|
|
Biochrom WPA CO8000 Biowave Personal Cell Density Meter
Rapid, low cost cell density measurement, anytime, anywhere
- Simple
- Reliable
- Portable
The CO 8000 is an easy-to-use instrument to measure the density of cells in suspension (i.e. yeast cells and bacterial cultures) by measuring Absorbance(OD) at 600nm.
Completely portable, this hand-held instrument has a rechargeable battery so it can be used in incubation cabinets, under anaerobic conditions, or in fume hoods and safety cabinets.
- LED Light Source for stable results and no maintenance.
- No warm up time.
- Saves last 99 results for download to PC or Printer.
- Accepts 10mm cuvettes, or 16mm tubes (Ehlenmeyer side-arm flasks).
- Adapters available for 10mm and 12mm tubes.
- Optional printer
- Easy to clean.
The CO8000 gives a lifetime of stable and repeatable results for a very affordable price!
|
|
|
|
|
|
WTW has developed a new line of field instruments based on optical measurement offering the following capabilities:
• pHotoFlex: photometry, pH
• pHotoFlex Turb: photometry, pH, turbidity
• Turb 430 IR and Turb 430 T: turbidity
The instruments have been designed to extract the optimum performance from the latest generation optics optics with state-of-the-art LED technology.
Remarkable features include:
• Low power consumption
• Robust
• Display-driven user interface
• Waterproof
• Integrated smart cuvette adapter for 16 and 28 mm cuvettes
• Hand held
The exceptional versatility of the pHotoFlex, pHotoFlex Turb and Turb 430 makes them ideal for use in process control, water analysis, and the beverage industry.
Both pHotoFlex and pHotoFlex Turb are equipped with a pH function, measuring the full pH range from –2.00 to 16.00. The pH measurement is simplicity itself, offering automatic temperature compensation and auto buffer recognition.
For turbidity measurement the Turb 430 IR offers a large range from 0-1100 NT/FNU. Outstanding features include: Automatic 3-point calibration, GLP compliant data export via RS 232, calibration record and the setting of a calibration interval.
|
|
|
The user can designate up to 4 choices of wavelength at 350nm-1100nm of visible rays, thus it is being used in various fields such as chemistry, environment(water quality, air, soil), food, bioassay for residual pesticides, etc. In case of bioassay for residual pesticides to measure the inhibition level of residual pesticides or water analysis to measure the COO, TN, and TP levels of water, faster and more convenient measurement is possible with commercial test reagent
|
|
POCKET Colorimeter II
More than 30 flexible, single parameter instruments
- Easy operation
- Small enough for almost any pocket
- Reliable results without a mains connection
- Rugged construction yet lightweight
DR 800 series—compact colorimeters
The DR 800 models are preprogrammed for different numbersof tests:
– DR 820: 20 tests
– DR 850: 50 tests
– DR 890: 90 tests
All three DR 800s work best in combination with the practical HACH tests for reliable, fast results in wastewater, drinking water and process water analysis.
|
|
Features:
1. The 2.4" width colorful screen and portable design
2. Three kinds of light sources for selection,SCI and SCE mode switch and metamerism analysis for different working status
3. Tolerance setting, humanizational auto-judge color difference values and color deviation for judging the color easily
4. Professional color analysis software for doing the color data analysis and color difference diagrammatic outputting
5. The optical mini printer fulfil the output of data
|
|
The system CIELAB Color Checker PR0086 is an on-line color-measuring system, adjusted to an high absolute color accuracy.
A color adjustment by means of an absolute calibrated reference spectrometer is carried out in factory.
The absolute accuracy in average is ~1.6 dE. The relative accuracy also between the systems is less than +/-0.5 dE.
|
|
|
|
|
|
More powerful and more versatile than ever from the famous Chroma-Meter series
The new Chroma-Meter CR-400 supersedes the internationally recognised and acclaimed series CR-100, CR-200 and CR-300. It offers a huge number of added value features and improved versatility, while fully maintaining all optical properties and therefore, guaranties full data compatibility with the previous series. The CR-400, with its 8mm measuring area is suitable for measuring reflected colour and colour difference in a wide range of industrial fields. It is able to meet the needs of various applications, from all sorts of ingredients, foods, raw materials and finished products to pharmaceuticals and dermatological applications - the CR-400 handles all!
