|
|
New ultraviolet sensor identifies the presence of grease, glue, labels, wood, thread, rubber, paint, UV ink, UV crayon, and more. Confirm manufacturing processes more reliably than vision systems that cost ten times more. The UVX 300 luminescence sensor with patented technology is the clear choice because:
Unique numerical display lets you see the intensity of each reading. Now it's easy to refine processes and hysteresis.
3 to 6 times the range of any competing sensor. Won't get bumped or dirtied by target.
Only UV sensor with both auto-teach and manual calibration. Easy for low-skill operators, but able to be finely tuned.
Adjustable UV light projection and high resolution allow pin-head size detection.
Fast and convenient integration. In one sensor you get both analog and discrete output, auto-detect for PNP/NPN.
Smallest and fastest on the market.
|
|
The Luminescece Sensor detects with the receiver filter GG 420 all luminescent markings which emit light within a wavelength range from 420-750 nm. The receiver filter OG 570 suppresses especially interfering whiteners. The sensors have a very small spot, and use a UV LED with a very long service life.
Digital read-out of intensity values via the RS-232 Interface
Recognition of luminescenting marks
Teach-In, dynamic Teach-In, external Teach-In, key potentiometer
|
|
|
|
|
|
The CNTX™ combines small spot size and fast response to achieve high-speed contrast differentiation of both neutral and color targets. The sensor provides numerical display of 50 grayscale levels. The broad-spectrum light source allows accurate detection of a wide range of colors against any background. The flexibility of the CNTX™ makes it easy to set-up in a wide variety of printing, packaging and converting applications.
High color contrast sensitivity and resolution.
High detection speed, <150-microsecond discrete output response.
Broad-spectrum white LED light source allows detection of all colors.
Two gain settings and three light source intensity settings allow a wide range of adjustment capability.
Easy-to-use operator adjustable threshold.
Fast and convenient integration. In one sensor you get both analog and discrete output, auto-detect for PNP/NPN configuration.
Unique numerical display indicates measured levels making process setup easy.
Circular spot allows for any orientation of sensor to marks.
|
|
Reference: PC 929 LS
Adjustable sensing distance: 4 to 15 cm
Supply: 10 lo 30 VDC
Output: PNP ' Teach-in '
Dimensions: 12x32x20 mm
Miniaturised
Integrated amplfiei
Detection indcadcn by LED
Red pulsed viable lijht
Laser d3ss 2
Direct / inverse output
Remote leach-in
Functions lock
Dirty indicator
ABS housing
M8 plug
Applications:
Mark detection: on pack tig, on labels, on paper firm, plastu...
Sensors positioning where space is limited
|
|
SPECTRO-3-UV Series - Luminescence color sensors
High-speed color detection of fluorescent objects
In addition to brightness differentiation, the luminescence color sensors of the SPECTRO-3-UV series also perform color differentiation. Teaching of the fluorescent objects can be performed either with the SPECTRO3-Scope software, with the TEACH button that is integrated at the sensor, or through digital input INØ. The 40 kHz scanning frequency and the 30 kHz switching frequency also guarantee a reliable detection and recognition of fast-moving fluorescent marks.
|
|
Referenos: AF CLARYS 2, 3, 4
Sensing distance with plastic fibre or glass fibre: see "Plaslic Optical Fibres' or "Glass Optcal Rbres
High resolution up to 5100th mm
2, 3, 4 channels + logical output AND/OR
Modeb: output P, output N
Optional: Analogical output
Smpfe feactvin: 1 or 2 thresholds
Timer OWOFF delay: 0 to 10s
Dimensions: 99x45x325 mm
Resolution 5/100th mm with 2000 points
Applications:
Level controls: high and bw
High precision detection of movement
Presence cdetection, up to 4 units simultaneously
Up to 4 beams barrier
Mark detection
|
|
Special sensors
The detection of minimal contrast differences as well as colours or luminescent marks and materials calls for the use of special sensors. With contrast, colour and luminescence scanners from Leuze electronic, users are able to call on a highly diverse product spectrum. Depending on the application, users can select from sensors with different housing types, transmitting LEDs, outputs and teach-in functions.
