|
|
| The "EL" Series with its high performances 40/43 Hp power, is used for the drain and the sewer cleaning equipments, for washing of city solid waste container of medium sizes, car washing, for medium industrial filter presses cleaning, for sweeper and cleaner street. We have extended the range with version ELR with 1500 rpm. gearbox. |
|
| The "ECH" Series has been studied for the cleaning high performances up to 500 Bar. This range is normally used for water jet blaster, for ship -monuments-building- cleaning and rot jet equipments. This model need 40 Hp power. |
|
| The "GLR" Series, with requested power of 73/75 Hp and at 1.500/1.800 rpm gearbox. We have constructed the GLR in orderr intemediary performances between the EL an to the SLR pumps. The GLR is destined to the sewer jetting cleaning application, and the heavy industrial cleaning, where great reliability is priority. |
|
| The "C" Series need 25 Hp power, is used for the washing of city solid small waste container, equipments for filter presses washing and tanks cleaning. |
|
| The "SLR" Series, with high performances requested 110 Hp, and 1.500/1.800 Rpm gearbox, is used for jetting drain and sewer cleaning equipment, for filter presser cleaning, for industrial washing plants. The good project, the optimal materials employed, have produced the SLR pump with high characteristics of performances and reliability. |
|
| High volumetric efficiency. Self-priming and venting. Low pulsation. Low noise level. Long life. Specially suitable for demanding applications with continuous pressures up to 1000 bar. Combination with low pressure gear pumps possible. |
|
| ... products without technical information |
| |
Beyond Screw Compressors
Higher efficiency(30% over screw compressors) , no oil system, less noise(85dB @1m) , no vibration, compact size without gear box, no scheduled maintenance, and competative price are realized to our products through our innovative technology of air foil bearing, sensorless inverter, high speed PM motor(95% of efficiency) and cast impeller. |
|
Beyond Screw Compressors
Higher efficiency(30% over screw compressors) , no oil system, less noise(85dB @1m) , no vibration, compact size without gear box, no scheduled maintenance, and competative price are realized to our products through our innovative technology of air foil bearing, sensorless inverter, high speed PM motor(95% of efficiency) and cast impeller. |
|
Advantages of JAB - High Pressure - compressors
Compact construction style
Most effective cooling system
Low compressed outlet temperature
High volumetric efficiency
Maintenance free oil and water separator for all pressure stages with automatic discharge
Oil pressure lubrication including pressure control
Pressure gauges for all stages and oil pressure
Safety valves for all pressure stages
Long life time of valves
Vibration free 3-point assembly
Suitable for air and neutral gas
High quality, robust and reliable
Efficient, economic, easy maintenance |
|
The medium range compressors of JAB do not pretend to be sophisticated low-pressure compressors, but individual devices that have been developed with the knowledge we gained during the construction of our compressors with a performance up to 350 Bar.
The main characteristics of these machines are oil pressure lubrication, oil pressure control, oil pressure monitoring, shut down in case of lack of oil, oil and water separation with automatic discharge and condensate separation as well as very low noise emitting values.
|
|
The model HIHPG3-20147 Package is a two-stage unit that
can boost 100 PSI Shop Air up to 4500 PSI and also be
powered by shop air. The advantage is no dependence on
nitrogen cylinders. Disadvantages are considerably slower
fill speeds (Even with a 10 H.P. air compressor), and the need
to Chemically Dry the air to -50°f dewpoint or better before
being boosted. |
|
Axial compressors can be used for volume flows of up to 1,400,000 m³/h and pressures of up to 20 bar.
|
|
Centrifugal compressors are extremely robust machines that can be built for the compression of various gases.
Centrifugal compressors are used in a wide range of industries. MAN TURBO offers specific solutions tailored to the customer specification for various applications:
Oil and gas industry (up-, mid- and downstream)
Air separation plants
Chemical industries & Petrochemicals
Iron & steel, mining
Paper industry.
|
|
| Isotherm compressors are single-shaft centrifugal compressors with integrated cooling. They are suitable for process air with minimal energy consumption. |
|
To compensate for the pressure loss that occurs when natural gas is transported long distances in pipelines, pipeline compressors are used to recompress the gas to its original line pressure. In extensively branched pipeline networks in particular, there is a need to vary the amounts of gas transported and the pressure conditions considerably at the compressor stations. This in turn makes high demands on the flexibility of the compressors, which should exhibit a high level of efficiency over a wide range of performance characteristics.
|
|
These directional seated valves use spring loaded balls as valve elements and therefore do not show any leakage. They are manifold mounting and are available with various actuations which always act on an angled lever pushing the valve element in the desired switching position.
