|
|
IR-BLOC Ambient Light Sensors
The IR-BLOC family is the only ambient light sensor family in the market that comes in a low-cost package with the IR-blocking feature fully incorporated in a plastic epoxy package. The spectral response is similar to the human eye and a photocell, making it ideal for applications where the response should only be influenced by visible light.
Features and Benefits of the NEW IR-BLOC Family
- Visible light response with IR-blocking feature incorporated into cast epoxy
- RoHS compliant, cadmium-free alternative to photocells
- Low dark current
- Linear current output over illumination
Applications
- Illumination
- Street light switching
- Interior and exterior light control
- (dusk/dawn switch)
- Automotive headlight dimmer
- Contrast control
- Colorimeters
- Oil burner flame monitoring
|
|
Model KR865 consists of an Infra Red LED and a light modulation type of Photo IC, and has one piece seamless plastic housing. As a series, Shinkoh Electronics can provide KR866, KR895, KR1207 having function of light modulation and KR864, KR894 having Direct Current function.
Feature
1.Long detecting distance(7-25mm by 90% reflective paper)
2.Dust protection housing
3.Light modulation
Application
1.Paper detection in OA equipments
2.Coin/Object detection in Vending machines and banking machine
3.Other industrial instruments
|
|
|
These new Contrinex sensors are characterized by their remarkably small size, Ø 4 mm smooth or M5, with a housing length of 35 mm. Protruding by 1.8 mm, the spherical sapphire lens projects a cylindrical light beam with a diameter < 4 mm, permitting recessed mounting. Despite their small size, they are fully self-contained, thus making an additional evaluation device superfluous. As a result, the sensors are less costly and easier to install than optical fibers with amplifiers. In addition, they replace larger switches where mounting space is limited. The devices are short-circuit proof and operate in a voltage range of 10 ... 30 VDC, and with an output current of up to 100 mA. They are moreover fully vacuum potted and, as a result, largely insensitive to environmental influences (degree of protection Ip 67).
|
|
Ambient Light Sensor
The AMIS-74980x is a wide dynamic range light sensor with an analog or digital output. There are several versions of the analog output; one with 1uA current output at 1000lux all the way to 1mA at 1000lux. The digital output version has a built-in 16-bit ADC with a 2-wire SMBus or I²C digital interface. The sensor employs AMI Semiconductor's proprietary CMOS image sensing technology which provides low noise and high dynamic range output signals and a light response similar to the response of the human eye.
|
|
Silicon based components are supplying electricity when placed under light. So, they can be used as optical sensors, to measure the light intensity in the visible and near IR range.
The short-circuit current of a silicon photodiode is directly proportional to the light intensity.
- Luxmeters and PAR sensors (Photsynthetically Active Radiation) : with amorphous silicon photodiodes which spectral response is a 350 - 750nm (or 400nm-750nm)
AGRONOMY, PHOTOMETRY, POSITION DETECTION, TWILIGHT SWITCHING...
- Solar radiation sensors : with crystalline silicon photodiodes which spectral response is 400 - 1100 nm METEOROLOGY, PHOTOVOLTAIC SYSTEMS CONTROL, AGRICULTURAL CONTROL UNITS...
|
|
|
Seeing is believing: OSRAM Opto Semiconductors' new Ambient Light Sensor SFH 5711 detects brightness in the same way as the human eye. Designed for a wide range of applications, it can be used in situations where systems and equipment need to adjust to ambient light conditions as perceived by the human eye. The SFH 5711 is the latest addition to our Ambient Light Sensor product line.
|
|
FEATURES
1. Built-in optical filter for spectral response similar to that of the human
eye.
Peak sensitivity wavelength is 580 nm
2. Photocurrent is proportional to illumination. (linear output)
High photocurrent is achieved by built-in photocurrent amp.
IL = 260 µA (typical)
Ev = 100 lx (florescent light)
3. Uses environmentally friendly silicon chips.
4. Lead-free.
5. Operates on 1.5 to 6 V DC, which is suitable for battery operation.
6. Compact, SMD package
TYPICAL APPLICATIONS
1. Brightness detection for LCD backlight control for LCD devices (mobile phones, LCD TVs, car navigation systems, mobile PCs, and PDAs).
2. Brightness detection for circuits in household lighting, crime prevention
lighting, and automatic lighting for bicycle.
3. Brightness detection for controlling the keypad backlight in mobile phones.
4. Brightness detection for surveillance cameras (night switching).
|
|
| ... products without technical information |
| |
Biochrom WPA S1200 Scanning Visible Spectrophotometer
Easy to use, visible scanning spectrophotometer ideal for QC and routine use in industrial, biotech and
educational laboratories.
