|
|
|
|
|
|
Theta Probe - High Performance ARXPS Spectrometer
Thermo's Theta Probe combines advanced monochromator and lens and detector technology to provide rapid, precise analysis. With the revolutionary ARXPS capability to provide angular data simultaneously without tilting the sample
Product Detail
High-performance XPS, Small Area XPS (SAXPS) and Unique Angle Resolved XPS (ARXPS) capabilitySmall Area XPS with the Microfocus Monochromator for maximum sensitivity Sample Alignment is fast and accurate using the advanced optical system Elemental and chemical state mapping of surface features 70mm x 70mm sample stage for high throughput and sample thicknesses up to 25mm Automation for unattended operation Avantage Windows NT based data system
The Theta Probe instrument combine advanced monochromator, lens and detector technology with the Avantage data system (Windows NT) to provide rapid, precise analysis.
Developed from the highly successful Sigma Probe, Theta Probe's revolutionary ARXPS capability provides angular data simultaneously collected without tilting the sample.
|
|
|
|
|
|
Overview
The Quantera, PHI's second generation Scanning X-ray Microprobe provides the sensitivity and tools needed to apply XPS surface analysis to a broader range of current and future product development and failure analysis needs. High performance micro-area spectroscopy, XPS depth profiling, automated insulator analysis, and robotic sample handling define a new generation of XPS surface analysis equipment for today's laboratory.
Important features of the Quantera SXM include:
- Patented scanning x-ray microprobe design with <9um diameter minimum x-ray beam size
- Complete XPS capabilities (spectroscopy, depth profiling, mapping, etc.) at all x-ray beam sizes
- Highest performance XPS instrument for thin film depth profiling
- Optional C60 sputter ion gun for organic / polymer depth profiling
- Automated effortless analysis of electrically insulating samples
- Accurate quantitative analysis
- Robotic sample handling
- A completely automated, easy to use instrument platform
Micro area spectroscopy and high performance thin film analysis capabilities open new areas of application for XPS surface analysis in all environments. The complete automation of the system makes it easy to use and increases the reproducibility of routine measurements. Large sample platens make it possible to analyze “real world” large samples or multiple small samples automatically. A new generation of XPS surface analysis instruments are available today from PHI.
|
|
|
The JPS-9200 is a newly developed X-ray Photoelectron Spectrometer system used for micro-area surface analysis of a broad range of samples. The new hemispherical electron analyzer incorporates a combination of an electrostatic accelerating lens and magnetic field lens to improve sensitivity 20 times that of previous models. Both monochromatic and non-monochromatic x-ray sources are provided as standard. The minimum x-ray spot size is 30 microns. The ability to map very large areas (50mm x 18mm) is achieved with stage mapping. Using the Total Reflected XPS (TRXPS) mode backgrounds are significantly reduced thus improving the minimum detectability limit. The sample stage provides full automation for smooth and precise positioning.
|
|
|
|
|
|
The NanoESCA offers up to 10 times better XPS image resolution, faster acquisition times, small spot spectroscopy with excellent energy resolution, and overview images with 100 times better resolution than presently commercially available instrumentation. For its revolutionary design the NanoESCA received the 2007 R&D 100 award (www.rdmag.com).
Significant technical development often requires thinking out of the box. Lateral resolution of conventional technologies for imaging XPS, be it scanning an x-ray beam or using magnetic lenses, has been stuck for many years at sub 10 µm. It was all too apparent that tweaking these technologies would not be sufficient to reach the resolution required for nanotechnology. This barrier is breached by the new, patent-protected (EP 1559126 US 7,250,599) NanoESCA. The design includes a non-magnetic, electrostatic PEEM lens and a double-pass hemispherical analyser. Rapid PEEM survey imaging (< 50 nm resolution) can be used to locate features, whilst its lateral resolution in imaging ESCA of 650 nm in the laboratory and 150 nm at the Synchrotron are simply unique.
|
|
A lot of electrical , pneumatic, or battery powered models .
* Diameter of blades till 50mm to 120mm
* Light models to cut only one sheet or heavier one to cut a layer
* Also 3 phases 400v models (to set up into an automatic bigger machine)
|
|
Rewinding, inspection and cutting machine for rolls of all kinds of fabrics (decorating textiles, fabrics for clothing industry, knitted fabrics).
Used by wholesalers for rewinding decorating textiles, upholstery, clothing and other technical fabrics.
* Maximum roll diameter 40 cm (other dimensions on request)
* Flexible and modular concept.
