|
|
The starting materials for HYDRA® corrugated hoses are either seamless or longitudinally welded, thin-walled tubes in which corrugations are formed mechanically or hydraulically using special tools.
Corrugated hoses are absolutely leak-tight and are employed to convey pressurised liquids and gases or as vacuum lines. Corrugated hoses are also employed as inexpensive, flexible connecting elements, as filling hoses, to absorb movements, thermal expansions or vibrations.
Corrugated hoses lined with PTFE are used especially with particularly aggressive media.
|
|
|
Hose assemblies are custom made for each application according to size, pressure rating, temperature, configuration, and length. Hose fittings are available in stainless steel, aluminum, titanium, and nickel-based alloy materials.
|
|
|
Theses hoses are designed mostly to transport crude oil or refined petroleum products with some handling extreme cold weather flexibility. Others are used for despensing from drums or storage tanks and can be used with bio-diesel fuels.
|
|
Under Floor Central Heating Systems
Polyplumb offers three configurations of under floor central heating suitable for new build, retrofit, or any type of construction. All are compatible with standard central heating boilers and are especially suitable for use with condensing boilers which give maximum efficiency at low output levels.
|
|
|
Polyethylene is the most commonly used tubing due to its flexibility, wide range of chemical resistance and lower cost. Nycoil uses high quality Linear Low Density Polyethylene material (LLDPE) that conforms to Food and Drug Administration 21 CFR 177.1520 C where contact with food is an issue (applies to all colors). LLDPE has a much higher resistance to stress cracking as compared to other Polyethylene compounds. It is also chemically inert, meaning it forms a good barrier against moisture, vapors and gases - minimizing the possibility of leaks or contamination. Where prolonged exposure to sunlight or ultraviolet (UV) light is a concern, black tubing is recommended for extended life.
|
|
Developed for the low-temperature range
CALPEX® is a flexible, self-compensating, continuous and heat-insulated pipe system with a medium pipe made of cross-linked polyethylene.
No underground connections
CALPEX® district heating pipes can be supplied in rings of up to 807 m in one piece, depending on the dimensions. This largely eliminates underground connection points.
Area of application:
Heat supply pipes, drinking water transportation, drainage/waste water systems, cooling plants, swimming bath technology and agricultural applications are just a few examples from our extensive list of references.
|
|
Flexiline
Ptfe lined metalic flexible houses with
or without braid: smooth, convoluted,
corrugated and antistatic.
|
|
Features :
Application ==> Medium pressure applications with hydraulic fluids at high temperatures and with aggressive media for the chemical industry, surface technology, 2 component systems
Inner layer ==> PTFE
Insert ==> one stainless steel braided insert
Outer layer ==> none
Colour ==> metallic
Min. temperature - 70 °C Max. temperature + 260 °C
|
|
Properties:
Application ==> general application for air, water etc.
Inner layer ==> Soft PVC
Insert ==> none
Outer layer ==> Soft PVC
Colour ==> clear
Min. temperature - 20 °C Max. temperature + 60 °C
Special features without textile insert and Hardness: approx. 77° Shore A Media : *Air
*Water
|
|
Technical Description
The new generation of highly flexible RECTUS hoses consists of a textile-reinforced, 3-ply PVC hose with a smooth inner tube, polyester thread insert and abrasion-proof outer covering.
Advantages
Low weight, very high flexibility, highly resistant, high resistance to pressure, UV-resistant, long service life, shock and tread-resistant, non-buckling, manufacturer‘s imprint with technical specifications.
Technical Data
Working temperature:
-25°C up to +60°C
Maximum operating pressure:
at +23°C: 15 bar
Bursting pressure:at +23°C: 63 bar
Color: light blue
|
|
Description:
HP HOSE are reinforced silicone tubes with visible advantages in comparison to other tubes: longer service life and possibility to visually follow every phase of the productive process. They do not bend and this allows continuous flow.
|
|
FLEXIBLE HOSES
METAL FLEXIBLE HOSES, made with AISI 321or AISI 316L, with or without external braid and with connections according to performances, materials and specifications of customers, from ND 6 up to ND 200.
