|
|
Turbidity Meter LAT-N1
Turbidity Meter LAT-N2
Turbidity Meter LAT-N3
Turbidity Meter ATA-K
Turbidity Meter ATS-K
|
|
The microprocessor-based waterproof TN100 meter is an easy-to-use turbidimeter that meets the rigor of rugged field applications. It is a "must -have" for anyone monitoring turbidity on the go. Using an Infrared light source, it delivers laboratory accuracy with a resolution of 0.01 NTU across an extended range of up to 20 NTU (Nephelometric Turbidity Units).
Product Features :
- IP67 Waterproof and Dustproof - Cleaning and maintenance is simple. It floats!
- Automatic Push-Button Calibration (4 points) for unprecedented full-range accuracy
- Sturdy Carrying Kit complete with 4 calibration standards, 3 empty cuvettes, batteries and comprehensive instruction manual
- Power-saving feature allows over 1200 measurements to be taken with a single set of AAA alkaline batteries
- Large Easy-to-Read Display for optimum viewing of measurements with user-friendly message codes for easy troubleshooting
- Meets Performance Criteria as specified by ISO 1727 (DIN EN 27027) method.
|
|
|
The Verimet® M4900C is especially well-suited for measuring the conductivity of aluminum and aluminum alloys. It tracks the temperature coefficient (typically aluminum) using a single-knob control to adjust the readings. Compensation is accurate to 0.5% I.A.C.S. over the full range of 12% to 110% I.A.C.S. (5.75% to 52.8% MegaSiemens). The M4900C has an accuracy of 0.3% over the aluminum range of 30% to 62% I.A.C.S. The Verimet® M4900C tester works well on rough or finished surfaces, including forgings, castings, sheet stock and small parts of reasonable mass. Penetration depth is constant, irrespective of material or conductivity.
|
|
|
Quality for highest demands without compromises. The user is supported perfectly and all the requirements to GMP/GLP/ISO are totally fulfilled.
|
|
Features:
- Rugged design for handheld or bench top use, neckstrap for "hands-free" operation.
- Large 3-1/2 digit LCD built into adjustable "flip-up" cover.
- Wide measuring range from 10 to 19,990 uS/cm for conductivity or 10 to 19,990 ppm for TDS.
- Calibrate for changes in cell constants via a cell adjust.
|
|
|
Quality for highest demands without compromises. The user is supported perfectly and all the requirements to GMP/GLP/ISO are totally fulfilled.
|
|
|
Quality for highest demands without compromises. The user is supported perfectly and all the requirements to GMP/GLP/ISO are totally fulfilled.
|
|
|
The compact and versatile Ultra Basic Meters offer precision and simple operation with little required space.
|
|
Features:
- Rugged design for handheld or bench top use, neckstrap for "hands-free" operation.
- Large 3-1/2 digit LCD built into adjustable "flip-up" cover.
- Wide measuring range from 10 to 19,990 uS/cm for conductivity or 10 to 19,990 ppm for TDS.
- Calibrate for changes in cell constants via a cell adjust.
|
|
Features:
- Microprocessor based with splash proof housing.
- Large LCD built into adjustable "flip-up" cover. Simultaneous display pH and Temperature.
- Rugged design for handheld or bench top use, neckstrap for "hands-free" operation.
- Automatic or manual temperature compensation. °C/°F switchable
- Simple to calibrate by one keyboard for 5 points buffer, calibration value can be adjusted as needed.
- Memory stores and recalls up to 20 points. Min/Max storage and recall. (PP-206 only)
- Indicate percentage of slope (PTS) after calibration.
- Low battery and consumption indicator.
- Auto shut off after 10 minutes of non use.
|
|
The presence of free water in hydraulic fluids results in turbidity, impeding the proper function of the entire system and reducing the service life of the hydraulic fluid and of the circuit components. The PiT 400 sensor has been designed to identify the ingress of water in a circuit, rapidly and reliably. The PiT 400 can be applied in all fluid-based circuits where there is a risk of contamination by water.
|
|
POCKET Colorimeter II
More than 30 flexible, single parameter instruments
- Easy operation
- Small enough for almost any pocket
- Reliable results without a mains connection
- Rugged construction yet lightweight
DR 800 series—compact colorimeters
The DR 800 models are preprogrammed for different numbersof tests:
– DR 820: 20 tests
– DR 850: 50 tests
– DR 890: 90 tests
All three DR 800s work best in combination with the practical HACH tests for reliable, fast results in wastewater, drinking water and process water analysis.
|
|
WTW has developed a new line of field instruments based on optical measurement offering the following capabilities:
• pHotoFlex: photometry, pH
• pHotoFlex Turb: photometry, pH, turbidity
• Turb 430 IR and Turb 430 T: turbidity
The instruments have been designed to extract the optimum performance from the latest generation optics optics with state-of-the-art LED technology.
Remarkable features include:
• Low power consumption
• Robust
• Display-driven user interface
• Waterproof
• Integrated smart cuvette adapter for 16 and 28 mm cuvettes
• Hand held
The exceptional versatility of the pHotoFlex, pHotoFlex Turb and Turb 430 makes them ideal for use in process control, water analysis, and the beverage industry.
Both pHotoFlex and pHotoFlex Turb are equipped with a pH function, measuring the full pH range from –2.00 to 16.00. The pH measurement is simplicity itself, offering automatic temperature compensation and auto buffer recognition.
For turbidity measurement the Turb 430 IR offers a large range from 0-1100 NT/FNU. Outstanding features include: Automatic 3-point calibration, GLP compliant data export via RS 232, calibration record and the setting of a calibration interval.
|
|
|
The digital salt-meter, ES-421 employs a funnel-shaped sensor section ( conductivity ) , which measures the salt % of a sample ( dilute solution of soy sauce, ketchup,mayonnaise, Worcester sauce, sqeezed juice of pickles, etc. ) very small sample needed ( 1.0ml approx. is enough for measurement ) .
|
|
Features:
- Microprocessor based design with large LCD displays Conductivity or TDS or Salinity and Temperature simultaneously..
- Rugged design with splash proof housing for handheld or bench top use, neckstrap for ˇ°hands-freeˇ± operation.
- Automatic Temperature Compensation(ATC) and degree ˇć/¨H switchable.
- Simple to calibrate by one button, 3 ranges of standardizing solution are necessary for the automatic calibration recognition procedure.
- Memory function stores and recalls up to 25 points. MAX/MIN and data Hold.
- Low battery and consumption indicator. Auto shut off after 10 minutes of non use, but except status at MAX/MIN mode.
|
|
| ... products without technical information |
| |
|
|