The main improvements focus on enhanced usability and functionality such as the re-designed Data Processor, featuring a large back light display for numerical or graphic display of measurement data and a built in thermal high speed printer. The data memory can now store up to 100 target colours and 1000 measurements. Several new colour spaces and Pass/Fail formulas as well as indices for whiteness and yellowness enhance the usage into various fields of applications. The new "user indices" function allows the input of up to six different user or application specific equations using XYZ, Yxy or CIELAB values. Furthermore, the communication languages can be set for English, German, French, Italian, Spanish and Japanese.
|
|
PM100-G - Fiber Optic Power Meter
Simple optical power and loss measurement
PM100-S - Fiber Optic Power Meter
Simple optical power and loss measurement
PM200 - Fiber Optic Power Meter
Link certification and reporting tool
FO600 - FiberMeter Optical Power Meter
FO610 - High Power FiberMeter Optical Power Meter
Ideal for testing and certifying in both Multimode and Single Mode applications
|
|
Ideal for link qualification, the FiberBasix 500 series comprises the ELS-500 Light Source and the EPM-500 Power Meter. These instruments come with pass/fail thresholds (LED indicator) and a memory capacity of 1000 data items.
Applications
Link-loss characterization (ELS-500 Light Source)
LAN/WAN certification (ELS-500 Light Source)
Link-loss characterization and LAN/WAN certification (EPM-500 Power Meter)
Key Features and Benefits
Error-free testing features: automatic wavelength recognition, and no offset nulling required
Data transfer to a PC via USB connection
One-touch storage of results for all wavelengths at once (on the EPM-500)
Complete reporting software
|
|
|
The OP510 was specifically designed for applications where cost effective solutions for measuring, monitoring and logging of insertion loss or power fluctuations are needed. The OP510 is a small (4"x2"x1.25") desk friendly module designed such that minimal movement and bending of the reference- and test cables is necessary. This results in stable, accurate and repeatable measurements.
|
|
Two FasTesT ports: a three-wavelength singlemode port, including either 1625 nm or 1490 nm, and an optional two-wavelength multimode port, for a total of up to five wavelengths
Visual IL and ORL pass/fail analysis
Compatible with both the FTB-400 and FTB-200 platforms
FTTx ready: allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs
Three-year warranty and recommended calibration interval, error-free testing and minimized training time
|
|
|
Luna Technologies' Optical Backscatter Reflectometer (OBR) delivers unprecedented inspection and diagnostic capabilities for the fiber-optics industry. Luna's state-of-the-art OBR provides isolation of faults and problems well before final test, saving hours in rework and hard dollars in yield loss.
|
|
|
Insertion Loss and Return Loss measurement for all four FTTX wavelengths. The 'no mandrel' method combined with concurrent dual-wavelength measurement makes this instrument the most efficient tool in FTTX component verification.
|
|
KLG/KLH MultiClean
Welded enclosure, oil-proof, with large maintenance doors. Models available with one stage (KLG model), and up to four stages, with filter-element clamp for the main filter (KLH model). The filter levels are configured vertically (one above the other).
Special features:
- Models available for up to 0.5 bar overpressure or sub-atmospheric pressure
- Use as last-chance filter with a Pred of 1 bar
- MultiCase filter mounting system can be used
- Can be washed out
- Grid dimensions: 610 / 610
- Equipment installed can be later changed (retrofitted)
- Surface is powder-coat finished; stainless steel also possible
- Snap-on, permanently elastic door gaskets
- Fittings for draining liquids
Application:
Oil and emulsion-mist extraction; dust extraction of medium-level concentrations (e.g., in pharmaceutical and chemical industries; with last-chance filter behind the dust filter, etc.)
|
|
Series RVE 400 – 3200
Type of construction vertical, single-stage
Volume flow rate of waste air 500 – 50’000 m3 / h
Ø of columns 400 – 3200 mm
Heights 2500 – 9000 mm
Volume flow rate of washing medium 2 – 110 m3 / h
|
|
| ... products without technical information |
| |
Company COMPAUT offers a broad range of rules and meters of quality.