|
|
|
SICK Contrast sensors detect minimum contrast levels at maximum speeds, for example print marks on foil, packaging and print products. Based on the reflection principle, they detect small differences in grey values between mark and background on matt, gloss or transparent surfaces.
|
|
|
|
|
|
These electronic devices, photoelectric sensors or photocells, use the light emission principle combined with the electronic and are made up
of an emitter or luminous source, the light rays of which are detected by a receiver. The variation in luminous signal, obtained when interrupting this ray, is converted into an electrical signal and is measured and used by
an electrical circuit. The light used is either infrared or red. By making use of this light various type of photoelectric sensors can be made. The AECO photoelectric sensors available in the FOTOSTAR range are the FT18M - FT18 -FTQ series in direct reflection, with reflector with polarized light and emitter-receiver versions. Due to their flexibility regarding the various
standard programmable versions these products offer the possibility of stocking reduction and are easily interchangeable with most of the units available on the market. They are used in the field of automation to check for the presence, counting, position control, etc., and they
are compatible with most logic programmers.
|
|
|
|
|
|
MPA – MULTIPLEXED PHOTOELECTRIC AMPLIFIER SERIES
The MPA series is a range of multi channel, multiplexed photoelectric amplifiers, which are to be used in conjunction with a relevant number of sets of remote transmitters LT and receivers LR, from the series 100, 110 and 120.
The MPA series consists of MPA 21 (2 multiplexed channels); MPA 41 (4 multiplexed channels) and MPA 81 (8 multiplexed channels). Each channel operates independently of each other with their own set of remote transmitter and receiver. The multiplexing function ensures that optical cross talk between channels is prevented. The series offers a choice between individual relays or individual NPN/PNP transistor outputs, with or without an adjustable 0-3 sec on/off time delay.
This amplifier series offers manual sensitivity adjustment for each individual channel via integral potentiometers located on the front panel of the amplifier. Light or dark function and long or short range are switch selectable for each individual channel.
|
|
The Fiber Optic pH Sensor system consists of a fiber optic probe designed to hold immobilized colorimetric indicator dye materials, plus a light source, spectrometer and OOISensors Software. You can supply your own indicator material, or select from our line of transparent or reflective films. Calibration involves recording spectra in high and low pH samples, and in at least one pH standard such as a NIST-traceable buffer.
|
|
Photoelectric sensor Y series with M18 threaded front mounting
The Y series is offered with seven different models. Thru-beam, Diffuse, Retroreflective,
Transparent object detection, Convergent Beam (close and regular) and BGS.
There is a model for use in almost any application.
|
|
|
From infrared to laser technology, from fibre optics to integrated microprocessors – a highly developed sensor technology ensures reliable solutions for even the most demanding applications. For short ranges, under extreme environmental conditions, with tiny objects or for long distances – the sensors offer high technical efficiency as well as simple handling from installation to commissioning.
|
|
Color is one of the essential features of a product that has to be “just right“.
A reliable method of checking and controlling the color of a
product is needed. But when is a color “just right“ and who is the judge? Ultimately, it is the consumer or product user who passes judgment on the quality of a color.
Human color perception determines whether the color is right or not. Given this fact, product manufacturers have been eager to find a way to accurately simulate the “visual impression“ of the human eye in industrial color control.
The A. KRÜSS Optronic perceptive color sensor CS8 “recognizes“
color just like humans do, which means it possesses the same spectral sensitivity.
Thus the sensor “perceives“ different shades of color in the same manner as the human eye. This feature is what sets the KCS8 apart from other color sensor systems, as the KCS8 can mimic the human eye when determining the right color.
|
|
Verify the presence of targets that can be differentiated by color, faster and with greater control. A ColorMax-1000™ color sensor lets your machine see up to 15 colors and RGB intensity. What's more, innovative technology improves sensitivity and speed, so you can maximize the pace of manufacturing.