* One person operation
* Tilted 45° Inspection table with back lighting
* Accurate length measurement system
* Winding up station with adjustable speed control
* Power supply 230V, 50/60Hz, 1 kW
|
|
Low-cost rewinding and cutting machine for rolls of fabrics.
Used by wholesalers.
# Fabric width up to 1800mm
# Maximum roll diameter 300mm
# One person operation
# Optiona accurate length measurement system with digital readout
# Varispeed rewinding system
# Machine dimensions 2100x 1000x 950
# Power supply 230V, 50/60Hz, 0.3kW
|
|
UNROLLER CRADLE 528 BT
Unroller cradle to set on the table top.
Can be placed everywhere on the table top
Accept every width because open on each side
Win time without bar and cone
Standard width 1m800; possible width till 3m50
optional frame with wheels.
|
|
Semi automatic advance of the layer
* Cut is automated
* Equipped with a press guide on each side of the blade
* Advance of the layer is preset and repetitive
* Useful width 530, 810 or 1050mm
* Useful height 60 or 90mm
|
|
Manual cutting table.
* Manual cutting tables to cut made to measure awnings, screens and roller blinds very accurate and square.
* The cutting tables are built to customer's demands and can be provided with lots of options such as back lighting, end stop system with digital read out, edge control, etc.
* There are three different cutting systems available; rotating knife, ultrasonic cutting for a sealed finish and crush cutting.
* The tables are built up to a maximum cutting width of 500 cm
|
|
Strip cutting machine to cut and rewind every kind or matérials.
* Two models with different cutting technology according to the material
* Ever HSS blade + counter blade, or 2 auto sharpening tools in contact
* Adjustable running speed
|
|
Used by wholesalers for rewinding decorating textiles, upholstery, clothing and other technical fabrics.
* Maximum roll diameter 40 cm (other dimensions on request)
* Flexible and modular concept.
* One person operation
* Inspection table with back lighting
* Accurate length measurement system
* Winding up station with adjustable speed control
* Power supply 230V, 50/60Hz, 1 kW
*Several options are available as loop control device and special equipment for tensionless inspection.
|
|
SQUARE CUTTER
With the end cutting1850 ESCA device you can save time, fabrics, and work easily ...
MANUAL END CUTTING DEVICE :guiding rail, long handle, manual lift up
SEMI AUTOMATIC SQARE CUTTING MACHINE :guiding rail, control box, automatic stroke, manual lift up
FULLY AUTOMATIC END CUTTER :guiding rail, control box, automatic stroke, automatic pneumatic lift up
Cutting head equipped with a 110mm HSS blade
Stroke available from 1m800 till 4m00
|
|
CURTAINS CUTTING MACHINE
Used by wholesalers, textile companies and curtain manufacturers.
Useful width 3m500
Pull, measure and cut at programmed lenght
Rear craddle for the main roll
An inspection table top with optional back lighting screen
A digital progammable counter
A round knife cutting machine guided in a rail
Each sheet fall down into a bag in front of the machine
4 heavy wheels to move the machine
|
|
Ultrasonic cutting equipment.
* Cutting equipment to build in an existing cutting table is also available such as an electric cutting knife with guiding profile.
* Ultrasonic equipment built in an aluminium guiding profile provided with a clamping device, ultrasonic handpens to cut out shapes on a glassplate.
|
|
Semi automatic advance of the layer
* Cut is automated
* Equipped with a press guide on each side of the blade
* Advance of the layer is preset and repetitive
* Useful width 530, 810 or 1050mm
* Useful height 60 or 90mm
|
|
PULLING AND CUTTING TABLE TO PREPARE FORMATS OF COVER
Cutting table conceived to unwind, tow, measure covers and similar fabrics
A single operator is able to work on a 4 metrers width product
Programm for lenght required and automatic stop
Several tools can be placed to cut width size when running
The machine tows the product from a rotary stacker per example and puts it on the ground or re-rolls up it on front side according to option.
A pneumatic powered cutteris guided in a rail to cut square at lenght progammed
|
|
STRONG PNEUMATIC ROUND KNIVE CUTTING MACHINE
Whith blade Ø 86mm and carbide tip counter blade
Designed to cut - Heavy materials till 20mm thickness
- Composite products, mat and fiber glass....
Can be used in explosive athmosphere
Easily available on every working spots
|
|
Ultrasonic cutting equipment.
* Cutting equipment to build in an existing cutting table is also available such as an electric cutting knife with guiding profile.
* Ultrasonic equipment built in an aluminium guiding profile provided with a clamping device, ultrasonic handpens to cut out shapes on a glassplate.
|
|
CUTTING TABLE FOR LAYING UP MACHINE
Robust frame, table top abrasion resistant.
