|
|
E/R82 & P85: The best range of ruggedized M8 sensor for assembly lines
Robust Metal M8 sensor
Perfectly sealed IP67
Through beam (E/R 82) or Direct Sensing (P85)
Simple: No adjustment
Sensing range:
- E/R82 = 2m
- P85 = 5cm
Cable or M8 connector
|
|
|
|
|
|
VIRSENSORS is Dalmatic range of photocells for primarly the industrial door industry.The sensors come in a standard version RA/TA, a self-contain RS/TS and a safety edge self-contain RSS/TSS.
SMALL DIMENTIONS AND EXTENSIVE REACH
The combination of extremely small sensors dimensions of Ø10 L30mm and a reach of up to 25 m (TA/RA) & 12 m (TS/RS), facillitates that the sensors can be built into any machine even in locations with very poor accessibility.
INTENSITIVE TO DIRT AND DUST
A dirty/dusty environment is not normally associated with the use of photo cells. Only Ø5 mm of the sensor's Ø10 mm surface forms the light sensitive part. This lins free design creates a light sensitivity, whitch results in surface build dirt/dust being easily penetrated.
SETTING AND VIBRATIONS
In connection with installation and operation on machinery with servere vibration and over long distances the usage of optical sensors is often connected with major setting and operation difficulties. The sensor series TA10 / RA10 (to be used with controller CA-S or CA-D) and TS10 / RS10 (self-contain design) is fully sealed in order to ensure tightness (IP67) and prevent operations errors due to vibrations.
The optical design ensures controlled opening angles and thus a simplification of sensor setting even over long distances.
|
|
|
the limits imposed up to now by the miniature detectors, such as: difficult elimination of the background or cable of connection difficult to integrate in the applicatif environment, MINOS is the answer: a new series of opto-electronic detectors in versions energy reflex camera, reflex camera with elimination of the background, polarized barrier reflex camera or simple barrier. Equipped with a ultra-compact case of dimensions 8 X 10,8 X 16,2 mm resistant to the shocks and vibrations, these detectors are smallest (size) market proposing an elimination of the adjustable background. They integrate a function Teach-in statics or dynamics, either integrated, or via an external entry. The response time is lower than 0,5 ms.
|
|
EX-30 series: Threaded miniature photoelectric sensors
The EX-30 series has a radically new form developed in response to the many calls for sensors that are easier to install. This new form which fits into the mounting holes for the new M4 thru-beam type and M6 reflective type of sensors with their standard fibre sizes represents an improvement in previous design and installation techniques, so that these new sensors can be incorporated into the production line as is.
Characteristics:
Screw mounted (M4 for thru-beam type, M6 for reflective type)
Response time 0.5ms or less
Red LED
Sensitivity adjuster (Reflective type)
Bright 2-color indicator
IP67
Accessories:
Slit mask
Mounting bracket
|
|
SKE SERIES (Photocells: compact)
Description:
SKE - Transistor output with current limitation device max. 100 mA, voltage: 10÷30 V dc.
* Operating range: 0,1-4 m
* Smallest detectable object: 15 mm
* Opening angle: 5°8
* Plastic sensor with incorporated electronics
* Easy to install
* Anti-theft clamp with 12 tangency points expansion bush
* Excellent resistance without any moving even with not regular holes
* Threaded metallic protection on request
* Optional ring-nut for further mechanical protection.
|
|
FLDK 110
(Laser, sensitivity 0,2 mm)
Copy counters plastic 60 mm - counting of up to 600'000 copies/hour, standard connector M12x1, compact design, IP 54
FLDK 110
(Laser, sensitivity 1,5 mm)
Copy counters plastic 55 mm - Plug & Play, counting of up to 280'000 copies/hour, compact design, IP 54
FLDM 170
(Laser, with serial and CAN interface)
Copy counters metal 120 mm - counting of up to 3 million copies/hour, integrated copy counter, CAN interface, IP 54
FLDM 170
(Laser, with serial interface)
Copy counters metal 90 mm - counting of up to 3 million copies/hour, integrated copy counter, IP 54
|
|
The SAFAN R-Brake is Safan's latest bending cell with 100 Ton compressional force and a bending length of 3100 mm. The robot arm has a capacity of 50 kilo. The arm can be moved horizontally on a 6 m. track in front of the machine.
The SAFAN R-Brake is very compact and the machine can also be operated manually. The machine is as standard equipped with a zero table but optionally the basic model can be equipped with a vision system for the zero positioning of the sheet.
For the off-line programming Safan is offering the RoboWave programming software which enables the user to make programmes for the bending cell and make an accurate simulation. The setup times are reduced using this software. Most important is the man machine interface.
|
|
|
|
|
|
RoboCell offers mid-level automation, combining an LVD PPEB or Easy-Form® Series CNC press brake with a multi-axis Kuka robot to efficiently handle small to medium-sized components in capacities from 80 to 110 tonne bending force and 2.5 or 3.0 meter table configurations.
RoboCell increases machine throughput by automatically loading, forming and stacking finished parts in an unmanned process, providing high-precision parts, shorter cycle times and lower production costs.
All functions of the RoboCell robot and press brake are controlled through instructions from an integrated off-line programming software solution, resulting in repeatable, high-quality formed parts produced in a non-stop process.
RoboCell may be integrated with an LVD Easy-Form® press brake. In addition to the robot and press brake, RoboCell includes hardware for all part handling requirements in the automated bending process.