Recognizes 15 colors. Use fewer sensors. No need to reprogram when you change setups.
Traditional color sensors output only a "match/no match" condition, but the ColorMax™-1000 also outputs the analog values for each RGB reading. Now machines and operators can see not just which color, but how much color - enabling tighter control.
2 to 5 times faster sample speed - for fast manufacturing.
The only color sensor in an M30 package.
Highest resolution and repeatability specs in the industry.
Sophisticated algorithms ignore luster
PC-based configuration; lock out unauthorized changes
|
|
Optex FA Digital Fiber sensor D2RF series
- Digital display for easy setup and easy monitoring
- Two independent output with
- High speed 60 micro second response.
- Cross talk prevention up to 4 units
- APC Function (Auto Power Control):
The APC function ensures precise sensing even when there are changes in the temperature or environmental conditions.
|
|
Optex FA Fiber Sensor BRF series
· 4 models: Standard, High Speed, Mark Detection and Moisture Detection.
· Unique "Moisture Sensing Type" BIF-W series senses the presence of water and moisture in a product.
· High Speed type (50 micro sec) and Green
LED type for Mark Sensing.
- Cross talk prevention, IP66 protection
- 10 turn potentiometer for easy and fine adjustment
|
|
· Long sensing distance - 40 meters thru-beam by V3/V4 series.
· Long sensing distance - max. 100 meters thru-beam by D series.
|
|
· M8 pig-tail connector types are available for all models.
· Easily visible indicator LED can be seen even from the back.
· Convergent beam models offer a choice of
3 different sensing distances.
(3-8mm / 2-15mm / 5-30mm)
· Rugged mechanical structure provides protection against vibration.
|
|
|
|
|
|
In assembly and handling technology, object verification systems are an integral part in assembly monitoring. The 100% testing of shape or position before, during or after the individual assembly steps prevents complex and cost-intensive re-working or reject of material or workpieces. With a size of only 42 x 42 x 43.5 mm the efector dualis contour sensor takes us to a new dimension and can solve applications where mounting space is at a premium. Furthermore, the industrially compatible mounting and wiring technology enables easy and time-saving integration into the system.
The operating software
Functionality and processing power are integrated in the efector dualis contour sensor enabling various options. For communication and parameter setting a USB adapter cable is used for the connection to the PC/laptop and with the operating software "efector dualis Control Panel" settings can be made and stored in the sensor. This professional software is menu-guided and is distinguished by its ease of use and user-friendliness. A new contour is set in the sensor in just 6 operating steps – easy to use.
|
|
· High grade PSD (Position Sensing Device) is implemented in FGS (Foreground Suppression) system.
· Ideal for sensing thin objects lying on conveyor, etc.
· Numerical display for easier settings.
|
|
Cost effective photoelectric sensor Z2 series
Thru-beam type: Z2T-2000 25m long sensing distance
Diffuse reflective type: Z2D-80 100cm sensing distance
Retro-reflective type: Z2R-400 4.4m sensing distance
Features:
IP67 rated protection
Low power consumption 13mA typ.
Compact size 31 * 20 * 11 mm with standard pitch 25.4mm mounting hole
|
|
Photoelectric sensors
Pepperl+Fuchs offers a wide range of photoelectric sensors, fiber optic cables, & accessories. We have the photoelectric sensors you need to keep your applications running. Pepperl+Fuchs with the brand VISOLUX is an innovator of photoelectric sensing technologies. For precise, optical control of positioning, sorting, and counting processes and for custom non-standard applications, look to Pepperl+Fuchs to have the answers for every industry.
|
|
Photoelectric Proximity Switches SIMATIC PXO
Fast and Accurate Sensing with Light and Laser
Pure optical acumen - this characterizes our extremely precise, fast and pin-point accurate optical proximity switches. Superior configuration convenience via teach-in or potentiometer and the easiest operational handling are added benefits. With the most varied shapes – from cubical, cylindrical to miniature designs and models, e.g. reflective light scanners with or without background suppression, reflective light or thru-beam sensors, you can confidently master any task with a transmission range up to 50 m.
|
|
· Digital Amplifier with Modular Laser Optics.
