|
|
Measures conductivity, resistivity or concentration, displaying the results in conductance per meter or centimeter, resistance per meter or centimeter, % or g/L. Used with a wide selection of probes. Easily configured for a diverse range of applications. Application-specific temperature compensation capabilities. 2-electrode self-checking sensor for constant compensation for polarization or coating errors. Choice of calibration method.
-Easy to use with large clear display and simple programming
-2 smart analog outputs: 0/4 to 20mA
-Options of relay outputs, RS485 output and NEMA 4X (~IP66) protection
|
|
Single channel transmitter for glass and antimony pH electrodes, or redox measurement. Simple to use with large graphic display and easy programming. Auto diagnostics for true measurement of electrode impedance.
Wide choice of temperature compensations.
-Auto calibration in standard buffers.
-0 to 20mA or 4 to 20mA outputs
-Bi-directional proportional controller for pulse contact or frequency output
|
|
Product Features :
- User-Customisation through Scrolling Menu, 14-Segment LED - intuitive user interface guides user easily through setup functions
- Multi Measurement Range- User Selectable
- Galvanically Isolated 4-20 mA Output for remote monitoring or hardcopy recording
- Universal Power Supply Input from 85 to 250 VAC/DC allows use at multiple sites and withstands voltage fluctuations
- Two Level Password Protection prevents un authorized tampering with settings
- Automatic Temperature Compensation with 3-wire Pt 100 system ensures accurate readings under fluctuating temperatures
- Adjustable Temperature Coefficient (0.0 to 5.0%/oC) and selectable cell constants for more accurate measurements
- Adjustable Hysteresis (Dead Band) prevents rapid contact switching near set point
- Non-Volatile Memory retains all stored parameters and calibration data even if power fails
- Easy Installation and Wiring with detachable plug-in connectors
Applications :
TDS200: Ideal for drinking water, monitoring and control, hydroponics and aquaponic solution balance and control, pools and spa hardness and salinity control. |
|
pH-ORP
Patented non-glass Durafet probes and traditional glass pH technology help measure, analyze and transmit pH and ORP information in industrial processes. Honeywell provides a complete line of analyzers and transmitters, and several mounting types.
7758/7758D Pipeline Mounting
The 7758 pipeline electrode mounting uses a stainless steel or polypropylene bushing with 3/4" NPT for mounting in pipelines.
7773/7773D Flow & Immersion Mounting
7773 mounting capabilities encompass the industrial measurements of pH, ORP, specific ion and temperature in a flow or submersion configuration.
7774/7774D Insertion Removal Mounting
The 7774 insertion/removal assemblies, which accommodate Durafet II and Meredian series combination (single-probe) pH or ORP electrodes, are designed for use in processes under pressure because the electrode can be inserted or removed without interrupting the process.
7777/7777D Immersion/In-Line Glass Mounting
Honeywell's 7777 series of electrode mountings enables users to interface Durafet II pH electrodes with a process via a ¾" threaded connection and Meredian II by either submersing the electrode or mounting it into a ¾" threaded connection.
7777DVP Immersion/In-Line Mounting
Honeywell's 7777DVP Series of electrode mountings enables users to interface Durafet III pH electrodes to a process via a ¾" threaded connection by either submersing the electrode or mounting it into a ¾" threaded connection.
7794DVP Sanitary Durafet III Mounting
The Sanitary Durafet III pH electrode has an integral, tri-clamp flange for easy mounting in the process.
HB Series Ruggedized Electrodes
Honeywell's HB Series of electrode mountings are designed for high temperature, high pressure and harsh chemical applications.
Transmitter - APT2000PH
The APT2000PH transmitter is a two-wire 24-volt device that continuously measures pH or ORP in industrial processes.
Analyzer - APT4000PH
The APT4000 pH/ORP analyzer continuously measures pH or ORP in industrial processes.
DirectLine DL421 pH Transmitter
The DL421 transmitter can be connected directly to the electrode as one integral mounted unit. Alternatively, the transmitter can be wall, pipe or DIN rail mounted remotely from the associated pH electrode.
DirectLine DL422 ORP Transmitter
The Meredian II ORP electrode can be located directly on to the DL422 transmitter module as one integral mounted unit. Alternatively the DL422 transmitter can be wall, pipe or DIN rail mounted remotely from the ORP electrode.
