|
|
Biochrom WPA CO8000 Biowave Personal Cell Density Meter
Rapid, low cost cell density measurement, anytime, anywhere
- Simple
- Reliable
- Portable
The CO 8000 is an easy-to-use instrument to measure the density of cells in suspension (i.e. yeast cells and bacterial cultures) by measuring Absorbance(OD) at 600nm.
Completely portable, this hand-held instrument has a rechargeable battery so it can be used in incubation cabinets, under anaerobic conditions, or in fume hoods and safety cabinets.
- LED Light Source for stable results and no maintenance.
- No warm up time.
- Saves last 99 results for download to PC or Printer.
- Accepts 10mm cuvettes, or 16mm tubes (Ehlenmeyer side-arm flasks).
- Adapters available for 10mm and 12mm tubes.
- Optional printer
- Easy to clean.
The CO8000 gives a lifetime of stable and repeatable results for a very affordable price!
|
|
|
|
|
|
WTW has developed a new line of field instruments based on optical measurement offering the following capabilities:
• pHotoFlex: photometry, pH
• pHotoFlex Turb: photometry, pH, turbidity
• Turb 430 IR and Turb 430 T: turbidity
The instruments have been designed to extract the optimum performance from the latest generation optics optics with state-of-the-art LED technology.
Remarkable features include:
• Low power consumption
• Robust
• Display-driven user interface
• Waterproof
• Integrated smart cuvette adapter for 16 and 28 mm cuvettes
• Hand held
The exceptional versatility of the pHotoFlex, pHotoFlex Turb and Turb 430 makes them ideal for use in process control, water analysis, and the beverage industry.
Both pHotoFlex and pHotoFlex Turb are equipped with a pH function, measuring the full pH range from –2.00 to 16.00. The pH measurement is simplicity itself, offering automatic temperature compensation and auto buffer recognition.
For turbidity measurement the Turb 430 IR offers a large range from 0-1100 NT/FNU. Outstanding features include: Automatic 3-point calibration, GLP compliant data export via RS 232, calibration record and the setting of a calibration interval.
|
|
|
The user can designate up to 4 choices of wavelength at 350nm-1100nm of visible rays, thus it is being used in various fields such as chemistry, environment(water quality, air, soil), food, bioassay for residual pesticides, etc. In case of bioassay for residual pesticides to measure the inhibition level of residual pesticides or water analysis to measure the COO, TN, and TP levels of water, faster and more convenient measurement is possible with commercial test reagent
|
|
POCKET Colorimeter II
More than 30 flexible, single parameter instruments
- Easy operation
- Small enough for almost any pocket
- Reliable results without a mains connection
- Rugged construction yet lightweight
DR 800 series—compact colorimeters
The DR 800 models are preprogrammed for different numbersof tests:
– DR 820: 20 tests
– DR 850: 50 tests
– DR 890: 90 tests
All three DR 800s work best in combination with the practical HACH tests for reliable, fast results in wastewater, drinking water and process water analysis.
|
|
Features:
1. The 2.4" width colorful screen and portable design
2. Three kinds of light sources for selection,SCI and SCE mode switch and metamerism analysis for different working status
3. Tolerance setting, humanizational auto-judge color difference values and color deviation for judging the color easily
4. Professional color analysis software for doing the color data analysis and color difference diagrammatic outputting
5. The optical mini printer fulfil the output of data
|
|
The system CIELAB Color Checker PR0086 is an on-line color-measuring system, adjusted to an high absolute color accuracy.
A color adjustment by means of an absolute calibrated reference spectrometer is carried out in factory.
The absolute accuracy in average is ~1.6 dE. The relative accuracy also between the systems is less than +/-0.5 dE.
|
|
|
|
|
|
More powerful and more versatile than ever from the famous Chroma-Meter series
The new Chroma-Meter CR-400 supersedes the internationally recognised and acclaimed series CR-100, CR-200 and CR-300. It offers a huge number of added value features and improved versatility, while fully maintaining all optical properties and therefore, guaranties full data compatibility with the previous series. The CR-400, with its 8mm measuring area is suitable for measuring reflected colour and colour difference in a wide range of industrial fields. It is able to meet the needs of various applications, from all sorts of ingredients, foods, raw materials and finished products to pharmaceuticals and dermatological applications - the CR-400 handles all!
The main improvements focus on enhanced usability and functionality such as the re-designed Data Processor, featuring a large back light display for numerical or graphic display of measurement data and a built in thermal high speed printer. The data memory can now store up to 100 target colours and 1000 measurements. Several new colour spaces and Pass/Fail formulas as well as indices for whiteness and yellowness enhance the usage into various fields of applications. The new "user indices" function allows the input of up to six different user or application specific equations using XYZ, Yxy or CIELAB values. Furthermore, the communication languages can be set for English, German, French, Italian, Spanish and Japanese.
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
| ... products without technical information |
| |
Full plastic Pnematic Pumps for transfer and suitable for all fluids, even the most corrosive. The parts in contact with the liquid are fluoropolymers (PTFE / PFA). This range is ideal when used in the distribution and packaging of products highly corrosive and aggressive (type HCL, HF, SOCl2; TFA, Slurry, PIC, ...). Similarly, these pumps are particularly suited for applications requiring a low level of particulate and ionic contamination (pharmaceutical contamination measures, dosages of rennet in the manufacture of cheese, ...) Distribution of 1 to 100l/mn; Determination until to 10l/mn.