· Two independent outputs, high speed response up to 60 µsec.
· Max 70 meter sensing distance (Retro-reflective mode) with co-axial beam light source.
· e-con connector for easy disconnection.
|
|
The CMYX combines small spot size and fast response to achieve high-speed mark detection capable of detecting standard one-track PHARMA-CODE (0.5mm thin bar width) at 2000ft/min. The CMYX is perfect for printing or packaging applications that require the ability to differentiate between background and color marks during high-speed operation. The CMYX provides the accuracy and precision for reliable process control.
High color contrast sensitivity and resolution.
High detection speed, 25-microsecond discrete output response.
Broad-spectrum white LED light source allows detection of all colors.
Calibration feature allows manual user sensitivity adjustment.
Remote teach input allows for automatic adjustment to background.
Unique numerical display indicates measured levels making process setup easy.
Circular spot allows for any orientation of sensor to marks.
|
|
MTCSiCS in LCC8 packaging
JENCOLOUR product family / True Colour Sensoren
The MTCS true colour sensor, based on the standard spectral value function CIE 1931 (DIN5033), makes it possible to measure colours in the three-range method, in accordance with DIN 5033.
- Detection/ measurement of colours more accurately and much faster than human eye
- low dark current
- Signal input frequencies >100 kHz
- RoHS compliant
- Values display as XYZ
- Calibration in system L*a*b
Typical Applications:
- Conceptual formulation from the colour and white metrics
- Low-cost colour measurement
- Colorimeter (measurement and calibration e.g. display screen)
- Illuminate regulation (video projector and RPTV)
- LED test
- Control of coloured light sources
|
|
|
|
|
|
FT 50C – A new ray of light in colour detection
With the FT 50 C colour sensor, SensoPart has set another milestone in the technical development of colour sensor technology: the first colour sensor with only one light source in the small standard size, which guarantees the precise detection of objects in the whole working area. And which shows many other technical features that make it capable of a top performance as a standard. The exceptional quality of the FT 50 C is its operational principle with only one light source.The LED emits visible white light. At a large distance range, objects are detected by a patented optical system independently of their shape. The colour to be detected is learned simply by teach-in and the FT 50 C is at once ready for use. It compares the target object with the taught-in reference colour and if they match, it sets one of the three available switching outputs.
Field-proven applications
The FT 50 colour sensor simplifies and speeds up sorting and control tasks within a broad spectrum of automated working processes. Whether it is the distinction of the degrees of browning of cookies in the food industry, the positioning of register marks on packings in the pharmaceutic industry or any other detection task: the FT 50 C is the right sensor whenever all the others have had enough of it.
FT 50 C- 3 Colour sensor
Generates a rectangular light spot of 1 mm by 5 mm. Designed for the detection of oblong objects.Typical applications: checking the presence and correct order of stranded conductors in a flat cable.
|
|
The color sensors of SI-COLO Series operate according to the 3-color-range principle, with a white-light LED as a light source.
Except of the sensors of SI-COLO1 series, the color sensors can be parameterized under Windows® through the serial RS232 interface.
|
|
|
|
|
|
Color is one of the last qualities still being checked by human eyes in most applications. Color sensors such as the CS24D are changing this. Electronic color sensors are increasingly being used in automated applications to reduce automation errors and improve quality at production line speeds.
Delta's color sensors and sorters are based on our patented pulsed LED technology and offer the benefits of rugged, long-life, solid-state lighting with a wide range of colors from blue to near-infrared.
While most color sensors use a single white LED and filtered detectors, Delta's color sensors are different. They use multiple ultra-high intensity LEDs for smooth, bright lighting and unfiltered large-area precision photodiodes for better signal-to-noise ratio. And the resulting large sensing areas provide superior performance on textured materials.
Be confident the color you want is traveling down your production line. Delta's color sensors provide superior performance in a wide variety of applications, even with textured and other difficult materials.
|
|
|
|