DirectLine DL1000 Durafet Mountings
DL1000 pH electrode in combination with DL421 pH transmitter either directly or remotely mounted offer an ideal end user solution to online pH measurement. Installation, maintenance and performance cost savings are assured.
DirectLine DL2000 Meredian Glass Mountings
For pH measurement the DirectLine transmitter modules can be mounted integrally or remotely with the DL2000 Meredian glass pH electrode.
DirectLine DL3000 ORP Mountings
For ORP measurement the DirectLine transmitter modules can be mounted integrally or remotely with the DL3000 ORP electrode.
Durafet non-Glass pH Sensor
The Durafet pH electrode is an industrial, non-glass, unbreakable, Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor that provides fast, accurate and dependable pH measurement in the most demanding applications.
HPW7000 HiPurity pH Measurement System
The HPW7000 HiPurity Water pH Measurement System is an electrode mounting assembly designed specifically for the difficult pH measurement in high-purity water applications.
TL1000 Durafet II Twist Lock Mounting
The TL1000 Series, Twist Lock Mounting, provides an easy way to install/remove Durafet III pH electrodes from pipelines and tees. A quick ¼ turn is all that is required for installation/removal.
Analyzer - UDA2182 Multiple Input
The UDA2182 Universal Dual Analyzer represents the latest in analyzer technology by providing the most versatile multiple-input analyzer package on the market for measurement of pH, ORP, conductivity and dissolved oxygen.
|
|
pH-ORP
Patented non-glass Durafet probes and traditional glass pH technology help measure, analyze and transmit pH and ORP information in industrial processes. Honeywell provides a complete line of analyzers and transmitters, and several mounting types.
7758/7758D Pipeline Mounting
The 7758 pipeline electrode mounting uses a stainless steel or polypropylene bushing with 3/4" NPT for mounting in pipelines.
7773/7773D Flow & Immersion Mounting
7773 mounting capabilities encompass the industrial measurements of pH, ORP, specific ion and temperature in a flow or submersion configuration.
7774/7774D Insertion Removal Mounting
The 7774 insertion/removal assemblies, which accommodate Durafet II and Meredian series combination (single-probe) pH or ORP electrodes, are designed for use in processes under pressure because the electrode can be inserted or removed without interrupting the process.
7777/7777D Immersion/In-Line Glass Mounting
Honeywell's 7777 series of electrode mountings enables users to interface Durafet II pH electrodes with a process via a ¾" threaded connection and Meredian II by either submersing the electrode or mounting it into a ¾" threaded connection.
7777DVP Immersion/In-Line Mounting
Honeywell's 7777DVP Series of electrode mountings enables users to interface Durafet III pH electrodes to a process via a ¾" threaded connection by either submersing the electrode or mounting it into a ¾" threaded connection.
7794DVP Sanitary Durafet III Mounting
The Sanitary Durafet III pH electrode has an integral, tri-clamp flange for easy mounting in the process.
HB Series Ruggedized Electrodes
Honeywell's HB Series of electrode mountings are designed for high temperature, high pressure and harsh chemical applications.
Transmitter - APT2000PH
The APT2000PH transmitter is a two-wire 24-volt device that continuously measures pH or ORP in industrial processes.
Analyzer - APT4000PH
The APT4000 pH/ORP analyzer continuously measures pH or ORP in industrial processes.
DirectLine DL421 pH Transmitter
The DL421 transmitter can be connected directly to the electrode as one integral mounted unit. Alternatively, the transmitter can be wall, pipe or DIN rail mounted remotely from the associated pH electrode.
DirectLine DL422 ORP Transmitter
The Meredian II ORP electrode can be located directly on to the DL422 transmitter module as one integral mounted unit. Alternatively the DL422 transmitter can be wall, pipe or DIN rail mounted remotely from the ORP electrode.
DirectLine DL1000 Durafet Mountings
DL1000 pH electrode in combination with DL421 pH transmitter either directly or remotely mounted offer an ideal end user solution to online pH measurement. Installation, maintenance and performance cost savings are assured.
DirectLine DL2000 Meredian Glass Mountings
For pH measurement the DirectLine transmitter modules can be mounted integrally or remotely with the DL2000 Meredian glass pH electrode.
DirectLine DL3000 ORP Mountings
For ORP measurement the DirectLine transmitter modules can be mounted integrally or remotely with the DL3000 ORP electrode.
Durafet non-Glass pH Sensor
The Durafet pH electrode is an industrial, non-glass, unbreakable, Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor that provides fast, accurate and dependable pH measurement in the most demanding applications.