Conceived to receive laying up machines
Square tubular frames 40 x40mm
Jack of adjustment under each foot
Table top in SODIPAN thickness 25mm
Options:Storage level , Block drawer
Also available: Movable table to move the laying up machine
DESIGNER'S TABLE
For the creators, designers...
Square tubular frame 30 X 30mm
Jack of levelling under each foot
Painted gray anthracite color
Laminated white table top thickness 19 mm
Removable tender coating for pricking of bugs or pins
Block drawer included
Dimensions: 1500 X 3000/1500 X 1500/
1200 X 2500/1200X 1250 (others on request)
Option: Floor of storage
Many possibilities for your style design offices
|
|
PULLING AND CUTTING TABLE TO PREPARE FORMATS OF COVER
Cutting table conceived to unwind, tow, measure covers and similar fabrics
A single operator is able to work on a 4 metrers width product
Programm for lenght required and automatic stop
Several tools can be placed to cut width size when running
The machine tows the product from a rotary stacker per example and puts it on the ground or re-rolls up it on front side according to option.
A pneumatic powered cutteris guided in a rail to cut square at lenght progammed
|
|
STRONG PNEUMATIC ROUND KNIVE CUTTING MACHINE
Whith blade Ø 86mm and carbide tip counter blade
Designed to cut - Heavy materials till 20mm thickness
- Composite products, mat and fiber glass....
Can be used in explosive athmosphere
Easily available on every working spots
|
|
Rewinding, inspection and cutting machine for rolls of all kinds of fabrics (decorating textiles, fabrics for clothing industry, knitted fabrics).
Used by wholesalers for rewinding decorating textiles, upholstery, clothing and other technical fabrics.
* Maximum roll diameter 40 cm (other dimensions on request)
* Flexible and modular concept.
* One person operation
* Tilted 45° Inspection table with back lighting
* Accurate length measurement system
* Winding up station with adjustable speed control
* Power supply 230V, 50/60Hz, 1 kW
|
|
Low-cost rewinding and cutting machine for rolls of fabrics.
Used by wholesalers.
# Fabric width up to 1800mm
# Maximum roll diameter 300mm
# One person operation
# Optiona accurate length measurement system with digital readout
# Varispeed rewinding system
# Machine dimensions 2100x 1000x 950
# Power supply 230V, 50/60Hz, 0.3kW
|
|
Used by wholesalers for rewinding decorating textiles, upholstery, clothing and other technical fabrics.
* Maximum roll diameter 40 cm (other dimensions on request)
* Flexible and modular concept.
* One person operation
* Inspection table with back lighting
* Accurate length measurement system
* Winding up station with adjustable speed control
* Power supply 230V, 50/60Hz, 1 kW
*Several options are available as loop control device and special equipment for tensionless inspection.
|
|
HOT CUTTING SCISSORS
Hot cutting scissors are able to cut perfectly synthetic ribbons.
For a welded cut
Adjustable temperature 0 till 250° in accordance to the material
|
|
STYROFOAM-CUTTTERS
A complet range of tools with a lot of blades in many sizes and special profils blades .
Styrofoams-cutters
|
|
CUTTING TABLE FOR LAYING UP MACHINE
Robust frame, table top abrasion resistant.
Conceived to receive laying up machines
Square tubular frames 40 x40mm
Jack of adjustment under each foot
Table top in SODIPAN thickness 25mm
Options:Storage level , Block drawer
Also available: Movable table to move the laying up machine
DESIGNER'S TABLE
For the creators, designers...
Square tubular frame 30 X 30mm
Jack of levelling under each foot
Painted gray anthracite color
Laminated white table top thickness 19 mm
Removable tender coating for pricking of bugs or pins
Block drawer included
Dimensions: 1500 X 3000/1500 X 1500/
1200 X 2500/1200X 1250 (others on request)
Option: Floor of storage
Many possibilities for your style design offices
|
|
To spread alone one or some sheets of fabrics.
* Unwinder equipped with free rools
* Pneumatic clamping device on the whole width
* Manual carriage translation on the table top
* Pneumatic clamp above the cutting rail
* Automatic cutting sqare device
* Complete cutting table with guiding rails
|
|
Cut easily every fabrics, PVC, coated matérials, foamed products....
* 2 speed motor équipped with brake for a quick safety stop of the rotating blade
* Safety telescopic protection around the blade
* 2 models 740mm from blade to frame
* 1240mm from blade to frame
|
|
|
|
see the results for the following category : 