The basic versions are designed as 2/2- and 3/2-way directional valves. 3/3- , 4/3-way functions are possible, if two valves are housed in one valve body, whereas 4/2-way functions require an additional intermediate plate. The enforced versions G39, G49, G..-22 are intended for pulsating, permanent load with frequent switching operations in the high pressure range.
These valves may be directly installed in pipe systems, when equipped with subplates enabling pipe connection. Many optional functions can be incorporated in these sub-plates e.g. pressure limiting valve or restrictor check valve for widen the field of application for this valve type. Valve banks of these valves are also available featuring several valves
connected in parallel (see type VB).
|
|
Minimum weight. Good price-performance ratio. Spool design. Ready for installation.
For single and double-acting applications, for direct installation to hydraulic units. |
|
| The seated valves are direct operated. The balls which are situated in the cartridge are pressed on the valve seat via springs or are opened via tappets. Hardened balls and valve seats ensure long life. |
|
| The seated valves are direct operated. Depending on the desired control function up to four valve cartridges are used. The poppets which are situated in the cartridge are pressed on the valve seat via springs or are opened via tappets. Hardened poppets and valve seats ensure long life. Pressure compensated poppets reduce the operating power. |
|
For your stationary hydraulic installation, KRACHT offers a complete programme of hydraulic components: Industrial valves, pumps, cylinders and accessories. One hundred per cent safety of the components in operation and material function is absolutely vital here. Our engineers' many years of experience and competence guarantee that this requirement is met correctly and in the best possible way.
KRACHT employees demonstrate their know how and commitment every time they take decisions regarding the general field of application and the specific use of valve types of completely different designs, and in the case of the in-house construction of cylinders which can satisfy the most demanding requirements. This result in the optimal realisation of special concepts for client-specific needs. |
|
For your stationary hydraulic installation, KRACHT offers a complete programme of hydraulic components: Industrial valves, pumps, cylinders and accessories. One hundred per cent safety of the components in operation and material function is absolutely vital here. Our engineers' many years of experience and competence guarantee that this requirement is met correctly and in the best possible way.
KRACHT employees demonstrate their know how and commitment every time they take decisions regarding the general field of application and the specific use of valve types of completely different designs, and in the case of the in-house construction of cylinders which can satisfy the most demanding requirements. This result in the optimal realisation of special concepts for client-specific needs. |
|
High Volume
CHEM-PRO C2 features: PVDF Pump Head, Adapters and double ball valves; digital LCD touch pad control; variable speed motor adjustable from 1 - 100% in 1% increments, smooth operation no hammering; priming/de-gassing valve aids priming under pressure and removing gas from system; powder coated aluminum housing, NEMA 4X / lp66 rated enclosure; Full stroke every time avoids vapor lock; DFD built-in Leak Detection System senses diaphragm failure and shuts off pump.
CHEM-PROTM C2 can be ordered with low flow diaphragm for output to 97 LPH. The high flow diaphragm has maximum 142.7 LPH output, both have 10.3 bar maximum working pressure. |
|
HydraCell piston diaphragm pumps are very compact and low-maintenance. By their almost pulsationsfreie and run-calm mode of operation differ this poetryless pumps substantially from conventional pump systems.
The most promotion and dosing tasks are mastered by rotary pumps, multi-level centrifugal pumps, Exenterschneckenpumpen or diaphragm metering pumps only with a very small efficiency.
VERDER HydraCell pump does not only supply to you with an efficiency of over 80%, but is also a economical alternative to well-known reciprocating and rotary pump systems. The high efficiency our VERDER HydraCell pumps is the crucial factor for the small life cycle costs (LCC). |
|
| ... products without technical information |
| |
|
|
see the results for the following category