HPW7000 HiPurity pH Measurement System
The HPW7000 HiPurity Water pH Measurement System is an electrode mounting assembly designed specifically for the difficult pH measurement in high-purity water applications.
TL1000 Durafet II Twist Lock Mounting
The TL1000 Series, Twist Lock Mounting, provides an easy way to install/remove Durafet III pH electrodes from pipelines and tees. A quick ¼ turn is all that is required for installation/removal.
Analyzer - UDA2182 Multiple Input
The UDA2182 Universal Dual Analyzer represents the latest in analyzer technology by providing the most versatile multiple-input analyzer package on the market for measurement of pH, ORP, conductivity and dissolved oxygen.
|
|
utech Instruments' Differential pH/ORP Measurement Technology consists of the alpha pH 2000D controller and a pH/ORP differential electrode. Unlike conventional combination electrodes, the differential electrode is designed for more durability in harsh industrial environments such as
wastewater treatment.
The unique electrode design prevents fouling of the reference electrode system.
The salt bridge and reference solution is replaceable hence providing greater reliability, better accuracy and a more cost effective measurement system. |
|
| ... products without technical information |
| |
Order Code M-RTU:
- Configuration I/O: 4 DI, 2 AI, 2 DO (version GP), 2 DI, 2AI (version PC)
- Integrated Modem GSM Full Type Approval
- Memories: EEPROM 64 KB, Flash 2 MB
- Temporary turn on for sms receiving / sending
- Data transmission on event or on demand
- IP44 external case
- 14,4 V battery power supply, 3 years life-time |
|
Wireless I/O solutions from Phoenix Contact offer flexible and reliable data transmission for your applications. Monitoring and controlling your processes is reliable with point to point, and multipoint to point industrial radios.
These industrial radios can be incorporated into controlling pump stations, monitoring tank levels and sensors as well as a variety of additional industrial applications. |
|
PERFORMANCE
Power Output: 500mW@5V(Default), 1W@9V(customized)
RF Line-of-sight Range: 4000m@1200bps, 2000m@9600bps
RF Effective Rate: 1200/2400/4800/9600/19200/38400bps optional Receiver Sensitivity: -124dBm@1200bps, -118 dBm@9600bps
Supply Voltage: +4.75~5.5VDC
Transmit Current: <400mA@500mW, <500mA@1W
Receive Current: <40mA
Sleep Current: <5µA optional ex-factory
Frequency Band: 433MHz(Default)
400MHz~470MHz(customized)
Channel: 8(Default), 16/32 (customized)
Default Interface: COM1:TTL/UART,COM2:Non-Standard RS232 or RS485
Size: 53mm×38mm×10mm
Weight: 34g
Antenna Base: 50Ω
Operating Temperature: Industrial: -35℃~+80℃(TCXO crystal)
Commercial: -20℃~+60℃
Frequency Stability ±2.5ppm Industrial
±10ppm Commercial |
|
25kHz UHF Narrow Band FM Multi Channel Transmitter and Receiver.
The TLC2H transmitter and RLC2H receiver offer a low power, reliable data link in an industry standard pin out and foot print.
This makes the TLC2H/RLC2H pair ideally suited to those low power applications where existing wideband modules have insufficient range, or where low cost multi-channel operation is needed without compromising on RF specification or regulatory requirement.
|
|
Power Output:10~20mW. Single transmitter
RF Line-of-sight Range:≥800m
RF Effective Rate: 1200bps(Default),4800bps(customized)
Supply Voltage: 3.1~5V
Transmit Current: <45mA
Sleep current: <20µA
Frequency Band: 430.675MHz(Default)430~435MHz(customized)
Channel: Single Channel
Bandwidth: 10kHz
Interface: TTL(Default), download/setup
Size: 47mm*26mm*8mm
Antenna: 50Ω, with HAC-TH433 Spring Antenna
Weight: 22g
Operating Temperature:
-20℃~+60℃ 430.675MHz
-0℃~+60℃ 430.375MHz
Frequency stabilization:
±5PPM |
|
| Wireless interface products provide a cost effective alternative to expensive hard wired connections. The wireless product provides continuous, 24/7 communication using the FCC licenses free 900MHz frequency. Using Frequency Hopping Spread Spectrum (FHSS) technology, a robust signal is provided that is virtually free from disruption due to interference. This technology has been proven in thousands of installations worldwide. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
