hygrometers
- Transmitters
|
|
Conax Technologies retractable Sample Probe Assemblies are used to hot tap or inject into basically any type of liquid or gas stream. Typical applications of a sample probe are gas sampling, oil samplling, oxygen sampling, potable water sampling, waste water sampling, water quality sampling, and water or chemical injection.
Optional materials
Optional materials for the Sample Probe and the Conax Technologies Packing Gland body (wetted components) are available. Refer to the Conax Pressure and Vacuum Sealing Assemblies Catalog #5001C or our website for available options such as:
316L SST
316 NACE SST
316L CRN (gland body only)
Monel 405
Hastelloy C276
Inconel 600
Temperature and Pressure Ratings
Refer to the Conax Technologies Pressure and Vacuum Sealing Assemblies Catalog #5001C for temperature and pressure ratings for static conditions. Pressure ratings are reduced when the sealing gland cap is loosened to allow for the insertion or extraction of the Sample Probe.
|
|
|
|
|
|
Either in environmental related gas analysis like stack testing, continuous emission monitoring (CEM), vehicle emission testing or LEL warning indication and in process applications like combustion efficiency monitoring, boiler trim, ethylene plants or petro chemistry, sample gas needs to be extracted from the gas stream.
It is obvious, that for a reliable analysis the sample gas must be extracted free of ambient gas leaking into the system and at the same time the dew point of the sample must remain stable.
This explains why the sample gas probe is the important interface between the process and the analyser system.
Quality, reliability and low operation cost have been the main targets for the development of this programme. The results are outstanding: the modular design allows application specific combinations in a very price effective manner.
The GAS 222 series of sample probes provides "down to earth" solutions based on advanced modular designs.Depending on the application, a variaty of heated or unheated basis units can be combined with in-situ or downstream filters. The filter material can be chosen from sintered ceramic to sintered stainless steel or even pleated stainless steel. Filters with large surfaces provide long life time. For the in-situ filters a highly efficient blowback system is available at reasonable cost.
Bühler sample gas probes are the best solutions if cost effective installation and low operational cost are a concern!
|
|
|
The Clif Mock sample probe was the first truly isokinetic sampler available for crude oil sampling and is still the most accurate and reliable method for extracting a sample from a pipeline for BS & W analysis. Designed to be used with C-22 Isokinetic Samplers, the CD20 drive units are available in four configurations and are capable of pulse counting, timing, pacing from computer and sending out a "loss-of-signal" alarm. In the last few years, there has been increasing demand for much more elaborate systems. These CLIF MOCK True Cut™ systems commonly have multiple receptacles for separate products or batching operations and have controllers, which interface with central computer systems.
|
|
The gas sample probes are used for continuous extraction of gases from dust loaden, high temperature or humid processes for the gas analysis.
Unheated, heated, explosion proof and portable versions are available.
Due to its modular design the gas sample probes can be adapted to nearly all process conditions.
.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