RoboCell is equipped with LVD’s CADMAN® Touch intuitive touch screen control system to simplify operation. Robot programs, simulation and gripper configurations are efficiently calculated offline by LVD’s CADMAN B – 3D programming software and the Kuka Sim software to ensure consistent production of accurate, high quality parts.
RoboCell can function as a fully automated system or the press brake can be operated manually via the CADMAN® Touch control. The system features a full 2.0 m of space between the robot and the press brake, and the press brake is maintained at its normal working height, facilitating standalone operation.
|
|
Press brake bending cells
The robotic bending process is the result of integrating offline programming software and robot precision.
Drawing on experience gained in systems manufacture, Rea has developed a range of sheet metal bending systems that deliver high productivity, quality production, flexibility and safety.
|
|
AUTOMATIC BENDING ROBOT CELL
ASTRO CELL it is designed to be the perfect automatic bending system. Long running scheduled automatic operations are possible, with the automatic tools layout changer, automatic handling-jig changer, automatic work-piece gripper changer, even if they are small quantity batches. Coping with different kinds of small quantity products offers a vast improvement in productivity, and shortens delivery time. The bending process times can be reduced, and an improvement in the quality can be obtained
|
|
| ... products without technical information |
| |
Robotized system for heating and positioning samples for Hopkinson benches.
Hopkinson benches are test benches for the characterization of materials under dynamic mechanical solicitations.As temperature has a key role in materials behaviour, it is therefore quite important to perform those tests at different temperatures.The system described below allows automated heating and manipulation of the tested samples, without any change in the temperature of the extremities of the Hopkinson bars, improving significantly the test conditions and providing so much more relevant results.
|
|
|
|
|
|
CELLROLL and CELLSPIN ¨C The cell cultivation system that grows with your needs
CELLROLL is a modular instrument for cell cultivation in roller bottles allowing fine tuning of rotation speed. The modular design makes a flexible production scale-up possible: depending on the needs, one motor unit can control up to eight bottle racks, each rack accommodating two standard roller bottles.
CELLSPIN is a moisture-resistant stirrer for cell cultivation in spinner bottles with volumes from 100 to 1000 ml. It offers a wide range of stirring options that can be individually programmed at any time for accurate optimisation and control of culture conditions. The spinner flasks - available in the four sizes 100 ml, 250 ml, 500 ml and 1000 ml - improve the performance of your cells thanks to their "cell-friendly" design.
The CELLROLL and CELLSPIN systems are based on a modular assembly concept that allows configuring and combining the two instruments. One control unit operates two CELLROLL drive units or two CELLSPIN stirring platforms or a combination of one instrument each. The programmable control unit is located outside of the incubator. In case of power failure or accidental disconnection of control and motor unit an alarm system is activated.
Special features:
- Modular and flexible
- Durable: non-corroding and sealed, removable control unit
- Cultivation success: gentle moving
- No heat transfer to cell suspension
- Process security and data recording
|
|
| ... products without technical information |
| |
Sartorius is more than just a supplier of products.
Working together with you, we will engineer a solution for integration of a weighing sensor (or a force sensor) into your equipment or machine.
Put us to the test – just contact us!
The overview of our range of weigh and load cells will help you narrow down your selection and give you an impression of the capabilities we can offer you.
|
|
• Weighing range up to max. 250 g
• Additive dead load up to max. 100 g
• Protection class IP 42
• Housing material aluminium
• Several interfaces available
|
|
|
Very High speed load cell interface that was especially designed for WIM application either trucks or trains. The LCIC-WIM comes with embedded application calculates "on the fly" the axle weight, axle speed and distance between axles. With 52000 samples per second high resolution A/D and powerful DSP that runs the WIM application on board, it consider to be the fastest and most intelligent Load Cell Interface that is available today in the market. The LCIC-WIM equipped with USB and RS232/485 and comes with drivers and full examples on how to communicate with the board and our monitoring package that helps to analyze the scale behavior under different speeds.
|
|
Has been designed for electronic weighing systems using strain-gage load cells. - Hopper and silos weighing - Platform scales - Batching and weighing systems - Weighing for intrinsically safe installations.
MAIN FEATURES :
- Heavy duty and small size construction
- Corner correction trimmers
- Six wire extension cable terminal board
|
|
| ... products without technical information |
| |
The development of robotics has led Matrasur Composites to widen its equipment offer, manual and automatic by integrating an internal Robotic Service in the company, completely dedicated to the design of robotic solutions.
The new generation of spray-up robots from MATRASUR Composites covers various stages of composite part production: gelcoat spray-up, resin spray-up, simultaneous spray-up of resin and fibreglass, and spray-up of demoulding agent.
Two programming technologies are available: Self learning (ROBOMAT series); the robot memorizes and reproduces the best operator’s movements endless number of times, or In-line programming based on a simulation software (ROBOSTRAT series).
|
|
The dispensing robotic cell RC500 designed and produced by mta automation ag is controlled by an industrial PC allowing the automation of dispensing operations for liquid or viscous products. This cell enables a wide range of micro-dispensing tasks to be carried out with the highest quality and repeatability.
The 3 or 4 axes can be fully programmed, as are the dispensing parameters for each dispensed point.
In order to avoid production interruptions during loading or unloading the components to be dispensed, a version with a two or four position rotary table is available.
Thanks to its modular concept, this cell can be easily integrated into existing lines or even pallet conveyors can be integrated into the cell.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