The majority of this whole of visualization can be delivered in 24:00
Among these rules, many models are perfectly compatible, as well mechanically as electrically, with the principal standards of the market.
You can thus come to replace those which you usually use, without same having to change the connectors, the whole for a price without comparison.
In addition, company COMPAUT points out that it carries out in its workshops the repair of the meters and the rules, some is the mark, and this within very short times.
N’ thus do not hesitate to entrust to us your defective products for a free estimate.
|
|
Testing of Electricity Metering equipment, takes many different forms. Apart from accuracy and stability, meters must also be tested against interference conducted on the elctricity cables. This can be in the form of impulses generated by lightning events, switching action in the mains network or insulation breakdown. EMC PARTNER specializes in designing test equipment to meet the international standards for impulse testing of energy meters. IEC61036 and IEC62052 are typical standards for class 1 and 2 metering equipment.
EMC PARTNER testers are compact systems with several impulse types in one unit. The necessary personnel protection is provided by safety interlocked test cabinets.
|
|
983v2 - Static Locator
The Model 983v2 Static Locator provides accurate measurement of electrostatic charges. Its design enables fast response, low drift and ease of operation. The 983v2 can operate in “Continuous” or “Peak Hold” mode to record changes in the level of charge or the highest charge detected respectively. The Model 983v2 is suitable for use by production, maintenance, inspection and quality engineers and on any material where static charge may be an issue.
Technical Characteristics
Measurement range -200kV to 200kV at a distance of 150mm
Accuracy +/-5% of full scale deflection
Dimensions 145mm x 80mm x 25mm (H x W x D)
Weight 200g
Battery 2 x AA alkaline
Battery life Approximately 10 hours of continuous use
Construction Moulded plastic case, integral battery compartment, external earth connection
|
|
|
Product quality, output and yield of manufacturing processes can be improved considerably when problems related to static electricity are identified and dealt with effectively. Electrostatic fieldmeters are appropriate measuring tools to simply identify static electricity problems.
|
|
|
|
|
|
The B&K Precision model 2640 is a battery operated, hand-held RF Field Strength Meter capable of measuring RF levels and electric field strength. The synthesizer-based design provides you with reliable measurements across a wide reception range of 100 kHz to 2000 MHz, a remarkably low noise floor of -110 dBm to detect weak signals and basic spectrum analyzer functionality. The 2640 provides field technicians and engineers with a cost-effective measurement tool for basic signal investigations at only a fraction of the cost of a full-featured conventional spectrum analyzer.
The B&K Precision 2640 supports RS 232C serial communication and includes software that can control the instrument from a personal computer. The user can save the instrument’s measurement data on the PC for further analysis.
The handheld RF Field Strength Analyzer is an ideal tool for field testing, installing and maintaining Mobile Telecommunications systems such as Cellular and Cordless Phone, CB Paging, Paging, Cable and Satellite TV Systems as well as performing antenna site measurements and maintenance.
# Features Battery-operated portability
# 100 kHz to 2 GHz measurement range with a maximum display span of 400MHz
# Hand-held and battery operated portability
# Built-in 2 GHz frequency counter
# Detects wide band (180kHz) and narrow band FM (12.5kHz) , AM & SSB (2.4kHz) signals
# Phase-locked loop for precise frequency tuning
# Audio output of the detected signal with built-in speaker
# Detachable antenna included
# Back-lit display
# Storable setups and displays
# RS-232 Interface
|
|
SF 156 Static Meter
Analysis of static problems are very hard without measurement of static charge. A decent static meter supplies the possibility of analysis of the problem to the technician. Static meter displays where and how the static current is generated and its polarization and amplitude.
If a static charge preventer is needed in the problem, static meter determines the best position for static charge preventer and displays its performance. Static meter develops standards for technician for avoiding future problems. These standards varies from the current level of regions which are ordered from produced or sent to user.
|
|
Electromagnetic Interference (EMI) is the disruption caused by an electromagnetic field. EMI can cause equipment lock-up, sensor parametric errors, undesirable process variations, erratic response, software errors, and even component damage.
|
|
|
|
|
|
The Narda Broadband Field Meter NBM-550 has been designed to measure electromagnetic field strengths in the vicinity of transmitters and industrial equipment, and to evaluate and record the results in the context of human safety standards. Particular attention has been paid to ease of use. The instrument can be operated with one hand by anyone – left-handed or right-handed. The probes are isotropic, i.e. equally sensitive in all directions, so users do not need to worry about the direction the radiation is coming from.