Availaible in 2 versions :
PPS: pneumatically operated
PPSE: Electro pneumatically operated
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
|
|
|
|
Specially designed for filling of all liquid and semi-liquid cosmetics (shampoo, conditioner, hair-dye, shower gel, bubble bath, liquid soap, milk, suntan milk, lotions, deodorant, roll-on, perfumes, etc), FLEXO is extremely easy to use thanks to mass flowmeters linked to a servodrive for the up/down motion of the nozzles.
The benefits are significant :
- excellent adaptation to all types of liquid
- simple, in-line filling system with no moving mechanical parts
- bottom-up filling of the bottles with variable up/down speed of the nozzles and programmable according to the shape and contour of the bottles to be filled
- increased speeds thanks to the continuous injection filling system (no pump suction cycle)
- optimized dosing accuracy
- standard cleaning in place (CIP) and standard sterilization in place (SIP)
- programmable cleaning speed according to the products (quality of the cleaning is optimized and the cleaning times reduced)
- option of installing 2 filling circuits in parallel, with cleaning in place (CIP) for one circuit while the 2nd circuit is filling and vice versa
- quick format changeovers without tools
- stainless steel guards with "balcony" design for optimized prophylaxis.
PKB deliberately chose standard mass flowmeters instead of electromagnetic flowmeters to avoid the issue of certain non-conductive products and the constraints of very precise pressure regulation in the feeder tank.
|
|
|
This WOLFANGEL® unit was conceived for the vacuum infusion process, where, at the beginning of the process, a great amount of material is required. The capacity is 50 kg/min. Resin, catalyst and accelerator (or inhibitor) are delivered by 3 material pumps. The particular advantage of this plant is that it can process preaccelerated resin. The reaction process of the resin system can be adjusted to an optimum to the temperatures of the environment so that the possibilities of adjustment are improved compared to a preaccelerated system. This concept can also be used for epoxy dosing units.
|
|
Technical Data:
-Steel frame, zink plated
-Rollers
-Balancer
-Mixing block
-Pneumatic control
-Stainless steel piston pump
-Swivel boom made out of stainless steel
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
KOFLOC MFC-Gas Mixer (8500)
The KOFLOC MFC-Gas Mixer (8500) integrates 3 KOFLOC Gas Mass Flow Controller MODEL 8500 SERIES and a gas mixer in one convenient package. The result is a compact device that not only saves space and avoids clattering, but a unit with superior performance than a conventional system of separate mass flow controllers, a gas mixer and piping. The KOFLOC MFC-Gas Mixer (8500) is especially suited for burn control applications by greatly reducing flame flickering and stabilizing burn better than conventional setup.
FEATURES
- High-lift actuator for large flows
- Single 24 VDC power source
- Choice of RS232C or RS485 interface
- Standard totalizer function
- 14-bit converter for 4-1/2-digit display and operation
- Isolated thermal sensor for measuring inflammable gases
- Choice of SUS316L or SUS316 stainless steel
- Standard dimensions and fittings for easy replacement
- Free mounting position
- SV setting, plus 5 pattern settings
- Auto-zero function
- Wide selection of fittings, seals, wetted materials and communication interfaces
- Easy maintenance
APPLICATIONS
♦ Gas mixing
♦ Burn control
|
|
Gas Mixers
WITT gas mixers are available as mechanical or electronic systems for different types of gases, capacity ranges and areas of application. The gas mixtures produced are either variable or pre-set. For local or remote monitoring and control extensive sensor technology and electronics are available. Gas mixers are also supplied with integrated analysers. WITT are happy to design and build equipment to meet special requirements.
|
|
HOLSTER BAGS
Practical in every detail.
Made-to-measure openings for easy access to controls, keypads or connectors.
Belt holsters can be rotated on the belt and can be removed quickly when required.
Ideal for small data entry devices. Also available in washable material.
|
|
Model: 24MP
Diameters: 3 to 23 mm
Max lenght: 9999.9 m
Cable guidance: 360º
Reset: Push button
Weight: 536 g
Measuring of cables, pipes, rods ... etc.
Manual handle grip.
Clamp subjection.
Ropes measuring, model: 24MPK
|
|
EMGZ 306A Series
The EMGZ 306A Series is a single channel analogue tension measuring amplifier. There can be two force sensors connected. All settings are done with 20-turn trimmers which are easily accessible from the front. The amplifier outputs are
standardized ± 10 V tension output and 0…20 mA or 4…20 mA current output (switchable by jumpers).
For filtering of the output signals capacitors can be added. As options 10 VDC sensor supply voltage and compound-filled versions with additional vibration protection are available. The compound-filled version is used for rotating applications such as stranding machines, etc.
EMGZ 306A.CAL
This version provides a pushbutton to simulate 50% of the nominal sensor
load. This allows to do the calibration of the amplifier by calculation instead
of physical simulation of the tension. www.fms-technology.com
|
|
|
SIM-Small Instrumentation Modules-is a compact test and measurement platform for a wide range of applications. Unlike other modular systems, SIM offers complete front-panel as well as remote operation, allowing you to choose between manual and computer control. Up to eight instruments share the same mainframe which provides power, clock synchronization, communications, and module status. For additional versatility, you can cascade mainframes or other RS-232 instruments, and even operate modules outside the mainframe.
|
|
8201 Modulation Analyzer
The Model 8201 provides precision modulation and audio analysis in a single, easy-to-operate package. Measures AM, FM, PM, carrier and audio frequencies, SINAD, distortion and carrier level.
• Carrier frequency range: 100 kHz to 2.5 GHz
• 0 to 500 kHz FM deviation to 1% accuracy
• 0 to 99% AM to 1% accuracy
• 0 to 500 radians to 3% accuracy
• Audio distortion range 0.01% to 100% THD or 0 to 80 dB SINAD
• GPIB
|
|
|
|
see the results for the following category : 