- Measures Absorbance, %Transmission, Absorbance ratio and concentration and kinetics in the range 330nm-800nm
- Easy to use with large graphical display
- Stores up to 99 methods
- Use standard 10mm cuvettes or 10,12 and 16mm test tubes
- Connect to PC or chart recorder to capture, print, interpret or export results to Excel
- Heated cell holder version available for measurements at 37°C (S1200T)
A compact, lightweight and robust spectrophotometer ideal for general laboratory use.
|
|
Biochrom Libra S6 Scanning Visible Spectrophotometer
Easy to use, visible scanning spectrophotometer ideal for QC and routine use in industrial, biotech and
educational laboratories.
- Measures Absorbance, %Transmission, Absorbance ratio and concentration and kinetics in the range 330nm-800nm
- Stores up to 99 methods and has a large, backlit graphical display
- Connect to PC or chart recorder
- Easily cleaned and decontaminated
- Includes Grafico PC software to export results to Excel.
- Heated cell holder version available for measurements at 37°C (Libra S6H)
Optional Accessories
Venturi action funnel flow cell.
Serial printer and serial printer cable.
Test tube adapters (10, 12, 16mm).
Chart recorder interface cable.
|
|
Biochrom Libra S21 Spectrophotometer
High performance compact “workhorses” for the analytical laboratory. Ideal in a multiuser, multi-application laboratory and for users who require IQ/OQ validation.
- Long life Xenon source with reference beam compensation
- Covers wavelength range 325-1100nm. 5nm band width
- "Press To Read" technology extends lamp life
- On-board software for standard and life science applications plus method storage.
- Built in self test diagnostics for GLP instrument performance validation.
- 8 position sample changer as standard.
Optional Accessories
- Full PC control with Acquire and Acquire 21 CFR software.
- Printer
- Wide range of sample accessories including temperature contol, cell changers, tube adaptors and automatic sipper.
|
|
Biochrom WPA S800 Visible Spectrophotometer
The S800 visible diode array spectrophotometer is ideal for education and QC laboratories.
- Measures Absorbance, %Transmission, Absorbance ratio and concentration plus kinetics in the range 330nm-800nm.
- Very easy to use with large graphical display
- Use with standard 10mm cuvettes or 10,12 and 16mm test tubes
- Educational experiments and UV/Visible tutorial
- Connect to PC or chart recorder to capture, print, interpret or export results to Excel
- Educational tutorial and starter pack of cuvettes included
A compact, lightweight and robust visible spectrophotometer ideal for simple applications for general laboratory use and education.
|
|
Biochrom Libra S4 Visible Spectrophotometer
Visible spectrophotometer ideal for education or QC laboratories.
- Measures Absorbance, % Transmission, Concentration and Rate in the range 330nm-800nm.
- Tungsten light source and Diode array optics 7nm bandwidth
- Connect to a PC or chart recorder.
- Use Grafico PC software (included) to capture, print, interpret and export results to Excel.
- Easy to use with a large graphical display.
- Suitable for use with standard 10mm cuvettes or 10,12 and 16mm test tubes.
- UV/Vis educational tutorial and starter pack of cuvettes included
Optional Accessories
Venturi action funnel flow cell.
Serial printer and serial printer cable.
Test tube adapters (10, 12, 16mm).
Chart recorder interface cable.
|
|
Biochrom Libra S11 Visible Spectrophotometer
Ideal for quality control in analytical or industrial laboratories where a high specification instrument and a wide choice of accessories are required.
- 325-999 nm wavelength range. 5 nm Bandwidth
- Single beam instrument with Tungsten source with lamp saver mode.
- Basic routines (Absorbance, %Transmission, Concentration & Ratio) plus scanning, kinetics and standard curve capabilities.
- Store methods
- Automatic system calibration
- Customize both the start-up menu and the accessible methods.
- Output directly to printer, or full PC control with optional Acquire Lite software.
Optional Accessories
- Wide range of sample accessories including temperature contol, cell changers, tube adaptors and automatic sipper.
- Thermal printer
- Acquire Lite applications software
|
|
|
|
|
|
The Aquanova environmental spectrophotometer and test kits offer the simplest and most convenient laboratory system for measuring a broad range of parameters in water, wastewater, effluent and environmental samples. Although targeted to water and environmental analysis the Aquanova can also be used as a standard single beam visible spectrophotometer by selecting the photometric mode.
The Aquanova covers a wavelength range from 320 to 1000nm with a spectral bandwidth of 8nm. A calibration curve using up to six standards can be created in the concentration measurement mode. This model comes pre-loaded with Jenway test kit methods and is compatible with most commercially available photometrics test kits.