RUBBER FLEXIBLE HOSES made with various mixtures with or without braid.
PTFE FLEXIBLE HOSES corrugated or smooth with different coupling under specific requirements
|
|
Niro-Flex hoses are additionally equipped with a stainless steel neeting to protect them from mechanical outside influences
The hoses are even of the stainless steel netting very flexible and have an external diameter of 50mm and inner diameter of 8mm. They are constructed to work at temperatures up to 200°C and are pressure resistant up to 200bar.
|
|
|
All food and beverage hoses are made to required FDA standards. Hoses are stocked for liquids, oils and abrasives and are available in PVC and applicable rubber compounds.
|
|
Recommended for:
Use on hot and cold water high-pressure cleaning equipment where heavy-duty service is required. Suited for agricultural, sports, valet and maintenance service applications. Grey and blue PowerWash are suitable for use in hospitals, swimming pools and other applications where hygiene is of the utmost importance. Not recommended for steam service.
Couplings: MegaCrimp®.
|
|
|
Crush proof nylon coil black reinforced hose for max temperature of 180 ° C. Suitable for fitting on reels and for duct or floor mounted systems. Strongly recommended for its great flexibility, lightness and resistance.
|
|
|
|
|
|
HIGH QUALITY – HIGH PERFORMANCE
Tests results have shown that the optimum contact surface material currently available for the dispense of beer is nylon. Guided by this principal, Valpar has developed a range of multi-layer nylon lined tubes to meet the needs of the world’s leading breweries. The original Brewmaster® tube was developed in close co-operation with some of the world’s leading breweries in search of the ultimate beer tube. The Valpar Brewmaster® range has been further developed to suit a variety of specific requirements and applications.
Features
• Ultra-smooth nylon inner layer
• Low gas permeability
• Highly flexible compared to solid nylon tubes
• Highly engineered for consistent quality tubing
• Superb adhesion between all layers with high resistance to delamination
Benefits
• Reduced bacterial growth and yeast adhesion so that the taste and quality of your beer is maintained
• Extended cleaning cycles or improved and easier cleaning – this saves money and improves beer quality
• Improved carbonation levels of dispensed product
• Suitable for tight bend radius applications
• Compatible with a wide range of fittings
|
|
|
|
|
|
Chemical hoses from ContiTech cover the whole spectrum of standard hoses for the chemical and pharmaceutical industries in accordance with EN 12115.
Special processes - some of them patented - provide for safe transport of various media. This includes both hoses with elastomer inner linings as well as plastic-clad ones.
New innovations include hoses with light-colored plastic lining. With their integrated conductor helix, the hoses comply with all requirements for a Ω hose as contained in EN 12115 while at the same time guaranteeing product purity.
Process-patented petrol pump hoses from ContiTech do not bleed colors and are conductive, extremely lightweight, flexible, buckle-proof and weather-resistant. They can be rolled up, have an extremely smooth, bright-colored finish and guaranteed calibratable volume increase. The compounds used allow for good resistance to swelling and diffusion. The "hose-in-hose" principle provides for automatic gas recirculation - and thus contributes actively to protecting the environment and human health.
|
|
Tube: Synthetic rubber blended, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: special synthetic rubber blended, black or red, weather and ozone resistant
Application: for fire fighting vehicles or use on hose reels for fixed installations.
Temperature: -30℃～+80℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
IIR tubing for water
Very high gas and air impermeability ;
Very good dialectical properties and excellent resistance at UV radiations.