The result data memory holds up to 5000 results along with date and time information. A GPS receiver (option) plugged into the basic unit and connected via USB gives the NBM the capability to store position data for each measurement. Instead of handwritten notes, voice comments can also be recorded. All the data can be uploaded to a PC and managed using the PC software supplied with the instrument. Measurement reports are therefore very easy to generate.
The basic unit and the probes are separately calibrated at the factory. The probe calibration data are stored in an EPROM in the probe itself. The NMB basic unit retrieves this automatically via the intelligent probe interface, and takes it into account in the results.
|
|
|
|
|
|
ALMEMO® 2490-1L compact measuring instrument with more than 65 measuring ranges, with just one input, with memory for 100 measured values
ALMEMO® 2490-2L with 2 measuring inputs
Universal measuring instrument with 1 or 2 ALMEMO® input sockets, 8 channels, 4 internal function channels (e.g. differential values)
Memory sufficient for 100 measured values, can be called up and viewed in the display
High-resolution A/D converter, 16-bit, 10 mops
More than 65 standard measuring ranges
Support for ALMEMO® connectors with multi-point calibration, special linearization, and special measuring ranges
Generously dimensioned 2-row static 7 / 16 segment display including units
Easy and convenient to operate by means of 7 keys
Measuring functions : Measured value, zero-setting, sensor adjustment, saving of maximum / minimum values, memory for 100 measured values, cold junction compensation, and temperature compensation
Test functions : Segment monitoring, range monitoring, sensor breakage indication, battery voltage check and display
|
|
|
|
|
|
Model DXR-2000
The Digital Transformer Ratiometer is a lightweight instrument for the precise determination of transformer ratios, polarity, and excitation current.
It is designed for testing distribution transformers at flux densities low enough that the impedance drop resulting from exciting current may be ignored. Accordingly, the voltage ratio obtained will be a precise measure of turns ratio.
Digital Transformer Ratiometer Features
- An important tool for preventive maintenance, transformer production testing and commissioning on all electrical transformers.
- Built-in vector matrix for 3 phase testing - an important feature for diagnostic work
- Accuracy ± 0.05%.
- Measures ratio, polarity and excitation current
- Ratios 2000:1 In 4 ranges
- Direct digital readout of ratio and excitation current
- Electronic ratio calculation
- Portable in sturdy fiberglass case
The ultra precision potential measuring and ratio calculation provides a five digit readout with ± 0.05% accuracy.
Polarity indicator signals relative phasing at all times, while the LCD digital ammeter warns of saturation or shorted turns.
The 3-phase vector switch pack incorporates a convenient push-button switching arrangement which enables the operator to hook up the test lead harness to all terminals of a three-phase transformer in one operation, then proceed to test all phases on every tap setting without interruption or change of leads on terminals. The operator has full control over the test to select or short phases.
Zig-zag transformers, or transformers without an accessible neutral connection, can also be tested with no external shorting.
|
|
|
The electric charges accumulated on the surface of materials generate disturbances in the manufacturing processes. Static electricity is, indeed, the cause of multiple parasitic phenomena which can reduce the production paces or degrade the quality of the end product. It is important to be able to quantify these loads with all the stages of manufacture. The electrostatic field intensity measuring device ELCOWA standard MCE 20 allows a measurement without contact with your product. This measuring instrument is essential for the control of the good performance of your anti-static installation.
|
|
An advanced, easy-to-use hand-held electrostatic Field Meter.
FEATURES:
- Small, lightweight design for easy transportation and storage
- Integrated hand grips for positive control of meter
- Intermittent audio beeping and flashing LED light informs user that the meter is at the proper measuring distance from the surface
- Memory feature allows user to store and retrieve up to 20 readings
- Low-battery indicator light notifies user when batteries need to be replaced
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