Jenway also manufacture a range of visible and UV/visible spectrophotometers in both single, split and double beam formats. A variety of sampling accessories can be fitted to all ranges including sipper pumps, automatic and manual multi-cell changers, peltier temperature control, test tube holders, long cell holders and many more...
|
|
|
Ideal electronic siren for applications sets fire to in industrial environments, factories, building sites, workshops, large laboratories, rooms of production... Range YODALARM profits from a modern and pleasant design. ASSETS: Conform to standards EN54-3 and NFS 32.001 Choices of 32 sounds of which AFNOR NFS 32.001 Selection by switches DIL Possibilité of programming 2 different sounds automatic Synchronization Faible electricity consumption: approximately 20mA high noise Level: 110 dB with 1 meter Fire flash 5 Joules Case in nonpropagating ABS of flames continuous Ratio duty easy Installation Connection by connector blocks 2 entries of cable M20 Characteristics: - 110 dB - IP 54 or 65 - Vcc/Vca - 32 sounds - 1 kg - T°: - 25°C/+ 55°C Several colors is available, to consult us
|
|
|
|
|
|
Design experts honour Flash Multi-tone Sounder with red dot award
In one of the most fiercely contested international design competitions, the red dot design award, WERMA Signaltechnik’s Flash Multi-tone Sounder 444 was selected for an “honourable mention”. The award winning signal device clearly stood out from the mass of 3,200 products from over 49 countries submitted to the competition.
Attractive Flash Multi-tone Sounder 444
With its honourable mention, the distinguished jury panel honours products that excel thanks to their highly successful design solutions. The award winning flash multi-tone sounder 444 is user friendly and visually appealing.
Diagonal lines and round forms conjure a slim appearance which harmoniously blends into the environment. It is equipped with a horn that merges seamlessly into the light window, enabling the LED double flash to propagate to the maximum. At the same time the siren generates a formidable sound output for its size of 114 dB.
Robust material, energy-saving LEDs and optimised production techniques make the flash multi-tone sounder a maintenance-free and environmentally friendly product. Thanks to its signal strength, it is especially suited for use on machines, buildings or fire alarm systems.
|
|
Sonos Sounder (AC)
A general purpose AC electronic sounder for fire, security and industrial applications.
- Dual Voltage 110V AC or 230V AC
- Smooth flow cabling for faster installation
- Up to 106 dB (A) @ 1 metre
- No locking screw required
- Weatherproof to IP65 (deep base units)
- Synchronised alarm tones
|
|
* 120,000 hr. LED light sources
* PLC compatible
* DeviceNet models available
* 3 visual LED signals in one compact housing
* Two stack capability for a fourth signal
* Multi-tone base module option
* Multiple LED clusters in red, green and amber or red, blue and amber
* Molded-in gasketed lens modules for dust tight reliability
* Vibration resistant heavy duty industrial design
* Mounting flange and 4", 10" and 15" mounting pipes available
|
|
Motion triggers audio warning and flashing lights.
- Adjustable motion detector
- Six pre-programmed audio warning messages
- Adjustable volume
- Controls concealed or underside
- Fits onto Rubbermaid Safey Cones
- Recordable 12 second custom message
- Flashing light
|
|
| ... products without technical information |
| |
|
|
|
|
VCC's LPC Series 4mm Litepipe® is designed for use with both vertical and horizontal surface mount LEDs where the Litepipe® is attached directly to the display panel. Combining the physical attachment advantage with the fact that the Litepipe® is available in eighty-one lengths, the designer now has complete freedom in the positioning of the circuit board within the chassis. These features allow for easy board insertion in final assembly or removal for inspection and repair.
The display lens design of the Litepipe® is low-profile with Fresnel rings. The Litepipe® lens will disperse the light up to 160°. The light receiving end of the Litepipe® has a concave surface designed to be positioned in front of the horizontal surface mounted LED or directly over the top of the vertical surface mounted LED. This concave surface maximizes the gathering of the LED light output, increasing the efficiency of the Litepipe® display. The Litepipe® mixes and blends the LED multi-colors into a single color as the light passes through the uniquely designed Litepipe® surfaces.
|
|
Features
- WIDE VIEWING ANGLE.
- DESIGNED TO REPLACE RECTANGULAR
- RIGHT ANGLE THROUGH HOLE DEVICE.
- HIGH TRANSMISSIVITY PLOYCARBONATE MATERIAL.
- UL94V-0 COMPLIANCE.
- RoHS COMPLIANT.
|
|
| ... products without technical information |
| |
STAHL CraneSystems developed the innovative small crane technology KT 2000 as early as 1984. This high-quality modular system is specially designed for the S.W.L. range up to 2,000 kg.
With a single rail size, overhead monorails, suspension and overhead travelling cranes can be assembled individually and economically. Straight and curved sections and crossovers, switch points and turntables are assembled with plug and bolt elements and can thus be modified if necessary to suit new, individual production requirements.
STAHL CraneSystems's LCS small crane system has been on the market since 2004. Constructed as a simple modular system for plug and bolt assembly, it is designed for the S.W.L. range up to 1,500 kg or 2,000 kg.
|
|
The Eurosystem overhead handling system can be perfectly adapted to your work-site layout or production line and offers a variety of possible configurations.
Eurosystem offers a wide range of possibilities: monorail system, runway, single-girder overhead crane, double-girder overhead crane, single or multiple track systems with changes of direction.
|
|
|
It makes it possible to empty one or more pits, to manage one or more products in a surface of storage, and to supply one or more hoppers in a completely automatic way. Current flows until 100 m3 per hour.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