In compliance with FDA (177.2600-21) for food and water;
Temperature: -30°C~ +120°C
Length: as request( Up to 200m/roll)
Packing: Plastic bag, carton, Pallet
|
|
Tube: black NBR/PVC, smooth, oil resistant
Reinforcement: textile braided high tensile synthetic yarn
Cover: black and smooth NBR rubber, oil, ozone, weather, abrasion resistant
Application: in fuel system like gasoline, diesel fuel, also suitable for loading and unloading tank cars, automobiles, oil refine plants and oil related industries, etc.
Temperature: -40℃～+100℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
Fuel Hoses and Hose Lines
We develop and produce complete line systems from the tank through to the engine. Our systems comply are cost-efficient and easy-to-install. Our special competence is the manufacture of tight connections between hoses, pipes and fittings and the assemblies to which these are hooked up. Safe and reliable parts are the result. Our product range includes supply and return lines and ventilation lines.
The Product Range Covers
- supply and return lines
- ventilation hoses and
- tank fillers
|
|
Single line or twin line available
Tube: EPDM/SBR (NR/SBR) blended, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: EPDM/SBR (NR/SBR) blended, Red, Blue, Green. smooth weather and ozone, abrasion resistant
Application: for conveying welding gases
Temperature: -40℃～+90℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
The water cleaning hose range is dedicated to hobby and professional water cleaning machines, with cold and hot water (not suitable for vapour steam applications).
It is designed according to safety norm IEC-2 with safety factor burst/working pressure 4:1.
The water blasting hose range is designed with criteria of maximum robustness and easy handling, complete with adedicated fitting solution, in consideration of safety and performance aspects connected with blasting applications.
Safety factor burst/working pressure is 2,5:1, it complies with international specifications (AS/NZ 4233.2, RMA-USA, ISO7751, BFPA-UK, prEN1829-2).
|
|
|
|
|
|
HIGH PRESSURE THERMO-HEATED HOSES
PREO high pressure thermo heated hose range is composed from several models (STANDARD, HIGH TEMPERATURE, SPRAY, WATER PROOF, SPECIAL) and either standards length according to Customer’s request ensuring accuracy and reliability for any type of application.An electric heating element, which controls the glue temperature inside the hose, screws around the pipe formed by a 8 mm diameter Teflon hose reinforced with a stainless steel sheath which can resist high pressures. The element is PTFE insulated, covered and screened with a glass fiber band and equipped with an earth wire and the temperature detecting probe. Finally a thick silicon foamed sheath guarantees a perfect thermal insulation, while a polyester anti wear cover increases the whole endurance to heat, impact and abrasions. The foam covering holds both the wiring for gun heating and powering and the 24 Volts supply to the electro valve. The solid housing of the hose end are hydraulically connected to the console and to the gun by two nipples, the electrical connection gets through fast external plugging.
|
|
|
That range of products is intented for more technical industrial applications (exhaust of fumes, smokes, gas, dust, powder, bore ships, grass, leaves)
|
|
Industrial hoses and accessories
ERIKS is the leading European innovative hose supplier. ERIKS offers a high quality range of hoses, couplings and expansion bellows and also supplies related technical services.
Sales program
* rubber hoses
* plastic hoses
* metal hoses
* PTFE hoses
* composite hoses
* compensators
* hose couplings
* threaded- and flange couplings
* dry-break and quick couplings
Accessories
* hose reels
* hose bun
* hose clamps
Specials
* hoses safe to use in Ex-zones (ATEX)
* animal derived ingredients - free hoses
* full - ohm hoses
Production and added value
* application know-how for all branches of the industry
* specific custom made solutions
* high quality assembly equipment
* optimum assembly of couplings on the hose
* test facility (up to 3000 bar)
* material and test certificates
* on-site hose testing
* research & engineering
* certified welding
* C.N.C. machine park
Private branding
* RX-hoses
* LMC couplings
|
|
Tube: NBR, black, smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: orange NBR blended, ozone and weather resistant and abrasion-proof, smooth
Application: for conveyance of liquid gas, home burner system, grill,oil-resistant
Temperature: -35℃～+90℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
... see all the products in the category
Hoses
|
|
|
